Unable to install Boot Camp and Windows 8.1 on Mac Mini

Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I  settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
Doug

Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

Similar Messages

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

    I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
    I am worried that  may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

    Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
    If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
    The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
    You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

  • Trouble installing Boot Camp and Windows 8

    I'm attempting to install Boot Camp for the first time using OS X 10.10.1 / Boot Camp 5.1.2. When I conduct the install, I get a message stating that this machine (Macbook Air, Late 2010) can only install Windows 7.
    Apple's Documentation states the following:
    The Windows ISO image or DVD must be of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, Windows 8 Pro, Windows 8.1, or Windows 8.1 Pro.
    I did attempt to install W8, but was asked to provide W7 installation media. Based on the documentation I should be able to install Windows 8. Any thoughts or suggestions? Thanks

    You cannot install Win 8 on that model. See the following: Boot Camp- System requirements for Microsoft Windows operating systems - Apple Support.

  • I installed Boot Camp on Windows 7 PC (No Mac computer!)

    I was trying to install drivers in order to use a Magic TrackPad that I got.  I read somewhere that I had to use/install Boot Camp on my PC.  Well, I did so... however, I have no Mac... it's a 100% Windows 7 PC.  So, I was able to install Boot Camp 3.0 and 3.1 (I think!)  When I try to boot my machine, it will NOT boot anymore.  What can I do? Could someone please help me? I noticed that the name of my main C: drive changed to "BootCamp"... it did this automatically.  I tried to fix the MBR via the Windows 7 Installation DVD, but no success. :-(  Someone, please help!
    Thank you!
    Minime is not evil anymore!

    No, I cannot do a system restore as there is/was not any system restore point.  I do not care about the drivers for the Magic Trackpad anymore... I just want to get my PC back to the way it used to be... in other words, I'd like to have it boot again. I am able to 'see' the contents of the Hard Drive by means of the Windows 7 DVD; have tried to fix the MBR by doing bootsect /fixmbr and other commands, but still no success.
    Is there ANY WAY to get rid of BootCamp or undo whatever Boot Camp has done to my HD by means of a Linux CD or Windows 7 Installation CD or anything else? Is the MBR what has been changed? Any GOOD ideas or suggestions will be welcome.  Please, forget about the Magic Trackpad... I just want to get Windows 7 to boot again.
    Thanks.

  • Boot Camp and Windows XP right-click

    I have a Mac Book Pro where I have installed Boot Camp and Windows XP with great success. I have one problem; I can not right-click. When I press ctrl+mousepad button it still works as an left-click. Very frustrating. Can anyone please help? And no, I do not have an external mouse
    Best regards
    EtronX
    Mac Book Pro   Mac OS X (10.4.8)  

    Sorry folks Did a search here in the forum and found the answer. To quick

  • HT1846 can i install boot camp and run explorer 9 on my mack

    I need to be able to use Internet explorer (7 or higher) on my Mac.  If I install boot camp and windows will I be able to?

    Yes.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Lion, Boot Camp and Windows 7 Issues

    Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
    Let me start off with my specs and then I will ask my questions:
    iMac 27"
    i7 Quad Core (1st gen)
    16GB Ram
    1TB HDD
    OS X Lion (Fresh Install - Not Upgrade)
    All updates for OS and iLife and other installed software:
    Adobe Creative Suite CS5
    MS Office 2011
    Boot Camp 4.0
    Window 7 Ultimate
    Ok... here are my questions.
    When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
    What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
    However, when I resart i can hold down the ALT key and get this menu:
    I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
    After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
    Overview:
    Why do I get the Tuxera NTFS error?
    Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
    I can't get Windows to update? Any ideas?
    Thanks for any help you can provide.

    These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
    As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

  • Boot Camp and Windows 7 Problems

    I have found a reproducible bug with Boot Camp and WIndows 7.
    Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
    Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
    I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
    After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
    Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
    Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

    Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

  • On boot camp and windows 7 cannot use dimmability keys on wireless apple keyboard.

    Hello,
    I am using boot camp under windows 7 on my mac book air.
    However the dimability keys and sounds keys cannot be used with my wireless keyboard.
    Do you know how to fix this ?
    Many thanks

    The 2007 MacBook Pro only supports 32-bit Windows 7 through Boot Camp although it has got a 64-bit processor, so buy a 32-bit Windows 7 version.
    Boot Camp Assistant (in /Applications/Utilities) will guide you through the steps to install Windows through Boot Camp. Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • Boot Camp and Windows XP Questions

    I have a new intel iMac and want to install Windows XP (just for kicks, really). I have a copy of a Windows XP disc that I bought for my dad a couple of years ago. The Boot Camp page says that you have to have Windows XP with Service Pack 2. How do I know if my XP has Service Pack 2?? I went to the windows home page, and one can download Service Pack 2, but the Boot Camp instructions seem to imply that you have to have a copy of Windows XP with Service Pack 2. Anyone have any insight? Will my XP work?
    iMac Intel, Powerbook G4   Mac OS X (10.4.6)  

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta

  • I have a Mac mini mid 2010. I have ML installed on one of the 500GB disks. I want to install Boot Camp on the 2nd 500GB disk. Mine is XP Professional.

    I have a Mac mini mid 2010. I recently installed ML on one of the 500GB disks. I want to install Boot Camp on the 2nd 500GB disk. Mine is XP Professional. My original OS was Snow Leopard Server edition. Please let me have your suggestions and advice. Thank you. I am in India.

    Mountain Lion Boot Camp no longer supports Windows XP, it would also only prepare the same physical disk you run the Boot Camp Utility from i.e. the Mountain Lion disk.
    See http://support.apple.com/kb/ht4818#3
    I suggest you start off with the second drive formatted as a single HFS+ volume with a GUID partition scheme, then install Snow Leopard on it. Then boot with Snow Leopard and run its version of Boot Camp utility, when you tell it to prepare the (second) drive you can tell it to allocate the minimum to Snow Leopard and the maximum to Windows. Then you can install Windows XP.
    Note: Boot Camp Utility was not included with Snow Leopard Server.

  • Will boot camp run windows XP on a Mac book pro retina

    Will boot camp run windows XP on a Mac book pro retina

    No. The newest Mac OS X version capable of setting up Windows XP or Vista in Boot Camp is 10.6.8, which is too old for that Mac model.
    You may be able to use it inside a product such as VirtualBox, Parallels Desktop, or VMware Fusion.
    (126968)

  • Unable to install Boot Camp Update 3.1 on Windows 7 32-bit on MacBook Pro

    I have Windows 7 Professional 32-bit on my MacBook Pro and have Boot Camp 3.0 now. I've tried to install Boot Camp 3.1 both using the Apple Software Update on Windows and the installation from http://support.apple.com/kb/dl996 but it won't work. Are there any ways to solve this problem?
    Message was edited by: Ho Ren Sen

    Hi and welcome to Discussions,
    do you have any kind of Remote Viewing software installed, like LogMeIn or Go To My PC ?
    These are known to cause trouble with the the BC Driver packages.
    Check if there are additional Graphics Adapter shown (apart from the "real" one).
    If so, uninstall the remote software, do the 3.1 update and then reinstall.
    Regards
    Stefan

Maybe you are looking for

  • How to implement start & stop triggers when # scans unknown on ni5112?

    I want to initiate a data capture trigger on the leading edge of a pulse & then stop the trigger on the next leading edge of the same pulse, using NI 5112 Scope card & LabVIEW v5.1. How to accomplish?? Any help appreciated!

  • How to make a Storybook Template on Author

    I have noticed in the ibookstore that there are several books like The Ugly Duckling that have templates resembling storybooks, where you can swipe the page vertically and a page flipping animation will flip you to the next page as if it were an actu

  • Problem updating JTree via RMI

    I'm programming an Instant Messenger application in Java using RMI extensively. Much like most IM applications, my IM clients display a "buddy list" window upon successful authentication with the server. I have reached a huge stumbling block at this

  • 2 errors in 10g agent

    Hope somebody can help :-) Have one server with grid control installed 10g. Another server with rdbms 10g and in a seperate dirictory the 10g agent. Both sites are starting up, but in the agent trace file I can see following errors: a) 2004-02-18 14:

  • Don't Have Permissions to View TM Backups?

    Not long ago, I began to use Time Machine with an external hard drive. It's work very well ... until now. I have 4 internal hard drives, all of which are backing up to TM (on the external hard drive). Today, I neede to restore a file from one of the