Unable to delete entries from queue (SMQ2)

Hi
I am unable to delete entries from inbound queue due to number of entries are too high (Approximately 160,000). Deletion in dialog mode producing timeout error...Is there any way to delete these entris in background mode or any other idea about this situation..
Your valuable time & annswer appreciated.
Thanks
Rakesh

Hi Rakesh,
   Check these threads on SMQ2. It may give some help to you:
   Queue issue
   deleting the inbound queue tc smq2
   Also check this file:
  http://help.sap.com/saphelp_nw04s/helpdata/en/d9/b9f2407b937e7fe10000000a1550b0/frameset.htm
Regards,
Subhasha Ranjan

Similar Messages

  • Unable to delete messages from queue.

    I have a journaling rule setup to send mail to a archive appliance. I have two messages in my queue that are From Address:<>  to my recipient (my archiver's email address). The journal rule works fine since it is working for all my users mail, but I have two messages stuck in my queue complaining that they could not be categorized and an event 9213 for MSExchangeTransport every 30 minutes. 
    "A non-expirable message with the internal message ID 7996 could not be categorized. This message may be a journal report or other system message. The message will remain in the queue until administrative action is taken to resolve the error. Other messages may also have encountered this error. To further diagnose the error, use the Queue Viewer or the Mail Flow Troubleshooter."
    I have tried via the GUI and Shell to remove these two messages. The GUI gives me an error:
    Microsoft Exchange Error
    Action 'Remove (with NDR)' could not be performed on object 'RE: Test to determine if email can be delivered & Received'.
    RE: Test to determine if email can be delivered & Received
    Failed
    Error:
    The requested operation can't be performed for the object with identity MyMailServerName\Submission\7999.
    OK
    The Shell will actually not report back an error but I still have those messages in the queue. The command to see info about the message was:
    Get-Message -IncludeRecipientInfo | Where { $_.Recipients -Like "*[email protected]*" } | Format-List
    Then I tried deleting the message using the "InternetMessageID" info I gathered from this.
    Remove-Message -Filter {InternetMessageID -eq "[email protected]"} -WithNDR $false
    This prompts me for a Yes, No, etc... responce (I thought I had it this time) and gave me no error, but the message still resides in queue.
    I am at a loss. Any help?

    Correct, two messages stuck in queue and cannot remove.
    Environment is a Windows 2003 R2 w/ SP2 64bit server, Exchange 2007 SP1 with all roles, AD/DNS is also Windows 2003 R2 w/ SP2 64bit.
    This just seemed to start happening a few days ago and just with these two particular messages. I have a archive appliance from ArcMail and a journal rule setup in Exchange to journal all mail to the ArcMail appliance. This has been working and continues to work except for these two messages. 
    [PS] C:\>Get-Message -IncludeRecipientInfo | Where { $_.Recipients -Like "*[email protected]*" } | Format-List
    Identity          : CO-MAIL1\Submission\7996
    Subject           : RE: Test to determine if email can be delivered & Received
    InternetMessageId : <[email protected]>
    FromAddress       : <>
    Status            : Retry
    Size              : 29638B
    MessageSourceName : Journaling
    SourceIP          : 255.255.255.255
    SCL               : 0
    DateReceived      : 9/18/2008 1:39:34 PM
    ExpirationTime    :
    LastError         : Categorization failed. The message will be deferred and ret
                        ried because it was marked for retry if rejected.
    RetryCount        : 0
    Queue             : CO-MAIL1\Submission
    Recipients        : {[email protected]}
    IsValid           : True
    ObjectState       : Unchanged
    Identity          : CO-MAIL1\Submission\7999
    Subject           : RE: Test to determine if email can be delivered & Received
    InternetMessageId : <[email protected]>
    FromAddress       : <>
    Status            : Retry
    Size              : 29623B
    MessageSourceName : Journaling
    SourceIP          : 255.255.255.255
    SCL               : 0
    DateReceived      : 9/18/2008 1:39:34 PM
    ExpirationTime    :
    LastError         : Categorization failed. The message will be deferred and ret
                        ried because it was marked for retry if rejected.
    RetryCount        : 0
    Queue             : CO-MAIL1\Submission
    Recipients        : {[email protected]}
    IsValid           : True
    ObjectState       : Unchanged
    Domain Controller Diagnosis
    Performing initial setup:
       Done gathering initial info.
    Doing initial required tests
       Testing server: co-site\CO-DNS1
          Starting test: Connectivity
             ......................... CO-DNS1 passed test Connectivity
    Doing primary tests
       Testing server: co-site\CO-DNS1
          Starting test: Replications
             ......................... CO-DNS1 passed test Replications
          Starting test: NCSecDesc
             ......................... CO-DNS1 passed test NCSecDesc
          Starting test: NetLogons
             ......................... CO-DNS1 passed test NetLogons
          Starting test: Advertising
             ......................... CO-DNS1 passed test Advertising
          Starting test: KnowsOfRoleHolders
             ......................... CO-DNS1 passed test KnowsOfRoleHolders
          Starting test: RidManager
             ......................... CO-DNS1 passed test RidManager
          Starting test: MachineAccount
             ......................... CO-DNS1 passed test MachineAccount
          Starting test: Services
             ......................... CO-DNS1 passed test Services
          Starting test: ObjectsReplicated
             ......................... CO-DNS1 passed test ObjectsReplicated
          Starting test: frssysvol
             ......................... CO-DNS1 passed test frssysvol
          Starting test: frsevent
             ......................... CO-DNS1 passed test frsevent
          Starting test: kccevent
             ......................... CO-DNS1 passed test kccevent
          Starting test: systemlog
             ......................... CO-DNS1 passed test systemlog
          Starting test: VerifyReferences
             ......................... CO-DNS1 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
       Running partition tests on : DomainDnsZones
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
       Running partition tests on : Schema
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
       Running partition tests on : Configuration
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
       Running partition tests on : lcsd
          Starting test: CrossRefValidation
             ......................... lcsd passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... lcsd passed test CheckSDRefDom
       Running enterprise tests on : lcsd.local
          Starting test: Intersite
             ......................... lcsd.local passed test Intersite
          Starting test: FsmoCheck
             ......................... lcsd.local passed test FsmoCheck
    [PS] C:\>Remove-Message -filter {FromAddress -eq "<>"} -withNDR $false -debug -verbose
    VERBOSE: Remove-Message : Beginning processing.
    Confirm
    Are you sure you want to perform this action?
    Removing the messages that match filter "FromAddress -eq "<>"".
    Yes  Yes to All  No  [L] No to All  Suspend  [?] Help
    (default is "Y"):Y
    VERBOSE: Remove-Message : Ending processing.
    [PS] C:\>Remove-Message -Filter {InternetMessageID -eq "[email protected]"} -WithNDR $false -debug -verbose
    VERBOSE: Remove-Message : Beginning processing.
    Confirm
    Are you sure you want to perform this action?
    Removing the messages that match filter "InternetMessageID -eq
    "[email protected]"".
    Yes  Yes to All  No  [L] No to All  Suspend  [?] Help
    (default is "Y"):Y
    VERBOSE: Remove-Message : Ending processing.
    [PS] C:\>Remove-Message -filter {FromAddress -eq ""} -withNDR $false -debug -ver
    bose
    VERBOSE: Remove-Message : Beginning processing.
    Confirm
    Are you sure you want to perform this action?
    Removing the messages that match filter "FromAddress -eq """.
    Yes  Yes to All  No  [L] No to All  Suspend  [?] Help
    (default is "Y"):Y
    VERBOSE: Remove-Message : Ending processing.
    [PS] C:\>
    Tried several filter options and all had the same result. No events in the event viewer and did not remove the stuck messages.

  • BOBJ is unable to delete file from OFRS

    System Info:
    Business Objects Enterprise XI3.1 SP3 FP3.2
    Windows 2003 Server Enterprise Edition SP3
    Oracle 10.2
    Java 1.6.0_20
    APACHE Tomcat 5.5.20
    2 clustered servers
    FRS located on SAN Disk Drive connected to primary server (Winchester1)
    We use WebIntelligence exclusivly.
    We are receiving the following error in our event log on our clustered server:
    Source: BusinessObjects_CMS
    Category: General
    Type: Warning
    Event ID: 33018
    Computer: Winchester2
    Unable to delete file from the file repository. Make sure a File Repository Server is running and registered and enabled. Details : Failed to connect to the File Repository Server output. Make sure the server is up and running.
    We have verified the FRS is running and we are able to connect to it from our clustered server (Winchester2).  The security settings are set to full control for the admin group and the users have Read/Write access to the file store folders.  The errors are filling up our event logs and causing issues with the servers.  this appears to be happening each morning and the file it is trying to delete is an .xls file.
    We have a ticket open with SAP Support but they are just as baffled as we are and keep sending us from one group to another and tell us they need to look at it on thier end and they will get back to us.
    Has anyone had this happen on their system?

    Hi Richard, did you ever get this issue resolved?  We are having a similar issue on XI R3 SP4 using NAS/CIFS shares for our File Stores.  We see this issue mainly after our servers are patched and a full environment restart is initiated.  Like you, our event logs fill up with so many error messages I cannot pinpoint exactly when the issue starts happening.
    Any help would be much appreciated.

  • Delete entries from the table

    Hi folks,
    I have delete program to delete entries from a custom table and has only one feld in it.
    tables: ZABC
    selection-screen begin of block B1 with frame title text-110.
    select-options: P_KOSTL for ZABC-KOSTL.
    selection-screen end of block B1.
    delete from ZABC where KOSTL in P_KOSTL.
    Upon executing I am entering certain cost center ids on the selection screen to delete them from the table.It did not work.
    what is it I am missing?
    Thanks,
    SK

    Hi,
    Try this sample code..Replace ZABC with your table..
    TABLES: ZABC.
    selection-screen begin of block B1 with frame title text-110.
    select-options: P_KOSTL for ZABC-KOSTL.
    selection-screen end of block B1.
    START-OF-SELECTION.
    * Delete the records from the table.
    DELETE FROM ZABC where KOSTL IN P_KOSTL[ ].  " [] for the select-options.
    IF sy-subrc <> 0.
      ROLLBACK WORK.
    ELSE.
      COMMIT WORK.
    ENDIF.
    Thanks,
    Naren

  • Windows Server 2012 R2 RDS: RDS Users are unable to delete files from their desktop

    Hello,
    We are working with Windows Server 2012 R2 RDS. We also implemented User Profile Disks. This is all working fine without problems. The only issue I have is that normal users are unable to delete files from their desktop. They are getting a message:
    you'll need administrator permission to delete this file, with the prompt for administrator access.
    They can edit, copy, rename, cut and paste files. But they cannot delete a file from their desktop.
    I checked the security permissions of the files on the desktop (for example a normal self-created PDF file) and the users are owner and have "Full Control" over the files.
    I checked the file permissions and took a look under "Advanced", selecting the specific domain user and checked the "Advanced Permissions" and the user has the "Delete" option checked. So he should be able to delete the
    file.
    I am guessing this is UPD related issue, or something in GPO. But I already unlinked the GPO objects, that I felt could be the source of this problem, but without results.
    Could someone give me a hint on where to look? It's kinda annoying to users, that they can't delete their own files.

    Hello Bria,
    What you should check first, is the NTFS permissions on the User Profile Disk to begin with. See if the user has full control over the items that are in the UPD.
    Also check the GPO's that are enabled for the user and computer account. You can check that by running: gpresult /h <path>\gpresult.html
    There are two GPO settings that could prevent the user from deleting his/her own items: 
    User
    Configuration\\Policies\\Administrative Templates\\Windows Components\\Windows Explorer\
    Hide these specified drives in My Computer
    Prevent access to specified drives in My
    Computer
    There might be other GPO settings, that block deleting items on the UPD, but can't think of any out of my head.
    I can only think NTFS and GPO settings that might prevent the user from deleting items. In my case it was a GPO setting, that I didn't suspect.

  • Unable to delete files from powerpoint

    I just installed MS office for iPad. I am experiencing an annoying problem with Powerpoint. When I download and open a file from OneDrive, oftentimes I am subsequently unable to delete it from within the iPad powerpoint program. I get a message that the file cannot be deleted because it is in use. I am able to delete the file from OneDrive on my computer no problem, but it remains on the iPad. Clearing the file cache from settings does not do the trick. I have to uninstall and reinstall powerpoint to get rid of the undeletable files. Am I missing something here? Thanks.

    I just installed MS office for iPad. I am experiencing an annoying problem with Powerpoint. When I download and open a file from OneDrive, oftentimes I am subsequently unable to delete it from within the iPad powerpoint program. I get a message that the file cannot be deleted because it is in use. I am able to delete the file from OneDrive on my computer no problem, but it remains on the iPad. Clearing the file cache from settings does not do the trick. I have to uninstall and reinstall powerpoint to get rid of the undeletable files. Am I missing something here? Thanks.

  • Unable to delete applications from my i-pad 2

    I have delete some applications on the ipad from the  computer, but they are still on the ipad and i am unable to delete them from the ipad itself !! ? any help please ???

    Some apps, i.e. the Apple standard ones like iTunes and Newsstand, can't be deleted.
    For the rest, hold on the icon until it goes jiggley, then tap the small cross in the left corner.
    http://www.apple.com/support/ipad/assistant/application/#section_5

  • Unable to delete emails from care4free using thunderbird

    I have just bought an imac and have transfered my thunderbird account from my old pc. I am unable to delete messages from my care4free POP account. Anyone help with this please?

    Problems associated with deleting or moving email usually stem from failure to compact mail
    folders, especially inboxes. This is because deleted email is not removed from the
    application until you compact (expunge is the technical term). This can be done
    automatically by a setting in your email account. Manually is simple enough. On any mail
    folder do this: right click/compact (or File/Compact Folders). This is especially important
    on inboxes but also, any folder from which you regularly delete/move email.
    If you are experiencing problems you probably have a lot of uncompacted mail so be patient
    the first time and watch the activity bar for its status (at the bottom of the application).
    Mario Pauls
    Running Thunderbird 24.3.0
    Windows Vista Home Premium
    Used Thunderbird with Lightning integrated since 2005
    Find more useful info here:
    http://forums.mozillazine.org/viewtopic.php?f=39&t=2638361
    rais
        Posts: 951
        Joined: May 25th, 2011, 8:57 pm
    Post Posted January 7th, 2013, 6:47 pm
    two things just for starters:
        Archive all the mail currently in the Inbox
        http://kb.mozillazine.org/Archiving_your_e-mail
        enable AutoCompact
        http://kb.mozillazine.org/Compacting_fo ... omatically
    Last edited by rais on January 8th, 2013, 3:01 am, edited 1 time in total.

  • Unable to delete photo from ipad

    When I first got my ipad, I synced s photo from My Pictures.  I am unable to delete it from the ipad by using the delete option.  How do I get it off my ipad?

    Go to the folder on your computer that those synced photos are in. Move those photos elsewhere then sync and the photos will go away.
    Alternatively you can connect your device to your computer and open iTunes. Click on the name of your device and navigate to the photos tab. Choose a different folder or deselect any folder then sync. Your device will replace the photos on your device with what's in that other folder, or simply remove them all together if you deselect all photos syncing.
    Given the difficulty of removing synced photos, I stopped syncing photos a long time ago. Instead if I want photos on my iPad I'll just mail them to myself...or you can use any number of photos apps that have the ability to sync/share data, or upload them to something like dropbox and then download them onto your device. Downloaded or saved photos can be deleted from inside the photos app.

  • Unable to delete rows from Target.

    Hello everyone,
    I am unable to delete rows from target data store. Here is what I have done.
    Source Oracle 10g - staging 11g - Target Oracle 11g
    I have implemented consistent set CDC on data model in staging and added 2 tables to CDC and turned on the journals . Both tables A and B are joined together via Column E (primary key of table A). Table A is the master table(has foreign key). Table B is child table. Target column consists of all the columns of both table A and B.
    Following is what I am able to do and not to do
    ABLE TO DO. If data is inserted into both or any of journalized tables I can successfully load the same in target by performing following steps. 1. Extend the consistency window at model level. Lock subscriber. Run the interface with any source table marked as Journalized data only. Unlock subscriber and purge journal.
    ABLE TO DO. If data is updated in any of the journalized table, along with the steps mentioned above I can execute two interfaces. In one Interface table A marked as journalized data only Joined with table B and in second interface table B marked as Journalized data only joined to table a.
    NOT ABLE TO DO If data is deleted from one or both tables it shows up as journalized data in JV$D<tablename> marked as D with date and subscriber name but when i run the interface by extending the window , locking subscriber executing both interfaces, unlock subscriber purge journals. no change takes place is Target. After unlocking subscriber step, journalized data gets removed from JV$D view. Please let me know what I am doing wrong here. How can rows delted from source can also be deleted from TARGET?
    NOTE : In the flow table SYNC_JRNL_DELETES is YES
    In moel under jounalized table tab Table have following order Table A folloed by Table B
    Thanks in advance
    Greenwich

    Sorry I still do not get it. when you say "Its a legacy app", are you talking about the VB.NET app ?
    If so then I repeat my self :-) Why not to connecting to the SQL server directly?
    * even if you need information from several databases (for example ACCESS + SQL Server), in most cases, it is much better to connect directly and get each information to the app. Then in your app you can combine the information and analyse it
    [Personal Site] [Blog] [Facebook]
    Access app is the legacy app. 

  • Unable to delete videos from my iad

    I am unable to delete videos from my ipad.  When I go to Settings - Usage - Storage; the video section will show up as no data in it even if it has multiple videos downloaded from itunes in it.  I am using iOS 7.0.4 on a new iPad mini Retina 64GB.  I am seeing the same problem on my iPhone 5S. 

    I was puzzled by this since ios7 I waited for  7.1 and thought it was fixed as it seems to go away. Now its back in 8.0 and 8.0.2.
    It seems somewhat related to incomplete accounting of downloaded video and music too on the device and applying to storage left on device as these two icons are not showing up under usage in settings, even with show all selected.
    Here is what I did:
    Go to "Videos" under settings, turn off "show all videos", this will show only videos that presumably are on your device.
    Go to Videos" app and you should see video that is presumably downloaded to device, select the cloud icon and as unintuitive as it seems, download the video as if it is not already on the device.
    When one or all of your videos finish, go to "Settings", "General", "Usage", you will see an increase in available storage.
    While there, select "Manage Storage" and "Videos" should show up in usage and an amount of MB or GB.
    Select "Videos" under storage and your videos will present. Select "Edit" in upper right corner.
    Select red "minus symbol", delete.
    As you do this you will see more and more of your devices storage coming back in available storage.
    This is similar to or is a memory leak issue that needs to be addressed. It apparently hasn't yet.
    The same process works with Music. I haven't seen this as an issue in dealing with apps.
    Mitchell

  • Unable to delete pictures from album on iphone

    I am unable to delete pictures from album on Iphone 5

    Hi tat33,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    You can remove photos, etc. from your iPhone by following these directions in reverse
    (i.e. remove the checkmark from an album you previously selected to add.)
    iTunes 11 for Mac: Add photos to iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12116?viewlocale=en_US
    Cheers,
    Judy

  • Unable to delete mail from inbox. Message cannot move mail from inbox to trash.  How do I solve this.

    I am unable to delete mail from my inbox.  A window appears saying "message could not be moved to the mailbox trash.  How do I fix this.

    Give your phone a reboot - hold down power/home button together for 10 to 15 secs or until you see the apple logo and then release, wait for your phone to reboot and then try moving  your mail again.

  • Unable to delete photos from my ipad2 .

    I am unable to delete photos from my ipad2. I am able to select the photos to delete but when I press the red delete button nothing happens. Is anyone else having this experience? Is there a known problem. Is there a solution?

    You don't say what type of photos - were they taken with the iPad or synced from your computer ?
    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/wesites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view. Photos that were synced from your computer are deleted by removing them from where they were synced from and then re-syncing (if you were able to delete them directly on the iPad, then the next time you synced photos they would be put back onto the iPad, unless you remembered to also remove them from your computer).

  • Unable to delete data from a partition

    Hi,
    Unable to delete data from a partition
    I am using the command as:
    ALTER TABLE TEST DROP PARTITION DATE_20090820090000
    Its giving 0 rows deleted.Bu there are 200 rows for the Partition.
    The partition is getting deleted but the data remains.
    I want a command where the data in the partition also to be deleted along with partition.
    Any help will be needful for me

    SQL> CREATE TABLE range_part (
    prof_history_id NUMBER(10),
    person_id NUMBER(10) NOT NULL,
    organization_id NUMBER(10) NOT NULL,
    record_date DATE NOT NULL)
    PARTITION BY RANGE (record_date) (
    PARTITION yr0 VALUES LESS THAN (TO_DATE('01-JAN-2007','DD-MON-YYYY'))
    PARTITION yr7 VALUES LESS THAN (TO_DATE('01-JAN-2008','DD-MON-YYYY'))
    PARTITION yr8 VALUES LESS THAN (TO_DATE('01-JAN-2009','DD-MON-YYYY'))
    PARTITION yr9 VALUES LESS THAN (MAXVALUE) );
    Table created.
    SQL> INSERT INTO range_part VALUES (1, 1, 1, SYSDATE-720);
    INSERT INTO range_part VALUES (2, 2, 2, SYSDATE-360);
    INSERT INTO range_part VALUES (3, 3, 3, SYSDATE-180);
    INSERT INTO range_part VALUES (4, 4, 4, SYSDATE);
    1 row created.
    SQL>
    1 row created.
    SQL>
    1 row created.
    SQL>
    1 row created.
    SQL>
    SQL> commit;
    Commit complete.
    SQL> SELECT * FROM range_part;
    PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
    1 1 1 31-AUG-2007 05:53:22
    2 2 2 25-AUG-2008 05:53:22
    3 3 3 21-FEB-2009 05:53:22
    4 4 4 20-AUG-2009 05:53:22
    SQL> SELECT * FROM range_part PARTITION(yr7);
    PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
    1 1 1 31-AUG-2007 05:53:22
    SQL> alter table range_part drop partition yr7;
    Table altered.
    SQL> SELECT * FROM range_part PARTITION(yr7);
    SELECT * FROM range_part PARTITION(yr7)
    ERROR at line 1:
    ORA-02149: Specified partition does not exist
    SQL> SELECT * FROM range_part;
    PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
    2 2 2 25-AUG-2008 05:53:22
    3 3 3 21-FEB-2009 05:53:22
    4 4 4 20-AUG-2009 05:53:22

Maybe you are looking for