Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Similar Messages

Unable to determine factor for converting from UoM DR to UoM L

Hi gurus,
I ran into an GTS block for inbound delivery which states 'Unable to determine factor for converting from UoM DR to UoM L.' Actually the PO linked to this inbound delivery was transferred succesfully.
Per above error log, I checked product master, conversion rate for DR and L was maintained. Could you shed lights where should I maintain for above error log?
Thank you,
Ryan

Hello Ryan,
There is one bug recently detected in the contex of IBD transfer, the problem is that the conversion factor isn't taken into account during the interface mapping in ERP side, SAP will provide a Note for this issue. To be more sure that you run into the exact same issue, please check wether cvqdp_flt in item of the inbound delivery is empty(/SAPSLL/CUIT-CVQDP_FLT).
Thanks,
Derek

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

What happens when you click the Save/Download button after the file conversion is complete?

I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!!

I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!! PLEASE!! Because I cannot get on my iPhone!!

Hi, Mommacat26.
Thank you for visiting Apple Support Communities.
This usually means that a required component is missing. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If the issue persists, try installing the Apple Mobile Device Support driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

When I connect my Iphone 5 to sync with my Itunes on my PC I get a message- This Iphone cannot be used because required software is not installed. Run Itunes installer to remove itunes then install itunes again.

When I connect my Iphone 5 to sync with my Itunes on my PC I get a message- This Iphone cannot be used because required software is not installed. Run Itunes installer to remove itunes then install itunes again.

After uninstalling and reinstalling Itunes- issue was fixed. Thanks!

Windows Media Player cannot play the file because the required video codec is not installed on your computer

I can not find solution to the issue "Windows Media Player cannot play the file because the required video codec is not installed on your computer" while attempting to play the file with *.wmv extension. Some computer fail in spite of said missing codec
being present according the windrows media player in Windows 7 box

If Rashid's link does not resolve it... consider the below:
A) As of this writing, the codec for GoToMeeting webinar recordings ("G2M4" codec) was only mentioned in *one* web page, of about 10 Microsoft web pages I read, to resolve this problem (and that codec is not included, yet, in their diagnostic tool),
so if you're trying to play a GoToMeeting webinar, simply get the codec for it from their site: http://www.GoToMeeting.com/codec
B) If Windows Media Player (WMP) will not even open the file, you won't be able to get the 4-character codec's name (like "G2M4") from WMP. But VLC's media player will tell you that code, even when it fails to run the video.... and then you can
search the internet for it.
C) The problem sometimes is not actually a missing codec. Other things that have helped others, some from:
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/the-windows-media-player-12-could-not-play-the-wma/bb823460-44df-4e8d-ba2c-42ec0e111e5a?page=3
(1) running the System File Checker (SFC.exe),
(2) opening WMP first (running both the 32-bit and 64-bit versions) then opening the file from inside them,
(3) confirming that WMP was the file association for WMV files,
(4) Control Panel -> Hardware and Sound -> Sound, selecting my audio device, and looking for a "5.1" setting (I didn't have one), to change to "stereo",
(5) checking Tools\Options\Devices\Speakers\Properties\Speaker Properties\AdvancedPlayback\ Speakers /HP\Properties\Advanced\Default Format, to select "CD or DVD Quality" (if that setting appears for your device),
Good luck,
-- Doug
Doug Ivison

I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device S

I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device Service and uninstall and reinstall Itunes but still giving me the same error.

http://support.apple.com/kb/HT3965

Whenever I launch a new Google window, Google immediately re-opens all other windows I happen to have open but minimized. I then have to either close or re-minimize each window, one at a time. What a pain!!

Whenever I launch a new Google window, Google immediately re-opens all other windows I happen to have open but minimized. I then have to either close or re-minimize each window, one at a time. What a pain!!

Just to address the last point: check your History menu to see whether you have the Restore Previous Session option and use that if you can. If that is grayed out or doesn't restore everything, check the Recently Closed Windows and Recently Closed Tabs lists for other pages.
The unwanted window may be generated by an add-on. Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
Here are some other things to check:
(1) user.js file that changes Firefox startup behavior and overrides your preferences. This article describes how to track that down and delete it if you have one: [[How to fix preferences that won't save]].
(2) Possible hijacked shortcut. Check the "target" of the desktop icon you use to start Firefox to see whether it lists the unwanted page. To do that:
right-click the icon > Properties > Shortcut tab
For 64-bit Windows 7, the Target should be no more and no less than this:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
(3) Possible undisclosed bundle items. If you have installed any free software recently, check your Windows Control Panel, Uninstall a program for surprises. If you click the "Installed on" column head to group by date, it is easier to spot bundled junk. Remove everything suspicious or unrecognized.
(4) Supplemental clean up scans. Our support article lists tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
Hopefully that cures it.

Website suddenly not appearing correctly in Firefox under Windows 7

I've had a website running for a couple of years now with no problems, but one of my clients sent me an email saying it's not appearing correctly on her system, Windows 7 runnning Firefox v. 15. I am on a MAC and have looked at the site on 4 different browsers and it looks fine, I also installed Firefox (v. 16) on a PC running Windows 7 and it looks fine there. Near as I recall I haven't made any changes to the site's structure, so I'm stumped. The website is http://www.horizonwings.org. Can anyone help? I've attached a couple of screen captures showing what she sees. Thank you.

I see the same problem as your client in Firefox 16 on Windows 7. To fix the problem, add clear: left to the style for leftColMain
#leftColMain {
    clear: left;     float: left;
    padding: 30px 0 0;
    position: relative;
    width: 210px;

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

Hi Ken,
Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
I am looking at a product called wmobile, but may be problematic on my current system.
thanks for any help...

I can download yosemite but then it will not install? I am stuck with the icon on the dock with the downward arrow in it but when I double click on it or try to open it nothing happens. Thanks.

I can download yosemite but then it will not install? I am stuck with the icon on the dock with the downward arrow in it but when I double click on it or try to open it nothing happens. Thanks.

This is a DUPLICATE request.
:See response in https://support.mozilla.com/questions/893523#answer-271175

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful bu tI can not find the files on the mac. Any ideas?

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?

When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html

Unable to update apps after converting iTunes account from UK to SG

Hello all,
I have contacted support ([email protected]), and after being served by countless support staff, none could really explain to me what I should/could do. All they have done after understanding my problem is to point me to "iTunes Feedback page".
So here's the problem: I cannot seem to update my apps. This all happened when I switched stores. Previously I was using the UK iTunes store. But since I've completed my studies and returned home, I changed my billing information to a Singapore bank. Doing so converted my iTunes store account to the SG iTunes store. Clicking on the "search for updates" in the iTunes App library lists several updates available. But because I am in the SG iTunes store and my apps were previously purchased in the UK iTunes store, there is no way for me to update it.
The strange thing is that my iPhone and iPad allows me to update any app - bought from the UK or SG store - without any problems. It is just that iTunes is rather picky about updating it. I have tried deleting a UK-purchased app and re-downloading the same app in the SG iTunes store, and two things happen. The first is that I won't get charged, since it prompts me "you have already purcahsed this item". I also notice that there is the "$0.99 Buy App" and not the usual "Download" label. The second is that despite the fact that I re-downloaded the app from the SG iTunes store, it still refuses to update it.
I'm really getting annoyed at this. Does anyone have the same problem, if so, what did you do to resolve it?

Hi,
Didn't realize you were trying to access AppWorld.
Reset your password using this link.
Thanks,
Bifocals
KB24127The
error "Unable to validate the email address and password combination.
(Error Id: 30601)" is encountered when logging into BlackBerry App World
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I am unable to install Itunes 10.6 on my windows vista 64. What do I need to do to be able to install?

How can I install Itunes 10.6 on my windows Vista 64?

No, but you do at least have to buy Snow Leopard. Whether you can run it depends on what iMac you have:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57

Unable to access the internet on windows xp using bootcamp. I installed the bootcamp drivers ( from snow leopard) but it still doesn't work. I have parallels 6 also installed and IT works fine. I am missing a rtl network adapter-thanksr

Hi
I have a new 21 inch imac oct 2011 version. I installed bootcamp and windows xp on my machine and i also installed parallels 6.
Paralleles works great and i can open any program with it. But bootcamp also works EXCEPT it refuses to give me access to the internet. I installed the bootcamp drivers from my snow leopard disk, it did not make a difference. All the drivers installed but still no internet. I then installed the bootcamp drivers from the gray mac osx disk (#1) but it stopped installing with an error number ( 2753) and it said that the package was damaged.
I have tried everything; i opened each disk and trieed installing the files separately. Nothing.
What i see missing in my devices screen in XP is the network adapter.
I have a router (dlink-dr615) and it is connected by ethernet to my imac. I wonder if THIS might have anything to do with the problem. Any guidance would be much appreciated.
Thank you

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Similar Messages

Maybe you are looking for