Unable to create new windows live id......the mess...

i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????

mallar wrote:
i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????
why would you steal your music id password? ..nokia id / account is different from windows live id btw.
maybe you already have a windows live account, thats why its showing the that problem. check settings > email+accounts > you should ideally have only one(1) 'microsoft account' in there. if you want to use another one, you might want to just 'change' the existing one with your new credentials.

Similar Messages

How to create more than one window for a vi that can be acces anytime...just like using the creating new window in internet explorer

hello guys,
I want to create a vi such dat when I press a button on the frontpanel of the vi it opens the same vi in another window..and I should be able to work on this new window also able to work on the previous window without closing it...Just like opening a new window when using the internet explorer....
I try to make my vi a reetrant vi but when I click the new window button on my vi..a new clone windows open up that I can control but the previous windows is not accessible not I close the current window...I want a way that I can acces both vi window and d operation of one will not affect the other like when the indicators are updating in one window the other window will not update...
Thank you...
Solved!
Go to Solution.

The picture attached shows what i want to achieve as a vi or executable...The new window button opens a clone of the vi, but the previous window can not be operated on until i close the clone window...i want to be able to work on both window at any time without closing one of them....The vi was design in labview 2010
Attachments:
ni.jpg ‏66 KB
window vi.vi ‏8 KB

In the last several versions of Firefox Pop-up Site that should be blocked are creating new windows. Why?

I have several computers. On each computer Firefox operates different. On the system I am writing these words. Every time I open a link Foxfire opens a new set of windows instead of a new tab. On my laptop Firefox opens a new tab when I want to open a new link. I think that this the way it should be. I have looked in the options to try and fix this but there is NO option to correct this. Both the computer are running the same version of Firefox. On the system I am writing this when new window pops up it creates two windows, one with a web page and one with tiles. I am running Windows 7 on all my systems not Windows 8. The laptop does not do this. If a unwanted page pops up; say a Web Cam site or Dating site that Pop-up Blocker use to block appears there is a race to close it because Firefox switches back to the page you were on before the new windows appeared. The Firefox on this system I am writing on also does not allow scrolling when something is being highlighted anymore.
I use Firefox because it allows me the configure it to use Applications on my computer to open, view, and save material from the Internet unlike the other browser that are available. Can someone fix these bugs?

It could be the work of one of your add-ons, or even add / mal-ware.
Look thru your add-ons list and make sure you know what each one is
there for. Also,
check the programs that are on your computer
'''''Windows > Start > Control Panel > Uninstall Programs.'''''
Go thru the list and use a web search to check any that you don't
know what they are.<BR><BR>
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]'''''

Is here a way to sync iPod/iPhone with the new Windows Live Mail?

hi everyone,
since i bought my ipod touch 2nd i recorded down my itinery into the iPod,
and about syncing, although troubled by the 0xE800002E error when syncing apps,
i still enjoyed a brilliant mailing function and could sync with the Windows Mail which i was using for a while
but after changing to use the new Windows Live Mail, attracted by the easy calendar function built-in, i found that the iTunes cannot recognise Live Mail, and of course not to syncronise it
this is much a trouble to me right now, and i hope someone can read my poor english
Please give me some advice, really thanks
ps,i have outlook but i dont really tend to use it

Allan Sampson wrote:
You can sync contacts, calendar events, notes, and tasks with a compatible version of Outlook.
You can sync Tasks to Reminders, but with the caveat that it is only possible via an Exchange server or iCloud.
Contacts, calendar events, and notes can be synced via USB/iTunes (in addition to iCloud or Exchange).

My pinned tab for Firfox 4, for Window 7 keeps creating new windows. When it never used to. Why is it making another window when I already have a tab at the bottom?

My pinned tab for Firefox 4, for Window 7 keeps creating new windows when I click it. When it never used to. Why is it making another window when I already have a tab at the bottom?

Hmmm, mine stack up over the pinned icon as you would expect (Win7Pro x64). Is there anything special about the way you're starting up Firefox? Security sandbox? Using any command-line switches?

Java.lang.OutOfMemoryError: unable to create new native thread on Win2000

Dear all,
I install a java server (SAP J2EE) on the windows machine and run into the following problem: the total number of threads cannot exceed 1200 (as i see this in the task manager)
After it does reach this number no other tasks can be started. Thereafter i get java.lang.OutOfMemoryError: unable to create new native thread error .
However the other machine where the same distribution of Win2000 Server is installed can easily coupe with more than 2500 theads. The same is true when the safe mode on the first machine is on: I can generate more than 1200 threads. So it seems the problem has something to do with Windows itself.
I am really puzzled here, would really appreciate any help.
Thanks in advance,
Dimitry
Surkov Dimitry
[email protected]
+49.1632.492618

well, i do not supply any options when i start jvm, but it is not the course:
it also happens with c programs. however in the safe mode it works. both for c and for java program.
so it must be either some software (however memory is ok) or ...? i am lost. In some Unix system you can set the total number of threads allowed as an option in the kernal. But i guess this is not the case with windows.
Thanks a lot for your reply,
dimitry

Help! Unable to create new native thread

Ok I see this problem all over the web but most of the posts are many years old and still leave me a little confused. Often at random times on the same tags like CFLDAP I get the error "Unable to create new native thread". Then a few minutes later the same tag on the same page works just fine.
I have 4GB of memory in this box with 1400 MB set as the maximum Java heap size by the way.
Here are my arguments from the jvm.config file.
# Arguments to VM
java.args=-server -Xmx1400m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars,"C:\\Program Files\\Apache Software Foundation\\Apache2.2\\htdocs\\InterWeb-Prod\\includes\\classes"
Here is a typical error that comes through.
struct
Browser     Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4
DateTime    {ts '2010-06-23 10:07:44'}
Diagnostics unable to create new native thread null <br>The error occurred on line 122.
GeneratedContent
HTTPReferer http://--------------------/index.cfm?FuseAction=HR.main
Mailto      interweb@---------------------
Message     unable to create new native thread
QueryString fuseaction=ManagedLists.MailSubscriptions
RemoteAddress     192.168.250.124
RootCause   struct
Message     unable to create new native thread
StackTrace          java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:597) at com.sun.jndi.ldap.Connection.<init>(Connection.java:208) at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:112) at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2504) at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:263) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:76) at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667) at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288) at javax.naming.InitialContext.init(InitialContext.java:223) at javax.naming.InitialContext.<init>(InitialContext.java:197) at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82) at coldfusion.tagext.net.LdapTag.do_ActionQuery(LdapTag.java:839) at coldfusion.tagext.net.LdapTag.doStartTag(LdapTag.java:616) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfadfunctions2ecfm1473603830$funcADLOOKUPUSERNAME.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:122) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfadfunctions2ecfm1473603830$funcADLOOKUPMULTIPLEUSERNAMES.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:54) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfdsp_managedlists2ecfm55598920.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\dsp_managedlists.cfm:232) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_switch2ecfm2121232114.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\fbx_switch.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_fusebox30_cf502ecfm1180471387._factor4(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:241) at cffbx_fusebox30_cf502ecfm1180471387._factor5(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at cffbx_fusebox30_cf502ecfm1180471387.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfindex2ecfm749274359.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\index.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:273) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I could really use some help figuring this out. We are getting random errors a few times a day and usually in places where we are using CFLDAP.
Thanks,
David

Absolutely unbelievable that this has been going on for 4 YEARS and there are still NO definitive answers from Adobe!!
There's no definite answer from Adobe, because there's no definitive single question. These errors come up because - for any number of possible reasons - the JVM becomes overloaded. And it's almost always down to an issue with the application code being run, and nothing to do with CF, per-se. So what's Adobe supposed to do? Come and fix your application for you? There are plenty of diagnostic tools out there - some built into CF itself - which you could use to sort the problem out. Or you could hire someone like Mike Brunt to come and have a look at your set up. All it takes to fix these things is to actually do something about fixing it, rather than slamming one's fist on the desk saying "why doesn't Adobe do something!"
I thought - and my knowledge in the area isn't expansive - the inability to allocate threads was down to the app being choked up: threads are a finite commodity, and if requests are queuing up faster than the JVM can clear them, you're gonna get errors eventually. What causes this sort of thing? More traffic than the server can process. This could be because of server kit, or it could be due to code that doesn't scale to the requirement. Usually the latter. Basically one cannot polish a turd.
I have a 24x7 production server that services 180,000 clients in 300 countries around the clock that cannot afford to be down for more than a few minutes at a time.
I'm running Windows 2008 32-bit with 4GB of RAM because I have some graphics software that cannot tolerate a 64-bit OS. Everything has been running fine for the past few months, but now it's starting to crash more and more frequently. I have CF 8.0.1.195765 and Java 1.6.0_04
How many concurrent requests for 180000 clients generate? The number of clients matters less than how heavily the site is used. But, to be honest, I get the impression the implication is "it's a busy site", in which case I think your hardware is a bit on the lean side. Also, if it's a mission-critical app, running it on a single server is probably ill-advised, just from a fault-tolerance perspective even before one starts thinking about performance.
If I was in your situation, I'd consider the following options:
* upgrade your JVM to the most recent version (1.6.0_21?)
* put more RAM in the box, and run a second CF instance on it.
* get another box.
* refactor the environment so the graphics software runs on a different box, upgrading the CF server to 64-bit (again, with more RAM)
* run some diagnostics on the server, seeing what's taking up threads and where any bottlenecks might be
* get an expert in to do the analysis side of things.
* stop expecting Adode to fix "something".
One of my other symptoms I have noticed is that any work done using RDP starts getting really really bogged down. Opening Windows Explorer and searching for files can take minutes. Restarting the CF service will sometimes fail to complete, and you have to wait a few minutes before the manual Start option appears in the dropdown. Maybe coincidentally, the Performance Monitor will fail to add any of the ColdFusion metrics, for example Running Requests and Queued Requests, and the Event Monitor shows an error relating to an 8-byte boundary not being maintained.
You don't, by any chance, store your client variables in the registry do you? The only time I've seen this happen is when the CF box is munging the OS environment, and the only way I can think this could happen if it was clogging the registry. Never store client variables in the registry.
Adam

I am unable to create new folders 10.8.6

Today I am unable to create new folders on my internal drive. I changed all the permissions for the applications with "get info" and unlocking plus selecting read and write for all three categories of users. My home office is shut down.
HELP!

reset home folder permissions
1. Boot OS X Recovery by restarting the computer while holding the Command (⌘) and R keys.
2. When the Repair Utilities screen appears, select Utilities from the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and press Return.
4. The password reset utility window will appear. Do not select a new password.
Instead, click on the icon for your Mac's hard disk at the top. From the dropdown below it, select the user account with the problem.
5. At the bottom of the window, you will see Reset Home Directory Permissions and ACLs. Click the Reset button. Repeat for each User account with the problem.
The reset process may take a couple of minutes. When it finishes quit the programs and restart your Mac.
Depending on exactly what you did to your Mac's permissions the above may not help. If it does not, read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

How to creat new window?

Hello, got a question, is it possible to creat new window in nokia lumia 800 (check the pic what i mean).
Solved!
Go to Solution.
Attachments:
nokia-lumia-800-2.jpg ‏33 KB

Unfortunately no.

Unable to create new events in iCal

I updated my iPhone 4 to iOS7, and now when I try to create a new event in iCal, nothing happens. I am able to tap the "+" and enter the event information, but when I tap "Done", no new event appears in the calendar.
If I, instead, create the event in the Calendar on my PC, the phone syncs with Outlook, and the event appears on the phone's iCal app.
Why am I suddenly unable to create new events on my phone in iOS7, and how can I fix this issue?

Thanks! I've noticed the phone has been a bit "clunky" since the update too. Did you experience the same thing & did the hard restart help?

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is:

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is: "Error creating EntityBean: Io exception: The Network Adapter could not establish the connection".
while executing JSP:<%
* add.jsp
* Adds a new entry through EmployeeBean. This is a JSP that serves 2
* functions. First of all, when called with no arguments, it will display a
* table with a few input fields. The user should enter empNo, empName and
* salary of the new record to be added. When she submits this
* information, it is sent to this page again. If it is successful, then the
* user can continue adding new entries. If it is not, then the old data will
* be displayed, and a warning message will be shown to her.
%>
<%@ page import="com.webstore.*,java.io.*,java.util.*,javax.naming.*" %>
<%
// Make sure this page will not be cached by the browser
response.addHeader("Pragma", "no-cache");
response.addHeader("Cache-Control", "no-store");
// We will send error messages to System.err, for verbosity. In a real
// application you will probably not want this.
PrintStream errorStream = System.err;
// If we find any fatal error, we will store it in this variable.
String error = null;
// In a moment we will check if all columns were passed to this page
String param_1 = "";
String param_2 = "";
String param_3 = "";
long dptNo = 0;
String dptName = null;
// This variable indicates what function of this page is currently used. If
// this page is called with parameters, then a new entry should be
// added. In that case this variable is true.
boolean submitting = false;
// We will first attempt to get the reference to EmployeeHome from the
// session. The "list.jsp" page sets this attribute in the session.
DepartmentHome home = (DepartmentHome) session.getAttribute("DepartmentHome");
if (home == null) {
error = "No previous connection to DepartmentBean.";
} else {
// Attempt to get all 3 parameters from the session
param_1 = request.getParameter("DPTNO");
param_2 = request.getParameter("DPTNAME");
// If all 3 parameters are specified, then this is probably a submission by
// this very page. Note that if the user left one of the fields blank, then
// the corresponding parameter will be "", not null.
if (param_1 != null && param_2 != null) {
param_1 = param_1.trim();
param_2 = param_2.trim();
submitting = true;
// In the following variable we will store a (non-fatal) warning message. This
// message will be displayed in the page, but so will the submission form.
String warning = null;
if (submitting) {
warning = "";
// If there is an empty param_1, param_2 and/or param_3, then this will be noted
// in the warning message.
if ("".equals(param_1)) {
warning = "Null param_1 specified. ";
if ("".equals(param_2)) {
warning += "Null param_2 specified. ";
// If we don't have a warning message yet, then we will attempt to create
// a new record.
if ("".equals(warning)) {
try {
dptNo = (long)Long.parseLong(param_1);
dptName = new String(param_2);
Department rec = (Department) home.create(dptNo);
rec.setDptname(dptName);
// empty columns after insert for effect
param_1 = "";
param_2 = "";
// If we got this far, then there was no problem detected.
warning = null;
} catch (Exception e) {
// Set the warning variable to indicate a problem.
warning = "Unable to create new entry, caught: \"" +
e.getClass().getName() + "\", message is: \"" +
e.getMessage() + "\".";
// Decide what the title will be.
String title;
if (error != null) {
title = "Error";
} else {
title = "com.webstore | Add entry";
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
<HTML>
<HEAD>
<TITLE><%= title %></TITLE>
</HEAD>
<BODY bgcolor="#FFFFFF">
<H1><%= title %></H1>
<%
// If there was a fatal error, then display the error message
if (error != null) {
%>
<P><BLOCKQUOTE><%= error %></BLOCKQUOTE>
<%
// Otherwise display a table with fields to be filled in.
} else {
// If there was a warning, then display it.
if (warning != null) {
%>
<TABLE border="1" bgcolor="#FF2222">
<TR><TD><FONT color="#FFFFFF"><STRONG>Warning: <%= warning %></STRONG></FONT></TD></TR>
</TABLE>
<%
} /* if */
// Display the table with fields. There are two columns. The left column
// contains the names of the fields, while the right column contains the
// fields.
%>
<FORM action="dptadd.jsp" method="GET">
<P><TABLE border="1">
<TR>
<TD><STRONG>DptNo:</STRONG></TD>
<TD><INPUT type="text" name="DPTNO" value="<%= param_1 %>"></INPUT></TD>
</TR>
<TR>
<TD><STRONG>DptName:</STRONG></TD>
<TD><INPUT type="text" name="DPTNAME" value="<%= param_2 %>"></INPUT></TD>
</TR>
<TR>
<TD colspan="3" align="center"><INPUT type="submit" value="Add this entry"></INPUT></TD>
</TR>
</TABLE>
</FORM>
<%
} /* else */
%>
<P><TABLE border="1">
<TR><TD>Back to list</TD></TR>
</TABLE>
</BODY>
</HTML>
Please guide me..

Rajive,
This is the same problem as in your other post:
sql is running very slow
So please refer to my answer there.
Good Luck,
Avi.

Runtime error and unable to create new web application

Hi
when i create new web application i faced this error Runtime error and unable to create new web application.
in this farm we have
2 wfe servers
2 application servers.
adil

Adil,
There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
You can refer few similar threads here -
Link
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

Hi,
We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
When this interface runs, most of the files will be delivered but some of the messages will be errored out.
The receiver channel has shown the following error-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
Can someone suggest what might be the cause for this error.
Thanks in advance.

Hi ,
As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
1.perform Full CPA cache refresh using PIDIRUSER
2.The problem seems to be in establishing the connection with the File server . This could be due to
a. Wrong user name or password in receiver adapter .
b. Firewall connection are not open
actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
3. Finally please check the errorneous communication channel .
to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
4.Please check your maximal connection pool .
Regards,
Saurabh

File Adapter - FTP - Unable to Create new pooled resource

Hi Friends,
I am getting the following error while using file adapter with FTP protocol...
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed.
Can someone help me to solve this probelm..
Regards,
Shyam.

Hi,
Try to check the directory you have specified in the CC and also check whether you are able to connect to the FTP server with those login credential and access the directory specified.
Also let me know whether it is working fine for other scenario's or not.
Regards,
Nithiyanandam

Windows Live for the N73

Hi,
I Know ur supposed to be able to download this in the download area on my phone but for some reason it doesnt appear on there! ive rereshed the page and nothing, i have the Version 4 software on the phone, im just not sure what to do, can i download it on a p.c and then send it to my phone using the p.c software?

http://www.symbianv3.com/new-windows-live-messenger-perfect
Download it here, read instructions at top of page and install with application installer.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Unable to create new windows live id......the mess...

Similar Messages

Maybe you are looking for