Unable to configure email in OATS administrator

Hi All,
I'm using latest version of oats,12.1.0.2.58.For configuring email settings in OATS administrator,I'd given my SMTP sever name and tested with valid email address.But the result is failed and an error screen pops out with a message "error while sending email".I just want to figure out the error.Where do i find the error log of this?Please help me on this.
Thanks in advance...
Regards,
Sandeep.

Hi Jamie,
Thanks for the reply.
It was a bug in the previous versions of OATS.This bug was fixed and I'd successfully tested it in OATS 12.1.0.2.0 build 58.The testing was done on a windows XP machine.But when i tried to test E-mail configuration on a Windows 2008 R2 server,test fails and the system gives "Error while sending mail".Is there any error logs that would help me find the cause of the error?Are there any OTM specific error logs?
Regards,
Sandeep.

Similar Messages

  • Unable to configure email in N8

    I got a new N8 a couple of days back. However, when I try to configure email over WiFi or GPRS/Edge, I get an error message saying - "Service Temporarily Unavailable. Try again later" I searched the forums and found that a few people with new C7s are also facing the same problems. Any suggestions?
    Present: Lumia-820
    Past: E6, L-800, N8, N900, 5800 XM, 6500 Slider, 6303c

    abjbhat wrote:
    That worked. Thanks! OT : Do you know if the N8 supports IMAP folders? I don't see my gmail folders here. I have a feeling MFE folders won't be available either.
    In email select:
    Settings > Google mail > Sync Content > Folder Subscriptions
    It will then get a list of folders from the server which so you can select which ones you want.
    N8-00 pc059C9F6 Belle
    808 PureView pc059P6W5

  • E72 : Unable to configure email post 071.004 firmw...

    My emails on e72 were working perfectly fine before this upgrade. but post upgrade, I was unable to recieve my emails. So I removed the accounts and tried to reconfigure them. But the configuration wizard doesn't get past the 'Detecting Email Settings'. This is really annoying and I have lost an import feature of the phone. Can someone help me out?
    thanks,
    Arun

    I did same firmware upgrade. It killed the Nokia email software for using yahoo email.  I was able to get Yahoo email working with IMAP settings BUT it is so bad it is hardly worth it.
    On my main phone screen I have two email notifications
    1) Mail for Exchange
    2) Yahoo account
    I see the Yahoo account count down to zero(number of unread messages) and then back up to a number. It is like it kills all the messages int he back ground and then re-downloads them.  While this is going on the phone, it is so "CPU" bound that I cant use anything on the phone. If I am on a phone call , sometimes the phone goes so CPU bound, it wil drop the call!
    Nokia has really done something with this latest firmware upgrade first by killing yahoo email and then by the email takes so much CPU, the phone is un-useable.
    Another issue I have seen with the upgrade is
    1) I get exchange server busy messages. In 12 months prior, I never saw this! I get over 500 pieces of email a day and NEVER have I see this until the firmware upgrade
    2) On a SEND from mail fro Exchange, I also get an error message that the server is busy and it dumps the message into Drafts box. also new since upgrade
    3) I now get out of Memory errors when simply going into the calendar or other things.
    All I have or use on this phone besides making calls is the Mail for Exchange, Yahoo email, google maps, contact list, calendar, some text meessages and the Nokia bult-in GPS. 
    This phone all worked fine until this firmware upgrade which I had to do as before the upgrade my mail also stopped working so Nokia customer support told me I had to do the upgrade
    Thank You Nokia for making my phone worth about $1.00 in a flea market... time to buy an iPhone or a blackberry. This WAS the best phone on the market for a non touchscreen, but Nokia has killed the phone... At times I cant even make a phone call as I have to shut the phone off and re-start it,.
    Yes NOKIA, thank you for making my E72 simply just a phone from all the wonderful things it used to do. Oh yes, I find I have to reboot the phone at least every other day. Priot to your upgrade, the only time I ever turned the phone off was on a plane.  If I dont re-boot, I get Memory errors and the phone is so slow is is also un-useable!

  • Need to configure email alerts for app/web server shutdown

    Hi,
    I need to configure email alert notification, so that whenever application server or webserver is shutdown/restarted, an email is sent to the group/userid.
    I am aware that in Peoplesoft, there is no parameter or functionality which sends an email notification whenever application server & web server restart & shutdown. This is where I need help.
    Did anyone setup the email alert notification in any of your environments? If so, please let me know how did you do the setup?
    Thanks,
    Sakky

    Please find the below sample batch program.
    this helps to start the appserver automatically and if the status fails this will send email automatically.
    This is the another way of findting the status of the app server.
    In the below program, by finding the "Done" value on the output screen we can decide if the server is running or not.
    Hope you understand this, Kindly let me know if you need further information.
    ===============================
    @echo off
    REM Set a temporary variable
    SET CONNECT
    REM Check the status of the Application server
    psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
    REM If the server is down boot the server
    ERRORLEVEL 1 SET CONNECT= psadmin -c boot -d PSEPM
    %CONNECT%
    REM Check the server again for status
    psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
    IF ERRORLEVEL 1 goto sendmail
    goto end
    REM Sending mail to Administrator
    :sendmail
    REM setting the path for email command
    SET CONNECT= cd D:\PT849\bin\client\winx86
    %CONNECT%
    REM Below command will send mail to the Administrator
    SET CONNECT= psemail -server < server ip> -from [email protected] -to [email protected] -subject "Server Down" -body "Hi, Server is down at this time, unable to boot."
    %CONNECT%
    :end
    ==============================
    Edited by: Soundappan on Feb 19, 2011 10:39 AM
    Edited by: Soundappan on Feb 19, 2011 10:40 AM

  • Unable to configure Outlook with ASA firewall and IWSVA

    Dear Sir,
    We are unable to configure MS outlook in our network  which is having IWSVA proxy and cisco ASA 5510 firewall.
    snapshot of outlook error details are attached for your reference.
    In our network L3 is behind IWSVA which is behind cisco ASA 5510.
    when we change following NAt rule and ACL incoming rule it works fine
    nat (inside,outside) source static any interface unidirectional
    nat (inside,outside) source static obj_Proxy interface unidirectional
    access-list 100 extended permit ip any any
    access-list inside_access_in extended permit ip object-group Proxy_Server any
    all required ports are allowed in IWSVA also please tell me if we have to make any changes in IWSVA like mapping ports etc.
    Thanks in advance
    Regards:
    Anand Singh Dhouni

    Hello Anand,
    I already replied to you on the other post, Please mark this as answered so we can focus on one ticket and avoid duplicates.
    For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
    Any question contact me at [email protected]
    Cheers,
    Julio Carvajal Segura

  • Unable to send email from iPhone or ipad, Unable to send email from iPhone or ipad

    Recently, I have become unable to send emails from my comcast email account.  I tried uninstalling and reinstalling the account, but get an error (Cannot send. Username or password for Comcast invalid).  The username and password are correct, though, as my email works fine on my non-Mac laptop. Any suggestions?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • Unable to send email from content server

    Hi,
    I have a requirement of sending the notification email to user from the stellent when he subscribe to it.To test it i logged in to content server as sysadmin.
    Administration->Actions->Send test email.
    I had filled some dummy data and when i click on send it gives me a error
    Content Server Request Failed
    Unable to send email. Could not send mail message from [email protected] with subject line: Test email from Content Server.
    intradoc.common.ServiceException: !csMailCouldNotSend,[email protected],Test email from Content Server
         at intradoc.server.InternetFunctions.sendMailToEx(Unknown Source)
         at intradoc.server.SystemAuditHandler.sendEmail(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at intradoc.common.IdcMethodHolder.invokeMethod(Unknown Source)
         at intradoc.common.ClassHelperUtils.executeMethodReportStatus(Unknown Source)
         at intradoc.server.ServiceHandler.executeAction(Unknown Source)
         at intradoc.server.Service.doCodeEx(Unknown Source)
         at intradoc.server.Service.doCode(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doAction(Unknown Source)
         at intradoc.server.Service.doAction(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doActions(Unknown Source)
         at intradoc.server.Service.doActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.executeActions(Unknown Source)
         at intradoc.server.Service.executeActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doRequest(Unknown Source)
         at intradoc.server.Service.doRequest(Unknown Source)
         at intradoc.server.ServiceManager.processCommand(Unknown Source)
         at intradoc.server.IdcServerThread.run(Unknown Source)
    Caused by: intradoc.common.ServiceException:
         at intradoc.common.SmtpClient.sendMail(Unknown Source)
         at intradoc.server.InternetFunctions.sendMail(Unknown Source)
         ... 21 more
    Caused by: java.lang.Exception: !csSMTPInvalidMessage,"System Administrator" <[email protected]>!csSMTPUnableToFindRecipients,1
         at intradoc.common.SmtpClient.writeMultiMsg(Unknown Source)
         ... 23 more
    Caused by: java.lang.Exception: !csSMTPResponseIndicatesFailure,550 5.7.1 Unable to relay for [email protected]
         at intradoc.common.SmtpClient.writeMsg(Unknown Source)
         ... 24 more
    I had set the internet configration in admin server to this values..
    HttpServerAddress=blrdxp-rchithul.corp.capgemini.com
    MailServer=BLREX002.corp.capgemini.com
    [email protected]
    SmtpPort=25
    HttpRelativeWebRoot=/idc/
    CgiFileName=idcplg
    UseSSL=No
    WebProxyAdminServer=true
    But i am still getting the error.kindly help me...
    Thanks in Advance
    Regards
    Rakesh

    Hi Rakesh,
    You have to request you Network team to add the ip address of the machine where you have installed content server to your Exchange Server.
    Let me know if it works.
    Deepak

  • Unable to configure reporting services on Web(sharepoint) server where DB(SQL )server is insatlled on another machine.

    Hi Team,
    We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
    done on any of your environments and can you please suggest us the workround/resolution.
    Regards,
    Sobha Muyida

    Hi ,
    Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
    while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
    ===== Initiating OLAP database build process =====
    [6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
    ===== Verifying and running pre-build server event handler =====
    [6/10/2014 12:04 PM] Verifying and running pre-build server event handler
    ===== Determining database and OLAP database structure =====
    [6/10/2014 12:04 PM] Cube build initialization started
    [6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
    ===== Building database and cubes =====
    [6/10/2014 12:04 PM] Cube build session started
    ===== Process Completed =====
    [6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
    Regards,
    Sobha

  • Adobe plugin for Outlook in 2013 unable to configure to load at startup

    Windows 7 Pro, Office 2013 Home and Business
    I don't see a registry key for the plugin, there's no properties in Outlook for the plugin
    Manually loads properly and functions properly, however unable to configure it to load when Outlook starts.
    Any ideas?

    Hi jeremyh77032804,
    Please open Outlook and go to 'Tools > Options > Add-Ins' and select 'COM Add-ins' option under Manage label and click Go.
    From the new dialog box that appears, select Acrobat PDFMaker Office COM Addin and click OK.
    Also, please confirm the location of PDFMaker add-in is under "C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\Mail\Outlook"
    Do you have the administrative privileges to this location specified above?
    Please let me know.
    Regards,
    Anubha

  • Configuring Email and Notifications in SCSM 2012 R2

    Hi all,
    There appears to be three places to configure email in Service Manager 2012:
    - Administration > Settings > Incident Settings > Incoming email
    - Administration > Notifications > Channels > Email notification
    - Administration > Connectors > Exchange Connector
    Could someone provide a quick rundown on what each of these pieces is designed to do, and why they are separated? Perhaps some are even legacy, or shouldn't really be used at all.
    Any insights are much appreciated.
    Thanks,
    Joe.

    Yes this is by design, You can't provides access rights on field levels in SCSM. You may use:
    1. read-Only Operator: Read-Only Operators have read-only access to work items in their queue scope and to configuration items that are in their group scope.
    2. Incident-Resolvers: Incident Resolvers can edit and create incidents, problems, and manual activities that are in their queue scope. Incident Resolvers also have read-only access to other work items such as change requests that are in their queue scope
    and to configuration items that are in their group scope.
    3. Advanced-Operators: Advanced Operators can create or edit any work items that are in their queue scope and any configuration items that are in their group scope. They can also create, edit, and delete the announcements that are displayed on the Service
    Manager Self-Service portal.
    Any custom Role will inherit the permission basics from the built-in roles.
    Regards
    Antoine AL Ibry

  • Error when opening configuration manager in the administration workstation

    Hello,
    For some reason I get this error everytime I try to  open the configuration manager on the administration workstation. The error says "(-9934) Unable to initialize the real-time feed for instance cdi. Unable to proceed until the real-time can be established.  The feed may be inactive or you may
    not have permission to connect to the feed."
    Does anyone have any suggestions why I get this error?
    Thank You.

    Once you login to the AW you should see all the aw processes in the task bar.You would even see this error if you simply do not use the /console option to login when using mstc.
    I did not even consider that someone did not have the Distributor running - you are right.
    But you have to adjust your thinking - "you should see all the aw processes in the task bar" - will not cut it with Windows 2008.
    With 8.0 and onwards, perhaps you should consider mentioning the Portico.
    Rgards,
    Geoff

  • Unable to configure the router.

    I bought a router today and I'm having some trouble getting it working. Iinserted the CD and followed the on-screen installation settings including unplugging the modem/router, then plugging it back in, etc. I got to step 11 "Set the Router's Administrative Password" before I had problems. I went to set the password, but I got the message "Unable to configure router. Reset thr router to factory default settings by pressing the reset botton for 5 seconds." I reset the router, but still got the error. Using a quick search I found a similar problem and following the steps on there, pinged 192.168.1.1 with 4 replies. I connected to192.168.1.1 through my browser just fine as well, but I still can't get past step 11. 

    Have you configured hyour wireless settings on the router and your computer?  This has to be done.
    For cable go here
    Wireless go here.

  • Configuring email alerts in Ops Center

    Hi all,
    I have been struggling quite a while to get email alerts working from Ops Center with no success in 11g nor 12c. In the Ops Center GUI, Administration -> EC -> Local Users -> configured user to receive all alerts and emails. I have also configured email relay host correctly(checked a million times).
    Sending emails from the host through the email relay works fine, so I'm baffled.
    #mailx -s " Test from Ops Center" "[email protected]" < text-file
    Do I need to configure something else in Ops Center or what am I missing here?

    The email alerts from Ops Center are working for me, I performed...
    1.) You must be able to send email from the command line on the Enterprise Controller to the intended email address, ie;
    # mailx -v [email protected]
    Subject: Email test from Enterprise Controller
    EOT
    <control-d>
    That test must be successful, and the email received!
    2.) Setup the Notification Profile in the BUI...
    Administration > Enterprise Controller > Users
    Highlight the root user, select Configure Notification Profile (the wrench icon)
    Notifications via >> Subscribe to All Notifications
    User Interface > "Problem updates and all Severities"
    Email: > "Problem updates and all Severities"
    Pager: None
    Notifications Delivery Details
    Email: [email protected]
    Pager Address: <blank>
    Mail Host: localhost
    Port: <blank>
    Mail User: root
    Mail Password: <enter the password for root on the EC>
    Connection Security: STARTTLS
    Select: Update Notification Profile
    3.) Go to Assets > Operating System (second level down) of some Asset
    In the center pane select the "Monitoring" tab
    Under "Threshold Monitoring Rules" highlight "Memory Usage Percentage"
    Edit Alert Monitoring Rule Parameters (the pencil)
    Monitor for alert limits continuously
    Toggle: Generate Alert after 1 Minute
    Change Critical MemoryUsage.usedMemoryPercentage > 2%
    Change Warning MemoryUsage.usedMemoryPercentage > 1%
    Apply
    Wait one minute, you should receive an email that resembles the following:
    Notification is generated by (90037): myserver
    ORACLE Enterprise Manager 11g Ops Center Reported Problem
    GlobalZone: myserver
    Problem ID: 425Detection Date: 02/24/2011 05:23:36 GMTSeverity:CriticalState:UnassignedOwner:-Assigned Date: -Problem Description:Memory Usage Percentage has reached 59.4122 on myserverOps Center Server: myserverProblem Link: Click on to be redirected to the reported problem
    https://myserverx:9443/emoc/?objectName=com.xxx.hss.domain%3Aname%3DNORM-myserver-XVM_SATELLITE%2Ctype%3DOperatingSystem&treeId=asset-tree&handler=alarms&alarmId=425Suggested Actions NumberSynopsisAssociated Operational Plan-None

  • Configuration guide for Personnel Administration Required

    Can anyone send me the Configuration guide for Personnel Administration....Thanks in advance

    you can go through this link for the configuration of PA.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/48/35d4ad4abf11d18a0f0000e816ae6e/frameset.htm
    this should be helpful for you
    if you need still more pdf documents send me your personnel email id, i can send it to you.
    sam

  • NWDI: Unable to instantiate a Build Space administrator

    Guys,
    In CBS I see that there are a number of requests are permanently on the status PROCESSING. I've restarted the NWDI server, but this did not solve the issue. The most disturbing error message in the Default Trace is the following:
    Unable to instantiate a Build Space administrator!
    Build Space "JP6_SPPOSTPD_D" [bsID: 132, version: 0] [in-queue: on, out-queue: "on (queuing)", processing: on]
    Failed to initialize Development Configuration for the buildspaceJP6_SPPOSTPD_D
         Original Cause: null
    [EXCEPTION]
    com.sap.tc.cbs.server.dao.PersistencyLayerException: Failed to initialize Development Configuration for the buildspaceJP6_SPPOSTPD_D
         Original Cause: null
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.getDevConfig(BSAdmin.java:491)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.getTcsUrl(BSAdmin.java:503)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.onActivated(BSAdminOrc.java:281)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.validate(BSAdmin.java:186)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.updateState(BSAdmin.java:250)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.determineChanges(BSAdminOrc.java:444)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.validateBuildSpaceData(BSAdminOrc.java:229)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.act(BSAdminOrc.java:348)
         at com.sap.tc.cbs.server.rt.impl.CourteousTimer.run(CourteousTimer.java:118)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.lang.NullPointerException
         at com.sap.tc.cbs.server.dao.impl.BS.getConfigFile(BS.java:172)
         at com.sap.tc.cbs.server.dao.impl.BS.getBSConfig(BS.java:207)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.getDevConfig(BSAdmin.java:486)
         ... 9 more
    Caused by:
    java.lang.NullPointerException
         at com.sap.tc.cbs.server.dao.impl.BS.getConfigFile(BS.java:172)
         at com.sap.tc.cbs.server.dao.impl.BS.getBSConfig(BS.java:207)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.getDevConfig(BSAdmin.java:486)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.getTcsUrl(BSAdmin.java:503)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.onActivated(BSAdminOrc.java:281)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.validate(BSAdmin.java:186)
         at com.sap.tc.cbs.server.rt.bs.BSAdmin.updateState(BSAdmin.java:250)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.determineChanges(BSAdminOrc.java:444)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.validateBuildSpaceData(BSAdminOrc.java:229)
         at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.act(BSAdminOrc.java:348)
         at com.sap.tc.cbs.server.rt.impl.CourteousTimer.run(CourteousTimer.java:118)
         at java.lang.Thread.run(Thread.java:534)
    We are using an -Oracle- database.

    The oracle database in the secondary cluster had run out of diskspace.

Maybe you are looking for


HashFlare