Unable to find disk

I keep trying to sync my Iphone with my Itunes and it keeps coming up with "disk was not found" and it wont sync. I have no clue what that means or how to fix it.I have uninstalled and reinstalled Itunes even though I had the newest version. I have restored my iphone twice. i have deleted songs that may have stopped it. but It doesn't even try to sync just automatically says that it can't find the disk. HELP please!!!

In case you have still not managed to resolve this, the problem lies with those disks not being "raw". If you look at the output of blkid that you have posted, you will notice that those asm disks have a EXT2 filesystem created on them, which makes them not eligible to be asm disks. You may want to wipe out those partitions and try again. Once you have set your ASM discovery string correctly and defined UDEV rules properly, you should not be able to see those asm disks in the output of blkid command BEFORE you use them for any disk groups. After you create an ASM disk group using those disks, they will appear in the output of blkid with TYPE as oracleasm.
Hope this helps.

Similar Messages

  • Unable to find disk 2. Installation cannot continue.

    RDBMS Version: 9.2.0
    Operating System and Version: Red Hat Linux release 9 (Shrike)
    Unable to find disk 2. Installation cannot continue.
    Hello, I have been trying to install Oracle 9i Release 2 into a Red Hat Linux release 9 (Shrike) machine with no success. The installer hangs with "Unable to find disk 2. Installation cannot continue." even if it is configured in the .rsp file the parameters that specify the path to the other disks.
    In some posts I found here (in metalink) there were references to 2 different variable names: FROM_LOCATION_DISK2 or LOCATION_FOR_DISK2 and FROM_LOCATION_DISK3 or LOCATION_FOR_DISK3. Both were set. Parameter FROM_LOCATION_CD_LABEL were also set with value "orcl920" (from the disk.label) and the names of the directories where the install disks where extracted have names like Disk1, Disk2 and Disk3. (I saw in the documentation that if the parameters of the other disks, 2 and 3, were not set in the response file, the installer would look for directories named Disk2 and Disk3 in directories 2 or 3 levels above products.jar, which is located in a subdirectory of Disk1).
    I know this is not a certified combination of OS+DB but it´s just a test DB and won´t be put in production and even this config won´t be put in production in any site but it´s strange that a certification problem could raise an error in this level (what I would expect are linking and dependencies errors and not the impossibility of finding the install disks that are in the same file system and even specified by the parameters).
    Is there another way to specify the location of these disks? Through a comand line parameter of the installer, for example, an enviroment variable or even other parameters in different files....
    Thanks in advance.
    Mauricio.

    Errors "Exit Code: 6," "Exit Code: 7"
    Mylenium

  • Snow Leopard crashed : unable to find the hard drive in Disk utility

    Hello,
    A few days ago, my computer (running on Snow Leopard 10.6.3) suddently crashed (no recent update, no new software or hardware installation).
    Since then, i'm unable to start the computer. It freezes on the start screen with the apple and the loading bar. Sometimes i've got an empty folder with a question mark.
    I tried to start with the install CD, and when i select Disk utility, it only recognizes the DVD, not the hard drive (then i cannot even try to repair it).
    When i want to re-install Snow Leopard, i arrive on an empty screen on which i'm asked to choose a drive to install on. Of course as i cannot choose a drive, i cannot install.
    Finally, when i try to start with no errors (pressing Maj button when starting), i've got a kernel panic error saying "unable to find driver for this platform ACPI"
    Can anyone help me ?
    thanks in advance.

    Your hard drive has had a serious malfunction. It might be that it is software: your partition table may be corrupt. If so, this may be fixable if you take it to a local Apple certified tech. However, it is more likely that it is hardware and the drive itself has failed. I hope you have a backup. If you do, you will need to replace the drive and restore the backup to the new drive. If you don't and you have important data on that drive (and if you have important data, why don't you have a backup?) you will need to contact one of the data recovery services, such as Drive Savers or Rescuecom. Be advised that the price for data recovery starts at $200 and heads upwards really quickly, depending on what the exact problem with the drive is. I have seen data recovery charges of $3000 and more for seriously screwed up drives.
    Having a backup is a lot easier and a lot cheaper.

  • HT3275 "Unable to find backup disk" issue

    I use an external USB device for Time Machine backups, and, until now, it has always worked perfectly.  However, today when I tried to backup my files, Time Machine sent me the message "Unable to find backup disk."
    I went to the "Help" section of Time Machine and was advised to open "Time Machine Preferences," then open "Select Disk" and choose my external device from the list of "back-up disks" that would be shown.  This apparently would "re-set" my external back-up device and allow backing up to resume.
    However, when I went to the "Select Disk" section of "Time Machine Preferences,"  my external device was not even listed as a choice (i.e., I can't select the device as the place for backing-up, because it's not listed).
    NOTE:  My external device is (a) connected to my laptop (via USB port), (b) turned on & (c) not defective.  My wireless network is working just fine.
    Also, when I tested Apple's back-up drive "re-set" advice by connecting a tiny thumb-drive to my laptop (via the same USB port I had used with my external device), the "Select Disk" section of "Time Machine Preferences" listed the thumb-drive as a potential back-up disk that could be selected.
    So, why can't my external USB device be "found" by Time Machine (while my thumb-drive can)?  What can I do to fix this problem?
    Thanks!
    lisbeth617

    Sounds like either the backups are corrupted, or there's a problem with the drive, port, or cable.
    Try to repair the backups, per #6 in Using Disk Utility.

  • Can't install Mavericks, damaged disk, restore from Time Machine, unable to find destination disk. What to do?

    After downloading Mavericks, tried installing, it told me that I have a damaged disk and to restore from backup. Selected Time Machine's latest backup. Then I was prompted to select backup disk. My only option was the Mac HD icon with a "?" on top of it, unable to verify disk. With the "continue" button grayed out, I hit the back button a few times in an attempt to start over. I went back to the install page and it started installing. 40 minutes later it was up and running. Every thing seemed fine. I tried opening GarageBand, I got the spinning wheel. Then a prompt page asking me to select a language. I selected English and the computer shutdown. It being late and I being frustrated, I decided to wait until morning.
    On startup I got the message that I have a damaged disk and to restore from backup. Selected Time Machine's latest backup. Then I was prompted to select backup disk. This time there was no icon or anything to choose from.
    I'm wondering if I need to use my original Mac mini, Mac OS X install DVD, or is it time for a trip to the Apple store.
    Ideas and options welcome.
    Thanks

    It sounds as if your hard drive may have failed or may be failing. Boot your computer from the REcovery Disk by holding down the Command+R keys during the boot. From the Recovery drive you can run Disk Utility.  Once in DU select your hard drive then run "Repair Disk".
    If errors are found and repaired run Repair Disk a second time.
    If errors are found and not repaired you are going to need a more robust volume repair utiity such as DiskWarrior, TechTool Pro, or Drive Genius and an external drive to boot from to run the repairs or...
    You may be in the market for a new HD

  • HELP MY MAC IS BROKE AND WONT START (unable to find driver ACPI)

    Someone please help. I was reinstalling a printer driver and my power cut off while it was installing. now the computer wont start and i get this message below... I read to use the install dvd but my CD drive is broke and wont take cds. I did manage to hook it up to my dads computer with target disk mode so i can access files. his computer is a windows though. i do have a copy of the Leopard install cd saved as a DMG on his computer and a 8gb flash to boot it but i cant format the flash drive to be mac extended journaled GUID from his computer.IS there a program to do this???I dont know what needs to be fixed or where i can get this acpi driver? can anyone help because i dont have any money to get this fix and i need my mac for college which im starting soon.
    This is the error message
    panic(cpu 0 caller 0x004384FF): "unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1228.12.14/iokit/Kernel/IOPlatformExpert.cpp: 1407
    (That is the first line. It goes on to say...)
    Debugger called: <panic>
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    (then there are 7 lines that start with 0x2f5d3 followed by)
    Backtrace terminated-invalid frame pointer 0
    BSD process name corresponding to current thread: Unknown
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
    System uptime in nanoseconds: 180744654
    It also says 64bit mode enabled and i thought macs were 32bit.
    I also tried resetting the pvram or whatever its called and no luck
    Someone please help!!!!

    I know this isn't what you really want to hear but I'd recommend taking it in to an authorized repair location or your local Apple Store to get the Superdrive repaired or replaced so you can do an install? I don't believe you will be able load from your Dad's Window's machine. However you might be able to from an external DVD drive.
    Also I might recommend getting a UPS so if you have similar issues you will have enough power to do a proper shutdown.
    Regards,
    Roger

  • [Solved] Unable to find root device

    Hi guys,
    it's been three days now that my laptop refuses to boot with a message from systemd like this:
    ERROR: device 'UUID=xxx...' not found. Skipping fsck.
    ERROR: Unable to find root device 'UUID=xxx...'.
    You are being dropped to a recovery shell.
    That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
    But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
    I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
    In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
    It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
    However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
    [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
    [ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
    [ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
    [ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] log_buf_len: 1048576 bytes
    [ 0.000000] early log buf free: 519600(99%)
    [ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
    [ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
    [ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
    [ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
    [ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
    [ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21edfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
    [ 0.000000] On node 0 totalpages: 1997309
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12786 pages used for memmap
    [ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18360 pages used for memmap
    [ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2593.984 MHz processor
    [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
    [ 0.000028] pid_max: default: 32768 minimum: 301
    [ 0.000032] ACPI: Core revision 20140926
    [ 0.020437] ACPI: All ACPI Tables successfully acquired
    [ 0.021107] Security Framework initialized
    [ 0.021114] Yama: becoming mindful.
    [ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024297] Initializing cgroup subsys memory
    [ 0.024302] Initializing cgroup subsys devices
    [ 0.024304] Initializing cgroup subsys freezer
    [ 0.024305] Initializing cgroup subsys net_cls
    [ 0.024307] Initializing cgroup subsys blkio
    [ 0.024325] CPU: Physical Processor ID: 0
    [ 0.024326] CPU: Processor Core ID: 0
    [ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025227] mce: CPU supports 7 MCE banks
    [ 0.025238] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    [ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.026009] ftrace: allocating 20921 entries in 82 pages
    [ 0.033432] dmar: Host address width 39
    [ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
    [ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
    [ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
    [ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.033572] HPET id 0 under DRHD base 0xfed91000
    [ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
    [ 0.033573] This will slightly decrease performance.
    [ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
    [ 0.033713] Enabled IRQ remapping in xapic mode
    [ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
    [ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
    [ 0.067366] TSC deadline timer enabled
    [ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067404] ... version: 3
    [ 0.067405] ... bit width: 48
    [ 0.067406] ... generic registers: 4
    [ 0.067407] ... value mask: 0000ffffffffffff
    [ 0.067407] ... max period: 0000ffffffffffff
    [ 0.067408] ... fixed-purpose events: 3
    [ 0.067409] ... event mask: 000000070000000f
    [ 0.090846] x86: Booting SMP configuration:
    [ 0.090848] .... node #0, CPUs: #1
    [ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.111723] #2 #3
    [ 0.146545] x86: Booted up 1 node, 4 CPUs
    [ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
    [ 0.149839] devtmpfs: initialized
    [ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
    [ 0.152488] pinctrl core: initialized pinctrl subsystem
    [ 0.152525] RTC time: 14:27:35, date: 01/29/15
    [ 0.152613] NET: Registered protocol family 16
    [ 0.163220] cpuidle: using governor ladder
    [ 0.176565] cpuidle: using governor menu
    [ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.176606] ACPI: bus type PCI registered
    [ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.176776] PCI: Using configuration type 1 for base access
    [ 0.176783] dmi type 0xB1 record - unknown flag
    [ 0.190254] ACPI: Added _OSI(Module Device)
    [ 0.190257] ACPI: Added _OSI(Processor Device)
    [ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
    [ 0.527048] ACPI: Dynamic OEM Table Load:
    [ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
    [ 0.540534] ACPI: Dynamic OEM Table Load:
    [ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
    [ 0.553725] ACPI: Dynamic OEM Table Load:
    [ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
    [ 0.607146] ACPI: Interpreter enabled
    [ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.607184] ACPI: (supports S0 S3 S4 S5)
    [ 0.607185] ACPI: Using IOAPIC for interrupt routing
    [ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.608649] ACPI: Power Resource [PG00] (on)
    [ 0.620317] ACPI: Power Resource [PG01] (on)
    [ 0.640702] ACPI: Power Resource [PG02] (on)
    [ 1.401836] ACPI: Power Resource [FN00] (off)
    [ 1.401913] ACPI: Power Resource [FN01] (off)
    [ 1.401986] ACPI: Power Resource [FN02] (off)
    [ 1.402057] ACPI: Power Resource [FN03] (off)
    [ 1.402127] ACPI: Power Resource [FN04] (off)
    [ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 1.404193] PCI host bridge to bus 0000:00
    [ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
    [ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
    [ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
    [ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
    [ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
    [ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
    [ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
    [ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
    [ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
    [ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
    [ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
    [ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
    [ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
    [ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
    [ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
    [ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
    [ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
    [ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
    [ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
    [ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
    [ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
    [ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
    [ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
    [ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
    [ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
    [ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.614019] vgaarb: loaded
    [ 1.614020] vgaarb: bridge control possible 0000:00:02.0
    [ 1.614099] PCI: Using ACPI for IRQ routing
    [ 1.615308] PCI: pci_cache_line_size set to 64 bytes
    [ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
    [ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
    [ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
    [ 1.615428] NetLabel: Initializing
    [ 1.615429] NetLabel: domain hash size = 128
    [ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.615438] NetLabel: unlabeled traffic allowed by default
    [ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.617497] Switched to clocksource hpet
    [ 1.621576] pnp: PnP ACPI init
    [ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 1.621755] system 00:00: [io 0xffff] has been reserved
    [ 1.621756] system 00:00: [io 0xffff] has been reserved
    [ 1.621758] system 00:00: [io 0xffff] has been reserved
    [ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
    [ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
    [ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.001167] pnp: PnP ACPI: found 8 devices
    [ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
    [ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 2.007594] NET: Registered protocol family 2
    [ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
    [ 2.008100] TCP: reno registered
    [ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008195] NET: Registered protocol family 1
    [ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
    [ 2.024532] PCI: CLS 64 bytes, default 64
    [ 2.024577] Unpacking initramfs...
    [ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
    [ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
    [ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.341843] Scanning for low memory corruption every 60 seconds
    [ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 2.342061] Initialise system trusted keyring
    [ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.343277] zpool: loaded
    [ 2.343280] zbud: loaded
    [ 2.343434] VFS: Disk quotas dquot_6.5.2
    [ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.343557] msgmni has been set to 15200
    [ 2.343599] Key type big_key registered
    [ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.343779] io scheduler noop registered
    [ 2.343781] io scheduler deadline registered
    [ 2.343802] io scheduler cfq registered (default)
    [ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
    [ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.344363] vesafb: scrolling: redraw
    [ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
    [ 2.492136] Console: switching to colour frame buffer device 240x67
    [ 2.639261] fb0: VESA VGA frame buffer device
    [ 2.639278] intel_idle: MWAIT substates: 0x11142120
    [ 2.639279] intel_idle: v0.4 model 0x45
    [ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.639471] GHES: HEST is not enabled!
    [ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.639854] Linux agpgart interface v0.103
    [ 2.639890] rtc_cmos 00:01: RTC can wake from S4
    [ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.640037] Intel P-state driver initializing.
    [ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
    [ 2.640415] TCP: cubic registered
    [ 2.640635] NET: Registered protocol family 10
    [ 2.641104] NET: Registered protocol family 17
    [ 2.641809] Loading compiled-in X.509 certificates
    [ 2.641841] registered taskstats version 1
    [ 2.642839] Magic number: 15:558:486
    [ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
    [ 2.643157] PM: Hibernation image not present or could not be loaded.
    [ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 2.645137] Write protecting the kernel read-only data: 8192k
    [ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
    [ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
    [ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
    [ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
    [ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
    [ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
    [ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
    [ 2.657455] systemd-udevd[61]: starting version 218
    [ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
    [ 2.657510] systemd-udevd[61]: Load module index
    [ 2.657562] systemd-udevd[61]: Created link configuration context.
    [ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
    [ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
    [ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
    [ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
    [ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
    [ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
    [ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    [ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
    [ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
    [ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
    [ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
    [ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
    [ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
    [ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
    [ 2.658188] systemd-udevd[61]: Unload module index
    [ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
    [ 2.658262] systemd-udevd[62]: set children_max to 16
    [ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
    [ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
    [ 2.660575] systemd-udevd[67]: seq 678 running
    [ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
    [ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.660651] systemd-udevd[67]: seq 678 processed with 0
    [ 2.714860] raid6: sse2x1 9342 MB/s
    [ 2.771561] raid6: sse2x2 11848 MB/s
    [ 2.828260] raid6: sse2x4 13887 MB/s
    [ 2.884943] raid6: avx2x1 18356 MB/s
    [ 2.941655] raid6: avx2x2 21230 MB/s
    [ 2.998344] raid6: avx2x4 24583 MB/s
    [ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
    [ 2.998346] raid6: using avx2x2 recovery algorithm
    [ 2.998547] xor: automatically using best checksumming function:
    [ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
    [ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 2.998639] systemd-udevd[67]: seq 679 running
    [ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
    [ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.998684] systemd-udevd[67]: seq 679 processed with 0
    [ 3.031698] avx : 25444.800 MB/sec
    [ 3.034144] systemd-udevd[62]: Validate module index
    [ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
    [ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
    [ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034249] systemd-udevd[67]: seq 680 running
    [ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
    [ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034308] systemd-udevd[67]: seq 680 processed with 0
    [ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
    [ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034945] systemd-udevd[67]: seq 681 running
    [ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
    [ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034986] systemd-udevd[67]: seq 681 processed with 0
    [ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
    [ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035087] systemd-udevd[67]: seq 682 running
    [ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
    [ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035118] systemd-udevd[67]: seq 682 processed with 0
    [ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
    [ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035790] systemd-udevd[67]: seq 683 running
    [ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
    [ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
    [ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035834] systemd-udevd[67]: seq 683 processed with 0
    [ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
    [ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
    [ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035961] systemd-udevd[67]: seq 685 running
    [ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
    [ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
    [ 3.035981] systemd-udevd[75]: seq 684 running
    [ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.036004] systemd-udevd[67]: seq 685 processed with 0
    [ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
    [ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036031] systemd-udevd[75]: seq 684 processed with 0
    [ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
    [ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
    [ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
    [ 3.036165] systemd-udevd[76]: seq 686 running
    [ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036180] systemd-udevd[75]: seq 688 running
    [ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
    [ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
    [ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
    [ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036215] systemd-udevd[75]: seq 688 processed with 0
    [ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036231] systemd-udevd[76]: seq 686 processed with 0
    [ 3.036257] Btrfs loaded
    [ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
    [ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
    [ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
    [ 3.036378] systemd-udevd[77]: seq 689 running
    [ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
    [ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
    [ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036439] systemd-udevd[77]: seq 689 processed with 0
    [ 3.036457] systemd-udevd[76]: seq 691 running
    [ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
    [ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036498] systemd-udevd[76]: seq 691 processed with 0
    [ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
    [ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
    [ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036576] systemd-udevd[76]: seq 693 running
    [ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
    [ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
    [ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
    [ 3.036619] systemd-udevd[76]: seq 693 processed with 0
    [ 3.036637] systemd-udevd[77]: seq 694 running
    [ 3.036649] systemd-udevd[78]: seq 692 running
    [ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
    [ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036676] systemd-udevd[77]: seq 694 processed with 0
    [ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
    [ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.036698] systemd-udevd[78]: seq 692 processed with 0
    [ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
    [ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
    [ 3.036801] systemd-udevd[80]: seq 695 running
    [ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
    [ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.036848] systemd-udevd[80]: seq 695 processed with 0
    [ 3.036859] systemd-udevd[76]: seq 696 running
    [ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
    [ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
    [ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
    [ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
    [ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
    [ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036992] systemd-udevd[76]: seq 696 processed with 0
    [ 3.037009] systemd-udevd[67]: seq 687 running
    [ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
    [ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037048] systemd-udevd[67]: seq 687 processed with 0
    [ 3.037063] systemd-udevd[75]: seq 690 running
    [ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
    [ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.037097] systemd-udevd[75]: seq 690 processed with 0
    [ 3.037372] udevadm[79]: calling: trigger
    [ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
    [ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
    [ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
    [ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
    [ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
    [ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
    [ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
    [ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
    [ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
    [ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
    [ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
    [ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
    [ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
    [ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
    [ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
    [ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
    [ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
    [ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
    [ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
    [ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
    [ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
    [ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
    [ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
    [ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
    [ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
    [ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
    [ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
    [ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
    [ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
    [ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
    [ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
    [ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
    [ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
    [ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
    [ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
    [ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
    [ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
    [ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
    [ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
    [ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
    [ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
    [ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
    [ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
    [ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
    [ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
    [ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
    [ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
    [ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
    [ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
    [ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
    [ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
    [ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
    [ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
    [ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
    [ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
    [ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
    [ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
    [ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
    [ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
    [ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
    [ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
    [ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
    [ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
    [ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
    [ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
    [ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
    [ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
    [ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
    [ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
    [ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
    [ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
    [ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037890] systemd-udevd[67]: seq 697 running
    [ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
    [ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
    [ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
    [ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
    [ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037925] systemd-udevd[67]: seq 697 processed with 0
    [ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
    [ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037988] systemd-udevd[67]: seq 698 running
    [ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
    [ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038015] systemd-udevd[67]: seq 698 processed with 0
    [ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
    [ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038076] systemd-udevd[67]: seq 702 running
    [ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
    [ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
    [ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038106] systemd-udevd[67]: seq 702 processed with 0
    [ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
    [ 3.038113] systemd-udevd[78]: seq 703 running
    [ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
    [ 3.038143] systemd-udevd[80]: seq 704 running
    [ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
    [ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038158] systemd-udevd[78]: seq 703 processed with 0
    [ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
    [ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
    [ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038179] systemd-udevd[80]: seq 704 processed with 0
    [ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038192] systemd-udevd[67]: seq 705 running
    [ 3.038201] systemd-udevd[78]: seq 706 running
    [ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
    [ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
    [ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
    [ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038228] systemd-udevd[67]: seq 705 processed with 0
    [ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
    [ 3.038243] systemd-udevd[80]: seq 707 running
    [ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038246] systemd-udevd[78]: seq 706 processed with 0
    [ 3.038254] systemd-udevd[76]: seq 700 running
    [ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
    [ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038275] systemd-udevd[80]: seq 707 processed with 0
    [ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
    [ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038310] systemd-udevd[76]: seq 700 processed with 0
    [ 3.038325] systemd-udevd[75]: seq 699 running
    [ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
    [ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038364] systemd-udevd[75]: seq 699 processed with 0
    [ 3.038405] systemd-udevd[77]: seq 701 running
    [ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
    [ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038432] systemd-udevd[77]: seq 701 processed with 0
    [ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
    [ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
    [ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038623] systemd-udevd[81]: seq 708 running
    [ 3.038627] systemd-udevd[67]: seq 709 running
    [ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
    [ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
    [ 3.038653] systemd-udevd[75]: seq 710 running
    [ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
    [ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
    [ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
    [ 3.038671] systemd-udevd[67]: seq 709 processed with 0
    [ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
    [ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
    [ 3.038682] systemd-udevd[81]: seq 708 processed with 0
    [ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
    [ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038700] systemd-udevd[75]: seq 710 processed with 0
    [ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
    [ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038734] systemd-udevd[67]: seq 711 running
    [ 3.038753] systemd-udevd[76]: seq 713 running
    [ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
    [ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
    [ 3.038784] systemd-udevd[67]: seq 711 processed with 0
    [ 3.038797] systemd-udevd[75]: seq 712 running
    [ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038803] systemd-udevd[76]: seq 713 processed with 0
    [ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
    [ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038845] systemd-udevd[75]: seq 712 processed with 0
    [ 3.038849] systemd-udevd[77]: seq 714 running
    [ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
    [ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
    [ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038878] systemd-udevd[77]: seq 714 processed with 0
    [ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
    [ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
    [ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
    [ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
    [ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038976] systemd-udevd[75]: seq 719 running
    [ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
    [ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
    [ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
    [ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039004] systemd-udevd[75]: seq 719 processed with 0
    [ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
    [ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
    [ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039070] systemd-udevd[75]: seq 720 running
    [ 3.039078] systemd-udevd[76]: seq 721 running
    [ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
    [ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039094] systemd-udevd[75]: seq 720 processed with 0
    [ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
    [ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.039133] systemd-udevd[76]: seq 721 processed with 0
    [ 3.039146] systemd-udevd[67]: seq 715 running
    [ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
    [ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.039181] systemd-udevd[67]: seq 715 processed with 0
    [ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039224] systemd-udevd[77]: seq 722 running
    [ 3.039235] systemd-udevd[78]: seq 723 running
    [ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
    [ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
    [ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
    [ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.039267] systemd-udevd[77]: seq 722 processed with 0
    [ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.039277] systemd-udevd[78]: seq 723 processed with 0
    [ 3.039284] systemd-udevd[75]: seq 717 running
    [ 3.039288] systemd-udevd[76]: seq 718 running
    [ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
    [ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
    [ 3.039309] sys

    Guys, I think I've found the strange thing.
    First, in the recovery shell, when I type "lvm lvscan", it prints:
    WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
    and then it says that all four my logical volumes root,boot,home and var are inactive.
    So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
    I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
    The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
    Last edited by rdm (2015-01-29 21:55:44)

  • HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

    I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
    Help me Obie One Canobie you are my last hope

    I have confused myself with the facts!  Started out keeping track of every step and every variable but have sort of lost it as we progress here.  First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question.  Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option.  Then powered down the computerator.
    Next started up computerator.  Turned Time Machine ON  and experienced multiple successful backups!  Then I started up a few applications, Mail and Text Edit (but not Safari so far).  Had a few more successes.  After each backup, I used Disk Utility to verify the backup disk is still OK.  This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
    Put computer to sleep for the night.  Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD!   Did a restart and verified the backup disk... OK.
    Did a few    Sleep-bad, Restart -OK    repetitions.
    It seems consistent:  Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
    =============================
    Now then, I don't understand everything I know here.  Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier).  Is there any truth in this?
    I may abandon this Seagate thing for something more compatible.  What's out there that we know works reliably for us?

  • I have a Macbook pro 4,1 My Battery would not charge after only 23 cycles. I tried the battery update now my macbook will not boot. it has a kernel panic Unable to find driver for this platform:

    Macbook 4,1
    Early 2008 15" macbook pro
    Running Snow Leopard
    the Battery was not working after only 23 cycles
    I tried the Battery update and now it will not boot at all
    I really do not want to loose my data on the drive
    panic message is
    Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
    Please help

    Panic Message
    panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
    "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
    Debugger called: <panic>
    Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
    (7 lines of hex)
    BSD Process name corresponding to current thread: Unkonwn
    Kernel version:
    Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
    I tried to boot from CD can, but i dont want to loose any information.
    Tried disk tools
    Hardware test
    Tried to check if it was memory sticks failing or battery , nothing else plugged in
    if i boot holding Apple key and S
    I get additional warnings about AppleACPIPlatform and not being able to load Kext

  • Kernel Panic: Unable to find driver for this platform

    So, my 1 GM RM, 1.5 GHz Powerbook G4 (15 inches) has been behaving wonderfully lately. Until, this morning, it locked up -- as it sometimes does -- after inserting a 3rd party SATA card and waking it from sleep.
    This is normally not a problem. A reboot gets things back on track. Not today. The reboot stayed on the grey screen with the white apple logo. I tried booting off of a Disk Warrior CD and an OS X 10.4 install DVD. I go this kernel panic:
    Unable to find driver for this platform: "PowerBook5,6".
    But...and here's the best part...if I boot into target disk mode and hook the computer up to another similar Powerbook we have, the similar PowerBook boots fine using my drive.
    So, it seems to be a hardware problem with my PowerBook. Any ideas on how I narrow it down?
    Thanks,
    Gary

    Glad you found your problem. Our kernel panic on our 15" G4 is a bad logic board. $500+ to fix it. Just found out yesterday.
    JWTech

  • Unable to find the report in the manifest resources

    <p>Hi!</p><p>I have problem using Crystal Report documents created in Visual Studio 2005 using the build-in version of Crystal Reports. If I create a project from scratch with one report and then some code to initialize and export the report to disk I get the following error message:</p><p>"Unhandled Exception: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Unable to find the report in the manifest resources. Please build the project, and try again."</p><p>I have tried using both the "Embedded resource" and the "Content" options during build, but with no luck at all. When using the Content option I explicitly load the rpt-file but no luck at all. Do anyone have a clue to what the problem is? I have absolutely no idea. The things worked in Visual Studio 2003 but not in 2005. What is the manifest resource?</p><p>Would really appreciate some help, thanks in advance!</p><p>My source code is below.</p><p>Best regards<br />Lars</p>class Program {<br /><font size="1"><font color="#0000ff">   public</font> <font color="#0000ff">static</font> <font color="#008080">TableLogOnInfo</font> CreateConnectionInfo(<font color="#0000ff">string</font> userID, <font color="#0000ff">string</font> password, <font color="#0000ff">string</font> serverName, <font color="#0000ff">string</font> databaseName) {<br />         <font color="#008080">TableLogOnInfo</font> conInfo = <font color="#0000ff">new</font> <font color="#008080">TableLogOnInfo</font>();<br />         conInfo.ConnectionInfo.UserID = userID;<br />         conInfo.ConnectionInfo.Password = password;<br />         conInfo.ConnectionInfo.ServerName = serverName;<br />         conInfo.ConnectionInfo.DatabaseName = databaseName;<br /><font color="#0000ff">         return</font> conInfo;<br />   }<br /><br /></font><font color="#0000ff"><font size="1"><font color="#0000ff">   public</font> <font color="#0000ff">static</font> <font color="#008080">ReportClass</font> CreatePersonalWillReport(<font color="#008080">TableLogOnInfo</font> conInfo, </font><font size="1"><font color="#0000ff">string</font> personID) {<br />           </font><font size="1"><font color="#008080">ReportClass</font> doc = <font color="#0000ff">new</font> <font color="#008080">ReportClass</font>();<br />           </font><font size="1">doc.Load(<font color="#800000">@"C:\Utveckling\reports\main\ClassLibrary1\bin\Debug\CrystalReport1.rpt"</font>);<br />           </font><font size="1"><font color="#008080">List</font><<font color="#008080">ReportParameter</font>> parameters = <font color="#0000ff">new</font> <font color="#008080">List</font><<font color="#008080">ReportParameter</font>>();<br />           </font><font size="1">parameters.Add(<font color="#0000ff">new</font> <font color="#008080">ReportParameter</font>(<font color="#800000">"@personID"</font>, personID));<br />           </font><font size="1"><font color="#0000ff">return</font> ApplyReportParameters(doc, parameters, conInfo);<br />   }</font></font><font color="#0000ff"> <p>&#160;</p><p><font size="1"><font color="#0000ff">   public</font> <font color="#0000ff">static</font> <font color="#0000ff">void</font> ExportReportToDisk(<font color="#0000ff">string</font> fileName, </font><font size="1"><font color="#008080">ReportClass</font> report, </font><font size="1"><font color="#008080">ExportFormatType</font> formatType) {<br />           </font><font size="1">report.ExportToDisk(formatType, fileName);<br />   </font><font size="1">}</font></p><p><font size="1"><font color="#0000ff">   protected</font> <font color="#0000ff">static</font> <font color="#008080">ReportClass</font> ApplyReportParameters(<font color="#008080">ReportClass</font> report, <font color="#008080">List</font><<font color="#008080">ReportParameter</font>> paramList, </font><font size="1"><font color="#008080">TableLogOnInfo</font> conInfo) {<br />           </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">Table</font> t <font color="#0000ff">in</font> report.Database.Tables) {<br />               </font><font size="1">t.ApplyLogOnInfo(conInfo);<br />           </font><font size="1">}</font></p><p><font size="1">           <font color="#0000ff">foreach</font> (<font color="#008080">Section</font> s <font color="#0000ff">in</font> report.ReportDefinition.Sections) {<br />                  </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">ReportObject</font> ro <font color="#0000ff">in</font> s.ReportObjects) {<br />                        </font><font size="1"><font color="#0000ff">if</font> (ro.Kind == CrystalDecisions.Shared.<font color="#008080">ReportObjectKind</font>.SubreportObject) { <br /></font><font size="1"><font color="#008080">                             SubreportObject</font> sro = (<font color="#008080">SubreportObject</font>)ro;<br />                             </font><font size="1"><font color="#008080">ReportDocument</font> doc = sro.OpenSubreport(sro.SubreportName);</font></p><p><font size="1"><font color="#0000ff">                             foreach</font> (<font color="#008080">Table</font> t <font color="#0000ff">in</font> doc.Database.Tables) {<br />                                  </font><font size="1">t.ApplyLogOnInfo(conInfo);</font></p><p><font size="1">                             }<br />                        </font><font size="1">}<br />                  </font><font size="1">}<br />           </font><font size="1">}<br /><br />           </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">ParameterFieldDefinition</font> paramField <font color="#0000ff">in</font> report.DataDefinition.ParameterFields)  {<br />                </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">ReportParameter</font> rp <font color="#0000ff">in</font> paramList) {<br />                     </font><font size="1"><font color="#0000ff">if</font> (paramField.Name == rp.Name) {<br />                         </font><font size="1"><font color="#008080">ParameterValues</font> pv = paramField.CurrentValues;<br />                         </font><font size="1"><font color="#0000ff">string</font> s = (<font color="#0000ff">string</font>)rp.Value.Value;<br />                         </font><font size="1"><font color="#008080">ParameterDiscreteValue</font> pdv = <font color="#0000ff">new</font> <font color="#008080">ParameterDiscreteValue</font>();<br />                         </font><font size="1">pdv.Value = s;<br />                         </font><font size="1">pv.Add(pdv);<br />                         </font><font size="1">paramField.ApplyCurrentValues(pv);<br />                     </font><font size="1">}<br />                </font><font size="1">}<br />            </font><font size="1">}</font></p><p><font size="1"><font color="#0000ff">           return</font> report;</font></p><p><font size="1">       }</font></p><p>&#160;</p><p><font size="1"><font color="#0000ff">          static</font> <font color="#0000ff">void</font> Main(<font color="#0000ff">string</font>[] args) {<br />               </font><font size="1"><font color="#008080">TableLogOnInfo</font> conInfo = CreateConnectionInfo(<font color="#800000">"username"</font>, <font color="#800000">"password"</font>,<br />                                                                                </font><font size="1"><font color="#800000">"server"</font>, <font color="#800000">"database"</font>);<br />               </font><font size="1"><font color="#008080">ReportClass</font> report = CreatePersonalWillReport(conInfo, <font color="#800000">"-1291000956"</font>);<br />               </font><font size="1">ExportReportToDisk(<font color="#800000">"C:\temp\report.pdf"</font>, report, <font color="#008080">ExportFormatType</font>.PortableDocFormat);<br />           </font><font size="1">}</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> Helper class that contains parameter key/value pairs.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">protected</font> <font color="#0000ff">class</font> <font color="#008080">ReportParameter</font> {</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter name.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">private</font> <font color="#0000ff">string</font> name = <font color="#0000ff">null</font>;</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter value.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">private</font> <font color="#008080">ParameterDiscreteValue</font> value = <font color="#0000ff">new</font> <font color="#008080">ParameterDiscreteValue</font>();</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter name.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">public</font> <font color="#0000ff">string</font> Name {</font></p><p><font size="1"><font
    color="#0000ff">get</font> {</font></p><p><font size="1"><font color="#0000ff">return</font> <font color="#0000ff">this</font>.name;</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#0000ff">set</font> {</font></p><p><font size="1"><font color="#0000ff">this</font>.name = <font color="#0000ff">value</font>;</font></p><p><font size="1">}</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter value.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">public</font> <font color="#008080">ParameterDiscreteValue</font> Value {</font></p><p><font size="1"><font color="#0000ff">get</font> {</font></p><p><font size="1"><font color="#0000ff">return</font> <font color="#0000ff">this</font>.value;</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#0000ff">set</font> {</font></p><p><font size="1"><font color="#0000ff">this</font>.value = <font color="#0000ff">value</font>;</font></p><p><font size="1">}</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The constructor.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><param name="name"></font><font color="#008000">the parameter name</font><font color="#808080"></param></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><param name="value"></font><font color="#008000">the parameter value</font><font color="#808080"></param></font></font></p><p><font size="1"><font color="#0000ff">public</font> ReportParameter(<font color="#0000ff">string</font> name, <font color="#0000ff">object</font> value) {</font></p><p><font size="1"><font color="#0000ff">this</font>.name = name;</font></p><p><font size="1"><font color="#0000ff">this</font>.value.Value = value;</font></p><p><font size="1">}</font></p><p><font size="1">}</font></p></font>

    Lars,
    Â Have you read the CRnet_deployment.doc if not it may help fix your problem (It didnt mine but hey you may be lucky) See http://support.businessobjects.com/communitycs/technicalpapers/crnet_deployment.pdf
    I have a similar issue but in 2003.net using the bundled CR package. I'm trying to use CR in a Web Service called from a Compact Framework device. I've confirmed I'm using the correct Merge Modules & my Build Actions are all set as stated in the CR Application Deployment document but it still spits out Unable to find the report in the manifest resources
    I've looked extensively on the net and while others have had this problem the only advice I've seen revolves around embedded build actions and using the correct merge modules. There must be something else causing this problem and some one who has found a way round it?!?
    If your that someone please take 5 minutes out and help a couple of guys in distress?
    Thanks in advance,
    Ian

  • Nmew32rg.dll - Unable to find EM location in the registry : RegQueryValue f

    Hi All,
    I am getting below error while installing companions "10203_vista_w2k8_x86_production_companion.zip" (32-bit) (HTTP server) on Windows 2008 sp2 64-bit machine.
    .....CALL INTO REGISTRY.....
    DLL TO LOAD = \nmew32rg.dll
    DLL LOADED
    Unable to find EM location in the registry : RegQueryValue failed
    REGISTRY VALUE = nullThis happens only if I do installation from command line by using response file. From OUI interactive installer it is being installed properly.
    ORACLE_HOME (db) = C:\oracle\Database\oracleDB\
    ORACLE_HOME=C:\oracle\Database\oracleDB\OHS
    Companion disk:           C:\oracle\Oracle10g\companion
    Modified response file:   C:\oracle\Oracle10g\companion\oracle.companionCD.midtier.rsp
    Command to install:
    "C:\oracle\Oracle10g\companion\install\oui.exe" -silent -nowait -force -waitforcompletion FROM_LOCATION="C:\oracle\Oracle10g\companion\stage\products.xml" ORACLE_HOME=C:\oracle\Database\oracleDB\OHS ORACLE_HOME_NAME=oracle_10gOHSHome -responseFile C:\oracle\Oracle10g\companion\oracle.companionCD.midtier.rspThe machine already has "10204_vista_w2k8_x64_production_db.zip" database installed.
    Can you please suggest what additional things I need to take care to install companions using response file?

    Thanks Werner for reply !! I was really looking for any reply of my thread.
    I think it is useless to mention because something I did which is not supported,
    1. I installed "10204_vista_w2k8_x64_production_db.zip" database on w2k8 sp2 (64-bit) machine which is supported DB version for w2k8 environment.
    2. Companions are available for w2k8 64 bit but HTTP server is not there. It is only available in "10203_vista_w2k8_x86_production_companion.zip". This is a x86 (32-bit) setup and while doing interactive mode installation it is passing all prereq checks on x64 and not showing me any information to not to use this setup for x64. Also, it works fine after installation but not working in command-line installation.
    One last question,
    Will Oracle provide support on fixing this issue if I contact them or raise SR ?

  • HT6114 i have a mac mini that wont boot up and the screen says unable to find driver for this platform: \ powermac10.2 it also says mac os version not yeet set...how can i fix it

    the mac mini wont boot up it says you need to restart yuor computer and that its unable to find river for platform can i download software free from the internet to fix this

    What OS were you using on the mini before this problem started? If 10.7.8.9, boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions. Then reinstall the OS.
    OS X Recovery
    OS X Recovery (2)

  • HT203164 playlist to cd burn failure. message stating unable to find cd burn program appears!? recently had HP pavilion laptop repaired for  fan overheating prob & wonder if repair job erased cd program? HELP please!? am techno-challenged, old & not afflu

    tried to burn playlist to CD but saw message stating unable to find CD burn program!? recently had repair company do replacement of cooling fan & need to know if this is the cause?? am OLD techo-challenged lover of music & am desperate for good free advice! PLEASE HELP! i only know enough about computer systems to be dangerous to myself and them!

    i went to the HP site, read thru & viewed video instructions, went to device manager as well as HP assistant & followed all the instructions (hopefully?) but all i accomplished was killing some time as i waited for the next winter storm! am afraid to do their HP recovery disk that i made on my first HP day because i had to have geek squad make changes last year due to other connectivity issues & am hesitant to undo all their work i had paid for! hoped that HP assistant program would just discover prob on its' own! device manager took me to view of all components but nothing just simply says "this is your optical/cd drive program". am greatful for fact you tried to help, my friend, shows you have admirable and altruistic qualities!.computers have always been too unforgiving when it comes to my trying to enjoy them! too bad i don't know name of device that governs cd-drive. thank you for wanting to help me out.

  • Unable to load Disk 2 of CD install of Solaris 10

    My platform is a Sun Ultra 60 sparc system.
    I find it very disappointing that the SUN downloads do not install. Three or four years ago, I had the same problem with Solaris 9. The first disk installed fine, but not the second disk. I finally gave up and ordered the SUN disks, which installed fine.
    My CD's are all correct. I made three copies of these disks from an iso image--each shows the correct files when read from a MAC and a PC.
    I am unable to install disk two.
    Is there a way to load these disks onto one of my hard drives, so that I can install from one drive to another? Presently I have Solaris 9 installed on disk 1 and the first disk of Solaris 10 installed on disk 2.
    Thanks in advance.

    The graphic drivers do not seem to be the problem. I removed the open source driver and installed catalyst, but the result is still the same; the game starts if sound is blocked by smplayer, but not otherwise. I installed "lib32-alsa-plugins", as recommended in the steam wiki-page. I also installed all dependencies as specified in the Game specific section:
    https://wiki.archlinux.org/index.php/St … n_of_Kings
    The problem remains the same. I've also tried running it from within the game folder, but it results in a steam window saying that I need to assure that steam is running and a user logged in (the same result whether I have steam running or not):
    ~/.local/share/Steam/ubuntu12_32/steam-runtime/run.sh ./witcher2
    [S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
    [S_API FAIL] SteamAPI_Init() failed; unable to locate a running instance of Steam, or a local steamclient.dll.
    I tried using native runtime, too, but in that case steam started, the game, however, did not start at all, no error or anything.
    I'm using alsa as a sound system, could it be that steam and/or witcher 2 depends on pulseaudio?
    EDIT: Forgot to mention that I of course have installed libcurl (i.e. the packages specified in the link above) and lib32-keyutils (The game doesn't seem to recognize this when started from the game directory...)
    Last edited by Kildran (2014-11-20 18:19:18)

Maybe you are looking for

  • Http error 504:gateway timeout

    Hi, I am convert from windows mobile to Blackberry ! I have software running on my server that I can access using my mobile. BUT since I changed to BB I am getting an error trying to log into my server. If I use the browser under wifi with the browse

  • Podcast not in store

    hi, so apple has sent me a conformation letter that my podcast is indeed in the itunes store, they also gave me a link to go to view it. The link works, and my podcast shows up in the music store. But when I try to search my podcast in the music stor

  • Itunes background occasionally pink?!

    Hi, my itunes seems to be working fine, no problems syncing or downloading etc, but the background of the itunes screen in all menus is pink everytime i log on, and this also affects windows in the itunes store that should have a white background. al

  • IPHONE Y OUTLOOK

    MI IPHONE NO SINCRONIZA CONTACTOS CON EL MICROSOFT OUTLOOK. SINCRONIZA CORRECTO DESDE EL MICROSOFT OUTLOOK AL IPHONE ¿QUE PUEDO HACER'

  • Source Media Backup to DVD (Disc Spanning) Options

    I'm really unsure where this one goes: I have about 150GB of source footage (P2HD) that I would like to backup to DVD and I'm looking for applications that will allow me to span a set of disks with this data (about 110 clips). I looked into Toast 9 b