Unable to create Business System with role Integration Server

hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AM

Hi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus

Similar Messages

  • Connect one Business system with two Integration Server

    Hello,
    Can we able to connect one Business System with two Integration Server?
    I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
    I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
    Is this possible ?Is there any work around solution there?
    Thanks.

    Hello ,
    This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14  .
    I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
    Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14  ?
    Thanks.
    Lakshmi
    Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
    Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

  • How to create Business System in SLD with Role "Integration Server"

    Hi,
    We were trying to create a Business system of role "Integration Server" in SLD. However, we are getting an error saying "There is already an Integration Server defined foer the selected Technical System. Select as Application System."
    We could not find any relevant BS with the role "Integration Server" for that Technical System.
    Please advice.
    Warm Regards,
    Bhaswar

    hmm
    I have same situation on a fresh installation.
    Also error "There is already an integration server defined for the selected technical system; select the Application System role".
    But, there is no Business system at all visible and also the Business system tab of the technical system is completely empty.
    What to do?
    BR Patrik

  • Create business partner with role 'Internet User' via BP

    Hi,
    We want to create business partner with role 'BUP005 Internet User'
    for purpose to link with created early user su01.
    It's work via isauseradm application, Web UI.
    Now I want to create new role 'BUP005 Interner user' via GUI. I started Tcode BP.
    I filled USERNAME, password, roles. I tried to save BP.
    I got this error:
    Enter the Internet user
    Message no. R11214
    You have maintained attributes (logon data, roles and/or fixed values) for the Internet user, without having entered the Internet user itself.
    But,
    Field 'INTERNETUSER' is not changeble.
    Denis.

    Hi, DJ
    Thank you for answer)
    1. Have you saved the BP. If Yes, just see if the INTERNET USER maintained is available in SU01.
    Yes, but I can not see  INTERNET USER in the BP.
    2. If you are not able to assign the INTERNET USER, please try to maintain the INTERNET USER in BP.
    I can not do it, because I can not change field INTERNET USER
    3. If the INTERNET USER field is not available, just check the authorization for the same.
    I has all authorization: sap_all.
    Denis

  • Problem by Maintaining a Business System for the Integration Server

    Hi to all,
    I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
    Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
    Since than I’m receiving the following error message when I try to refresh my adapter engine cache:
    com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
    Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
    I’ve also checked the IS URL (TR: SXMB_MONI) and it seems that it’s ok. 
    Regards
    Naycho

    Hi Naycho,
    i think you have to clean up some sld rubbish
    Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side  "business system". Delete all entries you find for your business system, after that try to recreate it.
    Regards,
    Udo

  • SLD:  recreate deleted Business System of type Integration Server

    Hi,
    accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
    "Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
    Any ideas to create such a business system?
    The old one isn't there in the list, after i deleted it.
    regards,
    ms

    Hi,
    If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
    Maintaining a Business System for the Integration Server
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    Regarding Integration server in Business System  
    Regarding Integration server in Business System
    Refer editing the Business System
    http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
    Thanks
    Swarup
    Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

  • How to create business partner with Role : "Loyalty Partner"

    Hello,
    During the creation of Loyalty Program, we can add loyalty partners which are Business Partners created with Role --> "Loyalty Partner". In standard package I could not see the the Role "Loyalty Partner"
    For this role to be available during the creation of Business Partner, does any business functionality needs to be activated or should we create new role "Loyalty Partner" through BDT
    Thanks
    Ram

    Hi Vishal
    Thanks for your explanation but I think it has not answered my question fully.
    Yes, I do agree that only Loyalty Partners can be added in a Loyalty Program and those are Business Partners.
    If you read through my question, I have asked how the system differentiates between Business Partners for example a sold to party and Loyalty Partner.  In other words, which part of data in the Business Partner is the one which actually differentiates a Loyal Partner with other Business Partners. I think, just creating a Business Partner with Role --> Loyaly Partner will not serve our purpose.
    The BP view is the same and the BP Role category does not contain my customization to differentiate this
    Hope you understand what I am trying to say. Please let me know if you have any questions !!
    Regards
    Ram

  • Logical System for Role Integration Server

    Dear all,
    I need your help to clear my confuse.From ID I had assign business system as defined by Role Integration Server but when I check Adapter-Specific Identifiers, nothing show in Logical System. I already define Logical system in SLD. but I'm not sure incase of Role Integration Server will show logical system same with role Application System or not. becasue the other one as role Application System it's fine.
    Thanks and Regards
    Park

    Hi Park,
       I could not clearly understand your question .But i think you want to know the roles of the Integration server and Application system.I would like to share some thing on their difference .Hope this will clearify you.
    A business system can be configured as an Integration server or Application system:
      Integration Server
    The Integration server executes only integration logic available Integration Builder. They can also be identified as Pipe Line Steps. It receives XML message, determines the receiver, executes the mappings, and routes the XML message to the corresponding receiver systems. Thus configured Integration Engine is identified to be Central Configured Integration engine.
    Note: Only one client of SAP system can be configured as Integration Server.
       Application system
    The Application system will not execute the integration logic. It in turn calls the integration server to execute the integration logic if required. It acts as sender or receiver of XML messages. So, the Application system with a local Integration Engine requires the Integration server to execute the integration logic
    Thanks,
    Ram.

  • Configure Role of Business System " as Central Integration Server , PI

    Hi Experts,
    I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
    Regards
    Praveen

    Hi Praveen,
    For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role  of business system as  Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as  '/sap/xi/engine?type=entry'.
    Thanks & Regards,
    Priyanka Anagani

  • Business System of type Integration Server In SLD .

    Hi
    Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
    And also can we have only one  Business system of the type integration server in the sld ?
    Can anyone please explain the concept behind this.
    Thanks
    Nilesh.
    Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AM

    hi,
    steps to create a business system
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
    If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
    To define a business system, follow post installation steps from install guide.
    http://service.sap.com/instguides
    SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
    If you do not have integration server, that means your XI will not work.
    Thanks,
    Vijaya

  • How to change the ROLE: Integration server in business system in SLD

    Hi,
    I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
    In SLD, business system, 'integration' tab there is button "Associate with XI'.
    I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
    When I press the button "Associate with XI" and Save nothing happened.
    How do i change my integration server.
    Please help.
    Regards,
    Rehan

    Hi Gaurav,
    I have checked the teachnical system  and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
    I realised that both the business systems has been defined with role: integration server.
    IN one business system i can see that there is "associate with XI" button.
    But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
    Can you please let me know the procedure to chnage the technical system with respect to integration engine???
    PLease help as our project is held up due to this.
    regards,
    Rehan

  • Unable to create Business Place

    Hi Experts,
    I am unable to create Business Place in my Ides Server. when i follow the path Fin Acctg-Fin Acctg Global SettingWTax-Extended W Tax-Basic Settings-India-Define Business Place.
    Here i get the selection screen as Company Code  Section Code  Name 1 which should had been Company Code Business Place TAN Number.
    Please provide inputs how do i get this done.
    Regards,
    Rahul

    Dear,
    If you want to create Business Place then maintain view J_1BBRANCV using transaction SM30.
    To create section code maintaining view J_1I_SECCODE using transaction SM30...
    Note
    Now Business Place is no longer used in Withholding Tax which has been replaced by Section Code.
    Regards,
    Chintan Joshi

  • Integration Server not found while creating  Business system

    Hi all,
    I m facing following problems in XI.
            While creating Business system, "integration server" name  is not displayed in the drop down box. and
    I m getting the error  "Unable to read software component versions from System Landscape Directory "XXXXXX:50000"" while importing software components in Repository from SLD.
    thanks and regards
    vijay

    Hi Vijay
    Please check if you have assigned the correct Integration server to the business system in SLD.
    and for the the software component error check if the user has required access (roles assigned) for importing the software component.
    Thanks
    -Mitesh

  • Why specify Integration server when create Business system?

    Hi, all:
    I had difficult understanding why we need to specify the assigned Integration Server when we create Business System. What is the reason for this? What is the mechanism underbeneath this?
    It is easy to understand that when creating BS, you need to specify TS name, product and SWCV. But why integration server?
    Will you please explain to what your understanding it regarding this topic?
    Thanks,

    This is because the same SLD could be used to connect to more than one Integration Server. This is a typical requirement wherein the system landscape has Dev, Quality & Production systems and all the XI servers uses same SLD. At that time it would be easy to specify which Business system will refer the Integration Server of which XI system.
    Regards,
    Prateek

  • PISUPER not able to create business systems

    Dear All,
    I am trying to create business systems in ID using PISUPER by importing from SLD. However, I keep getting a warning message saying 'Insufficient authorisation to create communication component'.
    I check for all the required roles for PISUPER and they exist.
    When I checked the J2EE logs, i can see the below error:
    Context does not exist session id=com.sap.engine.session.exec.UserContextImpl@254ea7b6[ clientId=null, clientSessions=[], persistent Model=null]
    Location: com.sap.conn.jco
    Please could someone help me to resolve this.
    Thanks
    Vasu

    check if you have USERS: PIDIRUSER & PIREPUSER
    with Roles:
    SAP_XI_ID_SERV_USER
    SAP_XI_MONITOR_J2EE
    And User Type must be service.
    Also check Users are not locked.  
    also check if everything is fine with user SAPJSF...
    (TCP/IP) LCRSAPRFC should point to correct Integration Server.  Also the Program ID should be registered in the JCO connections of Integartion server with user SAPJSF.

Maybe you are looking for