Unable to connect even after changing settings as advised

I recently talked my mother into buying an Apple and used iChat A/V as the primary excuse. However, we are unable to connect on iChat (through AIM), like many others I have read about in this forum.
I am using a Motorola DSL modem, style MSTATEA and a Belkin Wireless G router.
I have changed my Quicktime Settings to 1.5, my AIM Proxy to 443, and my bandwith to 500 as suggested. Here is the log:
iChat Connection Log:
2009-05-05 19:55:57 -0400: AVChat started with ID 3925203817.
2009-05-05 19:55:57 -0400: 0x1a622120: State change from AVChatNoState to AVChatStateWaiting.
2009-05-05 19:55:57 -0400: premaniacal4: State change from AVChatNoState to AVChatStateInvited.
2009-05-05 19:56:00 -0400: 0x1a622120: State change from AVChatStateWaiting to AVChatStateConnecting.
2009-05-05 19:56:00 -0400: premaniacal4: State change from AVChatStateInvited to AVChatStateConnecting.
2009-05-05 19:56:11 -0400: 0x1a622120: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: 0x1a622120: Error -8 (Did not receive a response from 0x1a622120.)
2009-05-05 19:56:11 -0400: premaniacal4: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: premaniacal4: Error -8 (Did not receive a response from 0x1a622120.)
Video Conference Error Report:
Video Conference Support Report:
0.310369 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
173.018088 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 2 returns 1
783.115517 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
783.254048 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
840.894462 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 4 returns 1
867.823022 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 5 returns 1
1935.147674 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 6 returns 1
1935.297776 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
Thanks in advance!

Ok,
If it is this particular Motorola then it routes
http://portforward.com/english/routers/port_forwarding/Motorola/2210-02-1006/iCh at.htm
The link is a page on a site about setting up Port Forwarding.
The Main purpose for you though is the default access info so you can get to the Set Up pages.
Now as set up pages are never the same and can even vary from the same manufacturer it is worth checking all the tabs at the top and all the buttons on the right of this one and any links in the main section to see if it has UPnP
UPnP (Universal Pug and Play) is an Enable/Disable option of allowing the apps on a computer to control which ports are open. (They close after a period of NON use)
In the firewall section you may find the device's own firewall has 4 levels.
This should be at Low of Off for iChat.
If you can find UPnP enable that and Save Settings for any changes you make.
The same site's front index page list many more Belkins than Motorolas.
Which model specifically do you have ?
Having two devices that route causes it's own problems for iChat.
Like you say you have done for the Mac you should set the Modem to allow Static Routing (Called Manually on the Mac) to the Belkin.
This means finding out the Modem's IP (in the first link), the Subnet Mask it uses and the DNS Servers from the ISP.
This info needs to be copied in the corresponding boxes that the Belkin has for the Mac's Network Preferences and tabs after you change it from Getting an IP Automatically or similar phrase.
Summary,
Confirm Belkin Model.
Set up Belkin and Motorola/Netopia to be Static Routing
Open ports in both to allow iChat (using UPnP where possible)
4:47 PM Friday; May 8, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

  • My i5 will not connect to any wifi's. Its says unable to connect even after I forget wifi's

    I can not connect to any wifi's.

    Restart your WiFi router by removing power to it for 30 seconds.

  • 30EA1--Database Diff not working even after changing Tools Preferences

    Trying to use Database Diff but even after changing Tools > Preferences > Database > Licensing, I still get the error message saying I have to make changes to the Licensing check box. Anyone have a workaround or experience the same problem?

    When you connect to any database error disappears, but still it's a bug.

  • I can't get internet connection even after wi-fi set is done with cisco

    I can't get internet connection even after wi-fi set up is done with cisco

    Not sure what Cisco is but if you are having problems with your wifi this link might help
    On the iPad...  tap Settings / General / Reset / Reset NetworkSettings.
    Or here is a link that might help http://support.apple.com/kb/TS1398

  • HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

    My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

    I would be worried about that - but it may turn out to be nothing.
    Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
    I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
    I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you  try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

  • I have vertical lines when printing even after changing cartridges.

    I have vertical lines when printing even after changing cartridges. There are no lines when copying, faxing or scanning, only printing. I have cleaned the glass, scanner and even dusted where the toner cartride slides in.  Any suggestions?

    Sorry but I have worked on laser printers for over 20 years and never encountered your issue.  That is of course if you are explaining it correctly.  When you make a copy to be printed or print a reports page from the printer or send a print job to the printer, if in all these cases you get the line, then yes the issue is either the toner cartridge or the fuser.  If you make a copy to be printed and it prints without the line (Put original in adf, press copy button and print should come out), then you have one weird unit since it does not make sense since the print formatter on the unit whether making a copy or printing from the computer or unit itself uses the same hardware.  Now to test if the printed copy has a line then just put a sheet of paper on top of the feed tray and do a self test from the printer.  When the back edge of the paper enters the printer, quickly open the toner door to stop the printing.  Remove the toner cartridge and look at the image below.  If the defect is present the toner cartridge is the issue and if the image below does not have the defect, then the fuser needs to be replaced.  Best I can do.  Good Luck.

  • Cwallet.sso failed even after changes made to cwallet security properties

    WARNING: Opening of wallet based credential store failed. Reason java.io.IOExcep
    tion: F:\oracle\middleware\user_projects\domains\obiee_domain\config\fmwconfig\b
    ootstrap\cwallet.sso (Access is denied)
    Oct 19, 2011 6:20:12 PM oracle.security.jps.internal.keystore.file.FileKeyStoreM
    anager openKeyStore
    WARNING: Opening of file based farm keystore failed.
    cwallet.sso failed even after changes made to cwallet security properties in bootstrap

    The user you logged in does not have permissions to access cwallet.sso file and hence, it says access denied. Try to check the permissions and add the user, who is trying to start weblogic server.
    -Vamsi

  • My remote wont turn the appletv on even after changing battery and unplugging everything and plugging it back in

    my remote wont turn my appletv on even after changing the battery

    Nothing, the light didn't flash at all? If so you either have a dead remote or a dead Apple TV.
    If you have a Mac you can try pairing the remote with it to test. Go to System Preferences->Security & Privacy and unlock the panel. Click the Advanced button and look for the Disable Remote Control Infrared   Receiver checkbox. Clear it and click the Pair button. If the remote is ok you should be able to pair it to the Mac.
    If you can't pair the remote it most likely pints to a bad remote. If the Apple TV still won;t respond then you need to get the Apple TV looked at.
    Good luck

  • My canon sx120IS continues to show low batter and shuts off even after changing the batteries.

    My canon sx120 is  continues to show low battery and shuts off even after changing the batteries.  Any suggestions? Do I need to send it for repair somewhere, and if so, where?

    Hi LB!
    Thank you for posting on our forum!
    Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth.  If the same warning still displays, then the camera will need to be serviced.  To start the repair process, you'll need to complete a Repair Request on our website.
    If the camera is more than a year old, you may participate in the Canon Loyalty Program instead.  The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  
    If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight.  Let them know you have been working with online support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My vi is writing just the same data into spreadsheet even after changing the loop iteration time. hw can I change this mode ?

    My VI is writing the same amount of data into spreadsheet file even after changing the for-loop iteration time

    You should post the VI (with appropriate values saved as default) to this thread.  (At least a JPEG or PNG screenshot).
    Inside the For Loop, right-click on the N terminal and create Indicator.  Run the VI and you will see how many times the Loop spins.
    Further guessing:  You may have a 2D array with two rows and many columns feeding the For Loop.

  • HT3176 my apple remote will not link to my appletv even after changing the battery

    my apple remote will not link to my appletv even after changing the battery.  can anyone help?

    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • WIFI unable to connect even if i input correct password

    I have just bought a Ipad and the WIFI unable to connect even if i input correct password, can someone share some light on the same.

    Hi,
    Troubleshooting help at this link for Wi Fi
    http://www.apple.com/support/ipad/wifi/
    Carolyn  

  • While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    Hi there aliyan,
    I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below. 
    If you see 'No SIM' alert on iPhone
    -Griff W.

  • When I try to access a web page or link from a web page I receive an error message like "Server not found" or "Unable to connect." After repeated "try again" attempts the page will load, but when I click on a button or link, the same thing repeats. Why?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

  • HT203075 im unable to sync music apps videos into iphone 6 whereas im able sync into my ipod touch 4G.When im trying to sync into my iphone 6 im getting a dialogue box asking me to authorize....Im unable to sync even after authorizing.

    im unable to sync music apps videos into iphone 6 whereas im able sync into my ipod touch 4G.When im trying to sync into my iphone 6 im getting a dialogue box asking me to authorize....Im unable to sync even after authorizing it.Dialogue box appears again and again...

    I read your entire message, and my mom's iPhone 5 does this exact same thing. When the idiot at the AT&T store transferred her data (well, most of it) to her new phone, he DID NOT use her latest iCloud backup like he should have, but used some features in "Bump" to move things across. So, in my opinion, it's not worth the hassle of restoring it as a new device as Tim suggests. That's just the easy answer. Here's something odd about hers. It seems to do this, when she's using her bluetooth earpiece (a Jawbone Icon), but not when she's got bluetooth disabled on the iPhone 5 and holding down the "Home" button to activate Siri. If she uses her Jawbone bluetooth earpiece to activate Siri, the answer that Siri presents on the phone's screen will only stay on for about five seconds, then dim, then go blank -- and she has to "swipe to unlock" and, of course, the Siri information is gone. Not so if she uses the Home key to activate Siri.

Maybe you are looking for