Unable to connect laptop using wireless Linksys router SES 36576

I have a Linksys wireless router (SES 36576) and a new HP laptop (Vista OS). Using my old laptop running XP, I was able to connect wirelessly. Linksys indicates that my signal is EXCELLENT; however, when I input the security key and it searches for the connection, it just flat-out will not connect. I don't know where to start because I've never had this problem before. Is my router compatible??
Thanks for your help.

Hi, the number you have for your router does not match any model number for a Linksys router.  Wireless routers from linksys normally have their model numbers start with WBR
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Similar Messages

  • Unablr to connect when using the Linksys router

    I'm using the WRT54Gx2, version 2 router and have configured it per the directions and with a computer directly connected and logged into the router it connects to SBCglobal just fine.  When I try to connect to the internet with the computer (not a wireless connection) it will not connect.  I'm using a new computer running vista - if that makes a difference.  I also tried connecting using another computer running xp and it will not connect.
    Any suggestions?

    If it's a speedstream or westell modem, you'll need to change the router's address. Do you need to click an SBC icon or enter a username/password to get online on the modem or is it automatic?
    The box said windows xp or better... So I installed Linux!

  • Unable to connect laptop to wireless network

    My MacBook Pro will not connect to my wireless network, but my iPad does so I know it must be a problem with my computer rather than the network. Any suggestions?
    I'm not sure if there is some obscure setting that I need to change.

    Give us more information, please.
    Is your wireless network supplied by your ISP, your landlord, your own router, or something else?
    What can you tell us about the settings on your wireless network? (Not the passwords.)
    Did this ever work, or is this the first time you have tried to connect the MBP to this wireless network?
    What model/year MBP is this? It has to be somewhat old if it is running Snow Leopard (10.6.8) as per your profile.

  • HELP I have a wireless Linksys router WRT54G connected th...

    HELP I have a wireless Linksys router WRT54G connected through my cable company broadband modem on a Mac. I have another computer to which I installed wireless capability because it didn't come with it. This required attching some piece of equipment to the back of the PC which enabled it to get on the internet without another cable modem. My question is this. If I get an iphone or a laptop(with built in wireless ability) will I automatically be able to go on the web because of the router on the Mac.

    yes certainly... if you get any wireless device in network that would certainly connects to a wireless n/w of router...

  • TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

    Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

    Have you tried a simple reset of your iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • Problem connecting to internet with linksys router after internet network password reset

    I do not know the model number of the wireless linksys router offhand, but it is one known to have a bug regarding connecting the internet. Others have solved the problem by buying another model number, but the person who owns it does not want to buy a new one since he does not know how to use any other one.
    What happened is our phone company (also the internet provider) was having technical problems so there no internet connection. Then, my computer opened with internet page to reset password to connect.
    Although I am able to get a connection on my wireless laptop, this other person in house is unable to connect to wired computer through linksys.

    Hi. WUSB300N is actually a wireless usb n adapter. A wireless receiver not a wireless access point or a router. You may want to check if you have a wireless Linksys or Cisco router there.

  • Trying to use Wireless-G Router w/ Mac OSx (WRT54G2)

    Hi,
    I just got a Linksys Wireless-G Router, to use with my Apple MacBook laptop. I got the laptop new back in January '08, and the router is new as of today. The Model Number is: WRT54G2.
    I have a Windows desktop PC that I have been using at home, it has a cable modem connection through my cable company (external modem).
    When I tried putting in the installation CD for the router today into my Mac, it didn't show up (the CD did, but the programs wouldn't start). I came to the Linksys website, and saw that the Wireless-G Router's CD only works on Windows (I have Windows XP on this desktop I'm using right now for Internet.) But, of course, the laptop that I want to use the wireless connection with, is a Mac.
    I don't currently use the Internet on my Mac at home (only at places like the library with free WiFi access).... so I don't currently have my Mac plugged into any kind of modem whatsoever right now.
    The help wizard on the website is so confusing. I am just wondering....how on earth can I possibly get my Mac laptop using the Linksys Wireless-G router system?? Where do I plug the blue ethernet cable into, etc.? I can't use the Installation CD on my Mac, so it says manual installation is required, but I dont know what to do.
    I would reallly appreciate anyone's help! THANK YOU SO MUCH!
    Message Edited by ktx428 on 08-10-2008 12:09 PM
    Message Edited by ktx428 on 08-10-2008 12:11 PM

     Access the setup page of the router by launching an
    Browser and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as "admin" (Without quotes)
    click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If not ... power cycle for 4-5 minutes & then again check the WAN Ip address .....

  • Hi, I have a wireless linksys router model WRT54G. what i...

    Hi, I have a wireless linksys router model WRT54G. what i want to do it´s configure a network in my home. I have 2 pc´s, a laptop an a desktop. what I should do to be able to share files,music,videos. between both computers? the laptop has Windows Vista, the desktop has Windows XP Professional. could you give me more details? step by step.   thank you really much.

    its really simple to set up a network, first make sure that all computers are in the same workgroup by right clicking on my computer, then properities, then computer name.
    there you can make the setting for the work group
    do not use the default one, create your own, do this for each computer.
    next thing is to choose any folder that you want to share and right click on it, select sharing, then check the two boxes to share this folder and the other one to allow others to make changes to this folder.
    doing this bypasses the trouble od setting up passwords for right now.
    you should not have the network up and running with folders being shared with all in that workgroup.
    you may want to check the manual for vesta as it may do things a bit differant that xp
    you could also run the create a network wizard in the xp system. 

  • I'm unable to connect to my wireless network

    I am unable to connect to my wireless network on my iphone 4.  It worked previously. My husband has no problem with his iphone connecting.

    Same here. Upgraded 2 separate iPhone 4 to iOS 5 and now both get an error that say "incorrect password" when trying to connect. iPad 1 upgraded to iOS5 and all 3 macs connect fine using same password. (Router is Apple Airport base station running 7.5.2)

  • Unable to connect to a Wireless Printer (Printer always Offline)

    Hi, please help me. I am desperate now, even though I feel very happy at first when I purchase my macbook air.
    My computer:
    1. 13.3" macbook air with latest OSX Lion installed.
    2. 12" Acer notebook with Windows 7 installed.
    My wireless router:
    1. Linksys WRT54G2 V1
    2. TP Link TP-MR3420
    My printer:
    HP Officejet 7500A Wide Format
    Initially, I am using my Linksys router to create my home network. I connect my printer to the router and everything works like a charm. I can print wirelessly without any effort at all from both of my mac and windows computer using the Linksys router.
    This works just fine until 2 weeks later, when I upgrade to a new TP Link router. I did the same process as my 1st router and the printer finally connected to the router. This time also, both mac and windows computer can print wirelessly without any problem.
    The next day, however, when I want to print using my macbook air, it couldn't detect my printer, saying that it is disconnected/ offline. I check the wireless connection status - both printer and macbook is connected to the same network. I try many suggestions from HP website such as:
    - Reset the printer network setting and reconnect my printer
    - Reset my printer setting in my macbook air and re-add it
    But still I cannot print using my macbook. Other windows computer can print with no problem at all.
    What really have happened?
    Please help.

    I have exactly the same problem.  The same printer (HP 7500A wide format) is working fine with a windows PC but not my macbook pro; despite doing everything HP recommends.  It seems almost certain to be an Apple issue, as it works fine on the old PC.  HELP!

  • Unable to connect to any wireless internet

    laptop not supported any dongal to connect internet where as device connected other laptop. If i connect with Hot s[pot then its connected so request you to help on this & suggest what should i do.  shoud i format ?

    Hello @James0007,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook computer is unable to connect to any wireless network. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Macbook air is unable to connect on hidden wireless network

    Dear users and support,
    I have just bought my macbook air with lion os already installed, but I am unable to connect to hidden wireless network. Is there any trick to fix it? even though I am typing the name and password it's unable to login.
    Please advice.
    tks,

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Reset the System Management Controller.

  • TS1398 Unable to connect to AT&T Uverse router

    I am unable to connect to AT&T UVerse router with an IPhone and IPod. 
    I have an IPad that is connected just fine. 
    On the IPhone & IPod I notice that in the Network Settings for WIFI these fields are not populated:  IP Address, Subnet Mask, Router.  The DNS & Search Domains are.
    All fields are populated on the IPad.
    How can I populate those fields myself.  Of is they supposed to be automatically populated through my wireless connection?  I asked AT&T but they could not help.

    These fields should be automatically populated if DHCP is selected.  Make sure DHCP is highlighted, if not tap that tab, then try to reconnect.  If you still can't connect, tap "Forget this Network", then try setting up the network connection again.
    If the above doesn't work try rebooting your router by turning it off for about 30 seconds (you may have to unplug the power cord), then powering it back on.

  • I started to have connectivity issues with a linksys router.  The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

    I started to have connectivity issues with a linksys router.  The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

    Hi RonWM,
    Thanks for visiting Apple Support Communities.
    This article lists the ports that are used by the Apple TV:
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Best Regards,
    Jeremy

  • Unable to connect facebook using HTTP_CONNECTOR in Integrator. Can anybody help for connecting Facebook with Integrator.??

    Hi,
    I am unable to connect facebook using HTTP_CONNECTOR component i have added all the parameters required for its authentication i.e client_id , client_secret, grant_type correct but the graph is giving the following error:
    ====================================================================================================================
    ERROR [WatchDog_0] - Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
    peer not authenticated
    ERROR [WatchDog_0] - Error details:
    org.jetel.exception.JetelRuntimeException: Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
      at org.jetel.graph.Node.createNodeException(Node.java:535)
      at org.jetel.graph.Node.run(Node.java:514)
      at java.lang.Thread.run(Thread.java:722)
    Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
      at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397)
      at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)
      at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:572)
      at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
      at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:151)
      at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:125)
      at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:641)
      at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:480)
      at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
      at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
      at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:784)
      at org.jetel.component.HttpConnector.buildAndSendRequest(HttpConnector.java:1836)
      at org.jetel.component.HttpConnector.process(HttpConnector.java:1803)
      at org.jetel.component.HttpConnector.executeForRecord(HttpConnector.java:1947)
      at org.jetel.component.HttpConnector.execute(HttpConnector.java:1914)
      at org.jetel.graph.Node.run(Node.java:485)
      ... 1 more
    ============================================================================================================
    Can anybody help with this ??

    Hi Brett,
    I have installed endeca in non-ssl mode. I am trying to validate the HTTP_Connector component as shown below and its showing the following error:  
    and if run the graph its showing error as mention above. I am new to endeca so can you please help me that what can i do for validating this component and connecting to facebook.

Maybe you are looking for