Unable to install LELA Platform

Hello, I am running on a Windows Vista Service Pack 2 x32. I am using a WRT310N router and I am unable to install LELA. Whenever I attempt to install LELA, it stops at Installing PlatformSteup.exe and gives me an error message saying "Linksys EasyLink Advisor Platform failed to installed. Please retry." (Yes, it said "failed to installed"). Any help would be greatly appreciated, as I cannot configure my Linksys router. Thanks.

mastia wrote:
... but I know that LELA has a lot more to offer.
Not really. The only feature that I thought would be worthwhile is the ability to track intruders and monitor network activity. I have a working version of LELA and the lag between changes to the network and LELA reporting them is so large that the features I have mentioned before are useless. If you want something with a similar feature set to LELA I've heard that Network Magic is quite good, although I can't speak from personal experience.

Similar Messages

  • Unable to install Intel Dynamic Platform and Thermal Framework on Yoga 13

    I recently purchased a Yoga 13. I just got Windows 8 Enterprise installed on there. I am unable to install Intel Dynamic and Thermal Framework. I downloaded this directly from Lenovo Support (the file is labeled "Dynamic Platform and Thermal Framework for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13").
    During installation, the service agreement is in another language (Chinese, perhaps). When the installer starts running, I immediately get an error:
    "The setup program failed to install one or more device drivers. Setup will exit."
    And that's it. What do I have to do to get this to install? Am I downloading the right version? I don't see another version to download anywhere. I tried finding the software on Intel, but I was unable to. When using Intel® Driver Update Utility, it recognizes hardware that needs drivers, but it does not give me the Dynamic Platform download.
    Any help is appreciated.

    Sorry, I don't think this will help, but...
    I have been investigating why my Yoga-13 might be freezing up (about once every other day). While looking at errors in the event log, I came across errors that led to the following sites when I googled the error:
    http://en.community.dell.com/support-forums/laptop/f/3518/p/19481625/20262664.aspx
    http://forum.notebookreview.com/dell-xps-studio-xps/650572-new-dell-xps-l521x-ivy-bridge-536.html#po...
    Probably not any help.
    If you do get it installed and you experience your yoga freezing up (no response to any input), please post here.

  • Unable to install Java 2 Platform Standard Edition Development Kit 1.4.2_11

    I am unable to install Java 2 Platform Standard Edition Development Kit 1.4.2_11 and NetBeans IDE 5.0 on Windows 98. I get the following message:
    Java 2 Platform Standard Edition Development Kit 1.4.2_11 cannot be installed on your computer because current account does not have sufficient privileges.
    I am trying to install at home, no network, and as far as I can tell, there is no way to give yourself "administrative privileges". Is Windows 98 not supported anymore?

    98SE is supported. See configuration requirements for the various versions.
    Try downloading Java and installing it, then go to the NetBeans site and downloading it and installing separately.

  • Unable to install Cisco Unity Express 8.5.1 on SRE-700

    Hi.
    I have a cisco 2951 router with SRE-700 module and i want to install CUE on it. My router IP configuration is as follows:
    interface GigabitEthernet0/0
    ip address 10.200.190.225 255.255.0.0
    duplex auto
    speed auto
    interface SM1/0
    ip unnumbered GigabitEthernet0/0
    service-module fail-open
    service-module ip address 10.200.190.226 255.255.0.0
    service-module ip default-gateway 10.200.190.225
    ip route 10.200.190.226 255.255.255.255 SM1/0
    and i have the following files in my FTP directory. Languages needed English and Arabic
    cue-installer.sme.8.5.1
    cue-vm-ar_SA-langpack.sme.8.5.1.prt1
    cue-vm-en_US-langpack.sme.8.5.1.prt1
    cue-vm-full-k9.sme.8.5.1.prt1
    cue-vm-installer-k9.sme.8.5.1.prt1
    cue-vm-k9.sme.8.5.1.key
    cue-vm-k9.sme.8.5.1.pkg
    cue-vm-k9.sme.8.5.1.pkg.install.sre
    cue-vm-k9.sme.8.5.1.pkg.install.sre.header
    cue-vm-langpack.sme.8.5.1.pkg
    i enter the following command
    service-module sm 1/0 install url ftp://<ip>/cue-vm-k9.sme.8.5.1.pkg
    installation starts. last message i got is "service module reset due to an error unable to install"
    Can anybody help on this?
    Regards

    Here is the output while installing CUE
    TSC-VM#service-module sm 1/0 install url
    *Mar 23 07:26:33.501: %SM_INSTALL-6-INST_RBIP: SM1/0 recei$ule sm 1/0 install url ftp://192.168.231.77/cue-vm-k9.sme.8.5.1.pkg 
    Proceed with installation? [no]: yes
    Loading cue-vm-k9.sme.8.5.1.pkg.install.sre !
    [OK - 22313/4096 bytes]
    Following languages are available for installation.
      #       SKU    Language Code           Language Name
      1       ITA         it_IT          CUE Voicemail Italian
      2       ESP         es_ES          CUE Voicemail European Spanish
      3       ENU         en_US          CUE Voicemail US English
      4       FRA         fr_FR          CUE Voicemail European French
      5       ESO         es_CO          CUE Voicemail Latin American Spanish
      6       ESM         es_MX          CUE Voicemail Mexican Spanish
      7       ARA         ar_SA          CUE Voicemail Arabic
      8       NLD         nl_NL          CUE Voicemail Dutch
      9       SVE         sv_SE          CUE Voicemail Swedish
    10       NOR         no_NO          CUE Voicemail Norwegian
    11       FRC         fr_CA          CUE Voicemail Canadian French
    12       PTG         pt_PT          CUE Voicemail Portuguese
    13       TUR         tr_TR          CUE Voicemail Turkish
    14       HUN         hu_HU          CUE Voicemail Hungarian
    15       ENG         en_GB          CUE Voicemail UK English
    16       DEU         de_DE          CUE Voicemail German
    17       DAN         da_DK          CUE Voicemail Danish
    18       PTB         pt_BR          CUE Voicemail Brazilian Portuguese
    19       KOR         ko_KR          CUE Voicemail Korean
    20       CHS         zh_CN          CUE Voicemail Mandarin Chinese
    21       JPN         ja_JP          CUE Voicemail Japanese
    22       RUS         ru_RU          CUE Voicemail Russian
    23       HBR         iw_IL          CUE Voicemail Hebrew
    You can install upto 5 language(s) on this platform.
    Please select the language(s) you want to install by entering the language number(s)
    Languages can be entered as comma separated or space separated list
    Example: 1,3 would select 'Italian' and 'US English'
    Enter languages:3, 7
    Following languages will be installed on the system:
    CUE Voicemail US English
    CUE Voicemail Arabic
    Do you want to continue with the selected options?(y/n):y
    input string: lang=no=2,CUE Voicemail US English,CUE Voicemail Arabic
    TSC-VM#
    *Mar 23 07:27:03.105: %SM_INSTALL-6-INST_RESET: SM1/0 is reset for software installation.
    *Mar 23 07:27:42.493: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
    *Mar 23 07:27:42.497: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
    *Mar 23 07:27:49.197: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
    *Mar 23 07:28:00.877: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
    *Mar 23 07:28:05.921: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
    *Mar 23 07:28:35.380: Delivery Ack could not be sent due to lack of buffers
    *Mar 23 07:28:46.764: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
    *Mar 23 07:28:46.904: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Parsing package manifest files ....
    *Mar 23 07:28:49.172: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
    *Mar 23 07:28:50.012: %SM_INSTALL-6-INST_FAIL: SM1/0 is reset due to Unable to install. Please try again.
    TSC-VM#service-module sm 1/0 status                                       
    Service Module is Cisco SM1/0
    Service Module supports session via TTY line 67
    Service Module is trying to recover from error
    Service Module heartbeat-reset is enabled
    Service Module status is not available
    No install/uninstall in progress
    My FTP Log is as follows
    #Software: Microsoft Internet Information Services 5.1
    #Version: 1.0
    #Date: 2011-03-23 07:25:44
    #Fields: time c-ip cs-method cs-uri-stem sc-status
    07:25:44 10.200.190.222 [1]USER anonymous 331
    07:25:44 10.200.190.222 [1]PASS [email protected] 230
    07:25:46 10.200.190.222 [1]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
    07:25:46 10.200.190.222 [1]QUIT - 426
    07:25:46 10.200.190.222 [2]USER anonymous 331
    07:25:46 10.200.190.222 [2]PASS [email protected] 230
    07:25:49 10.200.190.222 [2]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
    07:25:49 10.200.190.222 [2]QUIT - 226
    07:26:43 10.200.190.222 [3]USER anonymous 331
    07:26:43 10.200.190.222 [3]PASS [email protected] 230
    07:26:45 10.200.190.222 [3]sent /cue-vm-k9.sme.8.5.1.key 226
    07:26:45 10.200.190.222 [3]QUIT - 226
    07:26:45 10.200.190.222 [4]USER anonymous 331
    07:26:46 10.200.190.222 [4]PASS [email protected] 230
    07:26:48 10.200.190.222 [4]sent /cue-vm-k9.sme.8.5.1.key 226
    07:26:48 10.200.190.222 [4]QUIT - 226
    07:26:50 10.200.190.222 [5]USER anonymous 331
    07:26:50 10.200.190.222 [5]PASS [email protected] 230
    07:26:52 10.200.190.222 [5]sent /cue-installer.sme.8.5.1 426
    07:26:52 10.200.190.222 [5]QUIT - 426
    07:26:52 10.200.190.222 [6]USER anonymous 331
    07:26:52 10.200.190.222 [6]PASS [email protected] 230
    07:27:00 10.200.190.222 [6]sent /cue-installer.sme.8.5.1 226
    07:27:00 10.200.190.222 [6]QUIT - 226
    07:27:02 10.200.190.222 [7]USER anonymous 331
    07:27:02 10.200.190.222 [7]PASS [email protected] 230
    07:27:04 10.200.190.222 [7]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
    07:27:04 10.200.190.222 [7]QUIT - 226
    07:27:04 10.200.190.222 [8]USER anonymous 331
    07:27:04 10.200.190.222 [8]PASS [email protected] 230
    07:27:06 10.200.190.222 [8]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
    07:27:06 10.200.190.222 [8]QUIT - 226
    07:27:06 10.200.190.222 [9]USER anonymous 331
    07:27:07 10.200.190.222 [9]PASS [email protected] 230
    07:27:09 10.200.190.222 [9]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
    07:27:09 10.200.190.222 [9]QUIT - 426
    07:27:09 10.200.190.222 [10]USER anonymous 331
    07:27:10 10.200.190.222 [10]PASS [email protected] 230
    07:27:11 10.200.190.222 [10]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
    07:27:11 10.200.190.222 [10]QUIT - 226
    07:27:47 10.200.190.223 [11]USER anonymous 331
    07:27:47 10.200.190.223 [11]PASS [email protected] 230
    07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
    07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
    07:27:47 10.200.190.223 [11]QUIT - 226
    07:27:48 10.200.190.223 [12]USER anonymous 331
    07:27:48 10.200.190.223 [12]PASS [email protected] 230
    07:27:48 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
    07:27:49 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
    07:27:49 10.200.190.223 [12]QUIT - 226
    Please assist

  • SharePoint 2013 preinstaller error - The tool was unable to install Application Server Role, Web Server (IIS) Role.

    I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
    Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
    2014-06-23 10:13:12 - Processor architecture is (9)
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - Common Startup
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
    2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
    2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
    2014-06-23 10:13:12 - Locating the following command line arguments file:
    2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
    2014-06-23 10:13:12 - Error: This file does not exist
    2014-06-23 10:13:12 - Details of the current operating system:
    2014-06-23 10:13:12 - Major version number of the operating system:  (6)
    2014-06-23 10:13:12 - Minor version number of the operating system:  (2)
    2014-06-23 10:13:12 - Build number of the operating system:  (0X23F0=9200)
    2014-06-23 10:13:12 - Major version number of the latest Service Pack:  (0)
    2014-06-23 10:13:12 - Minor version number of the latest Service Pack:  (0)
    2014-06-23 10:13:12 - Platform ID of the operating system:  (2)
    2014-06-23 10:13:12 - Product suites available on the operating system:  (0X110=272)
    2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
    2014-06-23 10:13:12 - Product type:  (7)
    2014-06-23 10:13:12 - OS type:  (0)
    2014-06-23 10:13:12 - Configuring the application's property sheet...
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Windows Management Framework 3.0
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - PowerShellVersion
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 4.0
    2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
    2014-06-23 10:13:12 - Reading the following DWORD value/name...
    2014-06-23 10:13:12 - Install
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
    2014-06-23 10:13:12 - The value is (1)
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - Version
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 4.5.51641
    2014-06-23 10:13:12 - A post release .NET 4.5 is installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 -
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 6.1.7600.0
    2014-06-23 10:13:12 - The prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
    2014-06-23 10:13:12 - Reading version of the following file...
    2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
    2014-06-23 10:13:12 - The version is...
    2014-06-23 10:13:12 - 1.0.3010.0
    2014-06-23 10:13:12 - The prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - Version
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 10.51.2500.0
    2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Windows Server AppFabric
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - ProductVersion
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 1.1.2106.32
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - ProductVersion
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 1.1.2106.32
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - ProductVersion
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 1.1.2106.32
    2014-06-23 10:13:12 - Reading the following DWORD value/name...
    2014-06-23 10:13:12 - DCC
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
    2014-06-23 10:13:12 - The value is (1)
    2014-06-23 10:13:12 - CacheClient is Installed.
    2014-06-23 10:13:12 - Reading the following DWORD value/name...
    2014-06-23 10:13:12 - DCS
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
    2014-06-23 10:13:12 - The value is (1)
    2014-06-23 10:13:12 - CacheService is Installed.
    2014-06-23 10:13:12 - Reading the following DWORD value/name...
    2014-06-23 10:13:12 - DCA
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
    2014-06-23 10:13:12 - The value is (1)
    2014-06-23 10:13:12 - CacheAdmin is Installed.
    2014-06-23 10:13:12 - The prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 -
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 2.0.1230.0
    2014-06-23 10:13:12 - The prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 -
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 1.0.959.0
    2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
    2014-06-23 10:13:12 - Reading the following string value/name...
    2014-06-23 10:13:12 - Version
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
    2014-06-23 10:13:12 - The value is...
    2014-06-23 10:13:12 - 5.0.51212.0
    2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
    2014-06-23 10:13:12 - Reading the following DWORD value/name...
    2014-06-23 10:13:12 - IsInstalled
    2014-06-23 10:13:12 - from the following registry location...
    2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
    2014-06-23 10:13:12 - The value is (1)
    2014-06-23 10:13:12 - The prerequisite above is already installed
    2014-06-23 10:13:19 - Beginning download/installation
    2014-06-23 10:13:19 - Created thread for installer
    2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
    2014-06-23 10:13:20 - Error: Unable to install (2)
    2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
    2014-06-23 10:13:20 - Last return code (2)
    2014-06-23 10:13:20 - Reading the following DWORD value/name...
    2014-06-23 10:13:20 - Flags
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - PendingFileRenameOperations
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
    2014-06-23 10:13:20 - Reading the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
    2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
    2014-06-23 10:13:20 - Last return code (2)
    2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
    command line options.
    2014-06-23 10:13:20 - Cannot retry
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Windows Management Framework 3.0
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - PowerShellVersion
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 4.0
    2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
    2014-06-23 10:13:20 - Reading the following DWORD value/name...
    2014-06-23 10:13:20 - Install
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
    2014-06-23 10:13:20 - The value is (1)
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - Version
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 4.5.51641
    2014-06-23 10:13:20 - A post release .NET 4.5 is installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 -
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 6.1.7600.0
    2014-06-23 10:13:20 - The prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
    2014-06-23 10:13:20 - Reading version of the following file...
    2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
    2014-06-23 10:13:20 - The version is...
    2014-06-23 10:13:20 - 1.0.3010.0
    2014-06-23 10:13:20 - The prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - Version
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 10.51.2500.0
    2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Windows Server AppFabric
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - ProductVersion
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 1.1.2106.32
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - ProductVersion
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 1.1.2106.32
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - ProductVersion
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 1.1.2106.32
    2014-06-23 10:13:20 - Reading the following DWORD value/name...
    2014-06-23 10:13:20 - DCC
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
    2014-06-23 10:13:20 - The value is (1)
    2014-06-23 10:13:20 - CacheClient is Installed.
    2014-06-23 10:13:20 - Reading the following DWORD value/name...
    2014-06-23 10:13:20 - DCS
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
    2014-06-23 10:13:20 - The value is (1)
    2014-06-23 10:13:20 - CacheService is Installed.
    2014-06-23 10:13:20 - Reading the following DWORD value/name...
    2014-06-23 10:13:20 - DCA
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
    2014-06-23 10:13:20 - The value is (1)
    2014-06-23 10:13:20 - CacheAdmin is Installed.
    2014-06-23 10:13:20 - The prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 -
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 2.0.1230.0
    2014-06-23 10:13:20 - The prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 -
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 1.0.959.0
    2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
    2014-06-23 10:13:20 - Reading the following string value/name...
    2014-06-23 10:13:20 - Version
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
    2014-06-23 10:13:20 - The value is...
    2014-06-23 10:13:20 - 5.0.51212.0
    2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
    2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
    2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
    2014-06-23 10:13:20 - Reading the following DWORD value/name...
    2014-06-23 10:13:20 - IsInstalled
    2014-06-23 10:13:20 - from the following registry location...
    2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
    2014-06-23 10:13:20 - The value is (1)
    2014-06-23 10:13:20 - The prerequisite above is already installed
    2014-06-23 10:16:23 - Opening log file
    2014-06-23 10:16:23 - Opened action for user
    2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.log

    It looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I am unable to install Virtual Machines on my Mid-2013 MacBook Air

    Dear Apple Support Community,
    I have recently moved away from a Mid-2010 MacBook Pro to a new Mid-2013 MacBook Air. As much as it pains me, I have a need to install a virtual machine running Windows 7 in order to utilize an application called vSphere. The vSphere web interface is too unreliable to use via any web browser, so running a Windows VM is the only way forward.
    However, when using VMWare Fusion 5 (I know 6 is available, but I do not have a license for it) or VirtualBox (very latest version) I receive an error which states that my CPU is not 64-bit compatible. I was under the impression that since Snow Leopard (10.6) was release that Mac OS was fully 64-bit. My MacBook Air is currently running Mavericks (10.9.1). It has a 1.3GHz Intel Core i5 CPU.
    I read that Apple restricts access to the EFI firmware settings, as I originally thought it was a case of enabling Virtualization capabilities on the processor. To further add to the dilemma my Mid-2010 MacBook Pro has no issues running VMWare Fusion or VirtualBox, so I am at a loss as to why I am unable use these virtualization platforms on my new Mac.
    Any help would be greatly appreciated.

    I remember reading somewhere that the new macbook air's from 2013 have a 64 bit core i5 4250u processors.
    Also intel mentions it here:
    http://ark.intel.com/products/75028/

  • Unable to install Flash on older Mac-running 10.5.8

    Help! Is anyone else unable to install an older version of Flash on their less-then brand new computer(PowerMacG4)?? I'm running 10.5.8. I've downloaded the Uninstaller(which has a pink x in the upper-right corner) but two versions of Flash remain on my computer. When I try to install the version of Flash which adobe has recommended I get this message:
             Adobe®Flash®Player cannot be installed.
             Devices with PowerPC processsors are no longer
             supported. Click below to download the last version
             Flash Player for PowerPC.
             Get Flash Player for PowerPC
    I then click the"Get Flash…” which takes me to the same page which asks for the operating system I have and the version I need, I type in what they offer and go through the same thing.

    Pulled this paragragh from an article talking about Apple pulling Flash from iOS in favor of HTML5..."Mac users take note: Flash requires OS X 10.6 or later running on an Intel platform since Adobe removed support for PowerPC Macs in Flash 10"
    Not really sure what that all means, I believe I am not intel but PC. I will look into HTML5

  • Unable to install JDT example plugins in NetWeaver Studio

    Hello,
    I am using the SAP Web AS (Java 6.40) Sneak Preview Edition and am having a problem installing the JDT example plugins in the NetWeaver Developer Studio WorkBench.
    I have followed the instructions given in the 'Java Development User Guide' of the WorkBench online help (Getting Started >>Basic Tutorial>>Preparing the Workbench >>Installing the JDT Example Plugins) :
    1. I have downloaded the Examples zip file (eclipse-examples-2.1.2-win32.zip ) from www.eclipse.org/downloads
    2. The zip file has been extracted to the root Eclipse directory,  C:\Program Files\SAP\JDT\eclipse\ while ensuring that the WorkBench is not running.
    3. However, after restarting the Workbench, there is no message indicating that the updates have been detected. Moreover, when I navigate to File > New > Example.. in the WorkBench, I don't see any examples which have been installed.
    Please advise on the correct procedure for installing the JDT example plugins in the WorkBench.
    Thanks,
    Nikhil
    Maxtor Peripherals (S) Pte Ltd.
    Singapore

    Hello Jiri,
    Thanks for the reply. I have followed your instructions but am still unable to install the Eclipse plugins and examples. While importing, if I point to the Eclipse base folder where I have unzipped the downloaded file, none of the examples/plugins are recognized.
    I would like to emphasize that the examples to which I was referring in my earlier note are not the standard examples which are delivered alongwith the SAP Web AS Sneak Preview installation. I am trying to install the examples which have been downloaded from the Eclipse website. These have been described in the WorkBench online help in the following section :
    Platform plugin Developer Guide > Examples Guide > Installing examples manually..
    The examples are Address Book, Clipboard, File Viewer etc.
    I understand that the prerequisite for this is  the installtion of the Eclipse plugins. As described in my earlier email, I have followed the instructions but the Workbench is not being updated with the Eclipse plugins.
    Awaiting your reply..
    Thanks,
    Nikhil

  • Unable to install Sun Java System MAPI Service Providers

    I tried to install the outlook connector for Outlook 2003. I've got the following error message. It said that Unable to install Sun Java System MAPI Service Providers. I am using Windows 2000 SP3 platform
    --- 2005/06/22 11:41 ---
    11:41:26 [5365] Outlook version is 11.0.6359.0.
    11:41:26 ERROR: [5501] Unable to find MAPI directory.
    11:41:26 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
    11:41:26 [5475] TMP directory is 'C:\DOCUME~1\admin\LOCALS~1\Temp'.
    11:41:28 [5362] Checking Windows version.
    11:41:28 [5363] Windows version is 5.0.
    11:41:28 [5364] Checking Outlook version.
    11:41:28 [5509] Checking default mail client.
    11:41:28 [5508] Default mail client is 'Microsoft Outlook'.
    11:41:28 [5178] Verifying that Outlook is not running.
    11:41:28 [5179] Trying to login to shared session.
    11:41:29 ERROR: [5501] Unable to find MAPI directory.
    11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
    11:41:29 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
    11:41:29 ERROR: [5501] Unable to find MAPI directory.
    11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
    11:41:31 ERROR: [5351] Unable to install Sun Java System MAPI Service Providers.
    11:41:31 ERROR: Unable to install Sun Java System MAPI Service Providers.
    Anyone can help for this? Thanks

    I have used this method, but the dog gone service does not return a started status. It just keeps saying starting even after the service starts.
    Download sc.exe from ftp://ftp.microsoft.com/reskit/win2000/sc.zip and copy
    it to system32
    Open a command line, change to C:\Sun\AppServer\lib and run:
    C:\winnt\system32\sc.exe create SJdomain1 binPath=
    "C:\Sun\AppServer\lib\appservService.exe
    \"C:\Sun\AppServer\bin\asadmin-pause.bat start-domain domain1\"
    \"C:\Sun\AppServer\bin\asadmin-pause.bat stop-domain domain1\"" start= auto
    DisplayName= "SunJava domain1"
    1. I'm no fan of windows and I prefer Solaris or Linux
    2. Windows should have this tool as a part of the OS so I don't have to go hunt for it
    3. I guess this solution is better than no solution at all :)

  • Unable to install weblogic 6.0

    hi,
    I am unable to install weblogic6.0 on sunos 5.6, sparc platform, below
    is the message. could somebody throw some light on how to proceed.
    Arun.
    # sh weblogic600_sol.bin
    Preparing to install...
    Error: failed
    /tmp/install.dir.24974/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
    because ld.so.1:
    /tmp/install.dir.24974/Solaris/resource/jre/jre/bin/../bin/sparc/native_threads/java:
    fatal: libCrun.so.1: open failed: No such file or directory

    Hi i successfullyinstalled weblogic 6.0, the reasons solaris patches required to run java
    1.3. Try to install jdk1.3 first to make sure weblogic installation goes fine.
    Arun wrote:
    hi,
    I am unable to install weblogic6.0 on sunos 5.6, sparc platform, below
    is the message. could somebody throw some light on how to proceed.
    Arun.
    # sh weblogic600_sol.bin
    Preparing to install...
    Error: failed
    /tmp/install.dir.24974/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
    because ld.so.1:
    /tmp/install.dir.24974/Solaris/resource/jre/jre/bin/../bin/sparc/native_threads/java:
    fatal: libCrun.so.1: open failed: No such file or directory

  • Unable to install the adobe protected content module

    I'm getting an unable to install the adobe protected content module error while trying to watch video on a website I've used millions of times (http://video.citytv.com/video/ ).    I've checked on your link to find that I'm running  version 10.3.183.29 on mac os x 10.5.8 which is the most current flash I can have with my operating system.  I've changed from Chrome, to firefox to safari to watch this site with no luck on any browsers.  I'm getting pretty frustrated.  Please Help.

    Hi Justine,
    We're looking into citytv.com and the brightcove setup there.  
    In the meantime, could you see if "known good" content plays using the Mac OSX setup and player you have?
    1.  Open the Adobe test player http://drmtest2.adobe.com:8080/TVP/TestVideoPlayer_FP.html
    2.  In the URL field, enter http://drmtest2.adobe.com:8080/Content/anonymous.f4v     (case-sensitive)
    3.  Press the [Update Adobe CP] button.  It should log "AdobeCP update Complete. Updating time: xxxx milliseconds" at the right.
    4.  Press the [Play] button and see if you see the Getty Train video playing.
    For our internal testing, we were using the 30Rock episode 6, season 7:
    http://video.citytv.com/video/detail/1971593280001.000000/aunt-phatso-vs-jack-donaghy/
    What error are you getting during attempted playback?   
    We assume you're from Canada since CityTV is from Canada.
    What we see is:  if we try to play this content from the U.S, it fails to play on any platform (Windows 7, Windows XP, Mac OSX 10.8, 10.5.7 with various browsers & players) but we see no error - just blank video area.
    When we use a system in our Canada office, playback works and it also works when we use VPN.   Is it possible there is some issue with checking geo-location?   (are you perhaps inadvertently logged into a VPN to the US during your playback tests?   or traveling?)
    Thanks.
    Stephen

  • SAP B1 2007 A unable to install

    HI
    I tried installing SAP B1 2007 A PL-00 (Base version )on Windows 2008 R2 platform , But after installing Server tools cannot able to install Server, cannot find the connectivity with SQL .
    Although , its is compatability issue ,I faced the same issue , which is resolved by installing higher base patch level PL 10 .
    Can anyone give me the link to download SAP Business One 2007 A higher version of patch level , might be i am bale to resolve the issue using this.
    Also i am not able to find the same on sbo-swcenter, i need PL 30 upgrade.
    Thanks in advance
    RP

    I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
    Environment is set as following :
    1. SQL SERVER 2008 Installed on Server A
    2. SAP B1 to be installed on Server B
    3 Both servers are in domain
    4.Firewall is off
    5. ODBC Connection is tested Successfully
    6 Port is also seem to be ok.
    But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
    I also checked the connecting SQL server from the instance .
    Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
    Although i have also download the PL30 tried with the package . cannot able to connect.

  • Unable to install Eclipse Plugin for Azure

    I am unable to install the Eclipse Plugin for Azure.  I have Eclipse Indigo and have installed the Azure SDK 2.3.  When I try to add the site http://dl.msopentech.com/eclipse in the Install New Software window I get an authentication pop-up.
     When I try my Microsoft ID it fails authentication.  The instructions do not mention any authentication.  What should I put in here?

    Hi,
    This plugin requires Azure SDK 2.3. This can be downloaded using the Web Platform Installer (WebPI) at
    http://go.microsoft.com/fwlink/?LinkID=252838. However, if you don’t have it installed, when you create your first Azure deployment project, the plugin will automatically install
    Azure SDK 2.3.
    Also, you could download the sdk from GitHub (https://github.com/MSOpenTech/WindowsAzureToolkitForEclipseWithJava ) and manually install . And you could refer to this blog
    (http://java.interoperabilitybridges.com/cloud ).
    Please try it.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to install swdp to glassfish v2 build 58

    Hi all
    I am unable to Install swdp to glassfish-v2-b58g. I am using Netbeans IDE 6.0 Beta 1. When i try to install swdp this is the message i get in the message box:
    "glassfish-v2-b58g is not version 9.0 of the Sun Java System Application Server Platform Edition"
    Any help will be deeply appreciated
    Thanks and regards,
    Deepti

    Hi,
    I suggest you check drivers updates for build 9879, make sure to have latest driver version for all your device, and make sure to have latest important Windows Updates in 9879, clear %windir%\SoftwareDistribution folder. After that, upgrade to 9926,
    check if issue persists.
    Yolanda Zhu
    TechNet Community Support

  • Unable to install plugin Image Viewer

    I have Adobe Reader 9.1, Adobe Acrobat (no idea which version), Adobe Photo Delux, Adobe Photoshope Elements 4.0,  Adobe Shockwave Player 11.5 and Adobe Flash Player 10 with ActiveX Plugin.
    I have downloaded the Image Viewer plugin but am unable to install it.  I get an error message that says I need Adobe Reader 5 or later...I think I'm amply covered.  Any ideas what the problem might be and how to fix it?
    My OS is Windows XP.
    My anti-virus is Comodo and it isn't making any alerts about the software.
    Any help/advice would be greatly appreciated.

    Hi,
    This plugin requires Azure SDK 2.3. This can be downloaded using the Web Platform Installer (WebPI) at
    http://go.microsoft.com/fwlink/?LinkID=252838. However, if you don’t have it installed, when you create your first Azure deployment project, the plugin will automatically install
    Azure SDK 2.3.
    Also, you could download the sdk from GitHub (https://github.com/MSOpenTech/WindowsAzureToolkitForEclipseWithJava ) and manually install . And you could refer to this blog
    (http://java.interoperabilitybridges.com/cloud ).
    Please try it.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • How to share iTunes with two users on the same mac.

    My wife & I use the same iMac with different user accounts.  How do we share one iTunes account on that computer.  I tried moving the iTunes folder in music on my user account to shared user, but it seems like new iTunes folders are created in the or

  • How do I create a dropdown in the Subject Line field while sending emails.

    How do I create a dropdown in the Subject Line field while sending emails as I send more than 300 emails with the same subject line everyday.

  • Why is the Other file so large on my iPhone - nearly 5 GB.

    I have a 32 GB iphone 5s. I'm running out of space.  In syncing with my computer, it shows the different file groups (audio, video, photos, etc.), and the "Other" file is nearly 5 GB.  Why is it that big, and what is it all?  Also is there a way to r

  • Hdmi sound issue

    I had to buy an Gefen HDMI Detective plus for my previous 2010 MacMini server with Snow Leopard in order to avoid the reseting of the audio output to the internal speakers every time I changed the video output from TV to projector or shutting down th

  • OB58 - financial statement tables

    Can anybody help me, which table that 'financial statement version' bring the data to do the report in 46c version. There is FS  header in T011, but where is the table with FS items (accounts) ? regards Piotr Edited by: Piotr Pukaluk on Apr 15, 2010