Unable to install Orable Enterprise Linux with LSI MegaRAID 8300XLP

I could not install Oracle Enterprise Linux on the PC with LSI MegaRAID 8300XLP
On the boot prompt, i typed "linux dd" with USB floppy driver, but it did not detect the driver.

I got the megaraid driver from fujitsu siemens and followed instruction from “Linux Driver for Primergy Servers” to create Linux driver image.
Note: mega_sas.ett, mega_sas.sh and mega_sas.biz
I formatted the floppy disk, then I run the script, mega_sas in Linux. The script will generate some files which need for LSI MegaRAID 8300XLP.
The three files (mega_sas.ett, mega_sas.sh and mega_sas.biz) have to be on the same directory.
RedHat 4 U4 x86 64 bits
On the boot prompt, I typed a command “linux dd ” with the LSI MegaRAID 8300 XLP driver image , and it detected the driver. I could load OS on TX150-S5.
Oracle Enterprise Linux x86 64 bit R4-U4
On the boot prompt, I typed a command “linux dd” with the same driver image which I used it on RedHat 4 U4 x86 64 bit, and it could not detect the driver.
During the installation, on the page which gives me two options for partitioning the disk,
“Automatically partition
Manually partition with Disk Druid
After I chose one of them, I clicked “Next” and I got an error message such as
“ No Drivers Found
An error has occurred – no valid devices were found on which to create new file
systems. Please check your hardware for the cause of this problem.
.

Similar Messages

Install Oracle Enterprise Linux

We have an old workstation (Dell Precision WorkStation 530 with 2.40 GHz Intel Xeon processor, 2 GB RAM, and 3 36-GB hard dirves) and I would like to use it as a test box for Oracle on Linux. I tried to install Oracle Enterprise Linux, but it stuck at the some point every time, either during installing libraries/modules or formatting disk. The place the installation stuck varies. It does give any error message, but the installation just stops there fore hours or days. I tried Oracle Enterprise Linux 4 DVD, Oracle Enterprise Linux 5 DVD, and latest image CDs downloaded form metalink. All have the same issue. That installation starts as normal, then slow down, then freeze. I tried installing Fedora Core on the box using CDs from a Linux book yesterday, but it was successful and worked fine. I am wondering where there are some hardware incompatibility or other issues associated with the box. Any suggestions are greatly appreciated. Thanks.
George

Hi, George.
I think you'll have to determine the motherboard and other periferals in your machine to find out which one is incompatible with OEL. The most probable culprit is the motherboard. Find out which model it is and Google, using the model and the term "Enterprise Linux" (or RHEL or Centos, they are all the same).
There may be workarounds, if it's indeed an incompatibility issue: settings in the CMOS Setup or advanced parameters for booting the installation -- usually related to the drives (HD, DVD, SATA mode etc) or to P'n'P periferals (USB, for instance).
Regards,
Marcio

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

How to install Oracle Enterprised Linux on VMware PLayer 4

Hi Everyone,
My name is John and I've a small issue which I would like to share with you and hopefully, you are able to assist.
My laptop is installed with a Window 7 Home Edition operating system and I've installed VMware-player-4.0.2. After reboot, I've also downloaded the file - V29609-01 which is the ISO file of Oracle Enterprise Linux 6.2.
After that, I've tried to create a Virtual Machine - Oracle Enterprise Linux using the VMware Player by specifying the path and file name of the V29609-01.iso file on my local c:\ drive. I've tried it several times, but every time it just returns the message - 'pxe-e53 no boot filename received' and it just hangs there without proceeding further. Please let me know what I've done wrong and the correct steps and procedures to solve this problem as this is my first time installing a Linux operating system. Thank you for your assistance.
Regards,
John

Hi,
Can you clarify and explain what is your exact meaning of 'Are you sure you've added the ISO to the VM to boot from?'? Because the following is what I did:
1.) Click the Create A New Virtual Machine.
2.) Select the 'Install disc image file (iso):' option and enter the full path of the V29609-01.iso (Oracle Enterprise Linux 6.2) file that I've downloaded from https://edelivery.oracle.com/. But underneath it, that is a message saying - 'Could not detect which operating systems is in this dsic image. You will need to specify which operating system will be installed.'
3.) Click 'Next'.
4.) I chose "Linux' under the Guest operating system and chose 'Oracle Enterprise Linux' under the Version drop down.
5.) Click 'Next'.
6.) I left the Virtual machine name as 'Oracle Enterprise Linux' and click 'Next'.
7.) I set the Maximum disk size to 300 GB and have the 'Split virtual disk into multiple files' option selected and click 'Next'.
8.) I have the 'Power on this virtual machine after creation' checked and click 'Finish'.
9.) A black screen displayed inside the VMware Player saying:
'CLIENT MAC ADDR: 00 0C 289 ......
PXE-E53: No Boot filename received
PXE-M0F: Exiting Intel PXE ROM.
Operating System not found
10.) And the process just hangs there.
Regards,
John

Unable to install MBAM 2.5 with SCCM integration on named SQL instance

Hi,
in production i am installing MBAM 2.5 with SCCM integration but during the installation it asks for the SCCM reporting services point and which it is unable to recognize.
whereas in my lab environment i have default SQL instance which has reporting installed, in that case it works fine.
can someone let me know why the issue is coming?
in the event log the issue is : Description = "user domain\username is not able to get the lock at this time.Error:0x40480732"

For the integration part, You need to install the MBAM SCCM Integration feature on SCCM server. For compliance reporting in integration, MBAM uses the Reporting service point for SCCM.
When installing the SCCM integration feature, you need to provide the name of the reporting Server where Reporting Service point role is installed for SCCM. But it does not provides any option for the instance but for the Server only. We have two instances
for SQL. One for CAS and other for Primary site. We need to run the installer on CAS and hence need to connect to the SQL instance for CAS.
We have also tried with the powershell commands but it is not working either.
Is there any way to install MBAM integration feature on a SQL instance. As far as I know, it automatically picks the instance but not happening for me.
Gaurav Ranjan

Unable to Install Universal Wireless Keyboard with the CD that came with the Palm Tungsten E2 on my Windows Vista OS. Can some help? Would Appreciate it very much.

I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong?
Post relates to: Tungsten E2

For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
Oh as a side note the check if this is your solution is only if the answer solves your original question.
Message back if you have more question or need more help
Post relates to: Palm Z22

Unable to import Oracle Enterprise Linux iso

Hi ,
Does anybody was able to import Oracle Enterprise Linux iso image on Oracle Enterprise manager ops center , OC 11 g R1
I'm getting the following error
ISOImage Task : Result : Only Solaris , Red Gat or SUSE OS images are supported for OS provisionning
Spreadsheet available here http://wikis.sun.com/display/EMOC11g1/Supported+Systems , show that Oracle Enterprise Linux is certified with OC 11g R1
If you have any workaround , you're welcome
Cheers

Discard ... working with OEL 5.5

Problems instaling a enterprise 4800 with 2 domains

Hi,all. We are installing a enterprise 4800, and we have a problem. We want a single mode configuration, when we try to put the setkeyswitch on, the system gives us an error
{N0/SB0/P0} Passed
{N0/SB0/P1} Passed
{N0/SB0/P2} Passed
{N0/SB0/P3} Passed
May 21 09:38:11 sc Platform.SC: ErrorMonitor: Domain A has a SYSTEM ERROR
May 21 09:38:11 sc Domain-A.SC: ErrorMonitor: Domain A has a SYSTEM ERROR
May 21 09:38:11 sc Domain-A.SC: RP0 encountered the first error
May 21 09:38:11 sc Domain-A.SC: RepeaterSbbcAsic reported first error on /N0/SB2
May 21 09:38:12 sc Domain-A.SC:
/partition0/domain0/SB2/bbcGroup1/sbbc1:
ErrorStatus[0x80] : 0x80008200     FE [15:15] : 0x1
     ErrSum [31:31] : 0x1
     SafErr [09:08] : 0x2 Fireplane device asserted an error
May 21 09:38:13 sc Domain-A.SC:
/partition0/domain0/SB2/bbcGroup1/cpuCD/cpusafariagent1:
AFAR (high)[0x531] : 0x00000400
     AFAR [42:32] [10:00] : 0x400
AFAR (low)[0x541] : 0x04c00010
AFSR (high)[0x551] : 0x00080000
     PERR [19:19] : 0x1
EMU A[0x501] : 0x00000200
     UTT [09:09] : 0x1
May 21 09:38:13 sc Domain-A.SC: SdcAsic reported first error on /N0/IB6
May 21 09:38:13 sc Domain-A.SC:
/partition0/domain0/IB6/sdc0:
SafariPortError[0x200] : 0x01028100     AccParSglErr [17:17] : 0x1
     FE [15:15] : 0x1
     AccArbErrTT [24:24] : 0x1
     ArbErrTT [08:08] : 0x1 Arbitration error for DTransID
May 21 09:38:13 sc Domain-A.SC:
/partition0/RP0/sdc0:
SafariPortError6[0x260] : 0x00408040     FE [15:15] : 0x1
     IDErrTT [06:06] : 0x1 The SDC received a packet with an inappro
priate ID for TTransID
     AccIDErrTT [22:22] : 0x1
May 21 09:38:15 sc Platform.SC: Domain A is currently paused due to an error. T
his domain must be turned off via "setkeyswitch off" to recover
May 21 09:38:15 sc Domain-A.SC: Domain A is currently paused due to an error. T
his domain must be turned off via "setkeyswitch off" to recover
Testing IO Boards ...
May 21 09:38:15 sc Domain-A.SC: Domain is paused, Skipping domain tests.
setkeyswitch operation did not complete
keyswitch is: standby
sc:A>
and the keyswitch stays standby. Any idea?????

Brian Orwig wrote:
Here is the problem.
I login to one domain and then open a new webpage (same browser) and login
to a 2nd domain. I can then navigate in both domains in each web page.
However, when I logout of one, it logs me out of both and which ever one
that I logged out of is the logout/login page that I see for both web pages.
The same thing happens if I try to login to 2 different domains at the same
time. One will override the other and I end up with the same domain open in
both browsers.
I am pretty sure that this has to do with the cookie, since it is probably
using the same one for both and then getting confused. Does anyone know how
to fix this?The way the cookies are set for the current authentication are it is based on
the portal domain/dns domains and the client ipaddress.
When a user logs in a random session id is generated, and then once he
authenticates the session id is made valid and is added into the session hash
table.
So to answer your question you can do what your trying to do if you are using
two browsers but in the current architecture and the way sessions are handled it
is not possible if your using just one browser ..
iWS Sp8 is not certified to run with portal and the web server that is shipped
with should not be updated seperately, in the past doing that has broken portal
>
>
Portal Server: IPS 3.0 SP2
Web Server: IWS 4.1 SP8

Guide For Installing Oracle Enterprise Linux in Virtual Box

Hello,
Any good tutorial available for installation of Oracle Enterprise Linux in Virtual Box?
Regards

Installing Oracle on Virtual box is similar to the one you install on regular Linux box.
just make sure u have enough memory assigned for VMbox..
create user, group, directories and change permissions
change profile
change all the kernal options listed in install guide and ur good

I have Logic Pro 8 and unable to install on MacBook Pro with Lion. Installation CD ejects

Unable to install Logic Pro 8 CDs with MacBook Pro with Mac OS x 10.7 (Lion).

You Need Logic Pro 9 for Lion...
See Here:
Logic for Lion
http://support.apple.com/kb/HT4807

HELP Unable to Install Red Hat Linux!

Hi there !
I'm getting the following message trying to install red hat linux 8.0: " There was an error installing glibc commom 2.2.93-5. This can indicate media failure, lack of disk space and hardware problems. This is a fatal error and installation will be aborted . Please verify media and try you install again"
I already tried media test and several inst. options and still get the same error. Suspect of hardware incompatibilities!
Help will be greatly appreciated ...!

There was a media problem. The disk on which installation was taking place has bad blocks.
Disk was replaced and installation was succesful !.
Thanks anyway ....!

A VERY Easy Tutorial on doing a clean install of Arch Linux with Gnome

is there anyone who could help me test Arch Linux with Gnome DE?

The pacman bit is new, and has already been solved: [SOLVED] pacman update fails: gcc requires gcc-libs=4.7.0-3
Just press "N" and you'll see that pacman will be on the list.
Welcome to the forums.
Edit:
Shahe1993 wrote:is there anyone who cou...
Oh. Feeling a bit busy there, huh? Nevermind.
Last edited by DSpider (2012-04-12 17:28:18)

Unable to install JRun on Linux receive error while loading shared libraries

I'm installing JRun trial version on Ubuntu with java version
"1.6.0_07". I receive the following errors when I install:
guest:~/Desktop$ sh ./jrun-40-linux-en.bin -i gui
Preparing to install...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
Launching installer...
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directory

I get that error too when try to install Jrun 4.0 on Open
Suse 11.0, Can anyone show me how to solve that problem.

Unable to install the Demonstration Environment with ODI 11g

Hi,
Can someone please help me with Demonstration environment installation with ODI 11g on a windows system.
I have downloaded the zipped file from the OTN site.
I am unable to understand the installation steps in the user guide.Posting them for your reference.
"To manually install the Demonstration environment, do the following:
Unzip oracledi-demo.zip in the ODI_HOME folder.
Verify that the JAVA_HOME environment variable is set and contains the path of a JVM suitable for Oracle Data Integrator.
If this variable is not set correctly, set it to a valid java machine location.
For example:
On UNIX operating systems:
setenv JAVA_HOME/usr/local/java
On Windows operating systems:
Set the JAVA_HOME variable graphically "
Regards,
Lovey Saxena

Hi;
Did you try to start installation? Your Java_Home could be avaliable on your env settings, so you dont need to set this for installation. If its fails please try to use this syntax:
Set JAVA_HOME=C:\xxx
Regard
Helios

Problem when Installing from Existing Linux with Arch's Image

Hey!
I'm just getting started with Arch Linux. I made a 20GB unallocated space between my Win7 and Ubuntu partitions, created a new ext4 partition and I'm currently following this guide ("another method" section) in order to install my first attempt of Arch Linux.
I'm on a 64-bit Ubuntu and want to install a 64-bit Arch Linux too, so I'm using the image archlinux-2011.08.19-core-x86_64.iso and in the process of following the instructions in the mentioned guide, I replaced i686 by x86_64.
The problem comes up when I try to do the chrooting, where I get:
chroot: failed to run command `/bin/bash': No such file or directory
Any idea what could I be doing wrong?
Thanks!

Ok, I had just messed up when mounting the different directories. Sorry for the noise...
Anyway, found more errors when running:
aif -p interactive
about not finding /lib/modules/3.0.0-13-generic/modules.dep... what makes me think that this guide is intended to be followed when running also an Arch as the Existing Linux.
I think I'll just go with the flash drive option...
Cheers!

Unable to install Orable Enterprise Linux with LSI MegaRAID 8300XLP

Similar Messages

Maybe you are looking for