Unable to enter a negative amount for payment

I am trying to enter a negative amount for payments under order items, but I keep getting this error message:
"The minimum accepted payment amount for 'Financing' is '0'. Please enter an amount greater than '0' to continue.(SBL-SFS-00167)".
The payment method & type I'm using here is "Financing" & "CareCredit". But, when I enter the payment method & type as "Credit Card" & "Visa", I can enter a negative amount without any errors.
I think this requires some configuration to override. Can anyone help me with this issue?
Thanks,
Raghu

Hi,
It's known bug.
Bug number is 10499290.
Visit/contact oracle support for more information.
Good luck
T.Abed

Similar Messages

  • Dealing with negative amounts in payment proposal runs in f110

    Hi Techies,
    In the payment proposal run through f110 transaction is it possible to raise an exception and show the negative amounts seperately?

    Dear Ashok,
    The scenario is that during the payment proposal run,
    if there are two amounts with different due dates, say
    10.07.2008     8900 euros to pay
    20.07.2008     -800 euros ( the total of the documents at this due date is minus than zero)
    Now the program gives one record which says 8100 euros to pay.
    But our requirement is that, insted of displaying a single record that adds up the amounts, the negative amount is to be shown seperately like this:
    Due date      10.07.2008     8900        euros to pay
    Due date     20.07.2008      -800     Exceptions
    As this is a standard SAP functiionality, i would like to know any possible ways to achieve this requirement.
    Regards,
    Madhuri

  • Unable to manually change the amount for condition type PB00

    Hi Gurus,
    My client is using ECC5.0.
    Here when I try to change the amount for condition type PB00 using transaction ME22N, I am not able to change the value. I donu2019t get any error, but as soon as I change the value and press Enter the system replaces my entered value with the original value.
    Confusing part is that I am able to change the amount of condition price PB00 manually using transaction ME22. I donu2019t have any such problems there.
    Also I am able to manually change the amount of condition type PBXX using ME22N.
    Only in the case of PB00, if I use ME22N to manually update the amount I am not able to change it.
    Kindly help me, to find a reason as to why this could be happening, and correcting if possible?
    Thanks in advance,
    Imran

    Hello Imram,
    The purpose of maintaining 2 condition types  ie PB00 and PBXX in  a pricing procedure is that PB00 is automatic gross price determination and PBXX is manually giving gross price.
    If you go to T.Code : M/06 and check the condition types, you can see that PB00 will be having an access sequence but not PBXX.
    So if you have to manually give the gross price, you have to use PBXX.
    Regards

  • Unable to enter multiple Schedule lines for BOM material in Sales Order

    Hi All,
    We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
    The schedule lines are greyed out, user was able to add schedule lines earlier.
    I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
    Please provide a solution for this.
    PFB link in which similar situation posted in this community but the final resolution method is not discussed.
    http://scn.sap.com/message/13201504#13201504
    Regards,
    Samiksh

    Hi Samiksh,
    Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
    or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
    With regards
    S.Siva

  • Unable to enter "QA OK date" for any Support Notification

    Hi ,
    We are not able to enter "QA OK date" for any Support Notification in solution manager.
    Recently we have migrated the instance from Windows to  HPUX. After the migration this problem occurring.
    Any idea?
    Regards
    Santanu

    Hello,
    If  the code you need to enter are numbers, you need to press the "function" key first (in the bottom left corner of the keyboard).
    Hope this helps.
    Regards.
    C3-00 V 08.63 25-03-11 RM-614 Variant: 00.00

  • FB05 Batch Input / Call Transaction - Does not select amount for payment

    Hi,
    When I launch the FBWD transaction (returned bills of exchange), the call transaction for G/L account postings is in error. So the FBWD automatically creates a batch input, but when I tried to launch the batch input, it remains unsuccessful.
    So I launched the BI in foreground, I can see that the first steps of the account postings are OK, but the BI stops when assigning the payment amounts : the BI found the different postings to clear, but it waits to enter the payment amount.
    Manually, I just have to click on 'Accept' or enter the payment amount and click on 'Continue'.
    => Is there anything to do so that there is no payment amount to fill? (there should be something because the FBWD is a standard transaction, so it should work!!)
    Can you help me on this?
    Thx

    Hi.
    Yes the issue has been resolved.
    You just have to configure your master record (FS00) by ticking the box 'relevant to cash flow' (XGKON).
    Hope it will help you.
    Bernard.

  • Production order with negative amount for settlement in to Material for MAP

    Hi All,
    When I am trying to settle some production orders, it is giving me an error "Moving average price for material is negative" and doesnot let me settle them. we have maintained our materials at MAP and settle our production order variances to material to adjust its MAP. In these orders, it is trying to settle negative value, which is greater than the total value of the stock of materials and if settled leaving some of the stock with negative value. does any body has this situation and what would be the solution for this ?
    Thanks
    MKR

    Hi,
    This is Pavan Fronm IBGroup Rajnandgaon.
    To My Knowledge,
    When U Settle the Production Order, the Diffence Between the Target cost and Actual cost(MAP) of Finished Material hits the Material Account of the finished goods.
    Say Suppose,
    Target cost (Production Cost) =   Cost of Raw material + consumable,   =  10
                                                    Activity ( Labour, Power, etc)              =    5
                                                    Overheads.                                        =    2
                                                                                    17
    Actual Cost is ur Finished Material (MAP). = 18
    CASE 1:
    Now the system calculate the difference as 17 - 18 = -1 Rs , it try to reduce from Material Cost,
    Now in case if Material has the stock say 1 unit.
    it will reduce the cost of material by 1 rs in Material Master.
    If the Material has no stock , as we know the system try to reduce the cost from zero stock tends to
    give us a message saying
    MOVING AVERAGE PRICE OF MATERIAL IS NEGATIVE.
    CASE 2:
    If Target - Actual is say +1 RS it increases the material price to 1 Rupee, if stock is Zero , then 1 Rupee
    hits the Price Difference
    CASE 3: *STANDARD PRICE INDICATOR*
    In case of Standard Price indicator Every thing beyone the Material Price , whether respect to negative
    variance  or positive variance hits the price difference.
    So I request u to settle the order if u use MAP for Finished goods befor dispatch of finished good to calculate actual production cost for ur finished material..
    We can Also use MR21 for price change if the stock has dispatched befor settlement, but it is not suggestable to my knowledge hence ur material wont carry actual production cost if that is thae case.
    Please Correct if I m Wrong.
    Regards
    J .K .PAVAN KUMAR
    SAP PP-PI Consultant
    Edited by: PAVANIDLUR on Mar 30, 2009 9:05 PM
    Edited by: PAVANIDLUR on Mar 30, 2009 9:09 PM
    Edited by: PAVANIDLUR on Mar 30, 2009 9:11 PM

  • Unable to enter text in textboxes for mac

    Hi,
    I have a site at balachadha.com which works fine on IE.
    I also have a g4 that works fine.
    The problem is that on the log in page some mac users are
    saying that they cannot enter text. This is even with the latest OS
    and browser versions. I have some encrypted html around the flash
    to prevent people from cutting and pasting images, but as I say It
    works fine on a g4 for me. Any ideas?

    Hi,
    i was ablwe to do it wwith
    Font f = new Font( "Arial Unicode MS", Font.PLAIN, 12 );

  • N8, unable to enter full WEP key for WLAN

    I have a 28 character WEP key, but my N8 seems to be limiting me to 26 characters. I've tried it a couple of times & still the same, am I imagining it???
    Any way round this?
    Nokia N8 on Belle

    there isn't a limit of 26 there unless maybe you need an update but i'd try resetting your device first, i've just had a look and i got over 30 characters before i stopped

  • Negative Amount

    I am trying to enter a negative amount for payments under order items, but I keep getting this error message:
    "The minimum accepted payment amount for 'Financing' is '0'. Please enter an amount greater than '0' to continue.(SBL-SFS-00167)".
    The payment method & type I'm using here is "Financing" & "CareCredit". But, when I enter the payment method & type as "Credit Card" & "Visa", I can enter a negative amount without any errors.
    I think this requires some configuration to override. Can anyone help me with this issue?
    Thanks,
    Raghu

    Hello,
    data in field is xx,yy.zz. having length 8.
    want to convert it to fix length with adding 00 ie it should be 00xxyyzz without , & .
    how to do that.
    Thanks.

  • Please do not enter data for payment method Cheque papel error in IT0009

    Hi Experts,
    Whenever i try to  maintain bank details infotype for payment type C(Check Papel),the  system is throwing error "Please do not enter data for payment method Cheque papel". As per SAP std, I had deleted the entries for bank key, bank account and bank control key and maintained IBAN field in IT0009.While saving i am getting the error""Please do not enter data for payment method Cheque papel" and I couldn't save the record.
    Then i  deleted the entries for bank key, bank account and bank control key and IBAN field also in IT0009. While saving i am getting the error "Fill in all required entry fields". System behaves  as if Iban a required field in IT0009. Our bank details infotype is country specific.We made it country
    specific through feature P0009 and setting in table T588M.As per our conf setting IBAN field is optional. Even though IBAN field is optional, this field behaves  as that of a mandatory field in IT0009.Iam  facing this issues only for a few countries like Spain,Italy etc.For other counties i am able to change of create Bank details record  for payment type C.
    I have checked in Payment Methods by Country in FBZP (Payment Method Classification is set to Check and BANK DETAILS box is unchecked) but still no solution. Do i need to check in any other setting.
    Please shed some light on this issue.Thanks in Advance.

    Hi Jobish,
    It's weird but I tried the below method and it works
    Here's what you can try in case you do not want to enter the bank details for payment method 'C'..
    Tcode FBZP - > payment methods by country - > select payment method as 'C' and make below changes (make a note of these changes as you will have to undo them after saving the table):
    a. Payment method by classification - select bank transfer
    b. Reqd master record specifications - check the bank details options and select the options which you want to be entered (a/c no required, IBAN rqd, SWIFT code rqd)
    Save the table.
    PA30- > Edit any record once again and save it.
    Again go to FBZP and undo the above changes, i.e, revert to the original entries and again save the table.
    Try editing the record now in PA30 and it allows to save. This is the second weird workaround that I have come across and still not sure why
    After above workaround, I didn't get any error while maintaining the record, for this or any pernr.
    See if it works.
    Regards
    Neha

  • Payment Run Error Message - Min amount for pymt has not been reached

    Dear Forum,
    The users are trying to create the payment run and in case of one of the Vendors, the amount is very small - SGD 3.00. In case of this Vendor the system is giving the error message "Minimum amount for payment has not been reached". When we look at the Payment Method in FBZP we find that the minimum amount defined is SGD 1. Even then the system is giving the error message. What else needs to be checked? Would appreciate your help.
    Thanks!
    Regards

    Hi,
    IN FBZP two place the min amount needs to be given,
    paying company code and then payment method in in company code....refer both places
    Raja.A

  • Checks for Payment "To Order Of"

    Why is it when i open the "Checks for Payment" window and click on the lookup in the "To Order Of" field i see only GL account numbers?  I am using the SBO sample company and noticed when scrolling thru the posted samples that the "to order of" field shows vendor names, which is logical.  Yet when I click to enter a new check for payment and click on the lookup i get only GL account numbers.

    Hi
    Press CTRL+TAB instead of tab at the field " To Order of ' Your problem wll be solved .
    Thank you
    Bishal
    Edited by: BIshal Adhikari on Feb 12, 2009 2:31 PM

  • 1099 amount for partial payments

    I have a scenario where one invoice can have multiple line items and only one of the line items is subject to withhold tax. For ex: one invoice is making payment for rent, and other services. But, only rent should be able to print on 1099..
    I have tried the following..
    1)If i process the items separately, it would still pick all invoice payments based on vendor master record settings for with hold tax.
    2) If i apply disc/fixed calculations for tax type, it would apply for all vendors. Besides this, the client does not have a fixed amount to be with held based on payment amount.
    Please help.. how can I accomplish this..
    Regards,
    Sri

    Open with hold tax FC field to have the vendor enter the total amount. This is the amount it would print on an invoice

  • Paymont form via fpl9 for negative amount

    Hi,
    our customer wants to generate a payment form also when the account balance of the customer is negative.
    however, I'm getting an error message that:
    Creation of payment form not possible, amount is negative
    Message no. >6397
    Thanks,
    Vered

    Hi Vered,
    If I'm not mistaken (and I don't think I am ), that message comes from Function module FKK_SAMPLE_0756 - "FI-CA Correspondence - Sample Module for Payment Form Request".
    To override this bit of SAP standard logic, to the very least you'd have to program and assign in FQEVENTS own function module (without the check on negative Amount) to FI-CA Event 0756. We don't have payment forms for negative amounts in our system, but I believe it's doable - the rest of standard logic should function OK with negative payment amount.
    cheers,
    Janis

Maybe you are looking for

  • Notifications on iOS5

    My notifications from Facebook and twitter or echofon won't appear or notify me at all. I tried restarting my phone for a lot of times. I checked my settings and everything is fine, but it really doesn't want to send my notifications. Plus, the pop u

  • How to SQL*loader to skip some columns from the source file?

    I am using oracle9i sqlldr to load some .csv files into db. If I want to skip the first two columns in the source file, can I do that? If yes, how should I specify it in the ctl file? Thanks Wendy

  • How do you delete a photo album on new iPad?

    Need help to delete a photo album.   Also, is there a way to easily select more than one but less than all photos in an album?

  • Document date in MIGO takes any date in past and future

    All SAP Gurus, We have  a problem with Document date in MIGO taking any date in past and future. We want to restrict this date, although this (document date) has no relation with posting of the document. Can it be done? Regards,

  • New 9.2 install into G3 B&W 350 mHz desktop......

    Good morning. I need to start out fresh with a new-to-me 350 mHz G3 B&W. I have a "retail" disc of 9.2. I would like to completely erase the boot drive and install a fresh OS 9.2. Can anybody remind me how to do this? The computer currently has a muc