Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009

I am Migrating a application in Visual Studio 2005.
In my development PC I was install the Measurement Studio 2009
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Similar Messages

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009 ,NI DAQ 7.01 and Field Point 6.05.

I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009

I am Migrating a application in Visual Studio 2005.
In my development PC I install the Measurement Studio 2005.
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Running a Maxl Script to build dimensionERROR - 1030100 - Cannot open file:

I calling a Maxl Script to Build dimensions and I receive the following errors:
ERROR - 1030100 - Cannot open file: [D:\Automation\VOLUMES\LOGS\MAXLLOGS\Vol_DimBld.log].
ERROR - 1241101 - Unexpected Essbase error 1030100.
MaxL Script:
spool on to 'D:\\Automation\\VOLUMES\\LOGS\\MAXLLOGS\\VOL_Dim.out';
login hypadmin 'hYp@dm1n' on usorsdv41;
alter system load application VOL_ASO;
alter application VOL_ASO load database VolumeDB;
alter application VOL_ASO disable connects;
import database VOL_ASO.VolumeDB dimensions
connect as 'admin' identified by 'password' using server rules_file 'DimBld'
on error append to 'D:\\Automation\\VOLUMES\\LOGS\\MAXLLOGS\\Vol_DimBld.log';
alter application VOL_ASO Enable connects;
spool off;
logout;
Does anyone have any idea why I am receiving this error?

I figured out why I was receiving this error, I had the file locked via the batch script.

Unable to update to Mavericks, app store shows error downloading, and check purchased items, but I still can't download it.

Unable to update to Mavericks, app store shows error downloading, and tells me to check purchased items. I go there, but I still can't download it.

Hi there Kkoski22,
You may find the information in the article below helpful.
Download past purchases
http://support.apple.com/kb/ht2519
If you are still experiencing issues downloading your purchase, take a look at the article below for information on how to report it to iTunes
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
-Griff W.

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

Unable to open PDF files with Adobe Reader, Mac trying to open files with Quicktime instead, but not succeeding. HELP!

Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!

Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69

I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

I am having iPod classic 120GB Serial Number:8K913VF:2C7
I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

Showing error can't open PAM library

Hello Guys,
Please help me to overcome this error .server is showing the error can't open the PAM library contact system administrator.i heard that i have to install one package to fix this problem that package is SUNnspr.but this package i am not getting any where from sun site .so kindly any body can help me what to do now.shall i install the os again or any other process is there.and the server is also not booting.
Its urgent

Try searching for SUNWnspr in your Solaris CDs / DVD. Its there. Once you find it, use pkgadd to install the package and if you have access to sunsolve, apply the latest nspr patch (I think this patch available for SunOS 5.8 in patch 119209-11, for SunOS 5.9 in patch 119211-11, for SunOS 5.10 in patch 119213-11, for SunOS 5.9_x86 in patch 119212-11, for SunOS 5.10_x86 in patch 119214-11).

Unable to build patched VIM+VIM-Shell / Configure Error with ncurses

VIM-Shell : http://www.wana.at/vimshell/
VIM : http://www.vim.org/download.php#unix
Trying to install and test VIM-Shell with the 7.0 patch against the official VIM sources downloaded from 'the unix directory' under version 7.x, but can't get past a configure issue.
Following the directions at under VIM-Shell > Installation, I've run the following:
$ tar jxf vimshell1.0vim7.0.patch.bz2
$ cd vim70
$ bzcat ../vimshell1.0vim7.0.patch.bz2 | patch -p0
However, ./configure spits out the following:
checking --with-tlib argument... empty: automatic terminal library selection
checking for tgetent in -lncurses... no
checking for tgetent in -ltermlib... no
checking for tgetent in -ltermcap... no
checking for tgetent in -lcurses... no
no terminal library found
checking for tgetent()... configure: error: NOT FOUND!
You need to install a terminal library; for example ncurses.
Or specify the name of the library with --with-tlib.
$ locate libncurses returns the following:
/Applications/VLC.app/Contents/MacOS/modules/libncurses_plugin.dylib
/Developer/Platforms/Aspen.platform/Developer/SDKs/Aspen1.2.sdk/usr/lib/libncurs es.5.4.dylib
/Developer/Platforms/Aspen.platform/Developer/SDKs/Aspen1.2.sdk/usr/lib/libncurs es.dylib
/Developer/Platforms/AspenSimulator.platform/Developer/SDKs/AspenSimulator1.2.sd k/usr/lib/libncurses.5.4.dylib
/Developer/Platforms/AspenSimulator.platform/Developer/SDKs/AspenSimulator1.2.sd k/usr/lib/libncurses.5.dylib
/Developer/Platforms/AspenSimulator.platform/Developer/SDKs/AspenSimulator1.2.sd k/usr/lib/libncurses.dylib
/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/libncurses.5.4.dylib
/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/libncurses.5.dylib
/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/libncurses.dylib
/Developer/SDKs/MacOSX10.5.sdk/usr/lib/libncurses.5.4.dylib
/Developer/SDKs/MacOSX10.5.sdk/usr/lib/libncurses.5.dylib
/Developer/SDKs/MacOSX10.5.sdk/usr/lib/libncurses.dylib
/opt/local/lib/libncurses++.a
/opt/local/lib/libncurses++w.a
/opt/local/lib/libncurses.5.dylib
/opt/local/lib/libncurses.a
/opt/local/lib/libncurses.dylib
/opt/local/lib/libncursesw.5.dylib
/opt/local/lib/libncursesw.a
/opt/local/lib/libncursesw.dylib
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses++.a
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses.5.dylib
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses.a
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses.dylib
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncurses++w.a
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncursesw.5.dyli b
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncursesw.a
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncursesw.dylib
/usr/lib/libncurses.5.4.dylib
/usr/lib/libncurses.5.dylib
/usr/lib/libncurses.dylib
and re-running $ ./configure --with-tlib='/usr/lib/libncurses.dylib' gets me this:
checking --with-tlib argument... /usr/lib/libncurses.dylib
checking for linking with /usr/lib/libncurses.dylib library... configure: error: FAILED

You also need vim-7.0-extra.tar.gz, which is in
ftp://ftp.vim.org/pub/vim/extra
tar jxvf vim-7.0.tar.bz2
tar zxvf vim-7.0-extra.tar.gz
cd vim70
bzcat ../vimshell1.0vim7.0.patch.bz2 | patch -p0
./configure
make
But it seems the patch file has a bug; it introduces a wrong '#endif' into gui.c. If make fails at gui.c, just remove the '#endif' (line 2422).

Documents in my dock are showing up as question marks and I cannot open... please help!!

I save several excel documents on my dock. Today I went to open one of the documents and the files were showing up in my dock as gray question marks. I am unable to open the documents or find them anywhere else on my computer! Please help!!

That may result in losing Dock icons for the Office applications (don't know why it should?) but shouldn't cause document icons in the Dock to disappear.

Ipod nano conflicts- shows different names at work & home, won't open files

Hello.
I have just purchased a nano (after having been satisfied with my shuffle), but I continue to have problems with the device:
I already had the latest itunes software installed both at home and work. Originally, I was unable to transfer songs to my ipod/or back to my library. I took it to an apple store and the technician was able to troubleshoot the problem. He explained that there was a software glitch. Actually, the ipod was renamed at that point to something else. However, this has not solved the issues I continue to experience.
1) When connecting my nano at work, the name of the ipod is completely different than what it was from the APPLE store. It reads: HOME. When I open itunes, it appears that there are no songs at all. However, when I disconnect (safely remove hardware icon and then close itunes), there are plenty of songs on the ipod.
2) While at home, I can not transfer any new songs to my library from my ipod. the device remains black at all times, also showing a different name.
3) When trying to access my downloaded songs, I get authorization conflicts
4) I also have a shuffle and I'd like to transfer songs from the shuffle to the nano, but I can't pull any songs from it?
What is going on? Why can I not see my songs at work in itunes? I reset and everything. Why is it named HOME?
I don't want to lose the songs that i have on the system.
PLEASE advise, I have had this for 2 weeks and not being able to really use it is frustrating!
Thanks.

incremental progress!
okay, these resources might be of some help with shifting music between the two computers:
Using iPod with multiple computers
Transferring songs to iPod using iTunes
Copying music between authorized computers with iTunes for Windows
love, b

Sender file comm channel shows error status when no file is in source

Hello,
I have this sender file communication channel which is picking up files using ftp. <b>Its working fine</b> but if there is no file in the source directory during polling, it shows an error status in communication channel monitor. The error message is that directory/file does not exist and also * in file name is invalid character.
I have the same settings on our dev, QA and prod system but this strange thing is happening only on the dev and prod. Its not happening on QA whereas QA access the same directory as dev.
Any idea ???

Hi,
The error is strange one.
I suggest you to check Visual Admin to findout the exact trace/log file.
May be because of some connection problems etc..
Just go thru this SAP Note about File Adapter- 821267
Regards,
Moorthy

Photo Gallery shows error message when opening and closes right after it

Hi,
I have Photo Gallery installed on my computer and my photos are in an external hard drive. At the beginning worked well. But today I tried opening Photo Gallery and it shows an error only giving you the option to click "Accept". After you accept
the error, Photo Gallery closes.
The error goes as follows:
"One or more folders included in Photo Gallery is offline and is preventing Photo Gallery from starting.
Either remove offline folders from Photo Gallery using Windows Explorer, or make sure that all folders are inline and try starting Photo Gallery again"
Why did this happen and how can I fix this, I tried repairing and uninstall/reinstall Windows Essentials and it didn't work.
Help please!, thanks!

Hi,
Consider Windows photo gallery is part of Windows Essentials, we have a better forum to seek help for problems related with that:
Windows Essentials
Additional information about Photo Gallery:
Photo Gallery Help Page
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

Unable to Build VC++ applicatio​n it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPo​int71D.lib​' but I am Using Measuremen​t Studio 2009

Similar Messages

Maybe you are looking for

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009