Unable to edit OOAC (T77S0) entries to activate entries

Hello Folks,
I've been trying to teach myself SAP HR Authorizations. Running through the material, i tried to activate extened check on HR Master data (p_origxx). To do this i need to modify the value in table T77S0 (through transaction OOAC). But the system comes up with the error "do not edit (SAP entry)". I'd already modified the client settings (as this is a sand boc client) to allow changes.
I am not sure why the system does not allow me to change the entries (i have checked the SE06 system change options and SAP_HR is set to restricted changes).
Can you please help me identify how to get about and activate this. (i also want to toggle on the structural authorization check)
Regards,
Prashant

Hi
Avoid changing this data. If the change is inavoidable, document it carefully, so that it can be repeated, if necessary, after an upgrade or release change. The best way to do this is to put the data in a change request, which you can export before an upgrade or release change, and import again afterwards.
CReate a request and do it in required clients .
Regards
Mysterious

Similar Messages

Unable to edit the data in z-table

Hi All,
I can create new entries in a z-table.
But i am unable to edit the existing rows of a z-table in the Production server.
The same can be done in DEV and test servers.
How to come out of this issue?
Kindly Help me....
Regards
Pavan

Hi,
For this you have to maintain table maintenance generator....
go to se11....your table name
utilities--->table maintenance generator...
build a table maintenance generator..and transport the table...
then only you will be able to edit data in production server...
Regards
Debarshi

Unable to edit Function Library

Hi all,
I am unable to edit a function library I created. I always get a NullPointerException:
There is no syntax error in the included functions. The Library is activated, but it is also not found by the runtime. When I send a test message I get an error that the used functions were not found.
I have already tried to create another function library. I am able to create and activate it, but get the same error when I try to edit it.
I am working on a Java single-stack.
Any suggestions?

I already tried this.
But the main problem ist: When I am in ESR in the function library and klick the Edit-Button, I get the error message shown above. So I am not able to edit any function library.
What could be the problem? I already tried:
- To remove all special characters from the name and description of the function library
- To create a new namespace with a new function library

Can't edit or add entries to Contacts

I am unable to edit any entries in Contacts and cannot add any new contacts in Mavericks. As soon as I click "Done" after an edit, the contact reverts to its original contents, i.e. the edit disappears. If I add a new contact, it also disappears when I click "Done."
Has anyone else experienced this? Any ideas about what is going on?

Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.AddressBook.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.

How to edit one particular entry in custom database table

Hi all,
I want edit one particular entry in custom database table with or without a program.
1.   I tried using SE16N and &SAP_EDIT but im unable to get entries to edit.
2.   I tried using '/h' and 'code = edit' but it is prompting me to delete an entry but not edit.
3.   I tried using modify statement. But in vain.
I tried this statements through programatically,
                        MODIFY itab FROM wa_itab TRANSPORTING zabc.
                        MODIFY zsample_02 FROM itab.
please suggest with out writing a program, if possible.

Hi ,
Try with FM SE16N_INTERFACE.
1 .Go to SE37
2. Enter FM SE16N_INTERFACE and execute
3. Give table name in Itab,
I_EDIT                  =
X
I_SAPEDIT             =
X
4. Press F8
5. Edit table entries and save.
Thanks

Unable to edit zcsa/installed_languages

Hi,
I am performing language configuration in a newly installed ECC6.0 IDES system.
in RZ11 I can find the entry zcsa/installed_languages in aread only mode but in RZ10 this entry I cant find.So, I am unable to edit the parameter.
Can any one help me regarding this?( How to edit the value of this parameter in RZ10)
Regards,
Moulinath

I had the same problem. Saw this unsolved thread. So thought I would clear it up since I found what I was doing wrong. May be this is a well known thing in BASIS. I am an ABAP guy who had to end up doing some BASIS .
RZ11 displays individual parameters and RZ10 displays/updates profiles which contain such parameter.
To understand the difference - Use F4 help->Choose a profile->GoTo->Profile Values->Of a server->Choose server->Here you will find all the parameters which can be displayed in RZ11. My 2 cents.
Regards,
Shravan

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

I am unable to edit an image in Photoshop.

I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

Chris:
I have to apologize for being misleading on my request for help in
resolving the problem.
Actually the version I am using is CS2 not CS3.
Yesterday I tried numerous times, and ways, to edit an image and each time
it refused to allow me to save it.
The software program just shut down. This evening when I decided to give it
another try it worked perfect.
Guess the program just took the day off.
Thank you for offering to help
Regards,
Doug

Function Module "RSDRD_SEL_DELETION" / Unable to edit selection

Dear experts,
I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
However, when I try to enter selection I_THX_SEL, it tells me:
Unable to edit the object
Message no. MO704
Diagnosis
You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is an object reference
The object is a hashed table
The object list a string
The object has the type REF TO DATA
The object contains object references
The object contains hashed tables
The object is a string
The object contains strings
A subcomponent of the object has a width that exceeds 65,000 characters.
Can anyone tell me how to make it work?

Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of <b>NUMBER</b> fulfill and all those the conditions of <b>DATE</b> fulfill. I would like to delete however only the data records, which fulfill these conditions together.

WebElements - Unable to edit WEPlatform

Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matt

hi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie

User unable to edit contacts

I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
Do you want to save a copy of this item in the default folder for the item?
I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
No other users report the problem, and loading the users account on another computer demonstrates the same problem.
Any ideas what I am missing?

Hi,
The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
Add-MailboxPermission -Identity "xxx" -Owner "xxx"
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Unable to edit

I am a complete novice to Dreamweaver so please bear with me.
I am trying to edit some pages (.php files) for my employer. I was
able to edit the index.php file but none of the others. All of the
html code is greyed out except certain areas and unfortunately, the
part I need to change is greyed out. I am completely unable to edit
any of the greyed areas. I've looked all over to see if there's a
way to unlock the code but I can't see anything. Does anyone have
any suggestions?

If you do not have the associated Template file, it *MAY* be
a trivial
matter to recreate it. We would need to see the code on the
page to know
whether that's possible, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:gecgtk$4g2$[email protected]..
> This sounds as though the page has been made form a
Dreamweaver template.
> Do you have a template folder in the site root folder at
all with a file
> named .dwt in it?
>
> You can unlock the greyed out area of a page by opening
it and
> going>Modify>Templates>Detach Template.
WARNING! WARNING! Doing this may
> help you in the short term but once detached if anyone
updates the
> original .dwt template file the changes WILL NOT
propagate to those pages
> that have been detached from the template.
>
> First look for the .dwt file. It should be in the site
root folder in a
> folder named Templates. Open it if you can find it and
make the changes
> there. All changes made, once saved, will propagate to
all pages in the
> site made from the template.
>
>
>
> gwnyvere wrote:
>> I am a complete novice to Dreamweaver so please bear
with me. I am
>> trying to edit some pages (.php files) for my
employer. I was able to
>> edit the index.php file but none of the others. All
of the html code is
>> greyed out except certain areas and unfortunately,
the part I need to
>> change is greyed out. I am completely unable to edit
any of the greyed
>> areas. I've looked all over to see if there's a way
to unlock the code
>> but I can't see anything. Does anyone have any
suggestions?
>>

Unable to edit document using "Edit with Word" option

Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.

Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to edit ftpoutboundheader or fileadpateroutboundheader

Hi,
I am new bie to oracle soa suite. I was doing an excesise on file and ftp adapters.
As part of the excersise I have to edit the outbound header properties of the generated wsdl. I am unable to edit the headers.
1) Can we edit the headers generated by file/ftp adapter wizards ?
My SOA Suite: is of 10.1.3.4
Jdev version is 10.1.3.3
Thanks,
Arjun.

Try this blog
http://middleware1.wordpress.com/category/adapters/page/2/
cheers
James

Unable to edit OOAC (T77S0) entries to activate entries

Similar Messages

Maybe you are looking for