Unable to create recovery disks

Hi,i just purchased a HP Probook 4320s and i would like to create a recovery disk set as soon as possible so if i need to go back to factory settings i can do,however when i followed the instructions to do so on this site it says go to start>all programs> recovery manager. But when i go to start>all programs there is no recovery manager to be found.I did a search for it and system restore comes up with the option to reformat to factory settings but no option to burn a set of recovery disks.Am i looking in the wrong place or could it be under a different heading? I have a Probook 4320s.please help.Thanks

Hi,
Please read the 1st post by Paul_Tikkanen in This Thread as I believe it also applies in your case.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Unable to create recovery disk using media creation on hp pavilion g6 2236tx

    i am attempting to make recovery disk of my notebook through hp media creation i am using DVD disks for the same but the problem is that when the processing bar reaches almost 99percent it shows error message that unable to create recovery disk try again later!
    please help!

    Hi saksham_jain,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you tried to create your recovery DVDs using HP Media Creation and it failed. Here is  a document to assist you with creating the recovery DVDS. Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7). 
    If this should fail for any reason, please provide the error and any other details.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Unable to create recovery disk

    I have Leovo G530 35U 3000 series laptop. When I tried to create recovery disk by clicking "Create Product Recovery media" , a new window for creation appear. But the check box for "product recovey disk you are going to creae are for this conmuer use only" and ok button get diactivated.
    Is there ny other option to create prouct recovery disk?
    Can anyone help me?

    Hi saksham_jain,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you tried to create your recovery DVDs using HP Media Creation and it failed. Here is  a document to assist you with creating the recovery DVDS. Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7). 
    If this should fail for any reason, please provide the error and any other details.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • T440s - Unable to create recovery disk

    I just got my Thinkpad T440s, my first Thinkpad and I really love the machine! I've been having this issue though which has been spoiling my enjoyment of the device: I can't make the recovery disks. I tried following the instructions here http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024 but I always get this error: https://skydrive.live.com/redir?resid=5DCF305C859982FB!709&authkey=!ANxAZ-i4hSnedBA&v=3&ithint=photo... . On the previous page I can't check the box for copying the recovery partition. In the Disk Management snap-in (diskmgmt.msc) I can see that the recovery partition is there, so I'm not sure what the problem is.
    I would really like to get the recovery media created, as I can't risk starting to use this machine without recovery media since there is no DVD drive. I would appreciate any help in this matter. Thanks!

    Hi ibrahima,
    What kind of media do you try to do your recovery on?
     usb flash drive might be 16GB minimum.
    Otherwise you should try to restore your laptop to factory defaults and try again.
    Vince.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Unable to make recovery disk on in pavellion g62016 .dat file is missing in recovery drive

    unable to make recovery disk on in pavellion g62016 .dat file is missing in recovery drive
    can i use the .dat file of another same notebook
    what is significance of ,dat file

    Hello shail11. I understand that you're having some problems creating a recovery disc. Is this correct?
    You can not use another .dat file.  The recovery media is specific to a certain notebook, so using another computer's files will not work.   If you're running into issues making a recovery media you could attempt to perform the recovery from the BIOS. Here is a document which outlines the process.  ALL data not backed up before performing the recovery will be lost.
    Let me know if this helps; have a great weekend!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Cannot create recovery disk after update to Win 8.1 on G580

    Friends
    I have a Lenovo G580 that came with Win 8.0 preinstalled. I upgraded it to Win 8.1 over the Internet.
    When I try to run the "Create recovery disk" I get the error that states that "We cannot create a recovery drive for this PC. Some required files are missing..."
    I found out that the winre.wim file that is supposed to be in the C:\Windows\System32\Recovery folder is not there. I cannot locate it anywhere on the C or D drives either. I believe there is a copy on one or more of the recovery partitions but I do not know how to get that file from those partitons.
    I am confused as to why there are seven partitions on that one drive:
    1 Recovery partition 1000 MB
    2 EFI system partition 260 MB
    3 OEM partition 1000 MB
    4. Recovery partition 350 MB
    5. Recovery partition 20 GB
    6. Lenovo D: 25 GB
    7. Windows 8 C: 250 GB
    Can someone help me and give me some instructions on how I can fix the system to find the winre.wim file?
    Thanks for any good input.
    Calle

    Hi Calle,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the error message is displayed in your G580 Laptop, as the OS (Operating System) installed is Windows 8.1 or Windows 8. Recovery discs cannot be created only a “Recovery Media” can be created using USB Flash drive, below is the link to create USB recovery drive.
    Create a USB Recovery Drive
    Do post us back if the issue persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HP Pavilion dv6 Notebook PC unable to boot recovery disk

    HP Pavilion dv6 Notebook PC unable to boot recovery disk.  First when I power on my notebook it goes straight to the launch recovery or launch Windows normally screen.  When I choose start windows normally, it goes to the window screen and freeze.  When I try to launch the start-up with windows 7 start-up disk, the computer will not load the files.  When I tried to complete a hard drive test, it failed with a failure ID 9UXNXA-55E65V-XD003G-60XR03.  
    I'm looking for a solution, can someone help?

    Hi:
    It sounds like you need to purchase a new hard drive for your notebook, and reinstall the operating system with your recovery disks.
    When a HDD fails a diagnostic test, it normally means it is done for.
    Paul

  • How to create recovery disks for Lenovo H530s with WIndows 8.1

    Hello there,
    I just purchased a Lenovo Hf30s type 10131 with Windows 8.1, mini tower: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
    I like to create recovery disks, but  the already installed program OneKey Recovery does not have the option of recovery disks, it allows only larger media such as USB stick and hard disks.
    Here to I have 2 questions:
    1. Is there a way to create a recovery disks that will create the original factory settings with 5 partitions?
    2. Does any one knows if the recovery siskd sold by Lenovo (for Netherlands they cost between 23 and 38 Euro) would do the job by creating the factory settings with 5 partitions?
    My goal is to reformat the hard disk and aprtitionig it the way I need it, but in case of anything, I would like to be able to go back to the original facttory state of the unit, especially if I have a harddisk failure and neer to replace the hard didks.
    Thank you in advance and I wish you a very pleasant and successful day.

    Hi Mlenovo,     
    Welcome to the Lenovo Community.                                 
    As per the query we understood that you are looking to create a recovery drive for your Lenovo h530s desktop.
    As you have asked for the recovery disk, please refer to the below link this might help you to create the recovery media
    Click here for the recovery media.
    Hope this helps! Do post us back for further queries.                 
    Best regards,                       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to create recovery disk on HP envy dv6 7258nr notebook pc - window 8

    I m trying to create recovery disk from recovery drive which is created by hp while purchasing the laptop, while taking back up from recovery manager, Recovery Manager says   (Recovery Partition has been removed - Recovery Media creation option is no longer available) , but as per my knowledge i did not took back up of recovery drive. So what should i do to take back up of my recovery drive to **bleep**.

    Based on what you have stated, it appears that you or someone else with access to your notebook deleted the recovery partition. Without the recovery partition on the hard disk you can't make recovery media.
    Your best option at this point would be to purchase a recovery disk set from HP or an HP Partner. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Unable to Create a Disk Image of Device

    Hello.
    The MacIntosh is a Mac Mini w/1.83Ghz Intel Core 2 Duo. The OS is Snow Leopard, 10.6.2. I am unable to create a disk image of the device "Macintosh HD".
    Here's my procedure:
    1) Reboot the Mac Mini from the Snow Leopard Install Disk
    2) Set Language and then load "Disk Utility"
    3) Select the Macintosh HD from Disk Utility
    4) Set "Create a New Image from Macintosh HD"
    5) Leave the settings as they are (type of disk image is "compressed" target repository is root home dir)
    6) Error message is "Unable to create Macintosh HD (error -61)"
    7) When I then try to create a blank disk image, once again, with root home as repository the error message is "Unable to create name.dmg (read-only) file system"
    Any suggestions how to fix?
    Thanks
    Mike

    you can smb from terminal but it will not help you. you'll need to create a folder which will serve as the mount point first and where will you put it? you can not do it on the dvd. and you can not put it in the main drive itself. but why do you need to do it that way at all. there is no need to boot from the DVD period. boot normally and clone your hard drive to a remote disk image on an smb share using one of many backup programs that can do this. Superduper can do it. so can CCCloner.

  • HT4848 Error creating recovery disk in Disk Assist

    I've carefully followed all instruction in this post: http://support.apple.com/kb/ht4848, but I am having an error when creating the recovery disk.
    The recovery Disk Assist starts creating it, but stops early on. The message I get is titled "Conclusion," and it says "The recovery drive wasn't created. There was an error creating recovery disk."
    Can anyone help me with this? I followed all the steps in the post above and I also created the partition on the external drive.
    I really need to wipe out my computer and make it appear "as new" because I am selling it. Any help would be great!
    Thanks!

    Same happened to me.  This makes absolutely no sense, but I just kept trying and trying then it finally worked.  For me, it hasn't been worth the bother.  These restore DVDs don't work like the ones I made for an Acer laptop, for example.  On my Acer, I repartitioned, reformatted my drive and was easily able to restore my computer before I sold it.  I've been going nuts trying to restore my computer after a clean install of Windows 7.  Still can't get it to work.

  • Do user-created recovery disks work with replacement HDD of different capacity?

    The original Seagate 250GB SATA HDD in my Pavilion G60-214EM notebook has completely failed (BIOS and other Windows machines cannot even see it). I replaced it with a Samsung 160GB SATA HDD but Recovery Manager on my user-created (DVD-R) recovery disk consistently fails at 2% of "Reformatting  the Windows partition of your hard disk drive". If I look at the resulting partitions from another machine I see a 10.61 GB NTFS 'RECOVERY' partition, an empty active primary NTFS partition of 37.12 GB and 101.31 GB still unallocated.
    Should the user-created recovery disks work if the replacement disk drive is smaller capacity than the original?
    Should they work with a larger capacity replacement drive?
    If not, can HP provide recovery disks that will work with a different capacity HDD?
    Thanks,
    --A

    Hi, I am the same predicament as you are From my experience thus far, the replacement disk drive space needs to be bigger or equal to the original HD space. (e.g.. I had a 640 gb OEM HD, I cannot install or factory reset the new 500 gb WD HD because it says its too small...)
    As for question 2, I am going to try to get a 1TB hard drive, though I don't know due to the prices and such. Will post back if I do.
    Question 3: I do not know, someone else may be more knowledgeable:/ 
    Hope this helps!

  • Creating Recovery Disks when Windows 7 won't Boot

    My sister's hard drive is in imminent failure on HP G60-535DX Notebook. Windows 7 won't boot. I need to make recovery disks. I have been able to back up info going into System Recovery Manager, but I don't see an option to create recovery disks to install the system on a replacement hard drive. Is it possible to create the disks or order them?
    Thanks,
    Nanila51
    This question was solved.
    View Solution.

    Hi,
    You can order a replacement set of Recovery Discs using the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • G60-535DX Notebook ~ Unable to create Recovery Discs

    I have a HP G60-535DX Notebook, running Windows 7 Home Premium, 64-bit, Service Pack 1.
    I have tried to create recovery discs by going to Recovery Manager and clicking on Recovery Disc Creation. When I get the screen that says Splitting System Image, it never goes beyond 9%, even when I let it run for over an hour.
    Any thoughts or suggestions?
    Thanks.

    Hello JimCon,
    I have read your post on how your notebook computer is not able to successfully create recovery disks, and I would be happy to help you!
    Since your computer gets stuck at 9% for great lengths of time, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    I hope this helps!
    Regards   
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Creating Recovery Disk from another Windows

    Hello everyone, my laptop is HP Pavilion dv6 7040-tx and Product NumberB8N04PA#ACJ. It came with Windows 7 Home Premium which is also, in the recovery partition. I removed Windows 7 Home Premium and installed Windows 7 Ultimate. Now I want to create recovery disks for the Windows 7 Home Premium from the Recovery Partition. But I don't have HP Backup and Recovery Manager installed in Windows 7 Ultimate. Can any one tell me how to do this without doing recovery or removing my current Windows 7 Ultimate installation??

    You must burn the Recovery Disks before installing another OS. You can call HP to order a set.Choose your country here>> Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for

  • How to change the colour of Background in TGA sequence with Alpha

    We are going to be loading an animated name key ,created in Motion, into our clarity system for live broadcast. To do so I need to export the animated name key as a TGA sequence. Unfortunately the background for the produced files are black and leave

  • Can't burn a disc after updating to Yosemite

    I have a 2009 21.5in desktop, and I've never had an issue burning discs of photos, until now. When I insert the discs, they are ejected and I am prompted to insert a blank disc. These ARE blank, I bought the pack 2 days ago. Photos are .jpg format, a

  • "Tab" key doesn't work with e-mail

    Having to change from MSN.com In e-mail with MSN the tab key worked fine. When using Firefox to access my new e-mail accounts on q.com I can no longer use the tab key. Doesn't work. ZIP. Nadda. I often have to send e-mails that have columns of figure

  • No After Effects and Premier

    Hi! Already purchased Adobe Creative Cloud. I opened it on Adobe application manager, there were 14 Applications that were shown, none of them are for video. Adobe After Effects and Premier aren't there.Please Help Thanks, Adrian

  • Crop tool stuck!! Won't accept changes

    I'm processing a batch of proofs and midway through my crop tool no longer accepts the changes by clicking on the crop marker button. Doing so only brings the image up in full resolution, clicking again puts it back in crop mode. I can't get this beh