Unable to create post script file in framemaker.

          I installed TCS 4.0 licensed suite. Due to some reason I need to delete Adobe PDF from Devices and Printers. Since then I am unable to create post script file using framemaker. I have tried uninstalling and installing TCS 4.0 again, but all in vain. What should I do now?

If you delete critical parts of Acrobat there will be problems. Try doing a REPAIR of Acrobat Pro (from the Programs Control Panel), maybe it can undo the damage.

Similar Messages

  • Creating Post Script File from Word Document

    Hi How to create a Ps File from Word document.. Is there any api to do this ?
    ~Arjun

    (1) It is
    PostScript, not
    Post Script or
    Ps!
    (2) To create PostScript from a Microsoft Word document, you simply open such a document in Microsoft Word and print to a PostScript printer driver instance, but chose the
    Print to file option. Note that since PostScript from drivers is device-dependent, you do need to choose a PostScript printer driver instance very carefully based on a PPD that has few device dependencies.
    - Dov

  • Unable to convert post script file

    keep getting the above message, still unable to print...help!

    Hi welshgold,
    You'll need to provide some additional information:
        - Adobe product and version number
        - Operating system and version number
        - The full text of any error message(s)
        - What you were doing when the problem occurred
        - Screenshots of the problem
        - Computer hardware, such as CPU; GPU; amount of RAM; etc.
    You can though try to remove your printer and re-install or you can try to reset your printer subsystem (this will remove every printer from your computer system).

  • Converting Back to Original PDF Using Post Script File

    Is there any way to convert back to an original PDF using a post srcipt file that was created from that original PDF?  Allow me to fully explain my situation:
    I converted multiple pdf's that I created into a post script file.  I then utilized Adobe Distiller to convert them into a pdf that could be used for better printing and better usability by the end user.  Unfortunately, when Distiller did this conversion, it replaced my original pdf with the new one.  By the time I realized what was happening, all files had been replaced.
    I still have the post script file that was created from the original PDF file; is there any way possible using this post script file that it can be somehow converted back to the original PDF file?  There are some edits that I need to do on the original PDF.  The pdf that Distiller creates doesn't allow for anymore edits.  My goal is to be able to make my edits without having to re-create 37 pages of documents. 
    The software versions I'm using are as follows: Adobe Acrobat X Version 10.1.4, Adobe Distiller Version 10.1.438.
    If anyone has any ideas, please let me know!

    Hello, thank you for responding.
    Yes the url links start with http:
    For example when I type in
    http://canberracontemporaryartspace.wordpress.com/2013/07/06/staying-out-of-trouble/
    in the word document and click on it, the link works; but when I save it as a pdf it says "not found"
    And then when I type in
    http://www.camberwellspecialists.com.au/what-is-skin-cancer.html
    in the word document and click on it, the link works; but when I save it as a pdf it says "page not found"

  • SapScript output spool to a POST script file

    We generate  billing invoice output using custom
    program/Sap script. Subsequently we release the invoice print out from
    the print spool to create a post script file from the print spool by configuring command set "G" in
    transaction u201CSPADu201D. This processis  is working fine in R/3
    However, when we migrated the same functionality to ECC, we are finding
    that the file created containing only garbage data.
    Anyone has encountered this issue and have suggestions to resolve this.
    Thanks
    Palani

    Hi Gary
    How the issue is resolved, please let me know. Since i am also facing same issue.
    Thanks
    M G Shankar

  • Why the error "unable to create unique temporary file" ?

    Hi,
    I've created a very simple zone on s10_69. The global zone is a default Solaris install, nothing added. When installing the local zones I get theses error messages:
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/100dpi/fonts.dirMMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.dirNMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dirOMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/misc/fonts.dirPMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirSMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirUMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigjha4tm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/sfw/lib/mozilla/.pkg_update_stampepaybn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.dirgOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dirhOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/Type1/fonts.diriOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/misc/fonts.dirjOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/misc/fonts.alias.alllOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirfGaWoo>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirhGaWoo>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigL2aqZo>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirgPaW7o>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirhPaW7o>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/xil/config1Faipp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/xil/config2_aWtp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirEhaywp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirGhaywp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirsVaqAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.diruVaqAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/bin/wscompilejbaWAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/bin/wsdeploykbaWAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3/fonts.dirioaqBp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigLYaaCp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dir10a4Dp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirZAaOEp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dir1AaOEp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirhUaqFp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirjUaqFp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirDNaGGp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirFNaGGp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.diryVaGLp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirAVaGLp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirdtaGMp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirftaGMp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/100dpi/fonts.dirgZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.dirhZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3/fonts.diriZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/Speedo/fonts.dirjZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.alias.alllZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3/fonts.alias.allmZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirlqaGLq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirnqaGLq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/asadminsTaGNq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/startcommander.shbHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/startconsole.shcHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/startserver.shdHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/stopserver.sheHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigt2aGYq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/appclienta2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/asantb2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/capture-schemac2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/deploytoold2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/jspce2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/package-appclientf2aOyr>and more like these.
    Any ideas why ?
    The files are all there after installation, without the temporary names. So it doesn't seem to be a big problem...
    Thanks,
    Vlad.

    I don't have the bug number handy but I'm quite certain this was
    resolved in one of the post-s10_69 builds. Please download the
    official Solaris 10 initial release and by all means, let us know if you
    continue to see this issue during zone installation.

  • How to Print Post Script Files

    Hi All,
    I am trying to make a utility software in foxpro that could print post script file on:-
    1) Post script printer
    2) Non Post Script printer
    Operating System Windows 95 & above
    Help is requested from all the community members
    Reagards
    Harsh

    PostScript printer - send it to the printer port e.g. LPT1: with a simple copy.
    Non-PostScript printer - you'll need to buy a PostScript RIP, or perhaps use Acrobat Distiller to convert the PostScript to PDF, then print the PDF with Acrobat's API - see the Acrobat SDK. (This is not possible with the free Reader).

  • REP-0118 Unable to create a temporary file in "Windows 7 "

    We are using Report Builder Version 6.0.8.24.0 and Windows7 32 bit operating system, here
    While Running a Report through form i am getting this below
    error.
    REP-0118 Unable to create a temporary file*
    But while running the same report in a windows 98 or windowsXp PC
    i dont get this error.
    What might be the problem.
    pls advice the solution....
    thanks in Advance...
    Stalin...

    try this..
    REP-118: Unable to create a temporary file.
    Case 1: The environment variable that determines in what directory to create temporary files is set to an invalid directory.
    Case 2: There is not enough free space on the disk to create the temporary file.
    Case 3: A temporary file that cannot be modified already exist
    In regedit under branch hkey_local_machine/software/oracle/<oracle home> 
    I have changed the variable REPORTS_TMP. I changed the value for this to c:\reports_tmp
    or you can use something like this where you want Oracle reports to create temp files. Hope this helps

  • Unable to create temporary backing file

    My program is throwing out the error:
    temporary open: /var/tmp/BDB20825: Too many open files
    unable to create temporary backing file
    This happens after my program has been running for about 4 hours. The program appears to run out of file descriptors. The listing of /proc/<PID>/fd shows hundreds of lines naming the same file (/var/tmp/BDB20825), like this:
    lrwx------ 1 zobell users 64 Jul 28 14:41 622 -> /var/tmp/BDB20825 (deleted)
    That file does not exist. I suspect that someone is deleting but failing to close the file. A few open file descriptors with this deleted file occur slowly in the early hours, but not at a fast enough rate to bring the program down when it does. It looks like there is a sudden flood at the end.
    The program repeats this error slowly, and is stuck inside the db code. Here is the gdb backtrace I am seeing every time I interrupt:
    (gdb) where
    #0 0x00e74410 in __kernel_vsyscall ()
    #1 0x003d51dd in ___newselect_nocancel () from /lib/libc.so.6
    #2 0x002e5d39 in __os_sleep () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #3 0x002e43f1 in __os_openhandle () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #4 0x002e52ad in __os_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #5 0x002c0357 in __db_tmp_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #6 0x002c006c in __db_appname () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #7 0x002d50c9 in __memp_bhwrite () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #8 0x002d4a27 in __memp_alloc () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #9 0x002d62ec in __memp_fget () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #10 0x00232003 in __bam_new_file () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #11 0x002abc79 in __db_new_file () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #12 0x002abaff in __db_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #13 0x002a5d15 in __db_open_pp () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
    #14 0x0080644c in Db::open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb_cxx-4.6.so
    #15 0x0053ebbe in DbXml::DbWrapper::open (this=0x405bbee0, txn=0x0, type=DB_BTREE, flags=65537, mode=0) at Transaction.hpp:62
    #16 0x00549247 in CacheDatabase (this=0x405bbed8, env=0x9c5a848, type=DB_BTREE, compare=0) at CacheDatabase.cpp:28
    #17 0x005497e2 in DocDatabase (this=0x405bbed8, env=0x9c5a848, compare=0) at CacheDatabase.cpp:46
    #18 0x00584ced in DbXml::Manager::createDocDatabase (this=0x9c5a830, compare=0) at Manager.cpp:694
    #19 0x00519467 in DbXml::CacheDatabaseMinderImpl::verify (this=0xfffffdfe, entry=@0x6ac2f790, cid=-514) at CacheDatabaseMinder.hpp:31
    #20 0x00519398 in DbXml::CacheDatabaseMinderImpl::findOrAllocate (this=0x6ac5b4f0, cid=1, allocate=true) at CacheDatabaseMinder.cpp:71
    #21 0x00518e59 in DbXml::CacheDatabaseMinder::findOrAllocate (this=0x6acd9fa0, mgr=@0x9c5a830, cid=1, allocate=true) at CacheDatabaseMinder.cpp:21
    #22 0x0055b12d in LazyDIResults (this=0x6acd9f98, context=0x6acd9fa0, contextItem=0x4979abc0, expr=@0x9ce5de8, txn=0x0, flags=0) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlManager.hpp:80
    #23 0x0052f9cd in DbXml::QueryExpression::execute (this=0x9ce5de8, txn=0x0, contextItem=0x4979abc0, context=@0xbfcb0e04, flags=0) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlQueryContext.hpp:86
    #24 0x00565a3a in DbXml::XmlQueryExpression::execute (this=0x0, contextItem=@0xfffffdfe, context=@0xbfcb0e04, flags=4294966782) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlValue.hpp:186
    #25 0x0805af4b in XmlRecordWithCounts::ExtractQueryString (this=0xbfcb0dd0, select=@0xbfcb0e2c, result=@0xbfcac1d0, qDocument=0xbfcb0e14) at src/XmlRecordWithCounts.cpp:401
    #26 0x080585f6 in OdRecord::GetRequiredContent (this=0xbfcb0dd0, name=@0xbfcac1e0, origin=@0xbfcac1d0, dest=@0xbfcac1c0, type=@0xbfcac1b0, dist=@0xbfcac198, totalCount=@0xbfcac194, route=@0xbfcac1a0, qDocument=0x0) at src/OdRecord.cpp:143
    #27 0x0804d9c3 in ProcessOd (fpPrivate=0x8e11098, odDb=@0xbfcb0dd0, fdDb=@0xbfcb0d20) at src/BuildFdDb.cpp:263
    #28 0x0804f4c8 in ProcessOneDest (fpPrivate=0x8e11098, odDb=@0xbfcb0dd0, fdDb=@0xbfcb0d20, dest={static npos = 4294967295, _M_dataplus = {<std::allocator<char>> = {<No data fields>}, Mp = 0x9da758c "LAX"}, static Sempty_rep_storage = {0, 0, 69041, 0}}) at src/BuildFdDb.cpp:464
    #29 0x080501cd in main (argc=6, argv=0xbfcb10c4) at src/BuildFdDb.cpp:589
    At this time, the program is trying to extract fields out of an XmlDocument that is the result of a query. The program uses a pre-calculated XmlQueryExpression to extract a specific field. This may not be the best way to extract a field from a document, given the apparent overhead of needing a temporary file!
    My program queries two database files (OD.dbxml and FD.dbxml.new), and uses the information to add records to the second file. The databases are rather big:
    bash-3.2$ ls -l /tmp/*dbxml*
    -rw-rw---- 1 zobell users 5233745920 Jul 28 14:42 /tmp/FD.dbxml.new
    -rw-rw---- 1 zobell users 6539427840 Jul 13 10:16 /tmp/OD.dbxml
    (I keep them in /tmp because everywhere else uses NFS and performance is awful with NFS.)
    My environment:
    Red Hat Enterprise Linux Client release 5.3 (Tikanga) 32 bit.
    Berkeley DB XML 2.4.16, C++ interface.
    Disk space should not be an issue:
    bash-3.2$ df /tmp /var
    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/mapper/VolGroup00-tmp
    28948572 13044384 14409968 48% /tmp
    /dev/mapper/VolGroup00-root
    144742920 5333544 131938272 4% /
    I ran this program about a year ago and did not see this issue. I have made a few changes and linked to the newer version of the XML database since then. Any help is appreciated.

    I have more information about this problem.
    If I "disable" the routine __os_zerofill() in os_fzero.c, by having it always return (0), I no longer get an exception and my application appears to run smoothly. However, I have not determined what in this routine leads to the exception. And, I have no idea what the short and long term consequences of "disabling" this routine will be....
    -Coralie

  • CELL-01528: Unable to create the log file in directory

    Hi ,
    We have Qtr-Exadata
    I'm getting error msg in 2 of Storage Servers when trying access cellcli
    CELL-01528: Unable to create the log file in directory
                             /opt/oracle/cell11.2.2.3.2_LINUX.X64_110520/cellsrv/deploy/log.
    Error: Couldn't get lock for
                             /opt/oracle/cell11.2.2.3.2_LINUX.X64_110520/cellsrv/deploy/log/cellcli.lst.
    in that directory there are too many files [cellcli.lst.0.lck...............cellcli.lst.0.99.lck]
    whereas in the third stg-server which run smoothly there are three files [cellcli.lst.0,cellcli.lst.0.1,cellcli.lst.0.2]
    without any file with "lck" extension
      ( Sorry for bad English)
    BR
    Sami

    Hello, check directory permissions

  • I am getting some errors while distilling the post script file.

    I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
    <PDFX ISO="15930-1:2001" COMPLIANT="true">
    PDF/X Compliance Report
    1.  Summary
       Warnings: The total found in this document was 0.
       Violations: The total found in this document was 0.
       No problems were found in the document.
       This document passes PDF/X-1a:2001 compliance checks.
    </PDFX>
    Regards,
    Jack

    @Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
    What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
    To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
    Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
    Uwe

  • How can I rip a 10" x 10" post script file from InDesign 6, it keeps telling me "the active document

    How can I rip a 10" x 10" post script file from InDesign 6, it keeps telling me "the active document uses multiple pages sizes and won't print.  My page sizes are all 10" x 10"

    Please post in the InDesign forums here http://forums.adobe.com/community/indesign/indesign_general. They will be able to help you.

  • Reading post script files

    Does Adobe offer a program that reads post script files?

    Adobe Acrobat can convert Postscript to PDF and display the PDF.

  • Exctract data from Post Script file

    Hi all;
    I need to extract, manipulate some data from post script file send them to database.
    How can i do that process?

    OT: Hey Rene, I see you've become a local celebrity
    around here!I'm still waiting for the groupies to show up, though. No luck so far. :p
    I think it's a nice initiative and
    enjoyed reading the interview.
    ; )Thanks. :)

  • ORA-09925: Unable to create audit trail file

    hi
    everyone,
    I met a problem when I ran 'rman' to backup database . It said that,
    "unable to create audit trail file"
    what cause this problem ,somebody told me that the privilege is not proper .
    I am confused ....
    anybody can help me ?
    many thanks.
    best
    carl

    Privilege may not be appropriate or the volume where the audit log resides may be full.

Maybe you are looking for

  • My Imac has black and white vertical lines

    Riddle me this Apple... A few months ago, my 2008 Aluminium 24inch Imac locked up and exhibited space invader style pixels all over the screen. After rebooting, it was fine for a while and then it would freeze again and I'd get the same Atari style p

  • Enabling firewire out from Color?

    Has anyone attempted to edit the file in color where it says video output disabled? I truly believe that Silicon Color the originator of Color intended for firewire out to be enabled, is it possible the apple made a deal with the AJA Kona and the Bla

  • Which color is the BEST for iPhone 5 ?

    White or Black ? Gonna buy my iPhone 5 sson ...really confused to go for white or black ?

  • Fax Problems

    Hi I am experiencing Fax problems in my Cisco Voice network.There are about different problems for each fax machine. All the fax machines are the same model. 1. Faxes unable to send out to external lines Faxes call an outside line, when the remote fa

  • Help with linking files

    I have several projects with 1000's of little clips in them- that have become unlinked- normally I can just use link media and that resolves it, but it seems like there has been either name changes to them (numbering in project panel seems different)