Unable to edit user properties in SBS Console (2011)

Hello,
When attempting to edit properties for a user in the SBS Console, I receive the following error: "Attempted to perform an unauthorized operation." This only occurs when attempting to edit the user account properties for this single user.
I understand that this may be a scurity permission problem in Active Directory Users and Computers, but I do not know which permission entries would cause this. Is this where I need to look or is there another way to resolve this?
Thanks in advance.
Jeff

[13284] 120106.095830.3107: Storage: Get quota for F:\Users\Shares\Alex
[13284] 120106.095830.3107: Storage: Initialize the quota manager.
[13284] 120106.095830.3575: AdminTME: Status: TaskId = StorageTasks.TaskGetUserShareFolderQuota, RootTaskId = TaskEditUser, Success: False, Warning: False, Continue: True, Message:
[13284] 120106.095830.4667: Exception:
An exception of type 'Type: System.UnauthorizedAccessException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 01/06/2012 09:58:30
Message: Attempted to perform an unauthorized operation.
This seems to indicate that the Administrator or System account is not able to access the particular folder. It may be a permissions issue where the person has modified permissions on a file or folder that is locking everyone else out. Try resetting the
permissions on this folder.
Regards, Boon Tee - PowerBiz Solutions, Australia - http://blog.powerbiz.net.au

Similar Messages

Manage Profile Services - Unable to edit User Properties or User Profiles

SharePoint 2013 - fresh site, with Mysites, and the User Profile Service running. The UPS is ran under a separate account, and the farm account has securityAdmin rights and directory replication rights.
When I enter Manage User Properties, I get a complete list of properties but no way to edit them, the same happens when I go into User Profile Properties, there is no where to edit the users. Has anyone seen this before and if so what step have I missed
in setting the UPS and MySites Up.
Both Administrator and Farm Admin have Administrator rights to the UPS Application, and it's the Profile User Service that's running at the minute not the Profile User Synchronization Service.
Any help would be appreciated.
Thanks
David

Thanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties. I can see them but not edit them.
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David

Windows SBS 2011 - I can't add a new user through the SBS Console

I have recently installed SBS 2011 and this is my first install of SBS since 2003.
After the installation I went to the SBS Console to add a new user and when I select 'Add a new user account' and base it on the Standard User account i get a message saying 'Add a New User Account failed', when i view the details for this it says "The User
Account cannot be added. Ensure that the Active Directory Domain Services service is running....
I searched the web for this and found the following which was not applicable http://support.microsoft.com/kb/958890
I then resorted to adding the users via AD Users and Computers and the modifying the value in the ADSI for msSBSCreationState to 'Created' and then it appeared in the console, i then used the console to change the user role for this account to Standard User.
But when i now click on the "Edit User Account Properties" action i get a pop up message from SBS Server saying "There is no such object on the server".
Any ideas on ow to fix this broken console would be appreciated.
Thanks,
Simon

Hi, using default names i AD will help. For everyone who lost original. grr...
http://i.techrepublic.com.com/blogs/february-2011-wstips-tip1-figa.jpg?tag=content;siu-container

Unable to edit users in UPA SharePoint 2013.

Hi,
I have created UPA service application just now, I am able to see 30 users in the site. Am able to search for the users but am unable to edit the users from the search result. Am not getting popup to edit profile after right clicking. I have provided permissions
to below accounts On UPA Databases. I have added the users under permissions option, administrators option in ribbon and provided full rights.
AppPool account user
farm admin
my admin account
Anyone have idea on what kind specific permissions I need to provide to get edit profile option.
Thanks,
Prashanth J

Is IE running in compatibility mode, and if you're accessing CA from the SharePoint server, did you run it "As Administrator"?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to Edit Template Properties

I have created an optional editable area in a DW template for
a submenu. It functions properly in DW when I create a new page and
go to Modify>Template Properties.
However in Contribute 4 (on a page created from this
template) when I go to Format>Template properties, I receive a
popup message that says "Unable to set Template Properties" ......
despite the fact that at the top of the page (in Edit mode), there
is a message that says "Some items on this page can only be edited
by setting Template Properties.
Here is a link to one of the pages
http://www.blackbusinesspro.com/events.html
Can someone tell me why the template properties have become
uneditable in Contribute 4 but are editable in DW?

Well, I just got Template Properties working .... not sure
how I did it.
The only change I made was to upload the templates associated
with the pages on this site (somehow I had neglected to do so).
Once the templates were uploaded, "Template Properties"
startedshowing up.
Go figure....!

Users created in SBS Console don't show in Active Directory Users & Computers

SBS 2011 - created users in SBS Console, but they don't show in ADUC. The newly created accounts seem to work as expected (user can login, Outlook account setup works). Have ADUC 'Advanced Features' enabled, tried searching for a user, right-click
on domain name, Find, user - doesn't find anything. Any suggestions appreciated.

SBS Users are not in the typical location in the ADUC Console, here is where they should be:
Open ADUC
-Domain
     -My Business
            -Users
                 -SBS Users

Unable to edit user information from User Admin applet

Hi
I'm unable to update user information from user admin applet. After selecting a particular user, i'm updating his full name and trying to save the details. When i click on save i'm getting below error
"Unable to execute service EDIT_USER and function addUserAttributes",(System Error: Unable to execute query 'uUsersClassifiedMarkings(UPDATE Users SET uClassifiedMarkings='No Markings'WHERE(uClassifiedMarkings is null OR uClassifiedMarkings="))'.ORA-00904:"UCLASSIFIEDMARKINGS":invalid Identifier java.sql.SQLSyntaxException: ORA-00904:"UCLASSIFIEDMARKINGS": invalid identifier)
Kindly let know what is issue or how to resolve this error

Ok,lets give it a shot. Can you please check if you have any Security Classifications added by navigating to Records->Configure->Security->Security Classification
If you do not see any entries here, then use the Add button to add the following
- No Markings
- Secret
- Top Secret
- Confidential
Now try to update the user info using the admin applet. In the edit window assign Security Classification to "No Markings" and try submitting the update. Let us know what is the outcome.
I completely agree with William on his analysis. Please try these steps if you are working on a Dev/POC instance.
Regards,
- Anand

Unable to edit User Status in Service Order

Hi Experts,
There are several service orders with user status 'Open', whereas the system status is 'In Process'. The individual items are either set to Completed or are Released. I am unable to change the user status from 'Open', as there are no other options available in the dropdown list in edit mode. I even tried changing the status in CRMD_ORDER and was not able to do it. I checked the configuration for this and its perfectly fine. The status profile has been maintained properly.
I tried using FM CRM_STATUS_CHANGE_EXTERN and CRM_STATUS_CHANGE_EXTERN_OW for this purpose and it still did not work. Any help/tips to resolve this will be highly appreciated.
Thank you,
Nanda

Hi Nanda,
As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
Hope this helps.
Thanks,
Samantak.

Unable to edit slide properties - Edit is dimmed

Can anybody clue me in to why my Edit button would be dimmed? None of the slides are locked. By clicking on 'Select All', the Edit button activates, but of course then I can only edit all slides -
Can someone tell me how to remove media from a slide if I can't get to the Properties of the slide??
This is driving me nuts - why can't I edit properties of slides?
Attached a screenshot.
Thanks for the vent

Poregon,
That's okay...venting is good.
After looking at your screen shot, I'm wondering how you ended up w/ the Edit button at all. By default, the Slide Manager dialog box should have only showed the "Select All" button...and then, and ONLY then, the Edit button would have appeared. And for what its worth, the default functionality of the Slide Manager is to provide slide-by-slide adjustment to it's properties such as setting the slide title, advancing by user and locking a slide, just to name a few.
The Edit button (once you've selected more than one slide) will only allow you to modify the presenter's info, lock slide and advance by user options, so it's pretty restricted in terms of the parameters you can set over multiple slides.
And unless I'm completely wrong, as far as "removing media from a slide" is concerned, that's not something the Slide Manager is capable of doing.
What you're seeing in the listing of multimedia assets in the Slide Manager dialog box is simply a visual feedback element; meaning, that the Slide Manager is just visually identifying the kinds of things that your slides are using....like audio, animation and flash files. But if you want to manage those assets, you need to look in the appropriate places...like the Edit Audio or Edit Flash dialog boxes. In order to eliminate a flash file, all you have to do is go to the slide where the flash file exists and simply delete it from the slide. Same thing goes for animations; and since those are PowerPoint items, that's a simple matter of eliminating any custom animation applied to objects and elements on your slide(s). As for deleting audio, that's slightly tricker, because you have to use the Edit Audio dialog box....and from there you can cut audio or replace an audio segment with silence. In a worst-case scenario, you might find yourself having to delete the slide that contains audio you want to eliminate...only to recreate that same slide, so that you end up with a slide that doesn't contain any audio at all.
Hope that helps!
Rob
http://www.robrode.com/yabb/

Unable to edit file properties in Search results

When I access a folder normally, I'm able to update a file properties but if try the same from the search results the dialog is read-only. I also can't open the properties dialog from Windows Photo Viewer, if the picture was opened from the search
results.
An example of the issue is if I search for pictures with a rating i.e.
type:jpg rating:1
I can't change the rating of an incorrectly marked jpg without going to it's folder and right clicking on the file directly.
I've tried rebuilding the search index but this hasn't fixed the issue.
Is anyone else having these issues?
Martin Cairns Microsoft Certified Master: SQL Server 2008

media files have more sophisticated properties like song name, movie title etc.
windows is able to search some fields but not all of them
if you need that level of sophisticated file management, you may be stuck to develop one to your needs
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Unable to edit Outline in EAS WEB CONSOLE after JDK updated to 1.7.0_07

Our windows infrastructure team upgrade JDK to 1.7.0_07 company wide. After upgrade I can login into the EAS console and do operations like searching for members, opening & closing outlines, looking at rules, calc script etc. But I cant add new member in the outline.
When I try to edit the partition it gives the option to "repair or delete".
Everything works when jdk is brought back to 1.6.0_29
As per support matrix it says it support Oracle JDK 1.6.0_21+
Due to company security policy we need to be at jdk1.7+
Anybody has come across this issue.
thanks

Yes there are problems with EAS and JDK 1.7 so you will probably need to stick with the supported version.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to Edit User

Hi,
I didn't have any problem creating new users in Portal using the Portal30 administrator id. But I when try to Edit the existing users by selecting a User from the list and clicking on the Edit button, all I get is the HTTP 404 Not Found with the URL of:
http://xxx/pls/portal30/PORTAL30.wwptl_ls_admin.find
Via PORTAL30 schema, I verified that pacakge wwptl_ls_admin is valid and has the FIND as an external procedure.
Does anyone know what the problem might be? Thanks. Binh.

[13284] 120106.095830.3107: Storage: Get quota for F:\Users\Shares\Alex
[13284] 120106.095830.3107: Storage: Initialize the quota manager.
[13284] 120106.095830.3575: AdminTME: Status: TaskId = StorageTasks.TaskGetUserShareFolderQuota, RootTaskId = TaskEditUser, Success: False, Warning: False, Continue: True, Message:
[13284] 120106.095830.4667: Exception:
An exception of type 'Type: System.UnauthorizedAccessException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 01/06/2012 09:58:30
Message: Attempted to perform an unauthorized operation.
This seems to indicate that the Administrator or System account is not able to access the particular folder. It may be a permissions issue where the person has modified permissions on a file or folder that is locking everyone else out. Try resetting the
permissions on this folder.
Regards, Boon Tee - PowerBiz Solutions, Australia - http://blog.powerbiz.net.au

Unable to Edit Title Properties

I've never ran into this issue before, but I'm in the title designer in Premiere Pro CS6 and cannot make any changes to the font color/shadow/anything. I'm sure there's a simple fix but it's really stressing me out trying to figure it out.

Hi,
Please check this blog regarding CC application and OS X Yosemite.
http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
You can also, try the step mention below and check if it helps.
Go to Documents\Adobe\Premiere Pro\8.0\Profile-CreativeCloud-\Styles and remove the workingset.prsl from there and move it to desktop. Make sure Premiere Pro is closed.
Regards,
Vinay

Editing image properties with BC Console in any page content causes IE to crash

This has been an issue for some while now and I have just today been advised by support that this is a known bug.
For anyone else's reference as I could find none myself, this is already identified as a bug and is currently in the list of bugs to be fixed. The bug number is 3697491.

Sorry folks... that is in IE10 and IE11... it would seem that this has been hanging around for a while...

How to edit contacts in Unified Contact Store in outlook or owa for users who use Attendand Console?

Hi all,
We have Lync server 2013 with Exchange server 2013 and "Unified Contact Store" configured and working. unfortunately our reception staff who use the Attendant Console are unable to edit their contact list (this is normal as 2010 clients do not
support UCS).
According to Microsoft notes that I have read we should be able to edit the UCS contact lists in OWA, Outlook, or Lync 2013. I can get reception staff who normally use Attendant Console (AC) log in to Lync 2013, arrange their contacts then go back to AC
- this works fine.
However as reception staff already have outlook, I would like to enable these users to be able to edit their contact lists in outlook or OWA. Does anyone know how to do this? I can't find any contact list in outlook that relates to the contact lists
in Lync.
Simon.

Hi,
For deploying Unified Contact Store, the users must log in with Lync 2013 at least once.
More details:
http://technet.microsoft.com/en-us/library/jj204963.aspx
Kent Huang
TechNet Community Support

Unable to edit user properties in SBS Console (2011)

Similar Messages

Maybe you are looking for