Unable to close Goods Receipt PO with foreign currency

hi all,
When we tried to close Goods receipt PO done in June-08 using Euro currency(Data-->Close)
System is throwing error message
"No matching records found  'G/L Accounts' (OACT) (ODBC -2028)  [Message 131-183]"
What might be reason for error message ?
As we already did manual JE to reverse Goods receipt PO.
Expecting you all valuable replies.
Jeyakanthan

Hi,
Define the Goods clearing account.
When closing a Goods Receipt PO manually B1 will post to Goods Clearing.
Hope it helps.
Jesper

Similar Messages

  • How to close goods receipt PO

    Hi All,
    We are using SAP 8.8
    how to close Goods Receipt PO that has been pulled to A/P Invoice with a partial amount of freight ?
    i.e.
    Our GRPO has freight 5000.
    On pressing COPY FROM button in A/P invoice we selected that GRPO
    On Pressing Customize button
    Items in the GRPO appear
    We selected all items and press next
    Freight appears
    We edited freight amount from 5000 to 3000 and pulled GRPO into invoice and saved.
    After this OUR GRPO and freight remains
    Guidance in this is really needed as we want to tally stock
    Thanks
    Malhaar

    Hi Malhaar......
    Does it happen all the time like this reversal of entry?
    Like how you tested in demo this kind of scenario I would suggest you to do this excercise too.
    So that you get knowledge about that and Today you are asking this doubt but after doing this excercise you will come to know the exact effect and next time you can suggest this to others if he has same problem and will become expert in SAP
    All the Best
    Regards,
    Rahul

  • Goods Receipt Report With 101 movement type using bapi_goodsmvt_create

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

  • Stock account with foreign currency

    Hello ,
    I have a problem about stock account with foreign currency.
    We use standart price and material legder is active.
    Our local currency is TRY. We have both TRY , EURO and USD standart price  in material master .
    I created PO with EUR currency.
    When I make GR , system posted standart price to stock account with TRY correctly. But it's again calculated euro price with daily rate and posted new price to stock account.
    I have a Euro standart price . Why system is again calculated with daily rate for stock account?
    thanks,

    solved

  • Query help on Goods Receipt Query with AP Invoice

    Looking for a little help on a query.  I would like to list all the goods receipts for a given date range and then display the AP Invoice information (if its been copied to an AP Invoice).  I think my problem is in my where clause, I plagerized an SAP query to show GR and AP from a PO as a start.  SBO 2005 SP01.  Any help would be great appreciated.  Thanks
    SELECT distinct 'GR',
    D0.DocStatus,
    D0.DocNum ,
    D0.DocDate,
    D0.DocDueDate,
    D0.DocTotal,
    'AP',
    I0.DocStatus,
    I0.DocNum ,
    I0.DocDate,
    I0.DocDueDate,
    I0.DocTotal,
    I0.PaidToDate
    FROM
    ((OPDN  D0 inner Join PDN1 D1 on D0.DocEntry = D1.DocEntry)
    full outer join
    (OPCH I0 inner join PCH1 I1 on I0.DocEntry = I1.DocEntry)
    on (I1.BaseType=20 AND D1.DocEntry = I1.BaseEntry AND D1.LineNum=I1.BaseLine))
    WHERE
    (D1.BaseType=22 AND D1.DocDate>='[%0]' AND D1.DocDate<='[%1]')
    OR (I1.BaseType=20 AND I1.BaseEntry IN
    (SELECT Distinct DocEntry
    FROM PDN1 WHERE BaseType=22 AND DocDate>='[%0]' AND DocDate<='[%1]'))

    Hi Dalen ,
    I  believe it is because of the condition
    (D1.BaseType=22 AND D1.DocDate>='%0' AND D1.DocDate<='%1')
    OR (I1.BaseType=20 AND I1.BaseEntry IN
    (SELECT Distinct DocEntry FROM PDN1 WHERE PDN1.BaseType=22 AND DocDate>='%0' AND DocDate<='%1'))
    Try changing
    D1.BaseType=22 OR D1.DocDate>='%0' AND D1.DocDate<='%1
    PDN1.BaseType=22 OR DocDate>='%0' AND DocDate<='%1'))
    Lets see what would be the result . Lets have some fun with troubleshooting
    See what would be the difference in the result .
    Thank you
    Bishal

  • Goods receipt MB01 with serial number problem

    Dear MM Experts,
    Iam a PM Consultant and this problem faced me while doing goods receipt from external maintenance order so i will appreciate any help regarding this issue,
    In serial number profiles i did the stock check indicator to give an error message if there were incosistinces in stock data,
    now this is the scenario:
    after doing an external maintenance order and creating a PO with reference to the maintenance order PR, and also entering the specified serial number in the PO:
    1) Goods Issuing: i used MB1B with movement type 541 and as the serial number already exist and not wrong so it didnt show any error messages and by checking the stock data in MMBE the material was in stock provided to vendor.
    2) Goods Receipt: when using MB01 with movement type 101 and when entering the serial number of the material it gives an error message ALTHOUGH it is the same serial number issued and the same serial number in the PO
    This is the error message :
    Stock data of serial number G081 not suitable for movement
    Message no. IO231
    Diagnosis
    The current stock information for the serial number G081 contradicts the stock information of the movement to be posted. The following stock information is valid for the document and the serial number:               Batch Number Stock data Serial data   C2
    Only the first different field for the stock data/serial data is assigned. However, further data may also be inconsistent. To determine whether this is the case, you can start an analysis.
    System Response
    Two system responses are possible (set using Customizing): If the case of an error occurring, the assignment of the serial number to this posting procedure is not possible. In the case of a warning, you can, if necessary, transfer the notification.
    Procedure
    Assign a serial number which corresponds in your stock information to the stock data of the posting. You can display the serial numbers which can be used using Select serial numbers.
    Any help is appreciated
    Thanks in advance

    Hello,
    A possibility to fix serial number status is by running the report RISTEQ07 in SE38 transaction. Please run this report as mentioned in the SAP Note 316868 (point 2).
    While running the report please consider following points:
    The report does not set any locks on the records to be corrected, in other words, the report should only then be executed in the correction mode if the master records (within the client) are not being used in another (changing) access.
    During the search for inconsistent serial numbers, the system assumes that the stock segment is correct and the existence indicator might be incorrect.
    In the correction mode, the existence indicator is adjusted (depending on the existence of the stock segment).
    The report provides a test option (LP_TEST); if this option is active,  the system only checks whether inconsistencies exist. Corrections are  only carried out if the test mode is deactivated. Option LP_EXTD for the enhanced check should remain deactivated for the first run. In particular, if no inconsistency is recognized, the run should be repeated with the activated option.
    Another possibility is to create/post a physical inventory document for the affected material and serial number.
    Determine which material serial number is really on stock (physically on stock). You can do this, by either analyzing the history of each Serial Number or by carrying out a physical inventory.
    Before posting the Physical Inventory the stock validation of the serial number profile of the material has to be switched off in OIS2 transaction (if it is switched on).
    When you do this, you will get a Pop-up, please read the long text and execute the report RISERNR9 which is mentioned there.
    After executing this report the inventory can be posted. When this is done please switch stock validation on again and execute report RISERNR9 again.
    Perform this inconsistency correction only when you are sure that no one else is working on the system otherwise it could lead to more inconsistencies while the stock validation is switched off. Check SAP Note 612132 for further details.
    In another words, you have to:
    Create a physical inventory in MI01 transaction;
    Enter a counted quantity in MI04 transaction;
    Define each serial number to each qty on stock.
    I hope this information helps you.
    Good  luck,
    Fábio Almeida
    MM Consultant

  • Error in workflow while linking goods receipt document with parked invoice

    Hi All,
    I parked document using Tcode MIRO, when WF has been executed and goods receipt document has been created.At the time that we tried to link this goods receipt to parked invoice document in the workflow,The problem happens with work item saying the status as Error. See the below error.
    MIRO Invoice: 801061193 2010 Item: 000001     13.09.2010     09:24:58     Error     AP Workflow for MIRO/MIRA Parked Invoice
    Can anyone advice why it is coming so?
    Thanks in advance.

    Hi
    In SWEL go to workflow trace and see what exactly is the error. This error description is too generic to arrive at soln.

  • BAPI_GOODSMVT_CREATE-Goods receipt in with sd-delivery in another plant?

    Hello to all.
    I have a strange situation.
    We use the mentioned bapi to post goods-receipts.
    In this case we use  the movement type 101.
    Inside sap-standard , inside the migo, there is a possibility to do the same, online.
    And also, if a sd-delivery from another plant is present.
    The posting initiated by the migo is more complete as it fills the entire document flow properly.
    I would like to trigger exactly this behaviour in the background, via RFC-call.
    As I now use the BAPI_GOODSMVT_CREATE, the documentary told me, that this is not possible.
    How else can I achieve this ?
    Does anybody know the solution ?
    Will I have to do it via WS_DELIVERY_UPDATE_2 instead ?
    Best regards
    Robert.
    Edited by: Robert Dornfeld on Nov 11, 2011 12:04 PM

    Refer Note 424014 - BAPI: Goods receipt for the outbound delivery
    When you post a goods receipt for an outbound delivery (with reference to a stock transport order) with Bapi BAPI_GOODSMVT_CREATE, you must fill the following fields so that the purchase order as well as the delivery are updated correctly:
        GOODSMVT_ITEM-MOVE_TYPE (Movement type): generally movement type '101'
        GOODSMVT_ITEM-DELIV_NUMB (Delivery)
        GOODSMVT_ITEM-DELIV_ITEM (Delivery item)
        GOODSMVT_ITEM-PLANT      (Plant)
        GOODSMVT_ITEM-STGE_LOC   (Storage location)
        GOODSMVT_ITEM-ENTRY_QNT  (Quantity)
        GOODSMVT_ITEM-ENTRY_UOM  (Unit of measure)
        GOODSMVT_ITEM-PO_NUMBER  (Purchase order)
        GOODSMVT_ITEM-PO_ITEM    (Purch. order item)
        GOODSMVT_ITEM-MVT_IND    (Movement indicator) = 'B'
    Now the order history and the document flow of the delivery are updated. In order to use fields DELIV_NUMB and DELIV_ITEM, you must implement the enhancements of Note 356665.
    If the delivery note number / delivery (field MKPF-XBLNR) is supposed to be updated in the material document header, field GOODSMVT_HEADER-REF_DOC_NO must be filled with the delivery number when you call the Bapi BAPI_GOODSMVT_CREATE.
    The field should only be filled if the delivery number is unique.The delivery is transferred at item level (table GOODSMVT_ITEM, field DELIV_NUMB) so that different delivery numbers can occur in a material document.In this case, there is no unique delivery so that a blank field GOODSMVT_HEADER-REF_DOC_NO would be useful.

  • MIGO Goods Receipt - error with Movement Types on GR from Inbound Delivery

    Hi,
    I am getting an error message when processing a Goods Receipt (MIGO) against an Inbound Delivery with as 2 lines with different movement types, a standard 101 and a 970 (the latter being a user defined movement type for free goods).
    The error message I get is 'Movement type 970 is not allowed; only 101 is allowed
    Message no. BORGR622'
    This error message only occurs with a Goods Receipt against an Inbound Delivery, we are able to process a similar Goods Receipt using MIGO against a Purchase Order, with two different movement types 101 and 970, without any issues. 
    It is only a problem with a GR against an Inbound Delivery which is necessary in our MM solution.
    As anybody and ideas how to resolve this?  I cannot see anything obvious in config, and have not spotted any SAP OSS notes either.
    I should mention that we can process a single line Inbound Delivery and Goods Receipt for the Movement Type 970 also!

    Thanks for the reply.  The Price Control Indicator is 'S'.
    The solution was set up at my company before I joined, but the different movement type is to enable the free goods stock to make a Finance posting to a Bonus Stock GL Account.  Bonus stock sale update the same account.
    As I mention the '970' movement type worked fine with Goods Receipt against a Purchase Order (it was coded into to the user exit). 
    The MM procedures were changed to use the Inbound Delivery matched to the PO, this had a result that when the Goods receipt was posted in MIGO it posted as 101 movement, as the PO number was not being recognised.
    By making a further change to the user exit we able to suggest the '970' movement type, but now get the BORGR622 error I refer to.
    '511' is not possible against an inbound delivery either.

  • Post Goods Receipt(PGI) with custom condition types on purchase order(PO)

    Hi all,
    I am trying to post goods receipt with custom conditions on the PO. One of the custom conditions is freight (delivery cost). The value on this condition will post to a different G/L account (freight provision account, rather than GR/IR).
    My problem is, when posting this GR, the cost center assigned in the PO under 'account assignment' is not used for posting the custom condition, which I really need it to happen.
    Simply put, I want all postings from this PO inherit values in 'account assignment'.
    I have been looking into configurations in automatic posting and condition types, but I still have no clue where I can make it happen. Do I have to use BADI?
    Thanks.

    Delivey cost condition will be posted to accrual accounts not to the cost center.

  • Max Stock & Good Receipt Time with Optimizer

    Hello,
    We are attempting to use the optimizer to maintain a max stock level (Max Stock = 750 ) constraint at a location. We are also using a Good Receipt time (Good Receipt = 1 day) for this location/product. Currently when we execute the optimizer (discrete) the system is exceeding our max stock value we have maintained in the product master because of the Goods Receipt Time.
    For example on 09/15 we have an on hand quantity of 200 units. On 09/16 we have demand for 200 units, bringing our on hand quantity to 0 units. On 09/17 we have a receipt of 950 units to fulfill the demand of 200 units and bring our stock up to maximum level, resulting in a stock on hand quantity of 750 units for this day, which is our maximum stock level for each day.
    However, the receipt of 950 units on 09/17 is in reality received at the location on 09/16, because only one-day transport time is defined. Utilization of Goods Receipt Time is causing us to go over our max stock of 750 units defined. Any ideas how to resolve this issue?
    Thanks

    I would assume max stock level to be a softer constraint compared with meeting the demand on time. Can you confirm what would have happened had you received 950 units one day later, say by decreasing the GR days to 0 ? If the receipt date were pushed out without violating the max the stock level, I would conclude the max soft level to be a soft constraint.
    Also check the result when GR time is 2 days.
    I would also experiment with keeping inital stock on hand beyond the max stock level and watch it fall below max stock level before calling any receipts.

  • Post Goods Receipt Reversal with VL09 for customer returns in WM

    Hi,
         We have performed Goods receipt and stock was putaway with a TO confirmation in WM. Now we want to reverse the goods receipt and the quantity is not in 904 area for returns. How can I get the stock back to 904 from regular storage type with same dynamic bin number as my customer return delivery number? Basically When I do VL09 system complains that it canot find the dynamic bin number which is same as my delivery number. Answer will be rewarded.
    thanks,
    Sarvesh

    the optional solution can be as following steps:
    1) create the bin manually with ls01n: storage type 904, bin name is the delivery number,
    2) reverse with vl09 and a material doc will be created.
    3) check the bin stock with ls24, you will see negative stock in 904.
    4) create TO to offset this negative qty with lt06 with above mentioned material doc. this TO's source bin is just the one in regular storage type.
    5) confirm TO
    6) don't forget to delete the bin created in step 1,  this is because it is created manually but not dynamic bin that will dissapear automatically.
    pls reward if helpful.

  • Unable to post Goods Receipt - Outbound Delivery

    In MIgo when i am selecting Goods Receipt -> Outbound Delivery & enter, the screen replace to Goods Receipt -> Purchase Order. I want to know is there any customizing is re queried.

    Yes.
    You can check it in below config path
    spro>MM>inventory management->settings for enjoy transaction->settings for goods movements (MIGO)-->settings for transaction and refewrence documents
    Regards
    Antony

  • Unable to create Goods Receipt for Scheduling agreement

    Hi,
    I am have setup Scheduling agreement. When i try to create the Goods receipt on MIGO by entering the agreement #, I get an error : Purchase Order not yet released.
    Please help, I couldn't find similar issue reported on this forum.
    Thanks
    Ramya

    Release SA by T-code ME35L , If it's PO Release by ME29N

  • Goods Receipt 511 with message QM Only QA495

    Hi experts:
    I'm trying to do an 511 movement for a material, but appears the following message "Change the inspection stock of material 000000000000425217 in QM only".
    My material has inspection typ :
    01 - Goods receipt inspection purchase order
    05 - Inspection for other goods receipt
    08 - Stock transfer
    Checking the inspection type for goods movements  (Quality Management ==> Quality Inspection ==> Inspection Lot Creation ==> Inspection for Goods Movement) I can check that 511 movement has inspection lot origin 05..
    Somebody can help me?

    Check whether 05 inspection lot is already created.Check the stock type when you are doing movement.It should be "Quality " & not "Unrestricted"'
    Also make sure that in OMJJ what are allowed T codes.

Maybe you are looking for