Unable to fulfil request for 3665920 bytes of memory space.

Hi Experts,
I am facing the error " Unable to fulfil request for 3665920 bytes of memory space." when I try to call adobe form document from portal.The profile parameter ztta/max_memreq_MB has value of Min - 5 and Max - 2048.
Please let me know your valuable suggestions to resolve the issue.
Thanks in advance.
Regards,
Arun.

Hello,
I am facing the same issue as well.  However, this profile param has a max value of 2048 right?  The current value in our system is 2047.  It means that this can not be extended anymore.  If that is the case, is there any other way?
Thank you.
Mark

Similar Messages

  • Error: Unable to fulfil request for 262144 bytes of memory space.

    Hi experts,
    When running a query and 30 minutes after that, I received an error message from BW:
    <b>Error Group
    RFC_ERROR_SYSTEM_FAILURE
    Message
    Unable to fulfil request for 262144 bytes of memory space.</b>
    Can someone help me with this?

    Hi Bob,
    Many thanks for your reply. I believe your observation is correct. I can run the report when I choose only one month instead of 17 months.
    However, do you think that something can be done on BW server to eliminate this problem? Is there not enough memory on BW server to fulfil this request?
    Thanks.

  • Query - unable to fulfill request for 65536 bytes of memory space

    Hi all,
             When i executing query it is running for 20 mins and showing this below error. Please guide me on this.
    Error:
    - Unable to fulfill request for 65536 bytes of memory space
    - No more storage space available for extending an internal table
    Note:
            Report design based on cube and it have around 60 laks records, aggrated and compression already available for this cube.
    Thanks & Regards,
    R. Saravanan

    Hi raj,
    Are you trying to execute the report in BEx analyzer?
    if data is huge try to reduce the volume of data with the help of filters for ex run the report for particular material, date ,cost center etc.
    If you are using BEx analyzer and with MS office -2003 version then Ms excell has a limitation of 65536 rows, this might be causing the error.
    Looks like your report is having more than 65536 records (selections for which your report was run).
    if you want all the records to be displayed try to use WAD. or use the MS excel 2007 or greater versions(not sure if it can hold all your 60 lack records).
    Regards
    KP
    Edited by: prashanthk on Feb 1, 2011 3:09 PM

  • Unable to fulfil request for 3971508 bytes of memory space in SMQ2 -SYSFAIL

    Hi Experts,
    In Production Server PI SMQ2 transaction, I am getting SYSFAIL Status for a specific Queue Name <XBTO6___0000>. When I am double clicking it is showing "Unable to fulfil request for 3971508 bytes of memory space". I have tried to "Execute LUW" but the status is not changing at all. I have gone to the Message in SXMB_MONI, it is showing "Recorded for Outbound Processing".
    Please advice as it is continously taking more and more Queue Entries.
    Thanks,
    Nabendu.

    Hi Nabendu,
    May be this thread will help you...have a look..
    Re: Unable to fulfil request for 528700 bytes of stora ge space.
    Regds,
    Pinangshuk.

  • Unable to fulfil request for 528700 bytes of stora ge space.

    Hi all,
    I have a problem with messages getting stuck in XI, and
    if I check QRFC monitor I get a SYSFAIL with message
    "Unable to fulfil request for 528700 bytes of storage space."
    So nothing passes thru.
    Any idea where to start solving the error?
    Regards,
    Fredrik

    Hello,
    does anybody have a solution to this problem?
    We've also already enlarged the ztta / max _ memreq _ MB parameter to 2048. In ST22 i can see the SYSTEM_NO_ROLL dump. The message there is "Unable to fulfil request for 310373472 bytes of memory space". When the message is processed i can see in ST02 that the Max.use of Extended memory is growing to 1.290.240 (about 1.3GB).
    If somebody has a solution out there please let me know.
    Thanks
    regards
    Florian

  • Unable to fullfill request for 11935600 bytes of memory

    Dear All,
    Our Scenarion IDOC to JDBC
    R/3->XI->JDBC
    We Schedule Bckground Job in R/3 That Job will Send 300000 (Three Lacks) IDOCS to the XI System XI will Process it and Send it to JDBC
    299993 got posted in SQL Server Through JDBC Comm Channel
    But  7 IDOCs got missed in Between R/3 and XI
    When checked in SM58
    It is giving following Error :
    <b> unable to fullfill request for 11935600 bytes of memory</b>
    Please Help Us
    Regards
    Anjan

    Hi,
    >>>>We Schedule Bckground Job in R/3 That Job will Send 300000 (Three Lacks) IDOCS to the XI System
    so how come this is possible?
    Regards,
    michal

  • Problem while using an adobe form "Unable to fulfil request for memory"

    Hi Experts,
    When I try to call a Adobe Form from the porta,l the system encounters a problem and the error message is "Unable to fulfil request for 3665920 bytes of memory space.".Could yopu please provide you valuable suggestion to resolve the issue.
    Thanks.
    Arun.

    Hey fellow ADS developer,
    I had this issue once and had hard time to figure out from where it was coming!
    In fact, check the free space on your SAP Server hard disk (or ask admin guys). It might be that there is no more hard disk! Because every time you generate a form, it is stored on your server harddisk. You need to flush all that temp stuff regularly.
    Hope this  helps
    Yann

  • I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

    I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

    Hello,
    You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
    If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
    In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
    Enter a name for the connection and click OK.
    In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
    In the final pop
    -up dialog, set the communication settings for communicating with your device.
    Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
    If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
    Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
    Grant M.
    National Instruments

  • Unable to securely request for a page

    Question:
    a) I'm unable to securely request for my webpage : https://127.0.0.1:8443/Blah , instead I get the following Error:
    Firefox can't establish a connection to the server at localhost:8443.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    On Internet Explorer I simply get:
    Internet Explorer cannot display the webpage
    b) How do I know which SSL Implementation my tomcat is making use of: JSSE/APR
    Details:
    web.xml
    <?xml version="1.0"?>
    <!DOCTYPE web-app PUBLIC
    "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
    id="Your_WebApp_ID"
    version="2.5">
    <description>The standard web descriptor for the email client</description>
    <servlet>
    <servlet-name>AuthenticateUser</servlet-name>
    <servlet-class>MailBoxController</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>AuthenticateUser</servlet-name>
    <url-pattern>/ControlPanel</url-pattern>
    </servlet-mapping>
    <welcome-file-list>
    <welcome-file>login.jsp</welcome-file>
    </welcome-file-list>
    <error-page>
    <error-code>401</error-code>
    <location>/authenticationFailed.jsp</location>
    </error-page>
    <context-param>
    <param-name>serverName</param-name>
    <param-value>Gmail</param-value>
    </context-param>
    <context-param>
    <param-name>port</param-name>
    <param-value>993</param-value>
    </context-param>
    <context-param>
    <param-name>ip</param-name>
    <param-value>imap.gmail.com</param-value>
    </context-param>
    <session-config>
    <session-timeout>30</session-timeout>
    </session-config>
    <listener>
    <listener-class>Logger</listener-class>
    </listener>
    <security-constraint>
    <web-resource-collection>
    <url-pattern>/*</url-pattern>
    <http-method>POST</http-method>
    </web-resource-collection>
    <auth-constraint>
    <role-name>administrator</role-name>
    </auth-constraint>
    <user-data-constraint>
    <transport-guarantee>CONFIDENTIAL</transport-guarantee>
    </user-data-constraint>
    </security-constraint>
    <login-config>
    <auth-method>BASIC</auth-method>
    </login-config>
    <security-role>
    <role-name>administrator</role-name>
    </security-role>
    </web-app>
    tomcat-users.xml :
    <tomcat-users>
    <role rolename="administrator"/>
    <user username="admin" password="system123#" roles="administrator"/>
    </tomcat-users>
    Following tag was added in web.xml in conf of tomcat :
    <-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <Connector
    protocol="org.apache.coyote.http11.Http11NioProtocol"
    port="8443" maxThreads="200"
    scheme="https" secure="true" SSLEnabled="true"
    keystoreFile="C:/Users/.keystore" keystorePass="changeit"
    clientAuth="false" sslProtocol="TLS"/>
    Can anybody please help me with my problem. Am I going wrong with configuring SSL?
    Thanks
    Krutika

    I did add these lines:
    <Connector
         protocol="org.apache.coyote.http11.Http11NioProtocol"
         port="8443" maxThreads="200"
         scheme="https" secure="true" SSLEnabled="true"
         keystoreFile="C:/Users/Krutika Ravi/.keystore" keystorePass="changeit"
         clientAuth="false" sslProtocol="TLS"/>
    to the web.xml contained in conf folder of tomcat.
    But didn't fiddle with server.xml -
    After un-commenting
    <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
    maxThreads="150" scheme="https" secure="true"
    clientAuth="false" sslProtocol="TLS" />
    in server.xml contained in conf folder I get the following exceptions
    Jul 25, 2012 11:11:41 PM org.apache.catalina.core.AprLifecycleListener init
    INFO: Loaded APR based Apache Tomcat Native library 1.1.24 using APR version 1.4
    .6.
    Jul 25, 2012 11:11:41 PM org.apache.catalina.core.AprLifecycleListener init
    INFO: APR capabilities: IPv6 [true], sendfile [true], accept filters [false], ra
    ndom [true].
    Jul 25, 2012 11:11:43 PM org.apache.catalina.core.AprLifecycleListener initializ
    eSSL
    INFO: OpenSSL successfully initialized (OpenSSL 1.0.1c 10 May 2012)
    Jul 25, 2012 11:11:43 PM org.apache.coyote.AbstractProtocol init
    INFO: Initializing ProtocolHandler ["http-apr-8080"]
    Jul 25, 2012 11:11:43 PM org.apache.coyote.AbstractProtocol init
    INFO: Initializing ProtocolHandler ["http-apr-8443"]
    Jul 25, 2012 11:11:43 PM org.apache.coyote.AbstractProtocol init
    SEVERE: Failed to initialize end point associated with ProtocolHandler ["http-ap
    r-8443"]
    java.lang.Exception: Connector attribute SSLCertificateFile must be defined when
    using SSL with APR
    at org.apache.tomcat.util.net.AprEndpoint.bind(AprEndpoint.java:484)
    at org.apache.tomcat.util.net.AbstractEndpoint.init(AbstractEndpoint.jav
    a:610)
    at org.apache.coyote.AbstractProtocol.init(AbstractProtocol.java:429)
    at org.apache.catalina.connector.Connector.initInternal(Connector.java:9
    81)
    at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102)
    at org.apache.catalina.core.StandardService.initInternal(StandardService
    .java:559)
    at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102)
    at org.apache.catalina.core.StandardServer.initInternal(StandardServer.j
    ava:814)
    at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102)
    at org.apache.catalina.startup.Catalina.load(Catalina.java:624)
    at org.apache.catalina.startup.Catalina.load(Catalina.java:649)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:281)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:450)
    Jul 25, 2012 11:11:43 PM org.apache.catalina.core.StandardService initInternal
    SEVERE: Failed to initialize connector [Connector[HTTP/1.1-8443]]
    org.apache.catalina.LifecycleException: Failed to initialize component [Connecto
    r[HTTP/1.1-8443]]
    at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:106)
    at org.apache.catalina.core.StandardService.initInternal(StandardService
    .java:559)
    at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102)
    at org.apache.catalina.core.StandardServer.initInternal(StandardServer.j
    ava:814)
    at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102)
    at org.apache.catalina.startup.Catalina.load(Catalina.java:624)
    at org.apache.catalina.startup.Catalina.load(Catalina.java:649)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:281)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:450)
    Caused by: org.apache.catalina.LifecycleException: Protocol handler initializati
    on failed
    at org.apache.catalina.connector.Connector.initInternal(Connector.java:9
    83)
    at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102)
    ... 12 more
    Caused by: java.lang.Exception: Connector attribute SSLCertificateFile must be d
    efined when using SSL with APR
    at org.apache.tomcat.util.net.AprEndpoint.bind(AprEndpoint.java:484)
    at org.apache.tomcat.util.net.AbstractEndpoint.init(AbstractEndpoint.jav
    a:610)
    at org.apache.coyote.AbstractProtocol.init(AbstractProtocol.java:429)
    at org.apache.catalina.connector.Connector.initInternal(Connector.java:9
    81)
    ... 13 more
    Jul 25, 2012 11:11:43 PM org.apache.coyote.AbstractProtocol init
    INFO: Initializing ProtocolHandler ["ajp-apr-8009"]
    Jul 25, 2012 11:11:43 PM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 2945 ms
    Jul 25, 2012 11:11:43 PM org.apache.catalina.core.StandardService startInternal
    INFO: Starting service Catalina
    Jul 25, 2012 11:11:43 PM org.apache.catalina.core.StandardEngine startInternal
    INFO: Starting Servlet Engine: Apache Tomcat/7.0.29
    Jul 25, 2012 11:11:43 PM org.apache.catalina.startup.HostConfig deployWAR
    INFO: Deploying web application archive C:\Junkyard\apache-tomcat-7.0.29\webapps
    \Blah.war
    Jul 25, 2012 11:11:44 PM org.apache.catalina.loader.WebappClassLoader validateJa
    rFile
    INFO: validateJarFile(C:\Junkyard\apache-tomcat-7.0.29\webapps\Blah\WEB-INF\lib\
    javax.servlet-5.1.12.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2.
    Offending class: javax/servlet/Servlet.class
    Logger Contructor
    Servlet Context has been initialized
    Jul 25, 2012 11:11:45 PM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory C:\Junkyard\apache-tomcat-7.0.29\webap
    ps\docs
    Jul 25, 2012 11:11:45 PM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory C:\Junkyard\apache-tomcat-7.0.29\webap
    ps\examples
    Jul 25, 2012 11:11:46 PM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory C:\Junkyard\apache-tomcat-7.0.29\webap
    ps\host-manager
    Jul 25, 2012 11:11:46 PM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory C:\Junkyard\apache-tomcat-7.0.29\webap
    ps\manager
    Jul 25, 2012 11:11:46 PM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory C:\Junkyard\apache-tomcat-7.0.29\webap
    ps\ROOT
    Jul 25, 2012 11:11:46 PM org.apache.coyote.AbstractProtocol start
    INFO: Starting ProtocolHandler ["http-apr-8080"]
    Jul 25, 2012 11:11:46 PM org.apache.coyote.AbstractProtocol start
    INFO: Starting ProtocolHandler ["ajp-apr-8009"]
    Jul 25, 2012 11:11:46 PM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 2728 ms
    Edited by: 948555 on Jul 25, 2012 10:42 AM

  • While playing facebook games, I cannot post request for items.

    When I am playing my facebook games, I am unable to post requests for animals and items needed to play. For example If I am trying to get my friends to send me animals for my farm, it will not post the request.

    rthec wrote:
    I've seen some of the threads regarding this but none of the fixes work for me.  I formatted my hard drive for reasons other than this so it has a fresh install of Windows XP Home Edition, the latest video drivers, and the latest Flash.  When my wife plays Cityville or Castleville, her computer shuts down.  I checked the system logs and nothing is there regarding the shutdown.  I tried changing the hardware exiliration setting and that didn't help.  We've tried the games on Firefox and IE 8 with the latest updates and it still doesn't work.  Any help will be appriciated.
    The operating system, XP in this particular case, will shutdown the system to prevent damage to hardware if it encounters an instruction which can damage the system. It will usually logs an event which you can view by clicking Start, then in the Run field, type eventvwr.msc and click OK. Then open the both the "System" and "Application" submenus and look for events which are prefixed with a white X inside a red circle. The 6th column from the left will contain the Event ID which can be used to try and track down the source of the problem.

  • Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5

     
    Hi All,
    I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
    Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
    My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
    My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
    Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
    SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
    FROM (SELECT CASE Isnumeric(
    accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
    WHEN 1 THEN Cast(
    fact_highweedsandgrassdetails.vendorinvoiceamount AS
    VARCHAR(
    10))
    END AS
    Total_Dollar_Amount,
    fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township AS
    CaseTownship,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag AS
    CaseReferredToLegalFlag,
    fact_casedetails.macinitiatedflag AS
    CaseMACInitiatedFlag,
    fact_casedetails.conversionstatusdesc AS
    CaseConversionStatusDesc,
    fact_casedetails.assignedstaff AS
    CaseAssignedStaff,
    fact_casedetails.completedstaff AS
    CaseCompletedStaff,
    fact_casedetails.closedbystaff AS
    CaseClosedByStaff,
    fact_casedetails.initiator AS
    CaseInitiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    DECIMAL(6, 2))
    AS
    DaysOpen,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursOpenToMow,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursAssignedToMow,
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END AS
    NumberComplete,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate IS
    NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate
    <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHoursOLD,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHours,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
    Assigned_Department_Staff,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
    'HWG', 0)
    , '-', 0)) AS compliancejoin,
    fact_highweedsandgrassdetails.maccomments AS Expr1,
    dbo.dim_highweedscensustracts.b1_census_tract
    FROM dbo.fact_highweedsandgrassdetails
    INNER JOIN dbo.fact_casedetails
    ON fact_highweedsandgrassdetails.casenumber =
    fact_casedetails.casenumber
    INNER JOIN dbo.dim_highweedscensustracts
    ON fact_highweedsandgrassdetails.casenumber =
    dbo.dim_highweedscensustracts.casenumber
    GROUP BY fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag,
    fact_casedetails.macinitiatedflag,
    fact_casedetails.conversionstatusdesc,
    fact_casedetails.assignedstaff,
    fact_casedetails.completedstaff,
    fact_casedetails.closedbystaff,
    fact_casedetails.initiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    fact_highweedsandgrassdetails.vendormoweddatetime,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate
    IS NOT NULL
    AND
    fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE
    fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)),
    Cast(Datediff(ss,
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN
    ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(18, 2)) * 60,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]'),
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(
    Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
    , '-', 0)),
    fact_highweedsandgrassdetails.maccomments,
    dbo.dim_highweedscensustracts.b1_census_tract) AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
    ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    ASC
    SV

    I just counted the columns from the top:
    1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
    I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
    I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
    might be staring on the wrong column.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 6.

    Hi All,
    I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
    Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
    My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
    My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
    Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
    SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
    FROM (SELECT CASE Isnumeric(
    accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
    WHEN 1 THEN Cast(
    fact_highweedsandgrassdetails.vendorinvoiceamount AS
    VARCHAR(
    10))
    END AS
    Total_Dollar_Amount,
    fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township AS
    CaseTownship,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag AS
    CaseReferredToLegalFlag,
    fact_casedetails.macinitiatedflag AS
    CaseMACInitiatedFlag,
    fact_casedetails.conversionstatusdesc AS
    CaseConversionStatusDesc,
    fact_casedetails.assignedstaff AS
    CaseAssignedStaff,
    fact_casedetails.completedstaff AS
    CaseCompletedStaff,
    fact_casedetails.closedbystaff AS
    CaseClosedByStaff,
    fact_casedetails.initiator AS
    CaseInitiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    DECIMAL(6, 2))
    AS
    DaysOpen,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursOpenToMow,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursAssignedToMow,
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END AS
    NumberComplete,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate IS
    NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate
    <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHoursOLD,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHours,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
    Assigned_Department_Staff,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
    'HWG', 0)
    , '-', 0)) AS compliancejoin,
    fact_highweedsandgrassdetails.maccomments AS Expr1,
    dbo.dim_highweedscensustracts.b1_census_tract
    FROM dbo.fact_highweedsandgrassdetails
    INNER JOIN dbo.fact_casedetails
    ON fact_highweedsandgrassdetails.casenumber =
    fact_casedetails.casenumber
    INNER JOIN dbo.dim_highweedscensustracts
    ON fact_highweedsandgrassdetails.casenumber =
    dbo.dim_highweedscensustracts.casenumber
    GROUP BY fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag,
    fact_casedetails.macinitiatedflag,
    fact_casedetails.conversionstatusdesc,
    fact_casedetails.assignedstaff,
    fact_casedetails.completedstaff,
    fact_casedetails.closedbystaff,
    fact_casedetails.initiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    fact_highweedsandgrassdetails.vendormoweddatetime,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate
    IS NOT NULL
    AND
    fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE
    fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)),
    Cast(Datediff(ss,
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN
    ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(18, 2)) * 60,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]'),
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(
    Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
    , '-', 0)),
    fact_highweedsandgrassdetails.maccomments,
    dbo.dim_highweedscensustracts.b1_census_tract) AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
    ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    ASC
    SV

    I just counted the columns from the top:
    1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
    I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
    I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
    might be staring on the wrong column.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Sharepoint 2013 : Server was unable to process request. --- Site is not configured for Claims Forms Authentication.

    In our java web application trying  establish the connection for sharePoint 2013
    using  Windows claims authentication (NTLM ), I am getting error message "Server was unable to process request. ---> Site is not configured for Claims Forms Authentication". But In the Sharepoint 2013 our Site is is configured for Windows
    claims only.
    In the Sharepoint 2013 server in the IIS manager settings for authentication it is  enabled for both Windows claims and Forms authentication,
    but if I disable Forms authentication that I will be able to connect it through my application but with the direct access i.e., by running the URL in the browser I am not able to connect getting error message "sorry this site has not been shared with
    you" in the browser  Kindly help me on this.

    Hi,
    This issue is always caused that you had missed FBA configuration in web config of your web application.
    You can configure the FBA authentication then check whether it works.
    http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
    http://chrisbarba.com/2013/07/16/sharepoint-2013-forms-based-authentication-fba/
    more reference:
    http://stackoverflow.com/questions/5686378/sharepoint-2010-claim-base-authentication-error
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82dcd4-0e57-4de5-81bc-60ffc3cb9a9f/sharepoint-2010-claim-authentication-and-authenticationasmx?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Unable to check in for change request

    Hi,
    We have enabled checkin checkout functionality for ChaRM in solman_directory,
    Once we create change request for a business process from solman_directory,e we checkout structure object for that change request into assigned maintenance project., before authorizing change request.
    Once change request is completed ,we want to check in the structure object, but not getting the option  under Change Request->Transaction Type=>Customer fields->Solution->right click on assigned business process.
    Also tried by changing the phases of maintence cycle but no use, all requests are remained pending in check out,
    Please suggest.
    Thanks
    Sonal

    Dear Anzar,
    What is the error message you are getting. check the CMS logs for the more information.
    Please check n verify location of the inbox folder when you click on checkin tab.
    refer to SAP Notes 872892.
    Best Regards
    Arun Jaiswal

  • Unable to compile class for JSP. apache-tomcat-6. What could be wrong?

    Hello, I am new to JSP and I am trying a very basic jsp and class file on Windows XP. I get the Unable to compile class for JSP.
    Steps that I have done:
    javac ch06_01.java , placed the ch06_01.class under
    C:\Apps\apache-tomcat-6.0.16\webapps\ch06\WEB-INF\classes
    Then grabbed the ch06_02.jsp and placed it under
    C:\Apps\apache-tomcat-6.0.16\webapps\ch06\
    When I run it (by placing this into Explorer or Firefox URL
    http://localhost:8080/ch06/ch06_02.jsp) I get the error further
    below. Things I have done and made sure they are in place are:
    set up JAVA_HOME to C:\Apps\jdk1.6.0_06
    Using CATALINA_BASE: C:\Apps\apache-tomcat-6.0.16
    Using CATALINA_HOME: C:\Apps\apache-tomcat-6.0.16
    Using CATALINA_TMPDIR: C:\Apps\apache-tomcat-6.0.16\temp
    Using JRE_HOME: C:\Apps\jre1.6.0_06
    I did a google on the error and I found people saying to place the
    tools.jar from the jsk into the lib directory under CATALINA_HOME. But
    the examples still don't work. What step could I be missing? Your help is greatly
    appreciated.
    This is the simple jsp file:
    <%@ page import="ch06_01" %>
    <HTML>
    <HEAD>
    <TITLE>Using a JavaBean</TITLE>
    </HEAD>
    <BODY>
    <H1>Using a JavaBean</H1>
    <% ch06_01 messager = new ch06_01(); %>
    The message is: <%= messager.msg() %>
    </BODY>
    </HTML>
    this is the simple ch6_01 java file:
    public class ch06_01
    public ch06_01()
    public String msg()
    return "Hello from JSP!";
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented
    it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP:
    An error occurred at line: 6 in the generated java file
    The import ch06_01 cannot be resolved
    An error occurred at line: 9 in the jsp file: /ch06_02.jsp
    ch06_01 cannot be resolved to a type
    6: <BODY>
    7: <H1>Using a JavaBean</H1>
    8:
    9: <% ch06_01 messager = new ch06_01(); %>
    10:
    11: The message is: <%= messager.msg() %>
    12:
    An error occurred at line: 9 in the jsp file: /ch06_02.jsp
    ch06_01 cannot be resolved to a type
    6: <BODY>
    7: <H1>Using a JavaBean</H1>
    8:
    9: <% ch06_01 messager = new ch06_01(); %>
    10:
    11: The message is: <%= messager.msg() %>
    12:
    Stacktrace:
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:92)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:423)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:316)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:294)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:281)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    Edited by: indikon1 on Jun 12, 2008 1:18 PM
    I just updated the directories of the variables to reflect the current status of my system.

    What is wrong is that you are using an "old" jsp tutorial :-)
    Since Java 1.4, JSPs have been unable to access classes in the "default" package.
    What you need to do:
    Put the java class ch06_01 in a package.
    Steps to do this
    - Edit ch06_01 and add the following to the very top of the file (without the quotes): "package mypackage;"
    - create a folder "mypackage"
    - move ch06_01.java into that folder
    - compile that class (now in the mypackage package)
    - place ch06_01.class under C:\Apps\apache-tomcat-6.0.16\webapps\ch06\WEB-INF\classes\mypackage
    In your jsp:
    <%@ page import="mypackage.ch06_01" %>
    I would suggest using a more up-to-date tutorial that uses JSTL.
    Take a look at this [Apache Tomcat tutorial|http://www.coreservlets.com/Apache-Tomcat-Tutorial/index.html]

Maybe you are looking for

  • [SOLVED] Problem with shell and escape colors

    Ok, here what I do [danbst@localhost ppp]$ export | grep ps -i declare -x PS1="[\\u@\\h \\W]\\\$ " declare -x PS2="> " declare -x PS3="> " declare -x PS4="+ " [danbst@localhost ppp]$ export PS1="[\\u \033[0m @\\h \\W]\\\$ " [danbst @localhost ppp]$ [

  • Unable to reference item value in report region cursor

    I've worked on this for a couple of days now and cannot figure out what is going wrong. I have a report that I have created, using database links. Below is the code for my report: declare v_sql varchar2(32000) := null; v_curr_sql varchar2(32000) := n

  • TV preview monitor shows "wriggled" top part

    I just bought a separate TV monitor, connected to Firewire via my Sony DVcam When I play back sequences, the top 10% of the TV screen 'wriggles' The rest of the picture is fine. I use a S-video connection between the DV cam and the TV monitor andI us

  • Questions when using TOAD

    Sorry. I know this is ORACLE forum. But I assume here should be lots of folks using TOAD. Q1. how to stop a running query? Q2. how to copy all the data result? in TOAD, the returned data display in grid. I need to copy all into excel sometimes. How t

  • Graphic view when entering SDP94 planning book

    Hi, do some of you know if there is a possibility for setting the DP planning book up, so it always will start with the graphic view ?? Instead of starting with the table view This only for single users ??? Thanks in advance Jan Juhl