Unable to Install HP L7680 Drivers/SW on OS 10.8.4

I just got my new Air and need to installmy HP Office Jet Pro L7680 all-in-one printer on my machine.  When the system goes out to the server, I receive a error message that the software is not available on the server.
Hp dirrects me back to Apple for the drivers. 
Can you help me find the right dirvers/SW to use my printer?
Thanks

Install these drivers (NOT thru App store/update):
http://support.apple.com/kb/dl907
Then reset the printing system:
http://support.apple.com/kb/PH11143
Then, add the printer in Print & scan prefs.

Similar Messages

  • I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the  new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

    I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the  new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

    Thanks for your prompt reply. I'm not sure how to connect to the monitor as the only ports available on this model mac are Thunderbolt. The mini display to display cable supplied doesn't seem to work out of the TB port. Do I need to use a Thunderbolt cable + an adaptor?

  • Unable to install Boot Camp Drivers for Windows

    Mac Pro (2) 3.2 Xeon quads
    Mac OS 10.5.2
    Boot Camp side - Windows XP pro x64 w/SP2
    Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
    Maybe the XP pro x64 is not compatible?
    Barry in St. Louis

    I did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
    When trying to install boot camp drivers, a message came up saying:
    Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
    The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
    Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help??

  • Unable to install nvidea Video drivers after Bios update - Latitude E6530

    I recently flashed my bios to the newest version
    E6530A16.exe | Windows/DOS (9 MB)
    Release date 23 Oct 2014|Last Updated 23 Oct 2014
    Version A16,A16 
    After that I can't install video drivers.  So I can't connect another monitor to my computer.
    This is the driver I'm trying to install, 
    "nVIDIA Graphics Driver for: Quadro 1/2/3/4000, Quadro 5010M, Quadro K1/2/3/4/5000M, Quadro K11/21/31/41/5100M, NVS 4/5200M, and GeForce GT 720M"
    Version 9.18.13.2762,A07
    I've also tried the Intel driver on the support page.
    I'm running Windows 8.1x64 Professional and am up to date with all Microsoft patches.
    The error I get is "The graphics driver could not find suitable hardware"

    Hi hreinn1000,
    I’d advise that you load defaults in the BIOS. Please follow the steps mentioned below to load the BIOS to defaults to check if the camera gets detected on the system.
    Reboot the computer.
    When prompted during POST, press the <F2> key to enter the setup screen.
    On the System Setup screen, press the <F9> key.
    Press the <Enter> key on Yes to Load Optimized Defaults and restart the computer.
    Also, Also, I would suggest that you run the diagnostics on the computer by following the steps mentioned in the video below and check if there is any issue with the hardware on your system. Please private message us the system service tag so that we could check and assist you further. To send a private message, click on my name and send private message.
    http://dell.to/164l6g4

  • Unable to install new display drivers

    When I'm in Windows 7, I want to update my display drivers because the ones I have are very old. However, when I try to install them using the Catalyst-program from ATI, they say everything installed, but nothing is there. I've checked the install catalogue, but it's empty. I've checked on Device Manager on my display drivers, and it's still the old one.
    The one I have installed is version 8.661.0.0, dated 2009-09-23. The newest one is like 10.2.
    This is seemingly affecting the performance on my computer because I can't use the new drivers.
    I've tried uninstalling the old ones and installing the new, didn't work. Tried using Driver Sweeper, didn't work. I don't know what to do, or if it's even possible to upgrade the drivers.
    I have ATI Radeon HD 4850.
    null

    I have installed the 10.3 on my 27" imac. i was able to play games on it with no problems.. xD
    installing it was pretty easy,
    1) install Catalyst 10.3 and follow the steps until you reached the finish page
    2) go to your Device Manager and look for Display Adapter
    3) click on it, and a sub tab should appear, mine was ATI radeon HD 4670
    4) right click and click update driver
    5) there should be 2 options which is search online and find on your disk...
    6) choose the second option
    7) that should bring you to the next page which you should click on the 'I have the file' option
    8) this should you bring you to a page with existing drivers
    9) click on have disk
    10) and search for the ATI file which you download.
    11) follow along the path, ATI>10_3xxxxxx>*something inbetween* > package>display>CL_xxx file ( i am currently not on the windows and just rambling based on memory, so pardon me.. =P)
    11) after selecting OK it should display a long list of drivers inwhich you just find yours
    12) install! the com should prompt you about how unsafe it is, but just click OK
    13) after the driver is install, it should be okay to try any games without any error.
    I hope this help you, but i do have one problem... once i have installed the driver, it works fine, but when i restart my computer, it will have a BSOD and i would have to restart and reinstall the driver... i'm pretty sure something is wrong with it... so if anyone has the same problem and have found a solution, please do tell me!... xD

  • Unable to install latest Nvidia drivers. (GT72)

    I just got my GT72 in the mail and now I'm about setting it up.
    When I tried installing the latest Nvidia drivers (340.52-notebook-win8-win7-64bit-international-whql.exe)
    and the setup failed with an error that it can't find any compatible graphic adapter.
    The Nvidia drivers that was running on the GT72 was 333.something, I don't remember.
    I tried uninstalling this driver that I had just the "Microsoft basic VGA adapter", but the Nvidia Setup is still not working.
    And yes, I was making sure that I switched the graphics to NVIDIA before installing the driver.
    Any suggestions?

    Follow these steps to do s fresh clean installation of any version of nvidia drivers:-
    Press "Windows Key" + "R" together and type %temp% then press "Ok".
    In that new window, press “Ctrl” + “A” together to select all the files and folders
    Then press “Shift” + “Delete” to remove them. (leave few files which you are not able to delete)
    Try "Display Driver Uninstaller (DDU) " to completely uninstall AMD/NVIDIA graphics card drivers and packages from your system, without leaving leftovers behind (including registry keys, folders and files, driver store) :
    http://www.wagnardmobile.com/DDU/
    1. Better to create a "system restore" point before using it.
    2. You do NOT need to uninstall "NVIDIA Graphics" drivers before using DDU
    3. Open the link and click on "Download" button. It will open another page, select the topmost "Download" button for the latest version.
    4. Then run : "DisplayDriverUninstaller.exe" file
    5. It will give you a notice to create "Restore Point", so better to create one ( if not created earlier ).
    6. Click "No" when it asks "Reboot in safe mode now ?"
    7. Select Nvidia from the dropdown menu on the top, Select all the 5 checkboxes there. Then click on "Clean and Restart" button.
    8. try "Perform Clean Installation" while installing the latest driver

  • Unable to install ME, chipset drivers on MSI GD-65 Z87 Gaming

    I have no idea what's the reason. Tried re-installing Windows 8.1 and it still gives me an error when trying to install. I was on BIOS 1.5 and then updated to the latest BIOS and same problem. Anyone knows how to fix this please?

    Quote from: Sawa on 22-November-14, 22:11:43
    I suggest you upgrade Windows as much as possible (with windows update) as until it recognizes the [PCI Simple Communication Device] driver (that's the missing driver name).
    Windows ME (PCI S.C.D.) for the mobo can't install because the installation fails for the lack of a windows subroutine installed with some windows update upgrade.
    I had the very same problem on Win7 (both Prof. and Ultimate). Problem was solved with the complete installation of the SP1 (around 400mb of stuff to be downloaded in different times and reboots. You may feel you are forced windows to check out for upgrades because it could not do it, itself).
    Hope it aids! 
    Thanks and I have updated Windows Update to the maximum (no more new updates) and I still can't install any of these drivers. The ME, chipset drivers won't work and I can't even use iTunes because it couldn't detect my iPhone/iPad. I can do everything perfectly fine on my other i3 PC running on an ASUS board.
    Why is MSI giving so much of problems? :(

  • Unable to install windows 7 drivers

    Hi, I have installed windows 7 using the bootcamp created USB. Before I did that, I have also downloaded and saved the Windows Support files to a separate USB. After I installed windows, I tried to install the drivers, but windows couldn't read the USB because it is missing the drivers. (which are on the USB).
    *Sidenote* I have also installed windows 7 using the bootcamp on my macbook pro. I had the same driver issue, so I just burned the drivers to a CD, but the mac mini doesn't have an optical drive.

    Hello everyone,
    As the struggle was real, I thought I would also participate in this thread and share my testimonial with you.
    For more than a week, I had been attempting to set up Windows 7 x64 on my mid-2014 MacBook Air 13", but to no avail. I was so sick of witnessing the infamous black screen, "no bootable device -- insert boot disk and press any key", or the "select your language" window in the Windows 7 PE with no keyboard nor mouse alive, that I had almost given up on it all.
    But that was before I came across the present thread. I diligently applied your procedure and IT WORKED LIKE MAGIC
    My specs:
    - Mid-2014 MacBook Air 13" with pre-installed Mac OS 10.9 (Mavericks)
    - Windows 7 x64 Home Premium ISO file
    - The most basic USB 2.0 flashdrive one can get
    - (Note: I did not have rEFIt installed)
    You must be some kind of wizard. I signed up just to upvote this, no kidding!
    I sincerely wish this post gets the visibility it deserves.
    Thank you so much!
    Cheers,
    tm

  • Unable to install new drivers - Satellite 2450 (Win XP home)

    After downloading and unzipping I find I am unable to install the new drivers (power saver). the setup halts and shows messages bout being unable to execute the command.

    Hi
    What exactly Satellite 2450-xxx model do you have?
    I asked it because I have found many 2450 models with different power saver versions on the Toshiba driver download section.
    Please be sure that you install right version

  • PC Suite 7.0.8.2 don't install CA-42 drivers

    Hi all:
    A few days ago I have to reinstall my Dell D620 with Windows XP SP3 (Spanish version) from scratch.
    So I decide to install the latest pcsuite software for my Nokia 5140b... so good so fine. The installation was smooth until have to recognize the CA-42 cable.
    The Windows detect the CA-42 cable but was unable to install the correct drivers... so I'm disappointed and stuck.
    Why disappointing:
    because every one and a half release version of PCSuite gave trouble with the CA-42 drivers...For example before reinstall I was using Nokia_PC_Suite_rel_6_85_12_0_spa_co_web/Nokia_PC_Suite_6_84_10_3_spa_co_web without problems with the CA-42 cable... Before that 6.82 gave me the same problem as with 7.0.8.2. Why QA don't work with 5140/CA-42 (duo)????
    Isn't suppose that a new release keep what was working and fix the wasn't working??
    Stuck:
    because I can downgrade my PCSuite to the working release but as far I use I keeps suggesting me that there is a new version... so If I upgrade my CA-42 don't works..
    So I need to know:
    a) Is there a new release that correctly install the CA-42 drivers?
    b) How can I "expand" the .exe file to manually point windows to where the drivers are and hopefully let work my CA-42 cable??
    Thanks a lot and keep working...
    PD: For that people who will ask... yes my cable is original one (bought from a nokia reseller) and have this serial #:060020028.
    Help-->About--->info capture from actual PCSuite.
    Solución de conectividad para PC:
    versión 8.22.4.0
    Nokia Connectivity Cable Driver:
    versión 7.0.2.0

    I'm pretty fed up with the "solutions" for this problem on these discussion boards. Turning off virus checkers and firewalls to make the "improved" version of PC Suite work when the old one did just fine makes no sense to me. If I was that interested in computers I would have majored in them. I'm just mad and don't want to learn how to do Windows System commands.
    Would Nokia make previous versions of PC Suite that work available as downloads again?

  • Unable to install windows 7 on X60 says "no device drivers found"

    Hi all
    I have working lenevo think pad X60 32bit with windows XP installed on it, first time I was able to succesfuuly installed to windows 7 using clean install,everthing works great.
    Then some how my PC got infected  with virus and not able to boot it always says "recover from windows"  but could not succeded, finally wanted to re install again using windows 7 DVD
    First I set boot order from CD but it always booting from infected image from HD and displays same message.
    I have tried another option by getting into command prompt where I did access to my DVD drive and issued setup.exe
    I went couple of instructions and finally stuck where it is unable to install windows 7 by giving below error
    it says "no device drivers found" on the bottom of window and top of the window it says "where to install windows 7"
    On window I think it will expect partition details but window is empty
    I am not sure why my hard drive is not recognizing, I tried some of the drivers from this site but it could not recognize even if I select via browse
    Any one sees this beviour ? which drivers I shoud install ? in order to see my hard drive
    I still found some of my drives under X:windows\system32 but could not selecting those with windows 7 setup

    you can download pc doc http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-56222 and erase your HDD then install win. 7 this download makes a bootable disc & you can run  diagnostics with this disc
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Unable to install AMD 6770m graphic drivers for dv6t-b600, System crashes

    I have Hp pavilion dv6t-b600
    Windows 8 pro 64bit
    Product number: QJ920AV#ABA
    My laptop came with windows 7 and AMD graphic card 6770m.It worked fine with it untill the problem in fan arised. It used to heat up alot. I replaced the fan and installed windows 8.
    When i tried to install AMD drivers which i downloaded from HP official website by giving my product number it got stuck and a black screen appeared and my whole data was corrupted and i had to install new windows once again. It happened twice. I lost all of my important files in it as well. Drivers were 64 bit and for windows 8.
    I did everything right.
    Now windows is working fine withoud AMD graphic drivers again every thing works fine except the AMD drivers. I am unable to install the drivers. I just tried to install it again and while installation it says screen may flicker or completly go black during installation but when it goes black nothing happens. Its stucks.
    I have updated BIOS from F.19 to F.1C but still no luck. Please give me the solution ASAP

    Hi @Sydmobi ,
    Welcome to the HP Forums!
    It is a superb place to find answers and ideas!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you had to replace the fan on the notebook and you have installed Windows 8.
    How did you install Windows 8, was it an upgrade or a complete install from a Windows disk?
    When I checked the  HP Pavilion dv6 Notebook PC Maintenance and Service Guide  for you notebook I see that you have switchable graphics.
    As your notebook is a CTO (custom to order) I am unsure if you have dual AMD GPUs or Intel +Amd GPUs so I am including both links.
    Here are  links that you should find informative and helpful.
    Overview of Switchable Graphics or Dual GPUs
    Switchable Graphics on Notebooks Configured with Dual AMD GPUs
    Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
    Here is a link to the HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Drivers.
    Download and save the chipset driver, and both graphic drivers.
    Delete the current drivers the chipset
    Install the chipset driver and restart your notebook.  Restarting the notebook is an important step and must not be omitted.
    Delete the graphic drivers
    Now install the graphics drivers.
    Restart your notebook.
    If you are still unable to install the driver, I suggest contacting HP support for assistance.
    Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Unable to instal VOX USB 2.0 drivers in WINDOWS XP Prof. SP2

    Hi,
    I am unable to instal drivers in Windows XP Prof. SP2 for VOX USB 2.0. When I instal drivers from manufacturer's CD, instalation tells me, that it cannot instal some update for XP SP1. But I have SP2, so it should be OK. Then, after computer restart, I connected VOX and windows could not recognize it and asked me for drivers. I tried to instal drivers manually from the cd, but windows always tells me, that it cannot find driver on CD. I tried to download latest drivers from MSI website, but I had the same problem with it. What should I do? I am unable to use the TV tuner 
    Could anybody write me exact procedure how to instal it, please please!
    Thank You very much.
    (I have tried to instal it on another computer with Windows XP Prof. SP2 and it did not work also. The same problem.)

    Yes, my system has USB 2.0. It is P4 2.4GHz Northwood, motherboard: MSI 648 Max, 1GB of DDRAM (333MHz), MSI GeForce 4 MX 460, SoundBlaster Live! player 1024, pci card with aditional USB 2.0 ports (NEC chipset), SIS 900 pci NIC, 2x WesternDigital Caviar 1200JB, pci IDE controller SiliconImage 0680a (harddisks are not connected as RAID), DVD-ROM Pioneer, DVD burner LG GSA-4163B.
    I have tried to connect VOX directly to USB port on motherboard and also to NEC USB pci card, but it did not work anyway.
    I have disconnected all USB devices from the computer, except the mouse.
    Windows is updated from MS Windowsupdate website.  I use Windows XP SP2 firewall and Microsoft Antispyware beta and antivirus software (I have tried to turn them off during the TV VOX installation, but it did not help).
    And I  also use power supply for TV VOX.

  • Snow Leopard and Windows 7 - Unable to locate CD/DVD drivers to install

    hi,
    I am using Boot Camp to install Windows 7, and when the installation starts, I get an error message/ popup window that states: "Unable to locate CD/DVD drivers...".
    I can't eject the CD, or figure out which drivers it needs, & how to get them.
    I've noticed a lot of people are having this same issue with various PC manufacturers and various releases of Windows 7...
    Some people have successfully avoided this by installing off of a USB drive. I am wondering if it's at all possible to install Windows 7 / Boot Camp with a USB drive... or if there is another solution to this problem.
    thanks
    ben

    hi,
    i'm replying again to my own question with more info
    basically i inserted the snow leopard and the mac os x install dvd's that shipped with my early 2009 nehalem mac pro tower into a windows machine. i was able to "explore" the dvd using windows and found some boot camp support folders which contained drivers.
    i copied these drivers to a thumb drive.
    so now, during the windows 7 install... i have the option of navigating to these drivers on my thumb drive.
    however - i don't see any potential drivers for the dvd burner/ superdrive...
    here is the list of companies/ drivers supplied:
    ATI
    Broadcom
    Marvell
    Apple
    Cirrus
    MotorolaSetup.exe
    Asix
    IDT SigmaTel
    NVidia
    Atheros
    Intel
    RealTekSetup.exe
    it is my understanding that the superdrive is hitachi...
    the information on this drive inside the system profiler is as follows:
    "HL-DT-ST DVD-RW GH41N:
    Firmware Revision: PQ05
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: Insert media and refresh to show available burn speeds"
    i really wish i knew more info about this drive and where to get windows drivers for it so i can install windows 7 on my mac pro.
    this is the stock drive that shipped with this mac pro. i find it strange that no one else is running into this issue?
    thanks
    ben

  • Unable to install hp all in one officejet x64 drivers windows 8 it

    unable to install hp all in one officejet x64 drivers windows 8 64 bit from hp website the select all button is not working.

    Hello louvallee,
    If you had upgraded  you PC OS to win 8.1 and if you were able print with the prior OS, then you may have to first uninstall the existing printer software and try step# 
    Else
    1) Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

Maybe you are looking for