"Unable to find inbound interface"
Hi all,
I have an error in sxmb_moni. Everytime I click on the red flag, I get the error, "Unable to find inbound interface". I already checked namespaces and SCV in IR. I also checked Interface Determination in ID. They are all correct. I have already tested my config in QAS, and everything went well. I'm having problems right now in PRD. Can somebody help me? thanks.
When I run Test Tool Config, I get the following error:
Interface Determination
Thanks.
Regards,
IX
Error when determining the inbound interface: Problem evaluating a condition: Exception
CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include:
CL_SWF_RLS_CONDITION==========CM00Q, line: 160).
Payload problem check these solved threads:
Error
Error in Receiver Determination
regards,
Abhishek
Similar Messages
-
Receiver Business System Connot find Inbound Interface - IDoc to File
Hi Everyone,
I am doing IDoc to File Scenario.....Idoc got triggered from SAP system and successfully posted to SAP PI.
Now when I check in T-Code IDX5 in PI, I got one message. When I double click that I am getting following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Also When I am selecting Receiving Inbound interface for Receiver system, I am not getting any interface by default.
Please help me out.
Thanks & Regards,
SudheerHi everyone,
Thanks for your quick responses.
Actually I am doing IDoc to File Scenario from blog which consists of Conditional Receiver Determination
"SNDPFC"
Here is the Explanation given in that blog:
In most instances, a new Receiver Determination would be created. However, given that in this scenario the combination of the sender service (i.e. u201CGL1u201D) and interface (i.e. u201CMATMAS.MATMAS04u201D) will be used by every student, each student will instead be adding their receiver service to an existing Receiver Determination
11. In the Condition column on that same line, left click on the question mark help icon
12. In the following Condition Editor pop-up window, left click on the help icon in the u201CLeft Operandu201D field
13. In the following Expression Editor pop-up window, select the u201CContext Objectu201D radio button
14. Use the drop drown to locate and select the u201CSNDPFCu201D field and u201COKu201D
15. Back in the Expression Editor, leave the u201C=u201D Operand as is
16. Enter your group number in the u201CRight Operandu201D and u201COKu201D
17. u201CSaveu201D and validate your u201CConfigured Receiversu201D as seen below:
I did not understood this Conditional RD.
Apart from this all configuration are correct.
Thanks,
Sudheer -
Unable to find HDL Interface Node
I have MyRio and LabView 2014 with all the modules installed and updated.
Xilinx 2014 is also installed and I can compile for FPGA.
However in block diagram I can't find HDL interface Node for importing VHDL code. As you see in the second screenshot.
How may I solve this issue?
Solved!
Go to Solution.You mean that IP Integration node?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Unable to find mapping Interface columns for Service Items in Sales Order
Hi All,
I have a requirement to create a service item for a Sales Order through Interface tables. Once the oe_headers_iface_all and oe_lines_iface_all tables are populated, order import program is run to populate the data into the base tables.
I am unable to figure out the interface mapping columns for the base table columns namely,
(oe_order_lines_all table)
service_ref_order_type
service_ref_order_numbe
service_ref_line_number
service_ref_shipment_number
Also, the above mentioned base table columns are mandatory and not able to create a Service item through Order import.
When checked in the front end, per record history these columns are taken from oe_order_lines_v, however when checked in the query of this view am unable to trace the above four columns.
Any help will be greatly appreciated.
Thanks,
JayThis does not appear to be connected with the subject of this forum, which is [Oracle Application Express|http://apex.oracle.com/i/index.html].
Taking a wild guess, this might have something to do with [eBusiness Suite|http://forums.oracle.com/forums/category.jspa?categoryID=3]? -
Unable to find JVMDI interface - GetEnv retruining JNI_EVERSION
I'm building a debug agent using jrockit 1.4.2_11 (windows XP). However, my debug agent doesn't seem to be able to find jvmdi version 1_3 (or any previous version, such as 1_2, 1_1 or even 1) in that VM.
For example, the initialization call
(*jvm)->GetEnv(jvm, &jvmdi, JVMDI_VERSION_1) is returning the error JNI_EVERSION.
Any suggestions?Later versions of JRockit does not support JVMDI. Please use JVMTI instead (yes, JVMTI is supported on our later 1.4.2 versions).
regards,
/Staffan -
Unable found inbound interface
hi,
i am facing below problem please help me.
Unable to find an inbound interface
IF_DETERMINATION">NO_IIF_CASE_ASYNC
Thanks & Regards,
veeraVeeru,
Please check this threads where they alreay solved this issue:
Re: "Unable to find inbound interface"
Error in interface determination wiht condition
Regards,
---Satish -
Hi, I have configured everything as it should be in XI and I get the message into sxmb_moni but it is redflaged and the error message is "Unable to find inbound interface". I have the Inbound message in Interface Mapping so I don't know what the problem is...do you?
ThanksHi,
But I have like 20 different solutions...how can I in the testconfiguration specify which solution I want to test? is that possible? - See for one sender system and one sender interface you can have only one reciver determination, in that you can add as many recivers as you want........but still the configuration test tool can be invoked by just specifying your sender system and sender interface and if you keep receiver system blank, then it will be executed for all reciver systems.............then you can see for which scenario it is erroring.
Regards,
Rajeev Gupta -
Unable to find an inbound interface
Hi masters,
I have an error in sxmb_moni. I get 'Unable to find an inbound interface' everytime i click on the red flag. How can I remedy this problem. thanks!!!>
Ignatius - Xavier Bazar wrote:
> Hi masters,
> I have an error in sxmb_moni. I get 'Unable to find an inbound interface' everytime i click on the red flag. How can I remedy this problem. thanks!!!
Hi,
1. Check the Inbound message payload in sxmb_moni.
2. If your payload is invalid, it wont be displayed in moni. So check the msg content in RWB- Message Monitoring.
3. Let me know if you are using condition in the Reciever Determination.
Regards,
Chandra -
JCABinding :Unable to find suitable inbound binding
Hi,
I imported a 10g BPEL process to 11g and it compiled successfully. But while deploying to SOA 11g it fails with following message.
[02:36:04 AM] Error deploying archive sca_SOAIndFileHandler_rev1.0.jar to soa_server1 [soclxs3mp13.com:8001]
[02:36:04 AM] HTTP error code returned [500]
[02:36:04 AM] Error message from server:
Error during deployment: Deployment Failed: [JCABinding] [SOAIndFileHandler.readFiledataFTP/1.0]Unable to complete load due to: Generic error.
Generic error.
Cause: Unable to find suitable inbound binding.
Please create a Service Request with Oracle Support.
: Generic error.
Generic error.
Cause: Unable to find suitable inbound binding.
Please create a Service Request with Oracle Support.
[02:36:04 AM] Check server log for more details.
[02:36:04 AM] Error deploying archive sca_SOAIndFileHandler_rev1.0.jar to soa_server1 [soclxs3mp13.com:8001]
[02:36:04 AM] #### Deployment incomplete. ####
[02:36:04 AM] Error deploying archive file:/C:/Users/tmonty/SOAIndFileHandlerProcess/SOAIndFileHandler/deploy/sca_SOAIndFileHandler_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Can SOA gurus help me on this.
Thanks.
Tapan
Edited by: user8891089 on Apr 12, 2010 2:34 PMhere the solution,
Just take out the
callbackInterface="http://xmlns.oracle.com/pcbpel/adapter/file/WritePositivePayFile/#wsdl.interface(Write_ptt)"
or
callbackInterface="http://xmlns.oracle.com/pcbpel/adapter/file/WritePositivePayFile/#wsdl.interface(Read_ptt)"
Thanks
Kris
Edited by: user13015650 on Apr 20, 2010 2:07 PM -
Unable to find channel ID at inbound SOAP Adapter
Hi experts,
I encountered a very puzzling problem:
I have a scenario:
IDOC -> XI -> SOAP
For 2 interfaces of such nature, 1 works fine, 1 doesn't.
The one that does not work is throwing the following error in RWB - Message Display Tool (MDT):
2007-03-22 10:57:05 Success The message was successfully received by the messaging system. Profile: XI URL: http://ootspdbs02:50100/MessagingSystem/receive/AFW/XI
2007-03-22 10:57:05 Success Using connection AFW. Trying to put the message into the receive queue.
2007-03-22 10:57:06 Success Message successfully put into the queue.
2007-03-22 10:57:06 Success The message was successfully retrieved from the receive queue.
2007-03-22 10:57:06 Success The message status set to DLNG.
<b>2007-03-22 10:57:06 Error Unable to find channel ID
2007-03-22 10:57:06 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: a277e57c-c837-e44f-9ae2-da0d701980c4. </b>
2007-03-22 10:57:06 Success The asynchronous message was successfully scheduled to be delivered at Thu Mar 22 10:58:06 SGT 2007.
2007-03-22 10:57:06 Success The message status set to WAIT.
In SXMB_MONI, it shows the message has been processed successfully - indicating that the mapping is fine. Status = Awaiting acknowledgement.
I've looked up the forums, and the general solution offered is to refresh the SLD cache.
I've tried that, but it doesn't work.
Please help.
Thanks.
Ron> hmm.. then things not a problem with the cache.
> Is the error in MONI? Or is it in the Adapter Engine?
>
>
> I know it isrepeatitive, but checking if the Objects
> are all active and correct in the ID is the only
> solution I can suggest.
>
> Regards
> Bhavesh
In the MONI, the status is successful, awaiting acknowledgement.
After sometime, the ack status will be "Acknowledgement contains System Errors"
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
<SAP:P1>,BS_DEV1_NAUTICUS_OOTS</SAP:P1>
<SAP:P2>,BS_NHGDDBS01,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
But I don't think these are related, because the message wasn't sent out, naturally there's an error in the ack. -
Unable to find the Message Interface Receiver Determination
Hi Everyone,
I am unable to find the Message Interface Receiver Determination in the SAP BASIS 7.0 --> http://sap.com/xi/XI/System. in IR.
I am using P.I 7.0 SP 15
Could anyone let me know what could be the problem.
Regards,
VarunHi Sridhar,
I cant find the Message Interface Receiver Determination in IR under the standard SWCV SAP BASIS 7.0 and under the namespace http://sap.com/xi/XI/System. in IR.This Message Interface will be useful while configuring in enhanced Receiver Determination.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/84/e8763c997fda50e10000000a11405a/frameset.htm
Regards,
Varun -
Unable to find SWCV in BW system for inbound proxy
Hello Friends,
There is one interface running in our system. It is FILE to PROXY. Every day MDM sends some vendor details in files form. PI polls the file and map to structure for BW. (BW is SAP System).
In Operation Mapping, Sender Side : Our own interface and structure is used. On the Receiver side, 'GenericVendorIN' interface from SAP SWCV 'BI CONT' is used.
Messages are processed successfully for this interface in PI (PI 7.1) and failed in BW side due to application error. Not all messages, few messages.
When we try to troubleshoot the business logic (ABAP) written for this inbound interface in BW system, this SWCV BI CONT is not displayed in SPROXY transaction. But, we see successful messages and failure messages in BW system. (Txn: SXMB_MONI). ESR is connecting fine. Our SWCV is adisplayed correctly.
Friends, could you please clarify why SAP Standard SWCV BI CONT is not displayed in SPROXY transaction? For any errors, how do we troubleshoot then on the inbound side i.e in BW system.
Thanking you.
Kind regards,
Jegathees P.hi,
In BW, check in tx SXMB_ADM, option Integration Engine configuration, if you have in category RUNTIME, parameter IS_URL something like that "dest://<NameOfYourRfcDestination>".
and in SM59 (of BW), check that you have the same RFC destination (type H).
or maybe you use a Java proxy, instead of an abap proxy.
regards.
Mickael -
Hello,
Can anyone tell me what inbound interface the SAR (schedule agreement release) uses? I am unable to find the inbound interface in SPROXY.
Also, any good links for implementing Schedule Agreements in SUS.
Thanks,
Mattthere is no seperate inbound interface for SAR , the purchase order inbound interface is used for creating scheduled agreement release in SUS.
only thing that differentiates between PO and SAR in SUS is the header description, descriptuon will have DELINS For SAR.
and both the documents use the function module BBP_API_SUSPO_CRT
set subtype (SR) for SA releases for SUS-MM scenario
IF ls_header_v_u-description EQ 'DELINS'.
also note that the object type for both the PO and SAR in SUS is the same and is 'BUS2230'. -
Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING
I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64 -
Unable to find security data for sender
Hello, does anybody know what this message means. The problem appear when I send an Idoc to XI. Other interfaces (Master data) are working properly. My question is, do I need to make some extra settings for the transactional data interfaces (SHPMNT)?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Technical Routing
-->
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages" p2="VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries" p3="" p4="">PHYROU.UNDEFINED_SECURITY</SAP:Code>
<SAP:Text language="EN">Technical routing: Unable to find security data for sender sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages for receiver VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries</SAP:Text>
</SAP:ErrorHeader>
regards
Ernesto DuranHI,
i am also getting the same error in my scenario. Could u plz inform me what is the solution?
Rgds,
Ram Sri
Maybe you are looking for
-
What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod? I did this some time ago. On screen was shown available space somewhat less than 120 GB, but maybe somewhere between 10 and 20 GB mo
-
Writing an file to a specified directory
I have an application in Tomcat. In this application i write data into an xml-file. When i check this, i see that the file is written in the bin directory of tomcat. Now I want to write this file into another directory, for example: /tomcat/webbaps/c
-
Can anybody share pure BI Performance document of DB02, St02,RSRST analysis does purpose. Can anyone share it., Thanks in advance.
-
How to convert a csv file into excel report?
Hello, I have a csv file, can any body help me how to convert it into an excel report. thanks in advance vakvarma
-
I am on a family plan and was wondering is it possible to get a detailed break down of my calls and sms that would include phone numbers for my line only?