Unable to find Cube / Query in Catalog (Designer)

Hello,
Our current environment consists of BW Queries which are access by BO Universes. When creating a Universe we were able to see all queries but since we did some changes to the MP and cubes we don't see the queries anymore from BO Side.
Also the current reports fail with an error "Unable to find Cube <QueryName> in catalog".
The queries used in the universes are still visible and accessible in BEx Analyzer.
What I tried so far (with a super user) is:
1. Generate query again -> no change
2. Save the query again -> no change
3. Remove the flag u201CAllow external Access to this queryu201D, save query and flag the option again -> no change
4. Activate the MultiProvider again -> no change
5. Copy the query to another query u2013
-> New query is accessible. This means the MP and cubes are not the reason. It seems like the query is gone in an inactive modeu2026
6. Used BAPI BAPI_MDPROVIDER_GET_CUBES to get the list of accessible queries.
-> I see the same list as in BO. Most queries are missing. The ones that are in the list disappear whenever we try to access these queries from BO.
Did anyone encounter the same issue and was able to solve it?
Environment: SAP BI 7.1 EHP1 SP5, BO XI 3.1 SP2(1.7).
Thanks in advance.
Manu

Hi Manu,
your are talking about universe designer here - right?
We have the same behaviour currently in Crystal 2008 designer and universe designer.
In both we can see the same but not the complete list of queries.
We made sure the "allow external access" option is set in BEX.
We resolved both issues with same root cause : adjust Query properties -> Req. status -> ...
Pls refer to thread Unable to find BW Query while creating connection with universe designer as well - thanks Ingo !
- logon to the SAP system
- start transaction RSRT
- enter the technical name of the BW query in the syntax CUBE/QUERY
- click Properties
- set the second item called Req.Status.
- set that one to 0
Let us know if this helped !
Holger
Edited by: Holger Brasch on Mar 26, 2010 11:58 PM

Similar Messages

Unable to find BW Query while creating connection with universe designer

Hi colleagues,
I've got BOE XI 3.1 SP2, Integration for SAP 3.1 SP2 and the following inssue )
Some of BW queries that were previously released for external access and succsefully used for WebI reports now cannot be find while creating a connection in universe designer. Those are still releasde for external access but I'm not able to find some of them in the list, tried search as well.
Has anybody faced the same problem?
Thanks

Hi Ingo
SAP GUI               710 Patch 15
BI Components      7.10 Patch 1001
BW 3.5 Components     3.50 Patch 6
Actually as I figured out there were some reasons to manualy set req.status to 7 for that info-provider
I used massive regeneration for needed queries eventually,
BR Max

Unable to find the query

hello all!!!!!
i had posted a query in the last fortnight and i dont remember the date. the subject was "how to deploy an application developed in JDeveloper". i have gone through 12-13 pages but could not find it. i have to go through the answer once again. how can i search for that query? i did not find any search option for the threads.
please help

Do you mean this:
deploying a web application
You can just click your own name on the left of your post and you see all the latest posts you did.
Regards
Edit: John was a little faster then me :-)

Error - Unable to find the cube in catalog in Webi Report

Hi All,
We have a WEBI report built on SAP BW OLAP universe. The report is accessible from a user who has SAP_ALL authorization. However, a User role created to access and refresh the same report is giving the error message as below.
'' Unable to find cube <Multiprovider> in catalog $INFOCUBE (WIS10901)''
I have added the authorization object for BW workbench object Multiprovider and provided authorization. The same was tested in BW environment as well. However, the report could not be refreshed in BO WEBI.
SAP BW 7.01 and BO XI3.1.
Anybody who can help me on this? It could be that some authorizations are missing . But not sure how to trace what are missing.
Thanks and Regards
Srinivas

Try searching for the InfoProvider/query in the transaction MDXTEST with the test user, you could get more detailed error messages there.
Here you will find how to activate traces on the BO side:
FEATURED EVENTS
But frankly speaking, I think BW traces will be more accurate in your case.

Unable to find the transported query in quality

hi experts,
i have modified one query in development according to client requirement and it has transported to quality, but i am unable to find that query in quality, but basis consultant successfully transported.
what is the problem,
pl help me,
thanks in advance,
venkat.

Hi,
Input the name of the query in Query Designer wrt the quality system and try to display the same.
BR/
Mathew.

Unable to find the universes in the Query Browser Panel of Dashboard Design

Hi Experts,
Can any one please help me out, as I am Unable to find the universes in the Query Browser Panel of Dashboard Design Tool.
Thanks & Regards,
Shivani
Edited by: Shivani Yemula on Jul 19, 2011 4:40 PM

Hi,
I got the same problem recently in BI 4.1 Platform and all the permissions were already set, I mean on the universe and all others which are required but I found there was some problem in Dashboard Cache server, when I restarted that it worked fine ...
I was able to see the universe once I restarted it. I was getting a Java unable to invoke object Error..
Thanks,
Vamshi

"Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

Hello Everybody,
I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have the following settings in the PP Report:
Server Mode: SharePoint Integrated
SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
Document library : Documents (selected from drop down, my report is deployed to document library)
Report : report.rdl
When I select the report from drop down list its giving the error in a pop up message box as "Unable
to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
When I open the report directly from documents library its working fine and even it is working fine (
when I deployed the report) but the issue is parameters are not showing.
Any idea? Please help.
Thanks in Advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to find a qualifications catalog for the root object specified-ESS

Hi SDN,
We are getting following exception Unable to find a qualifications catalog for the root object specified when click on Add New Skill in Skills Profile, ESS . It is working fine , if user is assigned sap_all role. This is issue with permissions. Which role need to be assigned to work with Skills Profile in r3. Please help me out.
regards,
Sree.

Have a look in table T77S0 for an entry called QUALI ESSST and make sure the object ID stored there matches the appropriate node in your qualifications catalogue.
This setting is designed to be used for restricting ESS users to a particular part of the Quals Catalogue.
If the table entry was configured in your development system, it may not match the obect numbers in your production system.

Unable to find key figure attribute in the cube

Hi all of you,
I am struggling while working on this "Display Attribute". Please read this and help me out.
I want to create attributes and then load data into a cube.
I had created an InfoArea IA_ATTRIBUTES.
Under this IA_ATTRIBUTES I created an InfoObject Catalog IOC_DISPATTR.
Under IOC_DISPATTR I created an InfoObject ZCUSTNUMB which is my primary key.
After defining the ZCUSTNUMB I clicked on the Attributes tab and entered the other attributes like ZCUSTNAME, ZCUSTADDR, ZCUSTREGI, ZCUSTLOCA, and ZPRICE. All of these attributes except ZPRICE are characteristics WHILE ZPRICE is a keyfigure.
I've also made sure that the Attributes only check box is not checked for all the characteristics.
I then activated the InfoObject ZCUSTNUMB and came back.
Now I created a cube DISP_ATTR. I clicked on the InfoObject Catalog button and selected the above mentioned catalog IOC_DISPATTR and transferred the IOs from the template into the structure.
Now when I transfer IOs in this way all the IOs both characteristics and key figures should come into the structure of the cube isnt't. But only characteristics have come and the keyfigure ZPRICE hasn't come.
Moreover when I hit on the key figures tab and hit on the find button and find ZPRICE I am getting a message saying "No (further) object found". So when I hit on the create button and create a key figure ZPRICE I am getting a message saying "InfoObject ZPRICE already exists as Key Figure (please rename)".
However when I double click on ZCUSTNUMB which is the primary key, the screen "Display characteristic ZCUSTNUMB: Detail" opens. In this screen I find all the attributes in the attributes tab that I had defined while defining attributes including ZPRICE.
So what I don't understand is when all the characteristics IOs are visible under the characteristics tab then why am I unable to find the key figure ZPRICE under Key figures tab when I created it while defining attributes. Can anyone please explain me this situation and tell me how should I find the key figure ZPRICE so that I can go ahead and create the cube.
Lastly I want to know what are the differences between InfoObjects and Attributes. Is an attribute also an IO?
Please explain.
I would appropriately rewards your answers.
Thank you.
TR.

Hi Oscar Romero,
Thanks a lot for your reply. As per your suggestion I created another IOC FOR key figures called IOC_ATTR_KF. In this IOC I had included the key figure ZPRICE and activated the IOC.
Now I have created a cube again ATTR_DISP. On the right corner where we find 5 buttons I clicked on the InfoObject Catalog button. The screen "Select InfoObject Catalog" opened displaying the IOC_ATTR_KF that I had created earlier. When I double clicked on the IOC_ATTR_KF I got the msg asking "Do you want to transfer the IOs from the template into the structure?" I clicked on Yes. But I don't find any key figures either in the Structure pane or in the Template pane. Both the panes are empty.
I also clicked on the All InfoObjects button and searched for ZPRICE but again I am getting the message "No "further) object found". However when I try to create ZPRICE I am getting the message ZPRICE already exists.
Please explain me why this is happening like this?

Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.

Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.

Hi hanmant,
You could find GL Line item report under General ledger WOC => Reports => List=> G/L Line Item Report, but this report does not have filter parameter "Approved by".
May I know what was the use case behind "Approved by" field?
BR, Rakesh

Unable to find com.businessobjects.mds.olap.protocol.ess_japi while exporting Design Studio SDK

Hello,
I am trying to export / package Design Studio SDK, i am able to test / run it successfilly in eclipse but, getting error "Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]" while packaging design studio SDK. when i am exporting the project it is failing at 78% and getting the above error. PFA screen shoot for the same.
Detailed Error:
C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:88: The following error occurred while executing this line:
C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:2369: Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:551)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:444)
at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.GeneratedMethodAccessor200.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:392)
at org.apache.tools.ant.Target.performTasks(Target.java:413)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.eclipse.ant.internal.core.ant.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.eclipse.ant.internal.core.ant.InternalAntRunner.run(InternalAntRunner.java:672)
at org.eclipse.ant.internal.core.ant.InternalAntRunner.run(InternalAntRunner.java:498)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.ant.core.AntRunner.run(AntRunner.java:378)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.runScript(FeatureExportOperation.java:422)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.doExport(FeatureExportOperation.java:285)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.doExport(FeatureExportOperation.java:223)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.run(FeatureExportOperation.java:107)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
Caused by: C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:2369: Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]
at org.eclipse.equinox.p2.internal.repository.tools.tasks.AbstractRepositoryTask.prepareIUs(AbstractRepositoryTask.java:186)
at org.eclipse.equinox.p2.internal.repository.tools.tasks.MirrorTask.execute(MirrorTask.java:60)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.GeneratedMethodAccessor200.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:392)
at org.apache.tools.ant.Target.performTasks(Target.java:413)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
at org.eclipse.ant.internal.core.ant.EclipseSingleCheckExecutor.executeTargets(EclipseSingleCheckExecutor.java:30)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:442)
... 26 more
Thanks

Hello All,
Thanks for giving time for this thread. I have solved this issue. Actually when we create Feature Project by default all Pugins and Fregemets will be added to featured project(i guess in some eclipse version since SAP has not mentained any Note for this), we need to delete unnecessary plugins from the featured project. Just select all and right click and delete. Then again add SAP Sample SDK.
Even thought it will packaged properly and will create zip file and you will be able import it to the Design Studio but you cann't select and install it to the Plateform from Design Studio, make sure for this you have Unchecked Ckeckbox: Unpack the plug-in archive after the installation.
I think this will help.
Thanks

How to find which query ORA-1652: unable to extend temp segment by 128 in

How can i find which query caused the below error,the query is not running currently
ORACLE ERRORS IN ALERTS LOG dnb2stg3 - lnx300 on Thu Jun 17 12:10:01 EDT 2010
1 ORA-1652: unable to extend temp segment by 128 in tablespace TEMP_SCHED
SQL> select inst_id, tablespace_name, total_blocks, used_blocks, free_blocks from gv$sort_segment;
INST_ID TABLESPACE_NAME TOTAL_BLOCKS USED_BLOCKS FREE_BLOCKS
1 TEMP 638336 0 638336
4 TEMP 565760 0 565760
4 TEMP_SCHED 16776704 0 16776704
3 TEMP 484864 0 484864
3 TEMP_SCHED 0 0 0
2 TEMP 455808 0 455808
6 rows selected.
SQL> SQL> SELECT S.sid || ',' || S.serial# sid_serial, S.username,
2 T.blocks * TBS.block_size / 1024 / 1024 mb_used, T.tablespace,
3 T.sqladdr address, Q.hash_value, Q.sql_text
FROM v$sort_usage T, gv$session S, gv$sqlarea Q, dba_tablespaces TBS
4 5 WHERE T.session_addr = S.saddr
6 AND T.sqladdr = Q.address (+)
7 AND T.tablespace = TBS.tablespace_name
8 ORDER BY S.sid;
no rows selected

Hello,
You may try to catch the SQL with a Servererror Trigger.
This link will give you an interesting example:
http://oratips-ddf.blogspot.com/2008/09/to-err-is-human.html
Hope this help.
Best regards,
Jean-Valentin

Unable to find query

Hello Experts!!
I got one issue with portals and Queries.
My user added one query/report in 'My Portfolio' of of Business Explorer of his Portal.When he is trying to view that report today,he is getting error..'500 Internal Server Error'...when I read in the error message,I found something like---'Bookmark XXXXXX doesnot exist and therefore cannot be loaded'
I asked user if he can tell me which query/report he added in his portfolio....He checked properties of that bookmark and sent me
TemplateID ....I searched on it but couldnot find any query/report in my Query Designer.....Is template ID enough for this or do we
need to ask specifically for query name?
How can we find query name of the bookmark/report users add in their personal BEx documents/My Portfolio in BEx Portals?
Do any of you have any knowledge about why this type of error occurs?
Thanks alot.
P Olin.

Hallo,
This is possible to use the [metadata repository|http://help.sap.com/saphelp_sm40/helpdata/en/4e/ea683c25e9096de10000000a114084/frameset.htm] in transaction RSA1 in order to help you in find the information that you need.
RSA1 -> Metadata Repository .
In that screen you will find a list of BW objects. In your case that you have the WEB Template ID, you can choose the u201CBex Web Templateu201D option and find user's template in the list returned. Opening that template should give you all information that you need to find the query and other related objects.
I hope this info can help.
BR,
Ricardo

Why can't I find Bex Query Designer ?

Hi,
I installed successfully SAP Netweaver ABAP Trial Version. But I can't find the Bex Query Designer. I thought it was part of SAP Netweaver ?
How can I get it ?
Thanks.

Hi,
Bex and the other tools such as analyzer and web app.designer come with SAP gui installation (while installing SAP gui you should select BW-addon ) and you can find the query designer under the following path on your computer .C:Program FilesSAPFrontEndBwwdbrlog.exe
Regards,
®

Unable to find connection 'MyConnection' for object MySetting

I have a connection string in my App.Config for Visual Studio 2012 Express for Desktop.
The App.Config and Connection String like following,
It was working to connect,
Suddenly, I got 'unable to find connection 'MyConnectionString' for Object MySetting, The Connection string could not be found, or data provider associated with Connection String could not be loaded' when I tried to config query on for Data Adapter on DataSet.xsd
files.
Any suggestions is appreciated,
Regards,
Souris,
<?xml version="1.0"?>
<configuration>
    <configSections>
    </configSections>
    <connectionStrings>
    <add name="MyProject.My.MySettings.MyConnectionString" connectionString="Data Source=MyServer;Initial Catalog=MyDatabase;User ID=MyUser;Password=MyPassword;encrypt=true;"/>
    </connectionStrings>
      <startup>
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
    </startup>
</configuration>

Keith, I can already access the hidden status page, what it is NOT showing me, is the duration of my active connection which is what I need to see.
That status page just shows me the following stats:
Configured
Current
Line Status
SHOWTIME
Link Type
Fast Path
[Go Top]
Data Rate:
Stream Type
Actual Data Rate
Up Stream
288 (Kbps.)
Down Stream
2272 (Kbps.)
[Go Top]
Operation Data / Defect Indication:
Operation Data
Operation Data
Upstream
Downstream
Noise Margin
27 dB
28 dB
Attenuation
40 dB
--- dB
Defect Indication
Indicator Name
Near End Indicator
Far End Indicator
Fast Path FEC Correction
0
0
Interleaved Path FEC Correc
0
0
Fast Path CRC Error
2
0
Interleaved Path CRC Error
0
0
Loss of Signal Defect
0
0
Fast Path HEC Error
0
0
Interleaved Path HEC Error
0
0
[Go Top]
Statistics:
Received Cells
2838470
Transmitted Cells
2336236

Unable to find Cube / Query in Catalog (Designer)

Similar Messages

Maybe you are looking for