Unable to find blocked documents in /N/SAPSLL/MENU_LEGAL
Hi Experts,
I've used the following transaction for GTS Menu: /N/SAPSLL/MENU_LEGAL where I selected Sanctioned party list screening Tab selected Display blocked documents under Documents. But, I did not find any blocked sales documents which I created. Kindly advise me is there any settings to be done?
Regards,
Ayusri
Hi ,
Can you help understand the steps to confirm that the document was blocked... Ideally , a blocked document will appear under the report.
You need to first confirm that the document came into GTS.
You can actually check the current status of the document in "Display All Documents " section available under the same navigation path.. The log will tell you whats the current status of the document.
The "Audit trail for document" can confirm if this document was ever blocked and further steps carried on the same.
Thanks
Jasmit
Similar Messages
-
I typed a 10 page paper. And when I went to submit it to my class online the document was grey and it had no information and it wouldn't let me open it; like it was corrupted. When I do click on it, it says that Microsoft Word is unable to find my document.
When I click would you like to locate it yourself, it brings me to all my documents but it is no where to be found on my computer. How do I retrieve it?Hi Jessica,
From where did you open the file for editing originally? Have you saved it properly before you submit it?
As Paul mentioned above, in some cases, corrupted documents are rarely recoverable. Do you have a backup of that file? Or elaborate a little bit about your situation for further assistance.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Unable to find payment document.
Dear Gurus,
Recently it happened that a user ran F110 for few vendors. Three of these vendors were part of two different F110 run, both run by the same user (with a time gap of 5 min). However, a payment document has got created in each payment run.
What I mean is for the three vendors who were part of both the payment runs I can see two payment documents per one open item- i.e. one ZP document in each payment run. I went through the Payment Run Log to check that I was looking at things in the right manner and confirmed the above. Even if I consider that both payment documents might have paid two different accounting documents, how is it possible that a "ZP" document created during payment run is not visible through FB03 or FBL1N.
The error message I am getting is "Document number does not exist in company code XYZA or has been archived".
However, though I am able to see one of the payment documents through FBL1N or FB03, I am unable to find the one created in the second payment run.
Could any of you kindly guide me as to what is wrong or what I could have missed??????????
Thank you guysDear Mr. BIANCOTTI,
Thank you for your kind reply.
I have checked the REGUP & REGUH tables. The payment documents that appear in the F110 payment log appear there as well. It further clears the earlier point that I made in my previous post - there are two payment documents (and even two IDoc numbers) per accounting document for those vendors.
Tables BKPF & BSEG only has those documents which I can trace through FB03.
If you think I might have missed somthing else, kindly let me know.
Thank you -
Unable to find XML document from class path resource
Hi,
I am trying to learn spring and wrote my first class today. I added all the jar files to the lib folder and created all the classes. When I try to run the client program I get
[INFO] XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [MorningGreeting.xml]
org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [MorningGreeting.xml]; nested exception is java.io.FileNotFoundException: class path resource [MorningGreeting.xml] cannot be opened because it does not exist
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:180)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:148)
at org.springframework.beans.factory.xml.XmlBeanFactory.<init>(XmlBeanFactory.java:73)
at org.springframework.beans.factory.xml.XmlBeanFactory.<init>(XmlBeanFactory.java:61)
at com.training.spring.greetCustomers.EnterTraining.main(EnterTraining.java:22)
Exception in thread "main"
I have my client, interface, XML file all in the same package com.training.spring.greetCustomers. I could not understand what I am doing wrong?? Can you please help me.congratulations on deciding to learn spring. that's a smart thing to do.
stop assuming that you did it correctly. the xml file is not in the classpath. when you get it there correctly, spring will find it.
you have the source files and xml in that directory, but where do the .class files end up when you run them? does the xml config end up there, too?
remember, the xml config should be in the directory where the root of the package hierarchy begins, not down where the .class files are.
% -
Unable to find blocks to check off on downloads service agreement
I choose a download and say to install it and then under the choices of service agreements and despite scrolling throughneach of these voluminous documents, not one had a spot to mark agreement
It might help if you say what download initiated your problem and list the different service agreements you were presented with.
-
Spotlight can't find a document
Hello,
I'm using OSX Snow Leopard. Spotlight was unable to find a document in a folder. It found several others that have almost the same name, but not the one I was looking for. By scrolling down in the finder window I found it without spotlight right away.
To better explain my problem:
I was looking for a document that was called "Paperless". Spotlight found several document in different folders like "Paperlessone", Paperless2" etc. But not able to find "Paperless"
I checked the Spotlight options and it says, that it is looking for everything.
Has anyone an idea, what the problem was and how it could be solved.
Thank youLooking for everything is meaningless. Spotlight indexes, most, but not all files/folders. What you have to ensure is that it reports what's in its index. For that, you have to expand the search criteria. Peruse http://www.pinkmutant.com/articles/Leopard/leospot.html for a Spotlight tutorial.
-
Unable to find this Oracle document ID 1277924.1
Hi All,
Unable to find the below document provided by Oracle Support
WebCenter Page Hangs with Web Page Layout Components Referring to JSF Pages (Doc ID 1277924.1)
Any help will be appreciated.
Thanks,
SomnathUnable to find the below document provided by Oracle SupportMe neither. Just tell support to provide you more information.
-
I am trying to convert a PDF to a Word document using Acrobat Pro 9 but am unable to find "Content to edit" under tools. Do I need a newer version?
Acrobat 9 Pro (not Standard) can export ("convert") PDF to Word, RTF, or other text formats.
Click-path: File - Export
Take your pick.
With install of Acrobat 9 the Help PDF is installed also.
From the this PDF's Bookmarks expand Chapter 5's bookmark and select "Convert PDFs to Word".
Be well... -
Display blocked document SPL - unable to to SPL check
Dear friends,
I have a blocked sales document in "Display Blocked Documents" in SPL area. I can search on the reference number and i got one record. I selected that and try to "Start SPL screening". It says "Unable to select any data (see long text)". Can you please tell me what could be the problem.
thanks in advance.
Thiru...
Edited by: thirumal gunukula on Mar 5, 2009 2:54 AMHi Thiru,
please check your customizing:
TA spro->GTS -> Compliance -> SPL service- > Control setting for SPL -> Document screening strategy.
You can select if you want to rescreen all addresses or only changed addresses.
I assume that the address was not changed manually but system is defined in that way... -
Syncing my contacts with Google Mail fails when I use gContactSync. Says "Warning: gContactSync was unable to find a token for one of your accounts." plus more text. When I proceed to refresh token as instructed, it says "Ooops, you have cookies blocked", or similar. I don't have cookies blocked.
I do,however, use a VPN -- could than be an issue and if so -- what to do?
PatThese are Thunderbird cookies.
See http://en.flossmanuals.net/thunderbird/security-options/ -
where can I find document I tried to download?
Mac OS X
And I had clicked on the square that had doc to download/copy & no could find in documents (which are not chronological but ridiculously alphabetical!! nyhow , no matter where I clicked - no luck. Emailed it to my son, he did it successfully! The one spot o guess I failed to click was the space to R of download pic, & he did it on my machine & it worked! So shoulda clicked that spot!! In
Rante I was getting nowhere clicking on help spots for Adobe, etc!!! A few Mac friends offered long distance advice, anyhow all is well now!
Thank u for checking up. You are first I've heard from! Arlene
Let there be peace on earth and let it begin with me...... -
Unable to find partner function for SPL screening
Hi Guys
We are trying out the SPL functionality for our Client, We are in the Preliminary stages and have just started the Intial Configuration
The problem comes is the Document in ECC is getting blocked and is working as per functionality
But when in come in the GTS system and check the Documents via (SPL > Display all Documents) in the overview menu, and go ahead and check the Log, it shows an error stating
"Unable to find partner function for SPL screening"
I have checked the configuration and The partner structure, Functions and Assignment are all done
Can the experts help in getting a small checklist which I should do a check through in the configuration/user side, which can trigger this error message?
Thanks
Regards
Carl RayHi Carl,
Did you load the SPL List for Screening? Prior to SPL Screening, we have to create Index for SPL Screening. Please follow the following steps and then re-check the document
SAP GTS Area Menu (/SAPSLL/MENU_LEGAL) -> Sanctioned Party List Screening -> Master Data. Perform the below steps in sequence.
Step 1: Reset Buffer
Step 2: Generate Comparison Terms
Step 3: Aggregate Comparison Terms
Step 4: Comparison terms for Business partners
After doing the above steps, then do the following step
SAP GTS Area Menu (/SAPSLL/MENU_LEGAL) -> Sanctioned Party List Screening -> Logistics -> Check against updated Sanctioned Party Lists -> Check Business partner addresses
After performing the above steps, then re-check the document.
Let me know if the above solution help or not
Regards
Pradeep -
Unable to display customs document in SAP GTS
Hello,
I am using SAP GTS 7.2 Compliance services. SPL and Embargo services are working well (I am not using License determination).
Indeed, when I save a sales order in ERP, it is effectively checked for compliance, as I receive a message when it is blocked by GTS..
In GTS, I can check that concerning business partners are effectively blocked, using:
"Display Blocked Business Partners" and "Display Business Partners with Embargo Situation".
But I cannot display any customs document in SAP GTS, using transaction /SAPSLL/CUHD_DISPLAY (Display all documents) or SAPSLL/CON_BLOCKED_DOCS_EXP (Display blocked documents).
I get the following error message "No data was found for the selection criteria specified".
As I understood, SAP GTS performs the compliance checks not on ERP documents but on corresponding GTS customs document. Thus I guess they are effectively created somewhere! If it was not the case, I guess the process should not work.
When I look in the audit trail of SPL for documents, I can see all the SPL checks that have been performed. Looking in the corresponding table "/SAPSLL/SPLAUD", I can even find the numbers of the different customs documents...
But there is nothing in table "/SAPSLL/CUHD", where they should be copied... The only entries I found concern biling documents that were transferred for customs purposes...
Could you please help me on this matter?
Many thanks,Hi Sameer,
Thank you for your fast answer. I checked in the debug mode creating a breakpoint at statement RFC and it effectively stops at RFC /SAPSLL/API_6800_SYNCH.
But when I check the log in transaction SLG1, nothing appears concerning /SAPSLL/API_6800_SYNCH.
I think the customs document is effectively created in GTS as I can see it has a number assigned in the audit trail for SPL screening. And compliance services work.
Though when going through the transaction of displaying all documents in GTS there is nothing. Table "/SAPSLL/CUHD" is empty (except some billing documents that were transferred for customs purposes).
This is really weird... Anyway, thank you for your help.
Kind Regards, -
Unable to find any active legal regulations for determination proc. "TEST1"
Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
CarlHi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl -
Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING
I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64
Maybe you are looking for
-
Can't access IPhoto after upgrade to Yosemite
I just upgraded from Snow Leopard to Yosemite and can't access iPhoto. I've tried to install the upgrade, but it just sits there saying Installing, but nothing is working. Tried the IPhoto Upgrader without success. It says that it was not necessar
-
Why are video production apps not included in Creative Cloud membership?
I took up the offer of getting Creative Cloud cheap(er) for a year (I have a registered copy CS4 Master Collection). However, when I go to the Creative Cloud app download page or the Adobe Application Manager (see below) I am only able to download a
-
Usage time is greatly inflated
I have my phone set to auto-lock with a passcode after one minute and my email checking set to "manual". After fully charging my phone overnight my Usage and Standby counters were reset to "0". I briefly checked my numbers before leaving the house an
-
Abap hr standard screen question
Hi, I want to learn if it is possible to create a screen at which we can get datas as we get from standard screens at hr. I mean can we get data directly as we get by using 'get pernr' without using where condition at a infotype which we created. Edi
-
Hello Folks, I am wrapping a windows .LIB file. There are some CALLBACK functions defined in this...Can anybody tell me how do Forte handle these callback functions and how to define the 'C' interface for them in forte?? Any kind of clue would be ver