Unable to continue activation after i upgrade version

unable to continue activation after i upgrade version in my 3gs who knows how to solve it?

That's almost always because the phone was hacked to illegally unlock it.

Similar Messages

  • Mac OS X 10.5: Unable to log in after an upgrade install fix does not work?

    Hello:
    After running Software Update, I am unable to log in.
    I found the following support article:
    Mac OS X 10.5: Unable to log in after an upgrade install
    Article: TS1543
    http://support.apple.com/kb/TS1543?viewlocale=en_US
    However, upon step 8 of the instructions, the following error appears:
    delete Invalid Path
    <dscl_cmd> DS Error: -14009 (eUnknownNodeName)
    This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
    This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
    Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
    If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
    Any suggestions are greatly appreciated.
    -Warren

    baltwo:
    Thanks! I think a week would have gone by before I realized this on my own.
    -Warren

  • We are unable to continu activation ipad itunes

    Hi ,I'm try i g to activated my Ipad 2 but i won't activated
    "we are unable to continu activation ipad itunes" any ideas how to solve this problem

    Hi All,
    I solved the problem, Activation with Itunes 10.4.1 did n't work,
    Used an other Mac with Itunes 10.2 and no with activation problems. :-) strangsssss
    Regards Bram J

  • Received an error message "unable to continue activation" on I-Pod Touch.  Can anyone help?

    I am receiving an error "unable to continue with activation" for my IPod Touch. Any suggestions?  We have an account with ITunes but it is for another IPod.  ITunes won't recognize this new one.

    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • TS3406 unable to make calls after iOS7 upgrade

    Howdy
    After my upgrade I am unable to call out unless on my wifi, but can receive.  Seems like a switch to throw, no?

    If that's the case, what did the carrier tells you when you ask them?
    Do a Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    Message was edited by: ckuan

  • Canon Wi-Fi Printer Unable to find SSID after OS upgraded

    I am using Canon MG4100 series printer. After I upgraded my iMac OS X 10.9 and also upgraded the firmware of my Time Capsule, my printer is no longer able to find the SSID. While all other devices have no issue except the Canon printer. Anyone can help?

    Make sure the wireless names.. and TC name is smb compatible.
    Short.. 2-20 characters
    No spaces
    Pure alphanumeric.
    The standard apple names are invalid in most OS.
    Even apple manipulate the network names..
    Turn off security and fix the wireless to 11, 6, 1 in that order.. just as a test. If all of them fail,
    Then I recommend you buy a cheap TP-Link, edimax etc wireless router and use it as a WAP.. plugged into the TC.

  • Unable to eject DVD after Win7 upgrade on Satellite L series

    I have finished the windows 7 upgrade.
    Everything went smoothly except thta at the end I was unable to eject the windows 7 upgrade DVD.
    Using the push button on it, or right click on the lector then eject, nothing happens.
    Should I look for drivers and where?

    Hi
    You dont need any drivers for that
    If the CD/DVD drive is connected properly then you should be able to eject the disk without any big troubles maybe something clams somewhere
    There is a tiny hole near the eject button use an small object like staple or something like that and put it carefully into this small hole. This should help to eject the disk.
    Cheers

  • Continuous crashing after ML upgrade

    Ivan,
    Since I seemed to have "irritated" someone but seem to be having the same problem as the other gentleman I figured it best I start another thread.
    I will post the crash report on this thread when I get home this evening.
    Thanks for Your help.
    OSX ML crashes continuously after upgrade.
    27" iMac core 2 duo 16gig ram late 2010
    As I said before I have Parallels , V Box and sound flower installed but I also had crystal black installed to theme thee Mac with.
    I uninstalled the CB and it seemed to be fine until this morning when it woke on the schedule I have set up. Nothing will open ,finder , mas , mail , etc. etc.
    If you still want me to post the crash report just let me know.
    And again , Thank You

    Since I seemed to have "irritated" someone
    As I said on the other topic, I'm just trying to help you get your question in the right place, in front of the right people, and without disrupting an existing discussion.  No irritation involved.  That's hard to convey properly in a written medium.
    As I said before I have Parallels , V Box and sound flower installed but I also had crystal black installed to theme thee Mac with.
    I uninstalled the CB and it seemed to be fine until this morning when it woke on the schedule I have set up. Nothing will open ,finder , mas , mail , etc. etc.
    I would definitely recommend removing Soundflower, as I've seen that implicated in problems on other machines.  Be sure to use the uninstaller that comes with the installer.
    Also, in general, "theming" or "skinning" applications for the Mac are a bad idea.  They usually do their work by replacing system files with custom files, and that can cause problems, especially when they are used with a newer version of the OS than they were designed for.  I'm not familiar with Crystal Black, but it's possible it has damaged your system.  I would contact the developer of that app regarding Mountain Lion compatibility.
    Parallels and VirtualBox should not be problems, if you are using the most recent versions of both.  Be sure to check for updates for both, and install whatever updates may be available.  If you're not using one or the other, remove the one you're not using.  (Again, with the provided uninstaller.)
    When you say "nothing will open," what does that mean?  What happens when you try to open an app?  Are those apps crashing, or not opening, or what?

  • Unable to download Application after iOS4 upgrade

    I tried to download / update apps directly to iphone after upgrading to iOS4, but was prompted the message "Unable to Download Application.... will be available for download when you log in to the iTunes Store on your computer"
    Anyone can help??

    Most of the users with the updated iOS4 were suffering with the similar problem.
    Only download via Wifi is OK, for 3G network, it prompts the same msg as u said.

  • Unable to close "Notes" after Mavericks Upgrade

    Hi Everyone,
    I am using a MacPro (pre retina version) 2.4 Ghz,i5 version and recently upgraded to Mavericks.
    Post upgrade, “Notes” automatically opens and stays on top of other applications. Force Quit doesn’t help either, causes it to reopen. It’s practically making the Mac unusable with the focus automatically shifting to “Notes” every 2-3 secs, even if I am using any other program. I have tried restarting and re-installing Mavericks.
    Any suggestions ?
    Thanks,
    - K

    While Notes is open, try doing Notes > About Notes from Notes' menu.
    Does it show Version 2.0?  That is the proper version to accompany Mavericks.
    If it shows something else, it is either not the Apple Notes product, or incorrectly left over from some previous OS X.

  • Business functions to be activated after EHP4 upgrade

    Hi All,
    I have recently upgraded ECC 6.0 to EHP4.The following technical usages were selected during download.
    Financial Services,Financial Supply Chain Management and Financials.
    Please let me know what all business functions that are to be activasted.
    Do I have to activate business functions for EHP2 and EHP3 as well.Below are the BFs for our usage types.
    Business Function                           Technical Usage                         EHP
    /IBS/EAFS_RBD_BUSOPR                           Financial Services                          4
    EAFS_BCA_BUSOPR                           Financial Services                          4
    EAFS_CML_LOANS_POOLING                Financial Services                          4
    FICAX_BILL_INVOICING                           Financials                                                4
    FICAX_CI_1                                                Financials                                                2
    FICAX_CI_2                                                Financials                                        4
    FIN_FSCM_CCD_INTEGRATION               Financial Supply Chain Mgmt     4
    FIN_FSCM_INTEGRATION                           Financial Supply Chain Mgmnt     2
    FIN_TRM_CORR_FW                           Financial Services          4
    FIN_TRM_INS_HM                           Financial Services          4
    FIN_TRM_LR_FI_AN                           Financial Services          3
    FIN_TRM_LR_FI_AN_2                           Financial Services          4
    FIN_TRM_PSM_INTEGRATION      Financial Services          4
    INS_FSSR_CI_1                           Financial Services          3
    INS_FSSR_CI_2                           Financial Services          4
    INS_FSSR_I18N                           Financial Services          4
    Out of the above FICAX_BILL_INVOICING,FICAX_CI_2,FIN_FSCM_CCD_INTEGRATION,FIN_TRM_INS_HM and FIN_TRM_LR_FI_AN_2 have dependencies like X_CONT or BI_CONT which are not installed on the system.
    I guess I can't activate these business functions.Am I right?
    And I read that only one BF set is activated per one system.I did not find any BF set related to Finance in the drop down list of SFW5 in the system.Please enlighten me on this topic.
    Regards,
    Dinakar
    Edited by: mutnuru dinakar on Mar 8, 2011 1:44 PM

    > Thanks for your reply,as I mentioned the list of BFs are applicable for the 3 technical usages I  had selected during EHP4 upgrade.I need to select out of them.
    I understand your question - however, how should anyone else but you know whether you need the functionality behind them? This is a business decision.
    I suggest you use the documentation (press on the corresponding "i" in SFW5) to see if the business requires the functionality. If yes, enable it, if not, you don't need to enable it.
    Some of those BFs will need a BW/BI to work. You have to decide, whether you need them or not.
    Markus

  • Unable to reactivate WAE after sw upgrade to 4.2.3c

    Hi all,
    on another WAE i have the problem that it didn't come back Online.
    reboot of the device didn't fix it.
    additional "cms recover identity" failed even if everything looks like described in config guide.

    Dieter,
    Before you tried doing the cms recovery identity default, did you mark the device as replaceable in the CM? 
    Once the above screen has been verified try the following on your WAE:
    pdi-7341-19#cms deregister force
    Deregistering WAE device from Central Manager will result in loss of data on encrypted file systems, imported certificate/private keys for SSL service and cifs/wafs preposition credentials. If secure store is initialized and open, clear secure store and wait for one datafeed poll rate to retain cifs/wafs preposition credentails.
    Do you really want to continue (yes|no) [no]?yes
    Disabling management service.
    management services stopped
    Sending de-registration request to CM
    Failed to contact CM(Unmarshaled: 9001). Please check connectivity with CM device and status of management service on CM.
    Device de-regsitration failed, removing device registration information.
    Please delete the device record on the Central Manager.
    SSMGR RETURNING: 7 (Success)
    Removing cms database tables.
    Re-initializing SSL managed store and restarting SSL accelerator.
    If cifs preposition credentials are configured, please reconfigure preposition credentials using 'accelerator cifs preposition credentials username password {0 | 1} ' config CLI command
    Deregistration complete. Save current cli configuration using 'copy running-config startup-config' command because CMS service has been disabled.
    pdi-7341-19#cms recover identity default
    Is device identity recovery used for WAFS 3.x device migration to WAAS (yes|no) [no]?
    Registering WAAS Application Engine...
    Sending device identity recovery request to Central Manager with address 14.110.3.21
    Please wait, initializing CMS tables
    Successfully initialized CMS tables
    Registration complete.
    If core or edge service was enabled on the device you're replacing, this device will be reloaded upon successful activation
    pdi-7341-19(config)#cms enable
    Please preserve running configuration using 'copy running-config startup-config'.
    Otherwise management service will not be started on reload and node will be shown
    'offline' in WAAS Central Manager UI.
    management services enabled
    pdi-7341-19#sh cms info
    Device registration information :
    Device Id                            = 348                                
    Device registered as                 = WAAS Application Engine            
    Current WAAS Central Manager         = 14.110.3.21                        
    Registered with WAAS Central Manager = 14.110.3.21                        
    Status                               = Online                             
    Time of last config-sync             = Sat Jan 15 20:40:56 2011           
    CMS services information :
    Service cms_ce is running
    Hope this helps,
    Mike Korenbaum
    Cisco WAAS PDI Help Desk
    http://www.cisco.com/go/pdihelpdesk

  • Unable to import CD after installed latest version iTunes 10.1.0.54

    I just updated and installed the latest iTunes 10.1.0.54, but uable to import CDs. There always an error box pop up and the iTunes closed down automatically.
    I read through the forum and realised many people encountered same problem, but the advises are too complicated to me....Anyone could advise easy fix suggestions?
    Thanks

    See the workaround posted by "b noir" in this thread
    I've been rendered obsolete, Dave!
    iTunes 10.1.0.56 has been released. That contains a new Apple Application Support version 1.4.1, which contains a new CoreAudioToolbox.dll version 7.9.5.0 (up from the 7.9.4.0 version that was causing trouble for people).
    I'm not seeing the new version in Apple Software Update yet, but it can be grabbed from the download site at Apple:
    http://www.apple.com/itunes/download/

  • Unable to fetch mail after system upgrade

    I use Evolution as the mail client for several months and everything goes fine, however, since last week, (or several days ago, I'm not quite certain), It always hangs when fetching new mails. More specifically, it hangs after the POP3 summary is successfully fetched. That is, the total amount of new mails is correctly shown, while the mail contents could not be downloaded from the server. I tried two other mail client, sylpheed & balsa, while the former worked perfectly, the latter hanged just exactly as what evolution did. Different mail servers were also tested, the results showed that all POP3 protocal based opertations were failed, but nothing wrong was found for the SMTP & IMAP based operations.
    Does any one have any idea? Is is possible that Evolution & Balsa share some buggy library which functions as the POP3 mail fetcher?
    Last edited by d7wang (2009-05-17 08:30:33)

    Don't double post....  you risk both being closed.
    Reply here: http://bbs.archlinux.org/viewtopic.php?pid=554458

  • Why after i upgraded version 6.1.2, My mail for yahoo cannot connect to my email ?

    My ipad, Mac book and iphone also cannot connect to yahoo mail ?

    I've had the same problem. Updated last night and haven't been able to use the phone at all since then. Black screen, grey screen, light blue screen, pixelated screen, white screen with darkened corners, flickering screen, white stripe across screen, no connectivity to anyone's computer incl bluetooth. Recurrent dead battery. Occasional apple on screen.
    Dead.
    Have you had any joy with yours? Or should I just bin it?

Maybe you are looking for