Unable to install or start phone software update components -Arc S

I cannot update my xperia arc S. It always ended up showing this "
Unable to install or start phone software update components". Can anyone, help me?
Solved!
Go to Solution.

SUS ( Sony Update Service)  ... download and install it on pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
                  or
http://www.sonymobile.com/global-en/tools/update-service/
Both the links are same
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Similar Messages

  • Unable to install or start phone software update components

    Hi,
    Had this problem just now after searching forum did not find a fix but worked it out myself, heres how:
    Goto > C:\ProgramFiles\SonyEricsson
    Then just delete the update engine folder, restart update , and bosh it works!
    thought this might be helpful to those with same issue, maybe even make it a sticky :smileywink:

    I suggest you try the following,
    1. Close PC Companion
    2. Install java from http://www.java.com/winoffline_installer
    3. Start PC Companion again and try to do the SW Update of the phone.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  Error message: Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

    I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  It instructed me to hold power button to shut off and then press again to restart.  Same error message keeps coming up and computer won't boot to home screen.
    Error message:
    Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
    \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
    Debugger called panic
    Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
    THANKS FOR ANY HELP.
    ROBB

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
    When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    Don't install the Thunderbolt update -- it's defective.

  • HT201263 i forget my passcode.now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    my itune keep showing message that i tune is downloading software for my phone. but downloading for several minutes it displays message that i tune cannot connect to my phone because it is locked with a passcode. first entre the pass code.
    on the other hand phone is started with a message on screen phone is disabled.

  • AFTER INSTALLING A RECENT JAVA SOFTWARE UPDATE (TROJAN HORSE) UNABLE TO SCCESS SEVERAL BOOK MARKED PAGES. ANY SUGGESTIONS

    After installing a recent java software update(trojan horse) have not been able to open several bookmarked pages.

    Was this the Security Update that disabled Java in the Browsers?
    If so & you need Java, just reverse these unchecks to checks...
    http://support.apple.com/kb/HT5241?viewlocale=en_US
    http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
    http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets

  • HT5457 how do I install the IOS 6 software update to my Ipad 3G?

    How do I install The IOS 6 Software update on my IPad 3G? Itunes is saying it is up to date but it is not. It says it 5.1.1.

    Double tap the home button and bring up the multi-task bar. Hold down on one the apps until they all start to wiggle and display a minus sign. Tap the minus sign and close all of the apps. Tap the home button and close the multi-task bar. Reset the phone, hold the sleep/wake and home button together until you see the Apple logo and then release. After the phone restarts, see if you see the same behavior. If you do, the next step to restore from a backup. If that doesn't help, then restore as a new device. Use this support document to understand the restore process. http://support.apple.com/kb/HT1414
    If you have to go all the way through restore as a new device and it does not work, then it could be a hardware issue. I've not seen any other posts about screen issues after updates, so one of these should fix it unless there is a problem with the screen.

  • I installed the Epson Printer Software Update 2.15 and now I get a rastertoespll crash whenever I try to print

    I installed the Epson Printer Software Update that appeared in 'Software Update"' this morning and since then I get an error :
    Process:    
    rastertoescpII [47217]
    Path:       
    /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII
    Identifier: 
    rastertoescpII
    Version:    
    Code Type:  
    X86-64 (Native)
    Parent Process:  cupsd [15]
    Date/Time:  
    2013-08-09 11:30:46.469 -0400
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    whenever I try to print anything. I tried repairing permissions and downloaded the update manually from Apple and ran with the same results. I am running OS X 10.6.8 on a 2.53 GHz Intel Core 2 Duo Mac mini and printing to an Epson WorkForce 630

    Disconnect all devices from the computer then do the following:
    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    Reinstall the driver directly from Epson's website.  If you are still having problems after the reinstall, you should contact Epson tech support for a solution and/or work-a-round. 

  • Unable to install new iOS 6 software error 3004

    I am unable to install new iOS 6 software on my ipod 4 touch getting unknown error 3004

    mardanlou_ali wrote:
    unable to install update iOS 6.1.3
    Check that yours is not an iPad 1
    Identify iPad Models...
    http://support.apple.com/kb/HT5452
    If it is ... iOS 5.1.1 is as far as it will go.

  • E71 white screen appers after phone software updat...

    please help me i have updated my phone sotware through nokia phone software updator software after updating when i install my backup in to my phone the phone was showing white screen not working my nokia e71 please help me

    Hi niteshdamore
    Have a look at this post:/t5/Pool-of-Knowledge/Recovering-from-a-failed-fir​mware-update/m-p/398147/highlight/true#M112
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Error in Phone Software Update page ???

    When looking for a software-update for 6131
    -> Update over-the-air
    Step 2/6 says Back-up data ... to memory card ...
    I might be blind, but I didn't see a backup option on my 6131.
    Did anyone see?
    Perhaps it's an option for S60 phones!?
    Greetings
    Carzan
    Nokia 6131 V5.50

    Hi,
    I checked the software update link on Nokia-UK site and found the follows info in update over PC:
    Personal data such as contacts, photos and messages stored in the phone memory may be deleted during phone software update. Before updating your phone software, we recommend you back up this data to your PC using Nokia PC Suite Software. Once your phone software is updated, you can restore the data using PC Suite.
    This is correct text. And update over-the-air text is not correct. Just push next if you saved all data from your phone.
    AndreyMessage Edited by andrey_gres on 20-Apr-200704:01 PM
    Message Edited by andrey_gres on 20-Apr-200704:02 PM
    6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
    N95, E61i, E71, E72,8600, 5800, N8

  • Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

    Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
    iTunes no longer recognizes my airport express.
    Error Message:
    None of the selected updates could be installed.
    An unexpected error occurred.
    Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
    Any sugestions?

    I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

  • I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    Hi
    Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
    And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
    I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

  • Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

    Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
    I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
    KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
    At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
    I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
    I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537  HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
    If you need more details, please tell me & Thanks in advance

    Checkout this Microsoft article: http://support.microsoft.com/kb/976982 
    It has some resolution steps that may help.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Just installed the latest iTunes software update and the extra images i had for my albums on iTunes have disappeared...Help?

    Just installed the latest iTunes software update (iOS 5.0.1) on my MacBook Pro, and the extra images i had placed on my album covers in the selected item box have disappeared, leaving just one image per track. Any ideas on how to restore would be most appreciated...

    Installing an iTunes update does not remove your media or personal files.
    Are the files actually missing off the computer, if so, you have a serious computer issue... not a software update issue.
    Regardless, use the backup of your media and other important files to put everything back.  You do have a backup, correct?

  • I am unable to install the groupware synchronization software in CRM UI

    Hi Expert,
    I am unable to install the groupware synchronization software in CRM UI.Please find the attached image in this install button is disable.my system have Microsoft outlook 2013 and Microsoft visual studio tools.
    please check once and let me know what is problem.
    Thanks in advance.
    Thanks
    Jana J

    Hi Gervase,
    I have downloaded latest one already.
    For this  i am following below step to install
    Go to transaction SE80 and choose 'BSP Application'.
    Search for 'CRMCMP_GW_WC'.
    Go to the folder MIMEs and right click on the 'setup.exe' (or setup.msi, if you are using the old series).
    Choose the option 'Upload/Download' and then 'Upload and Replace'.
    In the pop-up choose the path to latest setup.exe file.
    But its running long time.
    please give me solution for this.
    Thanks
    J Jana

Maybe you are looking for

  • Do I need a separate certificate for VPN on Lion Server?  I cannot get it to work.

    I am a bit of a neophyte with OSX server. I am setting up my first server and am having difficulties getting the services to work. iCal, Mail, VPN don't seem to work. the ports are open on the Airport Express.  I opened then using the utility program

  • BAPI for service order create/change

    Hi, I need to create and update service order on release 4.6C. I have searched for available BAPI but did not come up with anything. Searching the OSS and forums, I found that there are function modules BAPI_ALM_ORDER_CREATE and BAPI_ALM_ORDER_MAINTA

  • Error 4 S N S/1 / C 00 00 00 8 : TLDp- - 1 2 4

    I did a AHT and an Error 4 S N S/1 / C 00 00 00 8 : TLDp- - 1 2 4 The Apple chat said he did not know ,then said it is a software issus ! then to Reset SMU and then VRAM but it still comes and the Fan is on full power.

  • Update to itunes 9.0.2

    I am currently running itunes 9.0.1.8 & sometimes when I start it up, a window pops up asking me if I want to update to 9.0.2, & I click yes, then the windows just disappears after a few moments & nothing seems to happen. I am not sure if it is updat

  • 2Wire Router Issues - How to Turn off Security

    There appears to be an ongoing issue with MacBook wireless and the 2Wire routers (via AT&T/SBC). My wireless was working fine until I downloaded the recent Apple updates. I saw one fix for this posted here: http://discussions.apple.com/thread.jspa?th