Unable to browse around...

I hadn't logged in for a while... Yesterday, I needed [something] so I decided to eBay it... Problem: Now, the site is jam packed with poorly script advertising... I have a quad-cores CPU with 8Gb ram and I'm not even listening to music or doing anything else than browsing... I updated Java and Flash last week... Yet, Windows Task manager report that this single tab browser is consuming 3Gb+ ram and 60%+ of CPU resources... Though was a bug or something, so closed it and tried again, but getting the same readouts after less than 2 minutes browsing... Yesterday, I had a similar experience while browsing, it was laggy as hell, but I still could make searches or such. Now, today, it's a nightmare...

I hadn't logged in for a while... Yesterday, I needed [something] so I decided to eBay it... Problem: Now, the site is jam packed with poorly script advertising... I have a quad-cores CPU with 8Gb ram and I'm not even listening to music or doing anything else than browsing... I updated Java and Flash last week... Yet, Windows Task manager report that this single tab browser is consuming 3Gb+ ram and 60%+ of CPU resources... Though was a bug or something, so closed it and tried again, but getting the same readouts after less than 2 minutes browsing... Yesterday, I had a similar experience while browsing, it was laggy as hell, but I still could make searches or such. Now, today, it's a nightmare...

Similar Messages

  • Windows 7, Itunes 10.3.1.55. "iTunes is unable to browse album covers on this computer".

    I just built a new Computer and sucessfully moved my iTunes Library and music over (Windows 7, Itunes 10.3.1.55).  I am getting a message on the cover flow view that states, "iTunes is unable to browse album covers on this computer".  This Cover Art is showing in all other views, so it is there.  I upgraded QuickTime and even install Safari.  This did not work.  I have a very large music collection and prefer the coverflow navigation.  Any suggestions on how to fix this?

    I too am having a very similar problem with cover artwork in Itunes version 10.3.1.55 for my Windows 7, 64 bit computer. Certain Artists or Albums cover art will not show up and also when I try to manually add my own cover to the album it does not save. I can however, view with the coverflow option but its useless without all the cover art. I would greatly appreciate any help with fixing this very annoying problem.
    I've looked into the direct x suggestions and that doesn't seem to be the problem. Thanks anyway, Polydorus.

  • Itunes says it is unable to browse album covers on this computer

    I just upgraded my itunes version to the newest available. when i try to use the feature that when you skip through your library it shows the album artwork flip by. I let my computer run all night getting the artwork and when it finished it just has across the screen "itunes is unable to browse album covers on this computer"
    please help

    lizzy17,
    You'll have to go back and check the specific graphics card you have (step 5 of the instructions).
    If it's one of the following -
    Mobility™ Radeon® X1800 XT
    Mobility™ Radeon® X1800
    Mobility™ Radeon® X1600
    Mobility™ Radeon® X1400
    Mobility™ Radeon® X1300
    Mobility™ Radeon® X800 XT
    Mobility™ Radeon® X800
    Mobility™ Radeon® X700
    Mobility™ Radeon® X600
    Mobility™ Radeon® X300
    Mobility™ Radeon® 9800
    Mobility™ Radeon® 9700 series
    Mobility™ Radeon® 9600 series
    - you should be able to proceed from here with step 10 of the instructions.
    Post back if you need any more clarification.

  • Opening my Ipad I have an exchange window asking me my password. I'm (almost)sure I type the good one but it doesn't accepIt it. Unable to go around that window so IPad useless. How can I check/change my password with my IPad (stuck) or my home computer ?

    Opening my iPad2 I have an "Exchange " window asking me my password. I'm (almost) sure I type the good one, but it doesn't accept it. Unable to go around it, so iPad useless... How can I recover/check my password on my home PC (or make that window disappear ?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Clicking/Browsing Around iTunes Store - Unexpected Quit

    Hello all.
    I know there is another similar and long post in this section talking about similar things, but thought I just start another fresh post with a "narrower and specific" problem:
    *My iTunes will quit out unexpectedly when I start clicking around/browsing around the store;* I was only in the Music section, trying to look for Madonna's latest unreleased album, and when I did a search in the search field and click to show all the albums by Madonna, iTunes quit.
    But last night I was in the store, buying a soundtrack and a movie, and everything seems OK
    Thanks and cheers

    I am having the exact same problem! Everything works fine most of the time, but since upgrading to iTunes 9, it randomly quits every now and then when I'm browsing/searching in the iTunes store. Probably a bug in iTunes 9. On a similar note, my iPhone has been randomly shutting itself off every now and then since the upgrade to 3.1.

  • Unable to browse mysite in SharePoint 2013

    HI All,
    I Configured MySite in SharePoint2013,once i clicking on News feed i am getting access required "Let us know why you need access to this site. " i am unable to browse the MySite,but i can able to access only from farm service account only.
    Can any one help on this. Configuration every thing is fine.

    Check the following things:
    1)You have included wild card inclusion for web application
    2)User Profile Service Application, Managed Metadata Service, and
    Search Service Application are running for particular web application
    3)Self-Service site creation is enabled for web application
    4)In permission policy ,add permission policy level and grant permission to create subsites
    5)In user policy add everyone for all zones and choose permission policy create in step 4
    6)Check if User profile service and user profile synchronization service is running,and users are synchronized
    I guess the issue is due to user profile synchronization as mysite generally appears for admin account who don not require synchronization.
    check the following link to verify your configuration
    https://www.nothingbutsharepoint.com/sites/itpro/pages/sharepoint-2013-creating-and-configuring-mysite.aspx
    Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

  • I am unable to browse my album covers

    I am unable to browse my album covers in itunes. What can I do to resolve this problem

    Does this help?
    http://docs.info.apple.com/article.html?artnum=304402

  • MiFi 4510L Problems - unable to browse web but can ping !

    Have had stationary 4510L for months since my local store rep convinced me to upgrade my perfectly good 2200. Wish I had never done so. First the 4G/3G connect issues kept me from working until the recent firmware patch was finally released. But mixed in with that issue is another one that has gotten progressively worse.  Three replacement devices and two new SIM cards later and I still have the issue.  After three (alleged) trips to the tower reporting no issue, I decided to take the MiFi on the road to see if I have same issues on another tower.  I do.  Anybody else seen these symptoms or have any suggestions?
    1) Browsing fine, usually in forced 3G (EVDO) mode due to earlier issue resolved by firmware upgrade.
    2) Suddenly web sites stop responding with timeouts, or server unavailable, or web site taking too long to respond messages (depending upon browser in use).
    3) WiFi connection is good and I can browse locally to access modem.
    4) Modem states to be connected and not dormant, with decent EVDO signal strength.
    5) Connection log shows some TCP and UDP traffic.
    But cannot browse anywhere.  The only fix is to disconnect and reconnect.  Then it all works fine.  The WiFi connection is never lost. Don't need to reset the modem, just drop the call and then reconnect.
    Logged 12 to 15 calls on this and have not gotten satisfactory response yet.  Spent hours and hours collecting data on dates, times, screenshots, etc.  Two very interesting things that I think would be indicative of issue:
    1) Even though I can't browse web sites, I can ping them !!
    It's as though internet layer protocols are working but transport layer are not.  When I can't browse, I also lose my VPN  connection (if a session was established). Cannot reconnect VPN, says the server does not respond, but I can ping it!
    And in the Connection Log, I can see the ICMP traffic from the ping, along with TCP and UDP.  Yet cannot browse to any website.
    2) Once this problem occurs, the clock starts to drift from real time.  The time stamps in the Connection Log and in the System Log are a few minutes off, then ten to fifteen minutes off, then withyin a few days they are an hour off.  They occasionally show 1980!!  A hard reset re-synchs the timestamps to the system clock.
    *ANYBODY* have these symptoms or any suggestions?  And if you have issue where browsing stops, but WiFi is still wokring, try pinging the website and see if you get a response.  I'd like to hear form you.

    I have the *exact* same problem.  Been happening for months and nobody at Verizon has a clue.  I am going insane!!!  My problem is especially worse when I have more than one WiFi client connected.  "Stop browsing" means unable to browse the internet.  I can still browse on the local MiFi private network fine.  Just can't browse thru the Verizon network!
    One laptop will stop browsing (but can still ping!!) while the others are working just fine.  Dropping the wireless and reconnecting doesn't fix it.  Rebooting the laptop doesn't fix it. 
    One client can browse but the other can't (but both can ping) and there is nooooo way to fix it but disconnect the call and then reconnect.  FRUS.STRAT.TING !!!!! 
    Happening now five or six times per day. We may have two to four laptops connected at any given time. Mostly we just do w/o internet on the clients when they stop browsing.  The other laptops will continue to browse for quite some time.  Eventually, when the working systems have an opportunity, we have to drop the MiFi call and reconnect to restore internet to everybody.
    THIS IS KILLING ME.
    I cancelled my voice service this week and transferred to ATT.  T-mobile has a $40/month 5GB plan that does not charge for overages.  I'm considering switching to that.  Verizon, how many customers will you lose before you get your act together?
    MiFi 4510L - replaced twice, latest one is three weeks old
    Modem Firmware - 2.16.07 (the latest),
    Using EvDO with better than -80 signal strength

  • Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi

    Hallo,
    I just installed LabVIEW 8.2 DSC-Module and tried to configure a OPC Client Instance. I get the Error "Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi". I have no OPC-Server installed, but is there no Demo-Server?
    Thank you
    Thomas

    This issue might be related to opcenum not being registered correctly. Please follow the steps explained in this document to fix this problem.
    As OPCdemo follows the OPC 1.0 standard it is not supported by the OPC client in LV DSC 8.x which supports OPC 2.0 and 3.0 servers. You can download an OPC 3.0 compliant demoserver from Matrikon.
    I hope that helps,
    Jochen Klier
    National Instruments Germany

  • Unable to browse internet with wag150n

    I recently installed a wag-150n wilress-N ADSL2+ Gateway. I replaces a working 2WIRE router with this one. I ran the setup CD, and it said it completed successfully. I am unable to browse the internet wirless;y or with a wired connection.
    If I try and ping a website, say www.google.com,  it replies successfully but I cant browse the internet.
    Both wired and wirless connections are getting an IP address. I had changed the IP ad DHCP ranges to 192.168.0.0/255.255.255.0 , so that the router is at 192.160.0.1. The clients are starting at 192.168.1.100.
    Help!!!!

    If you are able to ping the websites address it means your Gateway is configured for Internet Access...Try to adjust the Browser settings...
    Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...See if you have Internet Access...
    Also if you have changed the router's address to 192.168.0.1, your clients should start at 192.168.0.100...

  • Unable to browse internet over wifi on my iphone

    I am unable to browse internet on my iphone 4 and ipad3 simultaneously over wifi.
    Both iphone and ipad show connected over wifi but only my ipad can connect to internet. Along with ipad I have no problem in connecting laptop and my other android phone over wifi and browse but iphone won't.
    I am using talktalk broadband. Please help

    Does your phone receive a valid ip address from your router?
    Does it work fine when connected to other wifi networks?  If so, then I'd say your router is the culprit.

  • Connected with wifi but unable to browse internet on my iphone 4

    my iphone 4 is connected with wifi anf it shows proper connectivity but i am unable to browse internet on my device ,i have tried many things suggested by apple support forum and nothing has worked for me so for. i have reset settings for network many times. also this wifi is working fine on my mac and other IOS devices.

    I would verify each smtp setting in the settings email account with the settings
    provides by the email provider to verify that those still matched

  • After Update Unable To Browse Internet On WiFi

    Since the update to my Charge I am unable to browse the internet through a WiFi connection. All I get is "Web Page Unavailable". I know that the connection is working correctly as I use it on other computers. Not to mention when I am connected to the WiFi connection, the apps i have installed on my Charge function correctly such as the App Store and I am able to download and update apps through Wifi. The only issue is when I am trying to use the browser to connect to web sites. I have tried the stock browser as well as Dolphin with no luck. Help!

    Thanks JCO 23
    I too was unable to browse the internet on WiFi.  I tried many of the solutions I found on different discussion threads.  I read your solution and decided to give it a try.  Unbelievable, I did have text in the proxy setting.  Checking on my PC I determined I did not require a proxy number.  So, I erased the proxy number and I am now able to access the internet through WiFi.
    Thank you very much for posting this solution.               

  • Music Store - Unable to Browse

    Since upgrading to version 6 I have been unable to browse genres in iTunes Music Store. Attempts raise a Flag stating "Could not complete the Music Store request. Check your internet connection or try again later" Well my internet connection is ok, 2mb adsl and trying again later raises the same flag.
    All other aspects of the Music Store seem to be ok. Should have stayed with iTunes 5 which worked fine for me. Is anyone able to help.

    This topic has been duplicated. Please post comments here:
    http://discussions.apple.com/thread.jspa?threadID=637228&tstart=0
    PowerBook G4 1.33   Mac OS X (10.4.1)  

  • InDesign CS4 -- unable to browse DFS share folders?

    We've recently purchased a slew of CS4 licenses in anticipation for our company's migration from InDesign CS2 to CS4. However in testing we've noticed what appears to be a bug with InDesign. Anytime we use file browse dialog within InDesign CS4(ex. trying to open a new file, trying to import a file into the current .idd, etc..) we run into an issue where we are unable to browse to any DFS network share. The DFS shares are listed, however they are grayed out and unable to be selected. However, the first time InDesign is run, the shares show up correctly and are able to be accessed. When you close InDesign and re-open it, the DFS links are now grayed out and unaccessable.
    InDesign CS2 also had the same issue however there was a workaround available: When browsing for a file in CS2, if you choose the "Use Adobe Dialog" all the DFS shares would then be displayed under the 'Computer' link on the left hand side. However after researching these forums and speaking with Adobe techs there is no such feature available in CS4.
    Normally I would assume this was some type of compatability issue with DFS and Adobe products...however every other program in the CS4 suite works perfectly... it's just InDesign that's giving us problems(and of course, InDesign is the program we need the most).
    Does anyone have any insight as to how we could possibly workaround this issue? Has anyone experienced any similar issues with DFS links being grayed out in InDesign?
    Any help with this issue would be greatly appreciated.
    Thanks in advance,
    Tim

    Thanks for the reply.
    Apparently they have tried waiting (quite a while) before trying the delete but no joy they still have to close InDesign or reboot.
    Message was edited by: elliott-1

Maybe you are looking for