Unable To Communicate With Printer HP Officejet Pro 8600 (Network)

I recently purchased an HP Officejet Pro 8600. One morning a couple weeks ago I tried to print something and I received a prompt saying "Unable to Communicate with Printer (Network)". I turned off the printer and turned it back on which did not help, I then turned off my wireless network, turned it back on and still nothing. I finally figured out that I first have to turn off the printer, then turn off my wireless router wait thirty seconds, turn the router back on and the turn the printer back on. After these steps my printer was working. The next morning the same thing happened "Unable to Communicate with Printer (Network)" and I've been replaying Groundhog's Day ever since.
Please help!

Hello msheehy-
I would like to help you with this issue. It sounds like the router is changing the ip address of the printer. This could be caused by a couple reasons. (ip lease time, power loss to the router) I would recommend looking at the following link. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03781399&cc=us&dlc=en&lc=en&product=4323648&tmp...
I think if you would set a static ip address in the printer EWS you would better off. I hope this helps.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Similar Messages

Unable to Communicate with Printer Error - Officejet Pro 8600

My printer was working fine last week... printing from my Mac desktop via wireless.
Now, when I try to print, the progress window is just hanging... trying to find the printer.
I deleted the printer in my settings and tried to reinstall. Now, I am getting an error message that says: Unable to Communicate with the Printer at this Time.
Help, please!
Comuputer: Mac OSX Version 10.9.3
Printer: Officejet Pro 8600 Plus... only about 3 months old!

Hello K_D123, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having wireless issues. I would like to try and help.
I would recommend powering off your computer and printer. Once they are both off, I would unplug the power from the back of your wireless router, wait 60 seconds and plug it back in. After the router has begun broadcasting, power on the printer and computer.
I would also recommend following the steps in this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

INTERNET NOT WORKING WITH PRINTER HP OFFICEJET PRO 8600

Hi,i have new printer HP OFFICEJET PRO 8600.if i connect printer to PC internet stops to work.I have mobilstick internet.Its working without printer.IF the printer is connected and i put mobilstick to PC its writeing the device cannot be recognized.The internet is working with old printer.
I have windows XP.thank you

It does sound like there is a compatibility problem. You might try posting on one of the computer boards to see if anyone has advice on a computer setting that might help solve the compatibility problem. Click Here
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

HP Officejet Pro 8100 unable to communicate with printer, but still prints

Hello,
I have an Officejet Pro 8100 connected to a Windows XP SP3 computer via USB.
When installing I downloaded the latest drivers off the HP webiste and followed the instructions for installing the printer and connecting via USB. While installing I only installed the basic print driver.
The printer appeared to install correctly.
When printing (test page, or from other programs such as Word or Excell), the printer will actually print the requested document, however, an error box will pop up saying "Unable to communicate with printer". The only option on the error box is the cancel the current print job.
Before cancelling the print job, even though the printer actually printed the document, I can still see the document in the print queue until I click the "Cancel" button on the error box.
I have deleted the printer, uninstalled and reinstalled twice, but the issue persists.
Any ideas?

Hi aconway,
I hate to hear you are having issues. This could be caused by a port issue, bad USB cable/hub/switch connection, or possibly a spooler or driver issue. Click Here to run the print and scan doctor (select OS, then click the + sign beside utility diagnostic tools, click the download button next to print and scan doctor). If you would like to learn more about your product, Click Here.
Suggestions:
1. Run the print and scan doctor to identify any port issues
2. Connect unit directly to PC with new USB cable that meets specifications(no longer than 4-6ft).
3. Remove any hubs or switches if being used.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

HP Officejet Pro 8600: "Unable to Communicate with Printer" error message

I receive the error message "Unable to Communicate with Printer" regularly when I print. Sometimes it will print 3 or 4 times just fine before I get this message. Sometimes it happens my first try at printing. I then have to reboot my computer to get it to work again. My OS is Windows 7 and my printer is an HP Officejet Pro 8600. My printer is wired to my computer. I have tried re-installing the printer software but this did not help. I've had this printer for only four months. Started happening after the second month. Any suggestions?

I finally solved it. Reflecting back on previous message boards I decided to try one last time. Some posters have found the problem in the Antivirus, Firewall protections. (By the way, I had even upgraded my router with no luck).I have Norton AntiVirus provided by the cable company.1. I turned off everything in the firewall. Although this left me vulnerable for a few mintues, I needed a fast test.2. It worked! I was able to print something immediately.3. I went back into the firewall, turned everything back on but turned off an individual switch within the firewall that said to "share the printer. "4. After turning it off, I was able to print and still have the most important parts of the firewall.This ultimately met my needs.Perhaps HP could:1. Do a better job at beta testing prior to release, including various brands of firewalls. Is there even a beta test process?2. Provide a better description of the error since all indicators within the drivers say the printer is connected. There should be a message indicating that it's connected but unable to print due to firewall protections.

Unable to Communicate with Printer. HP Officejet Pro 8600 N911g

Unable to Communicate with Printer. HP Officejet Pro 8600 N911g {Removed for privacy}
I cant even connect to the printer on IE, Firefox I get in just fine.
I have it set to only warn of ink when printing so what fix won't work
I noted my Firmware
I am on Win 7 64 bit

Are you receiving any error messages when you print from the desktop? Its possible the print spooler is having issues which is not pushing the jobs to the printer. Lets restart the print spooler to get any old jobs that could be stuck in the queue removed.
1. Press the start orb in the bottom left on the screen.
2. Click on "Run"
3. Type "services.msc" (without the quotes)
4. Locate the Print Spooler service in the right column
5. Click restart on the service link on the left
After it restarts the spooler go ahead and retry printing. Let me know if this works.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Unable to Communicate with Printer-OfficeJet Pro 8500 A910g

I have used this printer for two years. I suddenly started getting the "unable to communicate with printer" message. I have turned printer on and off, turned wireless on and off, turned computer on and off and uninstalled and reinstalled the printer. It keeps happening. The printer window shows that it is offline, but there is no option to make it online. I used the IP address the printer shows when I set it up. I am at my wit's end. Help!

Please provide the following relevant information so someone can help including:
Detailed Problem Description - Done
Printer Model - Done
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router -
Error messages - on printer screen and/or computer, any blinking light patterns.
Status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Officejet 6700 "unable to communicate with printer".

Before I left on vacation, the wireless printer was working fine. Now I get this error message. I have disconnected and reconnected everything. I have run the diagnostic tests and the wireless network checks out fine. I have tried everything in the troubleshooting guide to no avail. I think it's probably a setting somewhere, but I can't figure out where. Help!!!!

I have the same problem with an HP OfficeJet 8600 Plus.
It worked last week, this week it gives "Unable to communicate with printer" on both of our PCs (XP, Vista).
I have tried all of these:
Rebooting router
Rebooting printer (5 times)
Rerunning the wireless setup wizard on the printer (3 times).
Start menu > HP OfficeJet Pro 8600 > Update IP Address (3 times)
Download & run latest HP Print and Scan Doctor (connected via USB cable) (once)
On the print & scan doctor, it gave no errors or warnings, and appears to have completed successfully. Nonetheless when I clicked on 'print test page' from within the HP Print and Scan doctor, I still get the "Unable to Communicate with Printer" popup box.
On the 'HP Hardware DIagnostic Utility 3.1 "Wizard" tab, Connectivity and Device Status bogh gave green checks, and, the 'Print Test' WAS SUCCESSFUL in printing a page from within that utility. Hardware DIagnostic Utility 3.1 completed with all tests marked successful. All other printing still fails, e.g. regular printing and Windows 'Print Test Page' still fails with the Unable to Communicate with Printer error.
The HP Hardware Diagnostic Utility 3.1 'Printer Data' tab says I am running Firmware Version CLP1CN1232AR, Born On Date 10/3/2012, Software Version 25.0.169.0, Printer Driver Version 06.64.00.994.
My printer is less than 1 year old -- has it died/shoud I start up the warranty process, or is there something yet to try?

HP Officejet 7500 E910 Network. When asked to print "Unable to Communicate with Printer"

My printer has been functioning well for some time. When my some installed a new wireless modum I would often receive the error message "Unable to Communicate with Printer" but it would blink a few times, then connect and print. As of three days ago I receive that message when trying to print from both of my laptops. I am wireless and have checked the wireless signal and it is strong, The wirless connect symbol is lit on the printer. I ran a wireless Network Test Report on the printer and the results indicated no problems.
The printer woks if I use it manually to print or scan. Neither printing nor scanning work when command is sent from my computer. The Wireless Network Test Report printed fine. Interesting though the Wireless Network test Report had the following date: Jan-00-00 00:00AM.

Hello @Dalead,
Welcome to the HP Forums!
I understand you're receiving a message stating "Unable to communicate" when printing a document using the Officejet 7500 E910. I will do my best to assist you! I would recommend following this entire HP document on Printer Does Not Maintain Wireless Connection.
Try assigning a static IP address and let me know if this resolves your issue or not. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

OfficeJet 6700 - "Unable to communicate with printer" message after install

I am on a hybrid network with Windows 7, 64-bit. Printer is hard-wired to the router (ethernet) but laptops are wireless. Installation doesn't allow for a hybrid option, just wireless or wired, so I installed as wired.
I just installed the OfficeJet 6700 - installed OK. I also updated software/firmware during the install process.
Windows' "Devices & Printers" recognizes the HP as being installed.
Printer is able to produce the network configuration page, etc. so we know the printer is functional, but when I try to print I get an "Unable to communicate with printer" message.
Windows' "Devices and Printers" troubleshooter thinks the driver is not installed, but as I mentioned, I just installed software from the CD.
UPDATE: I was able to install & print without problems on my wife's Win7, 64-bit laptop. Something about mine seems to be the issue. Also, HP Print & Scan Doctor reports that everything checks out OK, but when I try to print a test page at the end of the good doctor's diagnosis, I am still "unable to communicate with printer."

Sorry this is so long, but I tried to be through in my testing.
Followed your suggested steps.
I had previously set a static IP address, but just to be thorough, re-set it again with the same address.
I unplugged the USB cord from the laptop.
I began with the device labeled "HP OfficeJet 6700 (Copy 1)," which was set as the default printer.
After entering the IP address & clicking Next, it searched the network and returned this message:
Additional port information required
The device could not be identified.
The device is not found on the network. Be sure that:
1. The device is turned on.
The network is connected.
The device is properly configured.
The address on the previous page is correct. (re: the page where the IP address is entered)
If you are sure the address is correct, select the device type below.
I selected Standard (Generic Network Card) and clicked Next.
Summary dialog appeared and I clicked Finish.
Clicked OK/Apply.
Attempted to print. Like before, it sent the file to print queue - then nothing.
Right-clicked on the "Copy 1" device and selected Troubleshoot. Returned the message: Make printer "Fax HP OfficeJet 6700 the default printer" - even though this copy is already the default printer. (Usually when the original copy is set as the default, this copy is automatically re-named "Fax HP OfficeJet 6700.") I chose "Apply this fix."
Summary page said "Troubleshooting has completed." I closed the troubleshooter and attempted to print. I closed the Devices & Printers window so it could refresh. Re-opened Devices & Printers. Now the default printer is named "Fax HP OfficeJet 6700." The other device is grayed out and is simply named "HP OfficeJet 6700."
Attempted to print. (I'm testing w/ Notepad and .txt files)
I have 3 choices in the Notepad's printer dialog box but only 2 devices showing in the Devices & Printers window:
~ "Fax HP OfficeJet 6700" - This is the default printer in the Devices and Printers window. I clicked on Print & rec'd an error message: "Send Fax - HP Officejet 6700. There is a problem communicating with the Printer. Check your USB connection & verify that the printer is ready." Notepad's print dialog box shows status as Offline. I canceled all documents in the print queue.
~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is the printer that shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)." There is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. Notepad's print dialog box shows status as "Ready." In Devices & Printers, when I right-click on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing," 2 HP devices are listed - the one labeled "Copy 1" and the one labeled "Fax." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
I plugged in the USB cord again and re-ran the same series of tests.
~ "Fax HP OfficeJet 6700" - This is still the default printer in the Devices and Printers window. Notepad's print dialog box shows status as "Ready." The fax window opened, waiting me to enter the recipient's name, add a cover sheet, etc. I closed the fax window. The .txt file was in the print queue for the "Fax" device, so I canceled all documents in the print queue.
~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)." Again, there is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. This is one of 2 choices in the device labeled "Fax" - the default device. Notepad's print dialog box shows status as "Ready." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
Next, I used the printer's touch screen interface and turned the wireless connection off, leaving the USB cord plugged in.
~ "Fax HP OfficeJet 6700" - Status: Ready. The fax window opened, same as before. I closed the fax window & canceled all documents in the print queue.
~ "HP OfficeJet 6700 - Status: Paused - Offline. I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This one shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)" - Status: Error. I clicked Apply, then Print. Again, this is one of 2 choices in the device labeled "Fax" - the default device. Like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
Reconnected to the wireless network & verified that the IP address had not changed.
Tried again to print using "HP OfficeJet 6700 (Copy 1)" - Status: Ready. I clicked Print and again, it sent the file to print queue - then nothing. This is still listed as one of 2 choices in the device labeled "Fax" - the default device." Like before, I canceled all documents in the print queue.
Next, I right-clicked on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing" and selected the device labeled "HP OfficeJet 6700 (Copy 1)." In the print queue window, when I click on "Printer, one of my options is "Set as Default Printer." As soon as I did that, the device in the Devices & Printers window was renamed as "HP OfficeJet 6700 (Copy 1)" - no longer named "Fax." I tried to print again. Once again, file was sent to the print queue but never printed.

"Unable to Communicate with Printer"

I work at home, dialing into the office through VPN. Windows 7. Been using my HP printer flawlessly for 7 months, including up to yesterday, but today, I get the above error. The printer is connected, the wireless is working in my home for all other peripherals attached to it. My work help desk is talking gobblygook to me and can't help. It's something about an IP address. Can anyone help? Work firewall won't let me download the HR Scan Doctor.

Hey @GinaCh,
Welcome to the HP Support Forums!
I understand that you have been using your HP Officejet Pro 8620 e-All-in-One Printer through the wireless connection to your Windows 7 computer fine for months now. However, recently, when connecting to your VPN to print you are receiving the message 'unable to communicate with printer'. Unfortunately, this error message is the exact reason why your printer is not supported over the VPN connection when wirelessly connected.
When you network the printer it comes down to a numbers game. To explain this better I am going to use an example below. When you have a wireless printer on your network it is assigned an IP Address from your router that allows it to communicate with other devices on your wireless network, such as your computer. The first 3 sets of numbers in an IP Address are the same on every device connected to your network.
As an example,:
Printer IP: 192.168.1.8
Desktop Computer IP: 192.168.1.5
Laptop Computer IP: 192.168.1.3
As you can see, the first 3 sets of numbers are identical and the last digit is different on each device.
When you connect over a VPN your computer disconnects from its local connection (your home network that the printer is connected to) and connects to your business network. This VPN connection will change the numbers so your computer that is connected to the VPN will no longer have the first 3 sets the same as the printer.
As an example:
Printer IP: 192.168.1.8
Desktop Computer IP (On VPN): 10.1.10.19
Laptop Computer IP (Not on VPN): 192.168.1.3
If the Desktop computer 'thinks' it's on a different network when connected to the VPN than your wireless printer will be blocked from communication. The 100% way to resolve this issue would be to connect your HP Officejet to your computer through a USB Cable. If this is not an option than the next supported step would be to log into the VPN and open the document you need to print, then disconnect from the VPN and select file and print and everything should work fine.
Now there may be security settings or port settings that may have changed on the VPN which is why the printer is now being blocked from communicating over the network. To resolve this you would need the IT Department for your company to take a look into this issue for you.
I hope this helps clear up any confusion. Should you wish to connect your printer through a USB Cable connection I can certainly assist you with that. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Unable to communicate with printer via WiFi

Laptop is not recognizing printer, stating "unable to communicate with printer at this time. ! No Printer Selected".
There is only one printer and only one to select from.
All other laptops, iphones, etc communicate FINE!
It is just THIS puter unable to print. Printer is HP Photosmart C410 All-In-One Premium Fax.
Router, modem, etc all functioning properly. PRINTER functions properly.
This has gotten VERY old! Brand new MacBook Pro!
OS X 10.9.5

Are you receiving any error messages when you print from the desktop? Its possible the print spooler is having issues which is not pushing the jobs to the printer. Lets restart the print spooler to get any old jobs that could be stuck in the queue removed.
1. Press the start orb in the bottom left on the screen.
2. Click on "Run"
3. Type "services.msc" (without the quotes)
4. Locate the Print Spooler service in the right column
5. Click restart on the service link on the left
After it restarts the spooler go ahead and retry printing. Let me know if this works.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Unable to communicate with printer; ad hoc problem: Photosmart 6510

I'm running windows 7 pro and I recently installed the aforementioned printer. Please help. 'HP-setup-73 Photosmart 6510,' the name of the printer, is recognized and able to be connected to in my network wireless connections. Firewalls have been disabled and Installation and network config is already set - at least to my knowledge. But when trying to print something, an error window pops up saying: "Unable to communicate with printer...If you installed this printer by IP address, please update the IP address..." That error message could be irrelavant; Perhaps it's a setting adjustment on the printer side. I don't know, that's why I'm asking. what should I do to fix this problem?

Print a Wireless Network Test from the front of the printer (probably the Network or Wireless menu). Does it indicate that your printer is connected to your network?
If so, go to Start > All Programs > Hewlett-Packard > [your printer model] > Update IP address.
If you want a more permanent solution after doing this (so you will not have to do it again), set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to Communicate With Printer error

I have an HP Office Pro 8600 Plus that is connected wirelessly. After I start the computer, I can print fine for a day, but when I try to print the next day, I get the error message 'Unable to Communicate With Printer'. I am running Windows XP 32 bit on a Dell computer. I have changed the settings on the network card to not power down and the computer to not shut off the disks to try to fix the problem, but the problem is still here. If I reboot, I can print again.
I run Norton antivirus.
I have another HP printer connected by a network cable and that printer works fine. I have a Canon MG printer connected wirelessly that experiences the same issue of unable to communicate.
I can ping both wireless devices (192.168.1.74 and 192.168.1.73) even though I cannot print to them.
Thanks,
Andrew

Try setting the printer to a static IP like 192.168.1.10. Change your routers wireless channel to a fixed channel like 1,6 or 11 not auto. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP 5510,windows 7, new setup of printer, "unable to communicate with printer" when i try to print

HP 5510, Windows 7, new printer, just picked it up!, "unable to communicate with printer" when I try to print a page, all network conections check out OK with Print Diagnostic Utility.

Are you receiving any error messages when you print from the desktop? Its possible the print spooler is having issues which is not pushing the jobs to the printer. Lets restart the print spooler to get any old jobs that could be stuck in the queue removed.
1. Press the start orb in the bottom left on the screen.
2. Click on "Run"
3. Type "services.msc" (without the quotes)
4. Locate the Print Spooler service in the right column
5. Click restart on the service link on the left
After it restarts the spooler go ahead and retry printing. Let me know if this works.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Unable To Communicate With Printer HP Officejet Pro 8600 (Network)

Similar Messages

Maybe you are looking for