Unable to create the Distribution cycle with WBS Element as Receiver

Dear SAP Friends,
I am creating the Distribution cycle in KSV1, Sender is Cost center and Receiver is WBS element.
Once i select Receiving tracing factor Tab i am getting the error like :
Message :
No valid receiver entries exist
Message no. GA015
Diagnosis
You have established a group of receivers by entering either intervals or groups in the selection criteria. However, in the master data check, the SAP System cound not find any valid receivers in your selected group.
System Response
The single value entry screen is not shown.
Procedure
Check your entries for the selection criteria. It is possible that the master data is locked. You can get more info be choosing "Error log...".
Please let me know how we need to create the Assesment cycle for WBS elements as receivers and Cost centre as Sender.
Let me know in this Regard ASAP..
Regards,
Anand

We are encountering a simiilar situation related to Cost Center Assessements to a Work Order (Order Category 30) I'm thinking the promble is related to a similar situation that you had with a WBS.
Thanks,
Lou

Similar Messages

Unable to create the sales doc with ref to quotation

Hi,
I am unable to create a sales order with ref to quotation, messege is "Create sales document" not allowed (User Status
MKT, object VB0006000017000000)".
how please advice me
chandu

Dear Chandu,
In Copying Control from QT to OR:
Kindly set the Copying Requirements: 301 for all Item
And Copying Requirements: 501 for all schedule lines and check if the sales order is created now.
Regards,
Ashu

With WBS element unable to create the Shopping cart

Hi,
With WBS element unable to create the Shopping cart
Problem description:
Shiopping cart >Item detail > Account assignment
A/c assignment category " WBS element", Assignment no (some no,eg 1000-2 ).System picks the G/L account and business area,unable to create the shopping cart.Getting error message that
"The account assignment objects are defined for different business areas "
Did i missed anything ,please
Thanks
Hareesha

Hi Hareesha,
As Sreedhar has rightly said the issue is definitely with the correctness of the data.
Check the assignment of WBS to the proper business area which you are using to create the shopping cart.Check your org. structure and attributes and their assignments once again.
Neverthless some OSS notes for your reference if in case you can not able to make P.Os or the SC's / P.Os are not getting transfered to back end R/3.
<b>Note 727897 - WBS element conversion in extended classic scenario</b>
<b>Note 1000184 - Account assignment error when document transfer to back end</b>
Even after validating the data if the problem still persists please explain it clearly with the errors for further help.
Rgds,
Teja

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

Unable to create the type with the name 'ODATA'

On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI development

The next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Ditribution cycle with WBS as sender

Hi Friends,
We have support project cost cost booked on WBS elements , we want to allocate that costs to some cost cost centers.
We created 1 distributiion cycle having the WBS as sender & cost center as the receiver.
but when we run the distribution cycle, the cost is not getting distributed. the sender is not recognized when we run the cycle.
We are having message " Cycle PA01IND002, start date 20100101, does not include any senders."
kindly help.
Thanks & Regards
Bhairavi

HI,
SAPNET note 605281 describes what to do to enable allocation cycles to use WBS-element as a sender, I assume this is correct implemented in your system.
Check the sender master data / transaction data. Follow SAPNET note 64805 (point 4) for detailed analysis of the case (report RKACSHOW).
Best regards, Christian

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

Unable to create the Rule Index (SEM_APIS.CREATE_RULES_INDEX) getting error

Hi,
I am trying to create the Rule Index with the below script its giving the temp table space error.
The number of records in that specific table is 17473708 (17+ M) and the available temp space is 120GB.
Execute SEM_APIS.CREATE_RULEBASE('ecc_md_rb')
--Insert to mdsys.semr_ecc_md_rb Values(.............)
BEGIN
SEM_APIS.CREATE_RULES_INDEX(
'ecc_rule_indx',
SEM_Models('FOUNDATION'),
SEM_Rulebases('RDFS','ecc_dm_rb'));
END;
Create rule index statement is running more than 8hrs and i tried with the sem_apis.create_entailment its also giving the same Temp table space error.
Please find the below error details
BEGIN sem_apis.create_entailment('ecc_rule_inx', sem_models('FOUNDATION'), sem_rulebases('OWLPRIME','ecc_dm_rb'),SEM_APIS.REACH_CLOSURE,'RDFS2-, RDFS3-, RDFS4a-, RDFS4b-, RDFS5-, RDFS6-, RDFS7-, RDFS8-, RDFS9-, RDFS10-, RDFS11-, RDFS12-, RDFS13-','USER_RULES=T'); END;
Error at line 1
ORA-29532: Java call terminated by uncaught Java exception: oracle.jdbc.driver.OracleSQLException: ORA-01652: unable to extend temp segment by 64 in tablespace TEMP
ORA-06512: at "MDSYS.SDO_SEM_INFERENCE";, line 4866
ORA-06512: at "MDSYS.RDF_APIS";, line 16
ORA-06512: at line 1
Please Help me to create rule index.
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.

Hi,
Please use the create_entailment API.
As far as temp tablespace goes, please create a bigfile temp tablespace. You can follow Slide #36 of the
following document.
http://download.oracle.com/otndocs/tech/semantic_web/pdf/2010_ora_semtech_wkshp.pdf
Thanks,
Zhe Wu

Unable to create the bluetooth virtual COM port

Hi all
I install BS from Toshiba and it seems ok. Bt ir desn´t work. I see all the drivers installed, system devices, etc. No Toshiba BT ports can be seen. Local com ports only show modem port. Try to create a virtual port but get a message "unable to create a bluetooh virtual port" I have a satellite m100-145. Can anyone help on this ?
thx

Thx for your suport.
I decide to reinstall windows and all software. Now it works.
The error was due to the fact that if you have BS from Microsoft (called bluetooth monitor) and you install the BS from Toshiba after that, even if you remove the BS from MS, the BS from Tos is unable to create the virtual com ports (except modem).
I try with the latest version of BS and the problem was not solved. So if there is a previous installation of BS fom MS the BS from Tos get the message of "unable to create the bluetooth virtual com port".
Now i fixed reinstalling SO from beginning.

Unable to create the protocol specific B2B message

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
    at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
    at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
    at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
    at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
    at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
    ... 6 more

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
    at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
    at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
    at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
    at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
    at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
    ... 6 more

Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed.

Hello Community
my ULS-logs are flooded with entries like
w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
Best Regards
Michael

Hi Linda
thanks a lot for help.
I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
Right before the strange entry in the logs we are getting these:
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
that's it, unfortunately. These entries are repeating every 15 seconds.
Best Regards
Michael

�Unable to create the virtual machine. The error was -4�

I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
Software used
Windows XP SP2
Visual studio.net 2003 SP1 (the problem also occurred without SP1)
.NET Framework 1.1 SP1
JACE 1.1rc1_05
JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

Unable to create the infotype

Hi SAP Guru,
Greetings for the day,
I had hired a guy with the infotype of 0207,0208,0209,0210 after hiring i try to transfer him using TRANSFER ACTION to another location say from New York to California, which is entirely a different state, where unable to create the 0208,0209,0210 in that i can able to create 0207 infotype alone, when i tried to create after 0207 creation, it is not accepting the information, Here i am looking for some one help, where some one can throw a torch for this issue.
I had checked with dynamic action, which shows correctly.
Pls help me in this regards, this is very urgent.
Thanks in advance for your reply.
Regards,
Babu.

Generally, an Infotype 208 is not required. Therefore, you would
not get an error in RPCACLU0 if an employee does not have one assigned
Without an IT0208 record, the system uses the tax authority
specified on IT0207. Additionally, the same applies to IT0209; one is
not required and the system will use that of either IT0207 or IT0208.
Best regards,
Márcio Leoni

Unable to create the Distribution cycle with WBS Element as Receiver

Similar Messages

Maybe you are looking for