Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik

Similar Messages

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Curve 9380 unable to connect to the internet via wifi

I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.

Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

Unable to connect to MQ7.0 in BIND mode from Weblogic10.3.4 Cluster

Unable to connect to MQ7.0 in BIND mode from Weblogic10.3.4 Cluster (Managed Servers)
Issue in brief is we are able to connect to MQ7.0 from Weblogic10.0 admin server but not able to connect to MQ7.0 from Weblogic Cluster (Managed Servers).
Below are the details:-
Environment:-
1) Weblogic 10.3.4
MQ Version: 7.0.1.4
Admin Server :- adminserver
Managed Server:- ms1
Managed Server:- ms2
Cluster:- cluster_1 (ms1,ms2)
a) Admin Server (adminserver)
When deployed the application on Admin Server (adminserver) its working fine, able to connect to MQ 7.0
b) Cluster:- cluster_1 (ms1,ms2)
When deployed the application on cluster_1(ms1,ms2) its failing with the error message:-
Error:-
####<Jan 4, 2012 3:27:39 PM CET> <Warning> <EJB> <ahuoms30> <ms2> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <guest> <> <> <1325687259034> <BEA-010061> <The Message-Driven EJB: TestMDBean is unable to connect to the JMS destination: jms/queue/external/TestResponseQueue. The Error was:
com.ibm.msg.client.jms.DetailedJMSException: JMSFMQ6312: An exception occurred in the Java(tm) MQI. The Java(tm) MQI has thrown an exception describing the problem. See the linked exception for further information.
Nested exception: com.ibm.mq.jmqi.JmqiException: CC=2;RC=2495;AMQ8568: The native JNI library 'mqjbnd' was not found. [3=mqjbnd]
Nested exception: java.lang.UnsatisfiedLinkError: no mqjbnd in java.library.path>
Analysis:-
Error Occurs because it is not able to find the mqjbnd in java.library.path.
The JAVA_LIB_PATH="/opt/mqm/java/lib64" valus is set in the startup script for both the Admin Server (adminserver) and cluster_1 (ms1,ms2),
working fine for Admin Server (adminserver) but not for cluster_1 (ms1,ms2).
Connection towards MQ is not working for the clusters(ms1,ms2) when compared with the Admin Server (adminserver) as all the settings in scripts are same.
Does anyone have experience similar issue and solved this issue, please let me know.

In case this happens to anyone in the future, you may also need to add '/opt/mqm/java/lib64' to the LD_LIBRARY_PATH env variable.

Printer wireless direct internet windows

just to verify: On my PC running WIN 7, I can not BOTH
print via wireless direct (WD) on my 3510
AND
access the internet on my wireless home network (WHN)
unless I:
(using WIN 7) switch between the WD network and the WHN network
or
manually disable WD on the 3510 ?
This is inherent in the WIN7/WD implementation? Yes/no?
This question was solved.
View Solution.

Hi,
Indeed by connecting to the Wireless Direct network you will not have internet access, that is an expected behavior:
Wireless connection issues > How do I print wirelessly without a wireless router? > Downsides to peer-to-peer networking:
Your computer can only connect to one wireless network at a time. When it is connected to your printer, it cannot also connect to a wireless router (for Internet access, for example).
http://www8.hp.com/us/en/campaigns/wireless-printing-center/faq.html
To gather full network functionality you will need a router to connect both the printer and the internet.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes

Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes / Remote?
I know this can be achieved by the remote app.
Airplay functionality appears only to support 1 set of speakers at a time?

Hockeyfanatic wrote:
Does anyone know how or if it's possible to stream my music from the iPhone to iTunes via bluetooth or wifi? Essentially I want to share the iPhone's library with iTunes (I know one can go the other way).
Here's why: I'd like to stream my music at work to my computer's speakers without taking the phone out of my pocket. I obviously don't have my home music collection on my company computer. And I figure if I place the phone on my desk to plug it in and play through iTunes, I could easily walk off without the phone. That would be bad (out of contact) and potentially sad (stolen).
It seems right now the only bluetooth connection to a computer is for the remote application.
Wait until November. Airplay/Airtunes iOS 4.2 announced for iPhone to iTunes/iTV. If you want a BT audio stream now, you can add a dongle to the PC for headset streaming.
As far as WiFi file transfer iPhone to iTunes, you can't. There's talks on it but nothing concrete. Except JB.

Unable to connect 3050 deskjet wirelessly

hi, trying to connect my deskjet 3050 wirelessly to my netbook. have installed drivers, infact the printer connects to my network, it just doesnt receive an IP address. can any1 advise me why? is it possible for me to assign an IP address manually, if so how?i have another leptop connected, 2 phones & ipod to my router, mac address filtering is not on. and i have entered the wireless key manually 3 times, just to be sure!
any help would be great!!
This question was solved.
View Solution.

yes, i have the latest drivers/software from hp site taken 26th dec 2010. i am running xp, wpa secured network, AVG & Zonealarm, can print using usb but fails to connect wirelessly.
i have printed the report, which shows all successful and no errors. the only error i did see was that in my last post, IP address had failed to be assigned.
i have ran the cd in another laptop this morning (as my original entry had been against a netbook which didnt have a drive)same issue...
mac address filtering is off, ssid is being broadcast. all zonealarm & spybot requests for printer have been allowed.
pls help!

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Why can't I connect to my 3520 via wireless?

I have a HP Deskjet 3520, and I am running on Windows 7/64 bit.
I have been able to setup my printer through the USB, and I have been able to get my printer connected to the same network, and have setup e-print even. However, I cannot connect to my printer via the wireless, and my iphone cannot detect it through the e-print app.
I have tried turning odf firewalls, re-installing, turning of every part of the chain (ie laptop, printer, router...)
I even tried to connect through my MacBook, and still, I can only "see" it through the USB, even though the printer has an IP address and is able to receive documents through e-print.
Is this a known issue?

Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Connecting MacBook to printer via wireless network

I have a wireless network via cable modem with some PCs attached and a printer but am having trouble connecting my new MacBook to the HP LaserJet 2100 printer via wireless. I do not have airport express and not sure I need it to have the MacBook print to this printer. Please advise.

Hi topgunner,
How is the printer connected? Are you trying to share it via a PC through wireless? Or is it connected directly to a router/hub that is enabled for printer sharing?

Unable to connect to Deployment share via the 2012 Update 1 workbench.

Hi Everyone,
This is a tricky one, I've been scratching my head for a few days now. I have a MDT deployment share, which lives on a server, for argument sake, lets call it: MDT-01. Via the Servers MDT Workbench, I can connect to the deployment share just fine, from
any PC, other than my main PC (which is running Windows 8.1), I can connect to the deployment share just fine. If I load the MDT Workbench on my main PC, it just has a deployment share folder with a red cross on it. If I attempt to remove it, it crashes the
MMC, if I try and open the same deployment share it crashes the MMC. If I give the Deployment Share a different share name, it errors and says I can't use an existing deployment share folder.
I used to be able to connect to the share just fine, but since the last couple of days I've not been able to connect.
Further investigation with PowerShell reveals that the console thinks it has a persistent drive, DS001, but the path is blank, as in ''.
Restore-MDTPersistentDrive -verboseVERBOSE: Restoring drive 'DS001' with path ''WARNING: Unable to restore drive DS001.
If I try to remove the Persistent drive, it errors, and if I try to add any new drive to either the same deployment share, or an alternative, it fails.
I can use the New-PSDrive and Remove-PSDrive Powershell commands to create/remove a replicated drive, but that doesn't actually change the Path value in the Get/Restore-MDTPersistantDrive, as they seem to be separate, even though I think they should
be linked.
The Internet has been no help, so I'm asking the Microsoft crew to be helpful, and not just do the usual "This is posted in the wrong place, this question will now be closed... etc, etc!" This is an MDT question, not a Powershell question, I just
need anyone who has indepth MDT knowledge to look at this.
To make clear, this is not a question about a client connecting to the deployment share, that all works fine, and I can update the deployment share fine from any other workbench.
I cannot connect to my deployment share, from my local MMC MDT workbench, as it thinks it already has one, but with a blank path. I've uninstalled, and reinstalled both the MDT, and ADK components on my Local PC, but I still cannot connect to the Share.
My question is this: The files/registry that stores this DS001 path setting is clearly local to my PC, but where is it, I've search the reg, and I've check files, but to no avail, I'm likely to rebuild my PC because of this, but I'd rather not if I can help
it.
Any Ideas people?
P.s. Sorry if this post seems rude, I do appreciate the help, I just don't have time for being messed about, as we're migrating our XP system to 7, and with less than 60 days remaininf, I could do without this... Thanks for understanding. :D

Persistent drives are just a easy way for the MDT console to keep track of the Deployment Shares you like the most (think of it as "pinning" Deployment Shares to the console).
The list of persisted Deployment Shares are per user and stored in the file:
"%AppData%\Microsoft\Microsoft Deployment Toolkit\User.Config"
Mine looks like:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<userSettings>
<MDTProvider>
<setting name="Drive1Name" serializeAs="String">
<value>DS001</value>
</setting>
<setting name="Drive1Path" serializeAs="String">
<value>C:\DeploymentShare</value>
</setting>
<setting name="Drive1Description" serializeAs="String">
<value>MDT Deployment Share</value>
</setting>
</MDTProvider>
</userSettings>
</configuration>
Make sure the Drive Path points to something valid, otherwise, I would delete (rename) the file and let MDT re-create the file.
I hope this answers your question.
Keith Garner - keithga.wordpress.com

OD users unable to connect to a server via afp

We have a Mac OS 10.9.2 with Server 3.1.2. We are able to access the server for file sharing via smb with OD accounts just fine. But we are unable to connect to the server using afp with any OD account, only local system accounts. I have tried turning off SMB for all of the file shares, but this did not help resolve the issue.
The log shows a login attempt immediately followed by a logout.
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Login -----" -5023 0 0
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Logout -----" -5023 0 0
I did edit out the user and the server name.
Any help would be greatly appreciated.
Thank you.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

HT204409 unable to connect my ipad to my wireless internet - all other devices including another ipad, ipods, laptops etc.. connect fine?

Can't seem to connect one of my ipads to our wireless network at home - every other device in the house is connected?
any suggestions?

Did it ever connect? How about to other networks?
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
When unable to connect to 802.11n WiFi Networks
http://support.apple.com/kb/TS3727?viewlocale=en_US&locale=en_US
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199

Connect to PC Companion via Wireless

Hi everyone, I have a SE XPERIA X10. I don't use PC Companion often enough just because, whenever I want to connect to my pc, I need to get the micro USB to do that. PC Companion offers connection via wireless for only 4 phones (3 models). XPERIA Arc, Play and neo. Why won't they do that for all XPERIA phones? Not even for X10 (which was much more expensive that Arc!). They all do offer wireless connection and can't seem to find the reason they won't let you connect that way. Any suggestions? Do the guys at SE ever see these posts and questions? Do they ever answer?

I know you do and I hate it (having to disconnect the USB from my charger each time I wonna connect to my PC). I just wish they improve it at least with the possibilities the And.2.3 will have. Maybe they 'll add it up the

Connecting two EA6500 routers via wireless bridge

Hi, I want to know how can we bridge two EA6500 routers via wireless. I do not want to use the lan cable. Please help.
Thanks,
anandp

This setup is not possible. You can only cascade the routers via wired connection. The access points on these routers are mainly transmitters, they're not receivers so you can't associate them wirelessly. You can, however, get a wireless bridge to do the job. Check out the Dual Band N Entertainment Bridge WET610N and Wireless N Universal Media Connector WES610N.

Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Similar Messages

Maybe you are looking for