Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh

Similar Messages

  • I currently have aT-Mobile sim, and therefore, a UK telephone number. Can I get a sim from EE with the same number to use in my iphone 5?

    I currently have aT-Mobile sim, and therefore, a UK telephone number. Can I get a sim from EE with the same number to use in my iphone 5?

    The easiest way to find out what carrier it's locked to would be to call the store where you purchased the phone.
    The phone can be unlocked from any location.  However, most carrier have restrictions about unlocking and you have to contact them for details.

  • HT4557 I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

    I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

    Hello daltonfromgbr
    Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Regards,
    -Norm G.

  • How do I stop Address Book from opening with the same searched name?, How I stop Address Book from opening with the same searched name?

    Every time I open Address Book (Lion) it opens to the same vcard with the same name in the search field. How do I keep this from happening? I have tried deleting the vcard, deleting the plist, and importing/exporting my contact. However, the search field contents are alwyas the same - even if I delete the field, close, and re-open. Thanks.

    Hi Romulus949,
    You should take a look at the Knowledge Base article [[How to set the home page]].
    There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. Then you can set your homepage to anything you like.
    Hopefully this helps!

  • HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

    Still  using the @mac.com   mail  address and up   to date on everything, but have not gone to Maverick.  All of a sudden Mail wouldn't let me delete.  Said that title of email was already in trash.  And sure enough it was.  Clicking on the help button on the message gets Nothing.
    The selected topic is currently unavailable.
    The topic you were trying to view could not be found.
    "couldn’t be copied to “Messages” because an item with the same name already exists."
    Any ideas.  My mail is not tied to gmail etc.. just all by it's lonesome.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Unable to delete role from a project

    hi
    i added a role to a project.   i staffed it with a resource.  Now when i try to remove this staffing.. i get the message
    "Cannot delete project role staffing"
    the help is as follows
    Cannot delete project role staffing
    Message no. DPR_BUPA_LINK020
    Diagnosis
    You are trying to delete a staffing. However, the resource of this staffing is entered as a responsible resource for at least one project element or is assigned to at least one task. The status of the assigned project element does not permit changes. This means that the links cannot be deleted and therefore, the actual staffing cannot be deleted either.
    System Response
    The system does not delete the project role staffing and issues appropriate messages.
    Procedure
    Reset the status of the assigned project element so that the changes can be made.
    Make sure that the links are removed by authorized users or obtain the relevant authorization from your system administrator.
    But i have added the role and staffed it afresh.  i am also not able to delete any newly added roles.
    Pls suggest!
    Regards,
    Sujata.

    Hi,
    Have u tried by following dignosis solution given in message help. Please try by removing the responsible resource from basic data tab of phase or task for which the person is assigned. also check the status of task or phase for which he is assigned as responsible person. if the perticualar task is complete then I beleive tht u will not be able to remove responsible person.
    Pramod

  • Unable to delete photos from iPad with Image Capture or PhoneView

    I recently downloaded about 50GB of photos to my iPad. They are RAW+JPG. Some of the RAWs are from a new camera that does not have RAW support on the Mac yet.
    Using Image Capture I downloaded all the photos to my Mac. They all have the green check-mark next to them indicating they have been downloaded.
    After confirming that the images transferred without becoming corrupted, I went back to Image Capture and selected all, then hit the Delete button. I confirmed that I really want to delete them all permanently.
    Then a little floating window appears that says "Deleting..." and it stays like that for a long time. Eventually Image Capture simply loses its connection with the Mac and simply leaves this console message:
    5/22/12 10:58:38.494 AM com.apple.launchd.peruser.503: ([0x0-0x91091].com.apple.PTPCamera[9744]) Exited with code: 255
    Back on the iPad, I see that some of the JPEG-format photos have been deleted while the RAWs that went with them are still there. Meanwhile for many others, both the RAW & JPEG both still remain.
    Any ideas what might cause this? Is it because the Mac doesn't yet have support for the RAW file and therefore doesn't recognize it as an "image" file?

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Calling a method of one class from another withing the same package

    hi,
    i've some problem in calling a method of one class from another class within the same package.
    for eg. if in Package mypack. i'm having 2 files, f1 and f2. i would like to call a method of f2 from f1(f1 is a servlet) . i donno exactly how to instantiate the object for f2. can anybody please help me in this regard.
    Thank u in advance.
    Regards,
    Fazli

    This is what my exact problem.
    i've created a bean (DataBean) to access the database. i'm having a servlet program (ShopBook). now to check some details over there in the database from the servlet i'm in need to use a method in the DataBean.
    both ShopBook.java and DataBean.java lies in the package shoppack.
    in ShopBook i tried to instantiate the object to DataBean as
    DataBean db = new DataBean();
    it shows the compiler error, unable to resolve symbol DataBean.
    note:
    first i compiled DataBean.java, it got compiled perfectly and the class file resides inside the shoppack.
    when i'm trying to compile the ShopBook its telling this error.
    hope i'm clear in explaining my problem. can u please help me?
    thank u in advance.
    regards,
    Fazli

  • Is there a way to add a column after a filled DataTable from SQL with the same rows?

    My problem is that not to add rows like filled by SQLDataAdapter at the same row in DataGridView. How to make that? I showed below the details with my code also a screen shot, which shows the rows differences from the origin one.
    I don't want to add an expression as column behave in my sql script to get what I need with query result. I don't want to obtain that way.
    using (SqlConnection c = new SqlConnection(ConnStrMSSQL))
    c.Open();
    // 2
    // Create new DataAdapter
    using (SqlDataAdapter a = new SqlDataAdapter("SELECT SIPNO, SERINO, TARIH FROM SNOHAREKETLER WHERE Cast(TARIH as DATE) BETWEEN '2015/03/20' AND '2015/03/20' AND (TEZNO = 'T23' OR TEZNO = 'T31') AND CIKTI is null", c))
    // 3
    // Use DataAdapter to fill DataTable
    DataTable t = new DataTable();
    a.Fill(t);
    t.Columns.Add("MyColumn", typeof(string));
    DataRow workRow;
    int iGetCount = t.Rows.Count;
    for (int i = 0; i <= iGetCount - 1; i++)
    workRow = t.NewRow();
    workRow["MyColumn"] = i;
    t.Rows.Add(workRow);
    dataGridView1.DataSource = t;

    The extra column isn't applied to only certain rows.  The columns of a table identify what data each row will contain.  Hence adding a column to the table automatically adds them to the rows.  What you're seeing is that all the initial rows
    aren't being assigned a value so they retain their default value of null.  Later you enumerate the rows of the existing table and call AddRow which adds new rows.  This isn't adding columns, but rows.
    To generate values for the existing rows you should ideally simply pass the data back from the database.  DT computed columns can be difficult to set up as it is limited to what it can do.  If you want to use a computed column on the Datatable
    itself then define the column as a computed column and every row will calculate its own value.
    DataTable data = GetData();
    //Add elapsed time column
    var col = new DataColumn("ElapsedTime", typeof(TimeSpan), "expr");
    data.Columns.Add(col);
    dataGridView1.DataSource = data;
    The issue you will run into however is that calculating a diff on DateTime doesn't work in a computed column as the expression doesn't support the necessary functions.  You can google for how people solved this if you are interested in alternatives. 
    Most people just tend to add the column and then hook into the various change events to update the value as needed.

  • Create PDF from scanner with the same size that the original

    Hello!!!
    i have a problem with acrobat professional
    i create a PDF from scanner but when the pdf is finished is shorter than the original picture.
    thanks for your help.

    Check in either page setup or if printing dialog box, and see if set 94% which pdf is usually set to. Set to full page or full.
    That's the only thing I can think of.

  • Different Risk Analysis Results with the same user from 2 different RAR

    Hi..
    I've loaded the same Risks, Rules, etc, into 2 GRC RAR environments (Sandbox and Quality systems); both of them are connected with the same SAP ECC system. But when I do a User Risk analysis (authorization level), the result from Sandbox is different from Quality system. I donu2019t have users or roles mitigated yet, users are synchronized, rules are exactly the same and I donu2019t know what happen??... Please, help me.
    Thanks...

    Hi...
    If I do a Full Sync of users to the same ECC system from both RAR boxes, I got different number of users loaded (i.e. 18757 vs. 18141), similar case with the full sync of roles. (13100 vs.  13150).
    If I load exactly the same set of functions to both RAR systems and I generate the rules, I got the same problem, different number of rules is generated.
    I've verified both RAR configuration and they are the same (excluded users, roles mitigated, etc.)
    Is it a normal behavior? What could be wrong?
    Thanks in advance!!

  • Transporting role menu and workbook created diurectly in production system

    Hi gurus,
    We have several workbooks (and queries) that are created directly in production system. thoose workbooks are connected to a role that is created in development system and transported to production system.
    Now, we would like modify this role in development then tranport it on production system, but we are afraid that will be wiped out (overwrite) our production system workbooks (because the role not contains this workbook in development).
    Could you please explain to us what we have to do in order to not wiped out our production workbooks.
    Thank you in advance

    thank you, it's more clear for me...
    Exactly, to have all my requests and workbook in development, I tried to use "Transport order of copy (it means transport queries from Production system to development system)", then to connect them with the corresponding roles in development, but I have the think that BW considers them as new requests when I re-transport them again on the prod.)
    Could you say me if i can transport my production system queries on my development system, and manage them in this system (development) in the future.
    Thank you in advance

  • Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.

    I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
    to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
    Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
    per my business requirement.
    The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
    to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
    "Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
    same version and product ID."
    Please assist me anyone. It will be so kind of you.....
    Naveen Kumar
    Steria India Ltd.

    Did you updated the  AppManifest.xml file
    and change the version.
    If this helped you resolve your issue, please mark it Answered

  • Logging on with the same user?

    Hi all,
    I know there is some rule that allows a user to log on more than once. A client of mine says they could always log in to the same company twice with the same username, but now they can't. They can only log on to 2 different companies with the same user name.
    Was there a change made or am I missing something? I have tested on a single computer. I open 2 instances of SAP Business One 2007 and log in with the same user into the same company. THe first one logs on fine, the second one says "This user is already connected to this company". If I log on to a different company with that user it logs in.
    I really thought you could log on with the same user to the same company.
    The company has a distributed environment and people run around every now and again logging on at different computers (especially supervisors). This is a critical issue for them.
    Please help
    Thanks,
    Adele

    Adele,
    I am not sure if you might have changed the default layout of SQL Management Studio, so you should
    log on to Management Studio and go to Menu 'Window' -> 'Reset Window Layout'.
    This will restore the default layout, which usually is the very same after a fresh SQL Server 2005 installation.
    Now you should find on the left hand side the so called Object Explorer. In the Object Explorer Window you should see the SQL Server name, below of this should be
    SQL Server name
    +Databases
    +Security
    +Server Objects
    +Replication
    -Management
          +Mantenance Plans
          +SQL Server Logs
              Activity Monitor
    +Notification
    Maybe there are some more entries, depending on the options choosen during installation.
    Kind regards
    Mario Schoenberg
    Senior Support Consultant
    SAP Business One Forums Team

  • Windows Server 2012 R2 RDS: RDS Users are unable to delete files from their desktop

    Hello,
    We are working with Windows Server 2012 R2 RDS. We also implemented User Profile Disks. This is all working fine without problems. The only issue I have is that normal users are unable to delete files from their desktop. They are getting a message:
    you'll need administrator permission to delete this file, with the prompt for administrator access.
    They can edit, copy, rename, cut and paste files. But they cannot delete a file from their desktop.
    I checked the security permissions of the files on the desktop (for example a normal self-created PDF file) and the users are owner and have "Full Control" over the files.
    I checked the file permissions and took a look under "Advanced", selecting the specific domain user and checked the "Advanced Permissions" and the user has the "Delete" option checked. So he should be able to delete the
    file.
    I am guessing this is UPD related issue, or something in GPO. But I already unlinked the GPO objects, that I felt could be the source of this problem, but without results.
    Could someone give me a hint on where to look? It's kinda annoying to users, that they can't delete their own files.

    Hello Bria,
    What you should check first, is the NTFS permissions on the User Profile Disk to begin with. See if the user has full control over the items that are in the UPD.
    Also check the GPO's that are enabled for the user and computer account. You can check that by running: gpresult /h <path>\gpresult.html
    There are two GPO settings that could prevent the user from deleting his/her own items: 
    User
    Configuration\\Policies\\Administrative Templates\\Windows Components\\Windows Explorer\
    Hide these specified drives in My Computer
    Prevent access to specified drives in My
    Computer
    There might be other GPO settings, that block deleting items on the UPD, but can't think of any out of my head.
    I can only think NTFS and GPO settings that might prevent the user from deleting items. In my case it was a GPO setting, that I didn't suspect.

Maybe you are looking for

  • DVD drive does not burn/erase rewritables - Satellite P100-347

    Hello, I have purchased a Toshiba Satellite p100-347 PSPA6E laptop. It has a DVD Burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn all types of dvds (please see example using dvdino: http://tinyurl.com/2

  • Fail to start apple mobile device

    I just install itunes 11.1.5 for 64bit windows 7, when i go to services to start the apple mobile device there is a error massage pop up... "The Apple Mobile Device service on local computer started and then stopped. Some services stop automatically

  • Twitter iOS badge bug

    Has anyone figured out how to disable the Twitter icon notification badge on iOS 8 yet? Option not present in Settings.app.

  • Mail sending in dunning

    Hello, Actually, in our SAP ERP 6.0 system the dunning letters are sent by mail (transaction F150), and I want to modify the sender address for dunning process. Right now, the sender address is set to the mail of user who sends dunning. I noticed tha

  • Unusual icon next to User icon in Console One

    Hi, I was hoping to locate a list of Novell icons for Console One, as I need to identify an icon which has appeared next to an existing user. The existing user has the standard user icon, then a symbol which looks like a few dots circling anti-clockw