Unable to change date selections in data selection tab

Hi experts,
I'm new here, i scheduled the init load with date selections in the data selection tab, i successfully loaded the data and now i want to go for the delta but i'm unable to delete the date selection in the data selection tab. what problem is this.
can we load the data with the same selections in delta update ? how can we delete the date selections
orelse nothing happens even if there is a selection in the data selection tab? the date is a past one.
help me out plz
regards

delta loads copy the selections from the init load.
Often while scheduling delta loads u will see a message 'selections copied from the last init load'.
cheers,
Vishvesh
Message was edited by: Vishvesh

Similar Messages

Unable to change Date Created in Metadata

Please help with my first post...
Unable to change Date Created field in Metadata.
I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
Next I have to Import this into Aperture where the Date Created shows as "20090926".
Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
Thanks in anticipation.

Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
or
3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
nathan

Tab Set Label Colors - How do I change the selected tab label color?

No matter what color I tell it to use for the Labels - Selected color I get white. Is this a known bug in the system or am I not doing something correct. I have a tab set component and a label based menu selector component on my display. I've set up the labels and backgrounds for both components exactly the same but I can only get white for the selected tab set label.
Edited by: Maureen LaComb on Feb 19, 2009 5:38 PM

Hi, Maureen
You can set the color of Tab Set by using the Following Steps.
--> Select the Tab Set
--> From the the Properties Window
--> Select Appearance
--> There are Two Tabs "Text" and "Color"
--> From the Color Tab you can Select the Background Color
--> Tab BackGrounds Or Labels from here you can select the color.
But this setting will Apply to all the Tabs in a Tab Set, I think you can't set the Specific Setting for a single Tab in a Tab Set.
Please Reply if any Issue,
Kind Regards,
Faisal

Z22 Unable to change date in Preferences

My Z22 works fine except that I am unable to set the date in the Preference screen. When I do correct the date and press "Done" it goes back to 01/02/2005. I am able to HotSync OK and have tried a reset with no luck.
Post relates to: Palm Z22

Hi.. Welcome to the Palm forums. If I am understanding this correctly you can change the time but as soon as you leave the screen, save the changes, it referts back to /1/02/2005. Now you state you did a reset, I'm assuming you mean you pressed the reset button on the back. That is whats called a soft reset, like rebooting your computer. What I would recommend is to do a hard reset. Be sure you have synced your data as this will delete all data on your device. Then before you sync data back to your device test the data and see if it holds. If so sync data back and test again to insure its not some software that has been installed when you resynced causing the problem. If you need instructions on how to do a hard reset go to http://kb.palm.com/SRVS/nua/launchKB.asp?c=887

Unable to change Data label position in the Chart using Position from Properties

Hi All,
I am trying add the Data label to the chart and the users want them to appear on the top of the stacked bars. By default when I enabled the data labels it showed up in the middle. When I tried to change the position by doing
View --> Properties --> Position --> Top/Bottom/any of other 8 options -- it does move a bit
I even tried deleting chart and recreating it.
What am I missing? Thanks in advance.

Hi Ranjith_SQL,
According to your description that you have add the Data label on your stacked column chart which by default display in the middle of the chart, you want them to appear on the top of the stacked column chart, right?
For a Stacked Column Chart, the data labels are always placed in the center of the Series bars. This is by design. I also test it on my new version of SSRS 2014 and find have the same result.
If you really need the data label to display on the top, I recommend you to change the chart type to column chart which by default have the Data labels display at the top of the column:
You can also submit an wish at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thanks for your understanding.
Regards
Vicky Liu

Unable to change data source of any report

Hello there,
I am using the Crystal Reports Eclipse plugin. I added a datasource to Eclipse 3.3 which connects to a Oracle database using JDBC.
Now I want to change the data source of a report. I get a popup window which displays the old data source with all tables and columns on the left side. On the right side of the window I see the name of the new data source at the top, but a list of "remove" options below it with a red cross in front (see screenshot).
It does not matter if I want to change an existing report or a new report.
I can create a new report with a datasource, but even when I want to change to the same datasource as already assigned to the report, I get the problem described above.
I already followed some tips found in this forum, e.g. expanding all used tables in the data source explorer etc., but this did not help.
I know that there was also a possibility to remove the "data source" information completely from the query (as mentioned at http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do;jsessionid=2F140BDBA03E8E97EEF1E15F84964F12?cmd=displayKC&docType=kc&externalId=c2017570&sliceId=&dialogID=13402443&stateId=1%200%2013406567), but I cannot find this option in Crystal reports for Eclipse. I see a field "qualified name" in the properties of each table of my report, but this field is read-only...

Doesn't anyone have an answer to this problem? I would just like to change the datasource of a report. But I am not able to do so, because the only option I have in the dialog is to remove all tables.
I just saw that the screenshot is missing. See it here:
http://img119.imageshack.us/img119/4999/pic1dh1.png

Unable to change data source at runtime

I have a simple Crystal Report based on a MS-SQL stored procedure that takes one parameter. I developed it against my dev database, so when I run the application, I want to point it at our production database, but no matter what I do, it always calls the stored proc in my dev database. Here's what my code looks like:
// Code to set data source and launch report in viewer
CrystalDecisions.Web.Report cr = new CrystalDecisions.Web.Report();
cr.FileName = "UniformSizesByProject.rp";
this.crsource1.Report = cr;
this.crviewer1.RefreshReport();
this.crviewer1.EnableDatabaseLogonPrompt = false;
ParameterFields pfs = new ParameterFields();
ParameterField pf = CreateParameterField("@Project_ID", _projectID);
pfs.Add(pf);
this.crviewer1.ParameterFieldInfo = pfs;
this.crviewer1.ToolPanelView = CrystalDecisions.Web.ToolPanelViewType.None;
this.crviewer1.LogOnInfo.Clear();
CrystalDecisions.Shared.TableLogOnInfo logon = GetReportLogonInfo(ConfigurationManager.ConnectionStrings["PMEntities"].ConnectionString);
this.crviewer1.LogOnInfo.Add(logon);
private CrystalDecisions.Shared.TableLogOnInfo GetReportLogonInfo(string ConnectionString)
     CrystalDecisions.Shared.TableLogOnInfo logon = new CrystalDecisions.Shared.TableLogOnInfo();
     CrystalDecisions.Shared.ConnectionInfo connInfo = new CrystalDecisions.Shared.ConnectionInfo();
     connInfo.ServerName = "(MyServerName)"
     connInfo.DatabaseName = "(MyDatabaseName)"
     connInfo.UserID = "(MyUserId)"
     connInfo.Password = "****"
     return logon;
When I debug, I can verify that the LogOnInfo object is set to use my production server, the resulting output proves it is still running against my dev server. I haven't run into this in similar apps I'm working with and the only difference with this one is that it's using a stored proc rather than command SQL or hitting the tables directly.
- Robert -

Hi Robert,
Take a look at the SAP Note "[1553921 - Is there a utility that would help in writing database logon code?"|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333933323331%7D.do]
The utility provided in above SAp Note will generate the logon code for your existing report, update the logon information of the target database in the code.
Also search for the sample application 'change database at runtime' in top right corner search box.
Hope it helps,
Thanks,
Bhushan.

Unable to change column width dynamically in cross tab report.

Hi,
We have developed cross tab layout using template builder v.10.1.3.2.1 in EBS.I am trying to increase column width dynamically and the width is coming xml.
i looked at document and found one command <?split-column-width:name?> for the same.i tried but it is not increasing the size of one column.
Output
column1 column2 column3 .......
Row text1 10 20 30
Row text2 40 50 60
I want to inrease the size of column for row text1 and row text2.
Need help in this.
Thanks,
Mahesh

Is the field that holds your width value called "name"?
Can you send me the xml and RTF template to [email protected] and I can take a look.
Thanks,
Bipuser

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

Change selected tab when move from one view to another

Hi all,
I have a tabbedviewnavigator application where I have 5 tabs in it. So, the first tab contains the first view of the application, e.g. HomeView. Inside this view, I have a button where upon clicking it, it will push to the second view which is sitting in the second tab.
How do I change the selected tab index upon clicking the button? Because right now the selected tab is till on the first tab. Please help.
Best regard,
Victor

When you set selected index of 2nd tab, try to set focus on of any control in 2nd tab. It might happen that if you don't set focus on of any control tab may not change.

Stopping right click selecting tab in JTabbedPane

Hello all,
This may be a really simple thing + I'm probably being thick, but is there a way to prevent a right click changing the selected tab on a JTabbedPane.
I tried consuming the MouseEvent, but that didn't seem to work. Couldn't find an answer anywhere else in the forums & couldn't see anything in the JavaDoc that looked as if it would help.
Answers on a postcard please......
RT

You might be able to extend JTabbedPane and override setSelectedIndex().
I had to do this to work around a focus issue I had.
This class extends JTabbedPane to correct a problem where it doesn't
request focus when clicked on.
import java.awt.*;
import javax.swing.*;
public class MyJTabbedPane extends JTabbedPane {
public void setSelectedIndex(int index) {
    Component comp = KeyboardFocusManager.
        getCurrentKeyboardFocusManager().getFocusOwner();
    // if no tabs are selected
    // -OR- the current focus owner is me
    // -OR- I request focus from another component and get it
    // then proceed with the tab switch
    boolean noTabSelected = getSelectedIndex()==-1;
    boolean hasFocus = requestFocus(false);
    boolean compIsMe = comp==this;
    if(noTabSelected || hasFocus || compIsMe) {
      super.setSelectedIndex(index);
}

How to change date format in select-option (mm.yyyy).

Hi,
Plz, How to change date format in select-option (mm.yyyy).
in my selection screen date type selection-option is there ,when i am enter date it's taken dd.mm.yyyy format,but i want mm.yyyy format.
how to set that .
Regards,
Kk.

sorry
parameters : pmonyr type spmon or
select-options : sspmon for PGPL-spmon .
or what table ccontains spmon.
regards
shiba dutta

Change Data Provider Based on ComboBox Selection

Complete noob using Flash CS5 for Macs. I have a ComboBox component and a TileList. I want the ComboBox selection to change the data provider for the TileList. I've used a sample script from the Adobe website at the bottom, but it is not working in this context. Google returns no better examples. Can anyone point me in the right direction?
import fl.controls.ComboBox;
import fl.data.DataProvider;
import flash.display.DisplayObject;
import flash.display.MovieClip;
import fl.events.DataChangeEvent;
// Combo Box ("aCb")
var aCb:ComboBox = aCb;
var Choices:Array = new Array(
    {label:"Artist Resin", data: "resin"},
    {label:"Ceramic", data: "ceramic"}
aCb.dataProvider = new DataProvider(Choices);
// TileList ("aTl")
aTl.columnWidth = 110;
aTl.rowHeight = 130;
aTl.setSize(110,150);
aTl.move(20, 150);
aTl.setStyle("contentPadding", 5);
// TileList Content
var i:uint = 0;
var resinitems:Array = [
{label: "Image 1", source: "http://www.helpexamples.com/images/montreal/images/IMG_5057.jpg"},
{label: "Image 2", source: "http://www.helpexamples.com/flash/images/gallery2/images/IMG_1592.jpg"}];
var resin:DataProvider = new DataProvider();
for(i=0; i < resinitems.length; i++) {}
var ceramicitems:Array = [
{label: "Image 3", source: "http://www.helpexamples.com/flash/images/gallery1/images/pic11.jpg"},
{label: "Image 4", source: "http://www.helpexamples.com/flash/images/gallery1/images/pic14.jpg"},];
var ceramic:DataProvider = new DataProvider();
for(i=0; i < ceramicitems.length; i++) {}
addChild(aCb);
addChild(aTl);
// Code to Change Data Provider for Tile List
aCb.addEventListener(Event.CHANGE, changedataProvider);
function changedataProvider(event:Event):void {
    aTl.dataProvider = event.target.selectedItem.data;

Thanks for your answers.
I have already checked those links.
Now th problem what I am facing is,
I am not able to call the function ChangeLanguage through javascript.
I have created a dropdwon using Hovermenu and added English and German.
Now when I click on these the function should be called.
Please help me in getting how setClientSideScript() can be used to call a function.
or any other way to call the function after clicking on Hovermenu Item.
Thanks in advance,
Sumangala

Change the data selection tab page in an InfoPackage

Hi SDN Community,
Is it possible to have an Infopackage and change the data selection tab page ? Because I would like to know if I can change the select-options by a parameter.
For example: Now you can enter 01.01.1950 as the start date and 31.12.9999 as the end date,
I only want that the user enter the start date.
Thanks a lot,
best regards.
Ana

Yes, I tried an abap routine option and the result is not good because the user can't put the information in the low (start date) parameter.
Thanks

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to change date selections in data selection tab

Similar Messages

Maybe you are looking for