Unable to create page in a project

Hi,
I am designing a new search page page on a table FWK_TBX_EMPLOYEES(Later on I will extend it to include record addition functionality).I Have defined simple EO and VO on FWK_TBX_EMPLOYEES table and have also defined an Application Module.Now when I am going to add Page to the project(Under OA Components and Web Tier),Page option is grayed and so I cannot add a new page.Can you please guide where I am going wrong.I have just started learning OA framework.
Regards

Hi,
There may be two reasons for it.
1. Your Project is not OA Project
2. You may be clicking somewhere else other than Project, rightclick on your project and then select New>webTier>OACOmponents>page
Please check 2nd option first.
Regards,
Reetesh Sharma

Similar Messages

  • Unable to create Invoice against a Project based Purchase Order

    Hi,
    We have a scenario, wherein there is Purchase Order created against a NETWORK ACTIVITY of a PROJECT. We have created a Invoice with ref to this PO. Now we want to cancel this Invoice by creating the Credit Memo against this PO. But, while trying to create the Credit Memo, we end with the following error message:
    "Budget for WBS element XXXX/12:7777-XX-X1-Y1-Z1 was exceeded by XXXX EUR in document item 003 Ntwk actvty XXXXXXXXXXXX 00110.
    Hence unable to create the Credit Memo. Desperately looking for your response to solved this.............
    Rgds,

    Hi,
    Check the cost as on today for ur project under project itself using CJ20n & then go to CJ30 and check the Budget for ur WBS
    regds,
    CB

  • Unable to Create Page... (at least today)

    I have been attempting (on and off over the past few hours) to create a new course page using Create Page... From template "Default Course". Each attempt is met with the message "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later." This would be the 21st course in this section, so I'm assuming our site setup is fundamentally sound, but I also know what happens when one "assumes".
    If anyone can provide some insight into this issue, I would appreciate it.

    Duncan;
    Thanks for the response. The link for our TN Department of Education site is attached. I tried the process just before posting this message. The same problem is still present. Any help would be appreciated.
    https://deimos.apple.com/WebObjects/Core.woa/SignIn/tbr.k12.edu

  • Unable to create a hyperlink to a YouTube page

    I'm unable to create a working hyperlink to a YouTube page. I have permission to link to the content. What might be the issue here?

    How are you trying to add the link? The method I prefer is to go to the Youtube page and get the Embed code and put that in an html snippet as shown on this demo page: Adding YouTube & Vimeo Videos.
    OT

  • Unable to create a Site Content in Web Page Composer

    Hi All,
    I am new to WPC and would like to explore more on the same. I tried following some blogs inorder to create and publish Web Pages.
    I was stuck at a point where we need to create a site content. I guess all the permissions required to access each folder is properly set.
    When I tried to create a content like for example an article... A window pops up which says please select a document type and I dont have any option to select whereas I have a cancel and next button at the bottom of the screen. When I click next nothing happens.
    Did anyone went through this issue? What am I doing wrong? Did I fail to set some role to the author creating content?? Author has wpc_editor_role though.
    Regards,
    Rekha Malavathu

    Hi Sandeep,
    The popup window (which I suppose is an XML Editor) doesnt have any UI Element to select when I try to create any content... may it be an Article, Linklist, etc...
    I am using WAS 2004S SP 14. As I mentioned, all the xml and xsl files are available in the folder and even in the KM Configuration.
    My problem is, I am unable to create a content as the popup window is blank... No UI Element to select or enter.
    Regards,
    Rekha Malavathu

  • Unable to create the HL7Library Project in CM

    hi,
    i am trying to convert a pdf doc into xml and then deploy it on XI server.
    for which i created the parser project and got it executed succesfully.Now i am trying to create a HL7 library project,so that i can deploy both parser and HL7  library project on to XI server.
    the problem is iam unable to find the drop down list of libraries while trying to create HL7 library project.
    Kindly help me in this regard...
    Regards
    Madhu

    Hi
    Try this. Log into the Workspace using weblogic user. Go to the Administration option (up and right if I'm not wrong) and check if the roles that you create for the process has the users correctly assigned.
    Regards,
    isabelbernely

  • Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

    Hi All,
    I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
    "Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
    It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
    Anybody has an idea about this error? Please help, thank you very much.
    The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
    The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
    Eric

    HI Eric,
    I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
    SO you can check below mentioned things
    1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
    2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
    again all thing mentioned above is assumption.
    YOu can use debugdiag tool to see if memory leak is happening
    http://www.microsoft.com/en-in/download/details.aspx?id=26798

  • Unable to create Material CR , cannot display the page , dump in ST22

    Hi Experts,
    We are implementing MDG with EHP6 with following components installed with
    But I am unable to create Material CR  . I am getting the initial page for Create Material but after I hit continue, the next page cannot be displayed .
    It is creating an ST22 dump that the config id 'MDG_BS_MAT_PLANT_LIST_ATS' is having an invalid column 'DISPO_TXT' . But I am unable to find the relevant UIBB for this config id . Any thoughts on this issue and how to resolve it. How can I edit the configuration , I don't see that UIBB .
    I am unable to find the UIBB for config id 'MDG_BS_MAT_PLANT_LIST_ATS'
    I am unable to see the UIBB for MDG_BS_MAT_PLANT_LIST_ATS
    I could see the component configuration for MDG_BS_MAT_PLANT_LIST_ATS

    I found a note 1830324 from SAP  regarding this issue , but it is related to SP08 and we are already in SP09.
    This note is about the List Component (WD ABAP component FPM_LIST_UIBB_ATS). When the List Component is started it reads the columns from the configuration. All columns in the configuration should be part of the field catalog that is defined by the feeder class (feeder class method get_definition, parameter io_field_catalog). Otherwise the column is invalid (this could happen e. g. when a column that has already been configured is later removed from the field catalog). When such a invalid column is detected the List Component should raise an X-message and in the short text the name of the configuration and the name of the invalid column should be mentioned. The solution then would be to remove that invalid column from the configuration.
    Not sure why we are still getting the invalid column issue.

  • ORA-20001: Unable to create query and update page.

    I am using the wizard: Form on a table with report 2 pages. I do not change any of the values when using the wizard (just taking all default values)
    I created over 10 pages successfully already.
    When creating the one page, I received this error on clicking the 'Finish' button
    Error creating query and update.
    Return to Application
    ORA-20001: Unable to create query and update page. ORA-12899: value too large for column "FLOWS_010500"."WWV_FLOW_PAGE_PLUGS"."PLUG_QUERY_COL_ALLIGNMENTS" (actual: 269, maximum: 255)
    Seems like it might be table related since I can continue and create more forms/reports on other tables.
    Any help would be appreciated.

    336554,
    Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
    57434

  • Unable to create login page

    i m trying to create login page for oracle adf (HTML) but while compile the application i am getting below error message
    [01:58:01 PM] ERROR: Unable to create user "oracleadf". Reason: MBean invoke failed: weblogic.management.utils.InvalidParameterException: [Security:090282]password cannot be null
    i m using below reference
    http://www.youtube.com/watch?v=C14FmuhTt8I
    please help me out.

    Hi arun,
    yes i provided but i found one strange this,
    when i entered my password in password then in the confirm password field.
    then confirm password field get frezzed then i click on save button after that both the password field get null automatically.

  • Upgraded to iphoto 11, unable to create projects in iphoto

    Unable to create a calendar, nor any project, in iphoto. Upgraded to iphoto '11, still not able to create a calendar. The options and windows appear, howvever, when I click "OK" or "Create" nothing happens......
    Any ideas for us?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using, 9.1, 9.2, 9.3, 9.4, 9.5?
    what system version are you running?
    what happens when you try to create a calandar or project?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    As a first general fix attempt try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder:
    User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.
    OT

  • Unable to create a page under particular page/node

    Hi,
    I have deployed some contents from some other CQ server to my local. I am not able to create pages under lot of page/ nodes though I have all permission(admin).
    The options for creating a new page are read-only and when i open that page , the page properties are read-only as we see when the page is locked.
    Is there any problem in package creation which i deployed on my local?
    Is the property jcr:isCheckedOut has any relevance here though this value is set to true?
    Thanks in advance.

    The state of a page can be very tenacious and sometimes lingers on despite clearing cache. One thing I do to confirm the new version is not seen because of caching is to open a new incognito window within Chrome. The incognito window does not use any of the state information that already exists in the browser and is a more true reflection of the current state of your content. Be sure to close all of the incognito windows when done. If you have one open somewhere already this trick does not work.
    Deke

  • SP 9 for VS 2013 - unable to create new project

    I've just installed the Service Pack 9 to allow Crystal to work with VS 2013.  I'm on Win 7, running the application as an administrator.  Now when I go to create a new web project, no matter what options I seem to choose I get this error message:
    Microsoft Visual Studio -  The system cannot find the file specified. (Exception from HRESULT: 0x80070002)  Project creation failed.  A solution is created, but a project is not created and I'm not finding a way to work around this.
    Prior to installing the Service Pack, I did not receive this error.
    Thank you for any help you can provide!

    Hi Tony
    First time I see this issue reported.
    I'd start with uninstalling CRVS and then doing a repair on VS 2013. See if you can create a projects now. Umm, rebooting may not hurt either. Then ensure that you are using the install executable, not one of the CR runtimes (MSI, MSM, CLickOnce).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Unable to creat part [error when trying to open a JSP page]

    This just started happending this morning...
    I am getting a dialog box with the following error:
    unable to creat part
    The editor window displays:
    An error has occurred when creating this editor
    Please help

    Hi,
    What OS are you working on?
    Try the following steps and update the license window message:
    * Quit NitroX/Eclipse
    * Launch NitroX
    - On Windows (start > Programs > M7 NitroX>)
    - On Linux (<NitroX-install-folder>/NitroX.sh)
    * goto Help > NitroX License window - send the license status
    In addition, also send the following information to [email protected]
    * Help > About NitroX > Click on Eclipse icon - Version & build id
    * Help > About NitroX > Click on NitroX icon - Version & build id
    * workspace - ..eclipse\workspace\.metadata - .log file
    * <NitroX Install Folder>\NitroX\eclipse\plugins\com.m7.nitrox_2.1.0 - m7.log.0 file
    * <NitroX Install Folder>\NitroX_InstallLog.log
    Thanks,
    M7 Support

  • Unable to create a book in iPhoto

    Hi,
    I am unable to create a book in iphoto.  I have created a number of books before, however, now when I choose a theme and click ‘create’ nothing seems to happen.  When I exit out of iPhoto and load it again, my book appears under the Albums heading, instead of the usual Projects heading.  Then when I click on the book, it just shows a blank screen (if I have created an empty book) or just the photos, rather than the album pages.
    iPhoto '11 (9.2.3), Mac OS X (10.6.8)

    Do the following to your problem library:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
    2 -  select the library you want to add from those in the selection window.
    3 - make sure that in the rebuild window the checkbox  "Scavange orphaned photos" is checked.
    4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    5 - in the next  window name the new library and select the location you want it to be placed. Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.

Maybe you are looking for