Unable to Connect to Backup Volume After Upgrade to 10.5.4

After I have upgraded to 10.5.4, I could not connect to Time Machine. It seems to be stuck forever "Connecting to backup volume ..."
I could connect to the Time Capsule storage.
In the console, I have the following:
7/12/08 8:05:08 PM /System/Library/CoreServices/NetAuthAgent.app/Contents/Resources/NetAuthSysAgen t[410] Warning: accessing obsolete X509Anchors.
7/12/08 8:05:08 PM kernel AFP_VFS afpfs_mount: /Volumes/TCH Time Capsule - 1-1, pid 410
7/12/08 8:05:08 PM [0x0-0xb00b].com.apple.finder[156] Unexpected reply from backup server - ignored
Anyone facing similar problem?

After I upgraded to 10.5.4, the complete microsoft office suite will not start. I never got to the Time Machine problems because I use the spreadsheets daily. I had to re-install the original software, 10.4, and step back up to 10.5.0 from my disks in order to get Xcel operating. Now I am stuck in 10.5 because the Software update Combined takes me right back to the problem with 10.5.4, no option to stop at 10.5.3 where everthing was working. Support I paid for offered no help except to re-install and go back to where it worked. Great, When will this get figured out? This process to get back to beig able to use this mac was painful.....

Similar Messages

My browser's are 'unable to connect' to some websites after upgrading to mavericks.

the message i get is:
Unable to connect
Firefox can't establish a connection to the server at www.adobe.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
this is happening on reliable sites such as www.adobe.com, however, there are other sites that also won't load such as (http://www.adobe.com/products/reader.html), and though it seems specific to adobe. i had a friend try going to the adobe site on a different machine running osx 10.6 and they could load the page fine. i tried firefox and safari and neither will load the page.
i'm running:
os x 10.9.2
processor- 3.06 GHz Intel Core 2 Duo
memory- 8 GB 1067 MHz DDR3
thanks,
rick

You, or someone using your computer, may have hacked the system to redirect queries to certain servers. The file modified is /etc/hosts.
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Back up all data.
If you have more than one user account, you must be logged in as an administrator.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
Below that, you'll see some other lines. There should be nothing above the first line "##". If you have any doubt about that, STOP and ask for guidance. Make sure you scroll all the way to the bottom. Scroll bars are hidden by default until you actually start scrolling, so you may not realize that you’re not seeing the whole document.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '11,$d' /etc/hosts
This time, you'll be prompted for your login password, which won't be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

I am unable to connect to my wifi after upgrading to ios 7 can anyone help?

hi all
can anyone help me find out how to connect to my wifi after i upgraded my fone to ios7,ive tried logging on to my account but still no connection??

If you have tryed every thing we have said and all of this
http://support.apple.com/kb/TS1559?viewlocale=en_US&locale=en_US
then it must be hardware, to make sure this is the case go to your local apple store and then let them see it at the bar there, they will say how much it will cost to fix or fix it if they can.
Hope this helps

Unable to connect to app store after upgrading to ios5.1??

Have tried everything restoring, resetting, formatting!!! Rest all network related apps like safari and fb are doing fine.Only the featured page is opening in app store.top 25 n search are not!! I can connect using mobile data connections but am unable to open anything through wifi... feel like kicking myself for upgrading to ios5.1.

Thx very much....but I could open the website and the itunes store....
After I tried typing following orders in Commonds, the problem solved:
rm ~/library/preferences/com.apple.appstore.plist
rm ~/library/preferences/com.apple.storeagent.plist
rm -rf ~/library/preferences/byhost/*
hope can hlep others

Not booting from 10.4.8 volumes after upgrade from 10.4.7

I'm sorry to report that my aged G4 450 MHz AGP with 4 internal Hard disk drives no longer boots from any of the 2 volumes upgraded to Mac OS X 10.4.8 as soon as it was started from another volume!
All was working fine as long as 10.4.7 was installed on the 2 232 GB disks connected to the SIIG ATA133 controller. I could boot from any OS on any of the 4 disks, 5 partitions:
internal ATA66 bus:
18 GB disk, 2 partitions: 'IBM_18GB' with OS 9.2.2 and TechTool Pro's 'eDrive' with 10.4.7
71 GB disk, 1 partition 'IBM_71GB' with OS 9.2.2
PCI SIIG ATA133 controller:
232 GB disk, one partition 'I1232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
232 GB disk, one partition 'I2232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
Now I can only boot from the Mac OS 9.2.2 or the eDrive 10.4.7 partitions.
What I did so far: 'I2232GB' was my main OS X startup volume, 'I1232GB' contains a clone of it, plus additional folders like software base and backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8 through Software Update and repairing permissions all was OK as long as the Mac was just shut down or re-started: it always booted up in Mac OS X 10.4.8 from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same there.
Afterwards I could no longer boot in Mac OS X 10.4.8 from 'I2232GB' nor in in Mac OS X 10.4.8 from 'I1232GB': it just gets to the grey screen with the Apple logo, but the round circle underneath indicating some progress never appears. I left it there for hours: it just hangs.
With the Option key held at startup I could boot from the other partitions with Mac OS 9.2.2 or the eDrive with 10.4.7. None of their Startup Control Panels was able to get me back to 10.2.8!
So I booted from the TechTool Pro 4.5.1 DVD to Optimize both volumes, 'I1232GB' & 'I2232GB', always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to rebuild the directories of both volumes, 'I1232GB' & 'I2232GB'.
Still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Downloaded the Mac OS X 10.2.8 Compo Update (for PPC) and installed it onto both 'I1232GB' & 'I2232GB' while booted from the eDrive which I keep on Mac OS X 10.4.7 - no luck either, still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Then I backed up the users folder from 'I2232GB' onto 'I1232GB', booted from Mac OS 9.2.2 and used Intech's Hard Disk Speedtools 3.6 to format 'I2232GB', afterwards initialized it with Alsoft's Plus Maximizer Extension for a Block Size of 512 Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive '06 and upgraded everything to the latest releases with Software Update. All was working fine with all the required reboots until another startup volume was chosen: afterwards again I can no longer boot back into Mac OS X 10.2.8 on the fresch installed 'I2232GB'!
Any help would be appreciated.
Here is some information found by System Profiler from Mac OS X 10.4.7, eDrive, let me know if you need more:
Hardware Overview:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XA00715VHSF
Sales Order Number: M7628LL/A
ATA Bus:
IBM-DPTA-372050:
Capacity: 19.12 GB
Model: IBM-DPTA-372050
Volumes:
IBM_18GB:
Capacity: 13.12 GB
Available: 6.96 GB
eDrive:
Capacity: 6 GB
Available: 3.03 GB
IBM-DTLA-307075:
Capacity: 71.59 GB
Model: IBM-DTLA-307075
Volumes:
IBM_71GB:
Capacity: 71.59 GB
Available: 39.65 GB
ATA Bus:
PIONEER DVD-RW DVR-107D:
Model: PIONEER DVD-RW DVR-107D
Firmware Revision: 1.21
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
IOMEGA ZIP 100 ATAPI:
Model: IOMEGA ZIP 100 ATAPI
ACARD,6880M:
Name: ACARD,6880M
Type: scsi
Bus: PCI
Slot: SLOT-C
Vendor ID: 0x1191
Device ID: 0x0009
Subsystem Vendor ID: 0x1191
Subsystem ID: 0x0009
Revision ID: 0x0003
SCSI Parallel Domain 65536:
Initiator Identifier: 7
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk2
OS9 Drivers: Yes
SCSI Target Identifier: 0
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I1232GB:
Capacity: 232.89 GB
Available: 14.1 GB
Writable: Yes
File System: HFS+
BSD Name: disk2s3
Mount Point: /Volumes/I1232GB
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk3
OS9 Drivers: Yes
SCSI Target Identifier: 2
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I2232GB:
Capacity: 232.89 GB
Available: 180.11 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s3
Mount Point: /Volumes/I2232GB
The RAM consists of 4 identical modules and is about 1 year old:
DIMM0/J21 to DIMM3/J24:
Size: 512 MB
Type: SDRAM
Speed: PC133-333
Status: OK
Many thanks for your help!
Josef
Apple G4 AGP Mac OS X (10.4.8) 4 internal hard disks, dual layer DVD-RW, 2GB RAM

What I did so far: 'I2232GB' was my main OS X
startup volume, 'I1232GB' contains a clone of it,
plus additional folders like software base and
backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8
through Software Update and repairing permissions all
was OK as long as the Mac was just shut down or
re-started: it always booted up in Mac OS X 10.4.8
from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same
there.
Afterwards I could no longer boot in Mac OS X 10.4.8
from 'I2232GB' nor in in Mac OS X 10.4.8 from
'I1232GB': it just gets to the grey screen with the
Apple logo, but the round circle underneath
indicating some progress never appears. I left it
there for hours: it just hangs.
With the Option key held at startup I could boot from
the other partitions with Mac OS 9.2.2 or the eDrive
with 10.4.7. None of their Startup Control Panels was
able to get me back to 10.4.8!
So I booted from the TechTool Pro 4.5.1 DVD to
Optimize both volumes, 'I1232GB' & 'I2232GB',
always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to
rebuild the directories of both volumes, 'I1232GB'
& 'I2232GB'.
Still I can not boot from either 'I1232GB' or
'I2232GB' in Mac OS X 10.4.8!
Downloaded the Mac OS X 10.4.8 Compo Update (for PPC)
and installed it onto both 'I1232GB' & 'I2232GB'
while booted from the eDrive which I keep on Mac OS X
10.4.7 - no luck either, still I can not boot from
either 'I1232GB' or 'I2232GB' in Mac OS X
10.4.8!
Then I backed up the users folder from 'I2232GB'
onto 'I1232GB', booted from Mac OS 9.2.2 and used
Intech's Hard Disk Speedtools 3.6 to format
'I2232GB', afterwards initialized it with Alsoft's
Plus Maximizer Extension for a Block Size of 512
Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive
'06 and upgraded everything to the latest releases
with Software Update. All was working fine with all
the required reboots until another startup volume was
chosen: afterwards again I can no longer boot back
into Mac OS X 10.4.8 on the fresch installed
'I2232GB'!
I found several typos in above post, wherever it was 10.2.8 it should have read 10.4.8 - I'm very sorry for confusing you, this would not have made sense, but I found no way to edit the existing text therefore I modified the quote of it here.
I do not need Mac OS X 10.2.8 back, but it would be nice to boot back in Mac OS X 10.4.8 from another volume as the current one - which was working fine before with Mac OS X 10.4.7.
Many thanks,
Josef

Hard Drive failed now time capsule connecting to backup volume for hours

My main hard drive went bad. I had a spare in my machine. I installed osx on the spare and then migrated all of my data from my time capsule (which had worked like a champ). I am now running fine again and I have all my files, music, apps, everything I had before my hard drive went bad. Now the only problem I have is when I try to connect to time capsule now, there is a little window which reads "connecting to backup volume". It has been this way for hours and I suspect there is something amiss. If it were simply preparing and looking to see what has changed, it would have connected. Can anyone help me out on this problem? I would truly appreciate it.

John,
*Reboot Time Capsule*
Unplug the TC from the wall outlet.
Wait 10-15 seconds.
Re-plug it in again.
After it has restarted (30-60 seconds), does it show up in Airport Utilities?
If not try "Rescan" again from the File Menu.
Next, if you want to continue using the TC for Time Machine backups do the following:
*Reselect Your Time Machine Disk*
Go to System Preferences --> Time Machine.
Use the slider on the left to turn “OFF” Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your backup hard disk again.
Now use the slider on the left to turn “ON” Time Machine.
Close System Preferences and try backing up again.
*Full Backup After Full Restore*
Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
So even on unchanged hardware, if you reinstall your system software and restore your user data, Time Machine starts anew, and you will not be able to resume backing up with the same history as the previous backups.
While there may be ways to fool/hack Time Machine into recognizing previous backups without performing another full backup, they are likely rather elaborate.
Ultimately, though, in a couple of months, all the effort to preserve old backups may seem pointless. After all, Time Machine will eventually purge away that data anyways as it replaces it with new files.
It may simply be easier to begin a fresh series of backups while saving the previous backups until your satisfied that you have enough history built up. Then delete the old backups.
Let us know if the above helped.
Cheers!

Time Machine says Backup Delayed After Upgrading to Lion

Time Machine says Backup Delayed After Upgrading to Lion on both my Macs. It backs up fine when ever I connect to the USB drive but now seems to want to back up hourly when before weekly was OK. When it does not compleye an hourly backup it reports a delayed backup - failure on both machines. How do it revert back to it reminding me to do weekly backups?

I'm having the same issue with Time Machine on OS X Lion!
According to this webpage: http://web.me.com/pondini/AppleTips/LionChanges.html
Backups (i.e., Time Machine, SD, CCC, etc.) will only save the current "Version" of files.
The above statement sounds like the issue @iJRB and myself are having after upgrading to Lion where Time Machine shows the following error message below within "System Preferences > Time Machine"
@iJRB: Is this the error message you are seeing?

Time Machine doesn't connect to backup volume

I am trying to 'Enter the Time Machine' and it simply hangs. It tries to connect to the server but gets stuck on 'Connecting with backup volume. Eventually, I get the error message "Time Machine couldn't complete the backup - the backup disk image “/Volumes/Data/Larry's iMac.sparsebundle” could not be accessed (error -1)."
I think everything I had in the Time Machine has been lost as it shows 998GB of 998gb free. Annoying but not disastrous as my iMac hard drive is working fine. I just want to be able to backup before upgrading to Yosemite.
I'm on OSX 10.8.5
Can anyone help?
Thanks!

See C-17 in the 1st linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problems connecting to the internet after Upgrade from windows 8.1 pro

Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
Thanks

Hi,
You can also try to install the older version in compatible mode:
Windows 8.1 Wifi showing "limited" or "No Internet Access"
Solution: revert your network adapter driver back to an older version
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
In addition, disable power management on your network driver:
Open Network and Sharing Center.
Click the Change adapter settings link in the upper left of the navigation pane.
Right click the network connection you want to enable/disable power management support on and click Properties .
Click Configure .
On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
If the issue still persists, please upload the event log for our research:
Kate Li
TechNet Community Support

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

Unable to connect to Apple TV after install Mavericks

Hello I'm unable to connect to Apple TV after install Mavericks. :-(
The icon of the Apple TV no longer appers on the top menu and my Mac is unable to discover it...
The Apple TV Box is upedated to the most recent software version.
Apple TV is connected to the same Wifi network of my Mac
I have a:
Mac Book Pro 13-inch, Early 2011
Processor 2,3 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Serial Number <edited by host>
Software OS X 10.9.2 (13C64)
Can anyone help me ????

Hello M.A.S.Ramos,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Wirelessly mirror your Mac screen to your HDTV
http://support.apple.com/kb/PH14375
Make sure your Mac and your Apple TV are on the same network.
Choose your Apple TV from the AirPlay status icon in the menu bar.
Choose This Mac or your Apple TV depending on how you want to match the desktop size of your Mac.
OS X automatically detects an Apple TV when it’s on the same network, and displays the AirPlay icon in the menu bar. When AirPlay Mirroring is active, the status icon is blue.
Have a nice day,
Mario

Unable to connect Wi-Fi network after ISO 6 update

unable to connect Wi-Fi network after ISO 6 update. I'm not impressed.

I updated to ISO 6 on my Daughters Iphone 4S, my Iphone 4, and I have now received my new Iphone 5 yesterday and now all 3 of them have wi-fi issues. I know its not my wi-fi because My Daughters Ipad 2 and my Wife's Iphone 4 is still on 5.11 and the wi-fi works fine. I cant understand why apple have not been saying what's going on and when they will fix it. I have tried everyone's suggestions on this forum and the Internet. Still no luck.

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao.

Can't connect ipad to wifi after upgrading to ios6

can't connect ipad to wifi after upgrading to ios6

Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi. (This is probably not practical in your situation.)
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Unable to Connect to Backup Volume After Upgrade to 10.5.4

Similar Messages

Maybe you are looking for