Unable to install Oracle VM Manager 3.0.2 on OEL 5.9 64 bit

Hi,
I am attempting to install Oracle VN Manager 3.0.2 on OEL 5.9 64 bit.
I follow the instructions published in Installation and Upgrade Guide Release 3.0 for x86 (E18548-02).
I use the "Standard Install", using a database on another server.
This is an Oracle 11gR2 SE database.
My installation stops at:
/runInstaller.sh
Step 5 of 9 : ADF ...
Retrieving Oracle Application Development Framework (ADF) ...
Unzipping Oracle ADF ...
Installing Oracle ADF ...
Step 6 of 9 : Oracle VM  ...
Retrieving Oracle VM Manager Application ...
Extracting Oracle VM Manager Application ...
Installing Oracle VM Manager Core ...
Step 7 of 9 : Domain creation ...
Creating Oracle WebLogic Server domain ...
[root@localhost cdrom]#
But according to the documentation, I shuld end up with:
Enabling Oracle VM Manager service ...
Installation Summary
Database configuration:
I don't see such a summary.
Event If I try
http://<IP address of the VM Manager server>:7001/ovm/console
https://<IP address of the VM Manager server>:7002/ovm/console
I get a "page not found"
Ports: 7001 amd 7002 are open, as described in the above documentation.
Does someone has experience with it?
Thanks by advance for any tips.
Kind Regards.

Hi,
There is probably no much difference between the two.
The reason I have tried with 3.0.2 is that the minimun required RAM for installation is 4G.
With 3.1.1 it is 6 G, and I have a limitation in memory.
Or does someone know if it possible to perform the installation with less RAM that what is specified?
Kind Regards.

Similar Messages

  • TNS-04012: Unable to start Oracle Connection Manager instance.

    Hi,
    I've tried to configure Connection Manager but i fails on:
    TNS-04012: Unable to start Oracle Connection Manager instance
    This is my configuration (I've removed as much as possible to remove possible errors):
    CMAN1=(CONFIGURATION=
      (ADDRESS=(PROTOCOL=tcp)(HOST=<hostname>)(PORT=1522))
      (RULE_LIST=
       (RULE=(SRC=*)(DST=<IP>)(SRV=*)(ACT=accept))))
    CMCTL> administer CMAN1
    Current instance CMAN1 is not yet started
    Connections refer to (ADDRESS=(PROTOCOL=tcp)(HOST=<hostname>)(PORT=1522)).
    The command completed successfully.
    CMCTL:CMAN1> startup
    TNS-04012: Unable to start Oracle Connection Manager instance.I've reviewed following notes without getting any closer (298916.1 and 733421.1)
    I can't see any errors in any of the following possible issues:
    * The max_connections value must not exceed 1024. Maximum acceptable value is 1024
    * The max_gateway_processes value must not exceed 64. Maximum acceptable value is 64
    * The trace_directory and log_directory values must be valid
    * The trace_level and log_level values do not support numeric values 6,10 and 16
    * Duplicate sections
    * Misspelled parameter names or parameter values
    * Host values that are not resolvable
    * Rule list must allow the local address of the machine where cman is installed
    * A specfic address in SRC or DST for a rule in the rule list must be resolvable(Try ip address range as a workaround and see the enhancement request 6125025)
    * Windows: Ensure the ORA_DBA group is present and O/S user starting CMAN is in the group
    * Windows: Ensure any firewall is not blocking Oracle from using Network
    All help are appreciated!
    Cheers

    933746 wrote:
    Osama_mustafa wrote:
    Refer to
    Troubleshooting Guide: TNS-04012: Unable to Start Oracle Connection Manager Instance [ID 733421.1]Hi,
    As I've stated in my post I've reviewed this post without any help.I would suggest you read the provided doc [ 733421.1] more thoroughly.... the answer is there.

  • Error while installing oracle identity manager

    Im using windows installer. I get error below when installing Oracle Identity Manager, any idea to solve this?
    Following Error occured during schema creation connected
    ERROR loading database script C:\oracle identity manager\OIM9.0.1.1\installServer\Xellerate/db/oracle/xell.sql!
    Please contact your DBA! ORA-06550: line 1,
    column 7: PLS-00905: object KOD.PIN_OBJ is invalid ORA-06550: line 1,
    column 7: PL/SQL: Statement ignored [12/13/06 11:36 AM]
    ------------------------------------------------------------------------------

    Hi,
    I got the same error:
    Following Error occurred during schema creation connectedError loading database scriptD:\appl\OIM_902_RC\OIM_902_RC\installServer\Xellerate/db/oracle/xell.sqlPlease contact your DBA!ORA-06550: line 1, column 7: PLS-00905: object VIM_ADMIN.PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: Statement ignored [12/8/06 5:57 PM]      
    But I could fix it by dropping the schema and recreate it by only executing the prepare_xl_db.sh script as dba user on database server:
    1.     Copy the scripts prepare_xl_db.sh and xell_db_prepare.sql from the distribution CD/Directory to a directory on the machine hosting the database where there is (as the account user performing this task) write permission.
    2.     Run the prepare_xl_db.sh script by entering the following command:
    ./prepare_xl_db.sh
    3.     Provide information appropriate for the database and host machine when the script prompts for the following items:
    •     The location of the Oracle home (ORACLE_HOME)
    •     The name of the database (ORACLE_SID)
    •     The name of the Oracle Identity Manager database user to be created
    •     The password for the Oracle Identity Manager database user
    •     The name of the tablespace to be created for storing Oracle Identity Manager data
    •     The directory in which to store the data file for the Oracle Identity Manager tablespace
    •     The name of the data file ( no need to append the .dbf extension)
    •     The name of the temporary tablespace
    4.     Check the prepare_xell_db.lst log file located in the directory where the xell_db_prepare script was run from to see execution status and additional information.

  • Error when installing Oracle Identity Manager 9.1.0.1

    Hello friends,
    I installed Oracle Identity Manager 9.1.0.2 Oracle Weblogic Server on a cluster, at the time of treaties authenticated in the web console of Oracle Identity Manager, I get the following message:
    A system error was encountered.
    View the full log here
    http://pastebin.com/ucN1LHP4
    BUILD FAILED
    /opt/oim/xellerate/setup/setup.xml:447: The following error occurred while executing this line:
    /opt/oim/xellerate/setup/weblogic-setup.xml:318: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 3 failed: [Deployer:149026]deploy application Nexaweb on oimCluster.
    Target state: deploy failed on Cluster oimCluster
    javax.servlet.ServletException: [HTTP:101249][ServletContext@59809215[app:Nexaweb module:/Nexaweb path:/Nexaweb spec-version:null]]: Servlet class com.nexaweb.loader.ClientLoaderServlet for servlet ClientClassServlet could not be loaded because the requested class was not found in the classpath .
    java.lang.ClassNotFoundException: com.nexaweb.loader.ClientLoaderServlet.
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:551)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
         at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:508)
         at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:418)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
         at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
         at org.apache.tools.ant.Task.perform(Task.java:348)
         at org.apache.tools.ant.Target.execute(Target.java:357)
         at org.apache.tools.ant.Target.performTasks(Target.java:385)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
         at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
         at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
         at org.apache.tools.ant.Main.runBuild(Main.java:758)
         at org.apache.tools.ant.Main.startAnt(Main.java:217)
         at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
         at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
    Caused by: /opt/oim/xellerate/setup/weblogic-setup.xml:318: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 3 failed: [Deployer:149026]deploy application Nexaweb on oimCluster.
    Target state: deploy failed on Cluster oimCluster
    javax.servlet.ServletException: [HTTP:101249][ServletContext@59809215[app:Nexaweb module:/Nexaweb path:/Nexaweb spec-version:null]]: Servlet class com.nexaweb.loader.ClientLoaderServlet for servlet ClientClassServlet could not be loaded because the requested class was not found in the classpath .
    java.lang.ClassNotFoundException: com.nexaweb.loader.ClientLoaderServlet.
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:551)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
         at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.java:357)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
         at sun.reflect.GeneratedMethodAccessor167.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
         at org.apache.tools.ant.Task.perform(Task.java:348)
         at org.apache.tools.ant.Target.execute(Target.java:357)
         at org.apache.tools.ant.Target.performTasks(Target.java:385)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
         at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
         at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
         at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
         ... 16 more
    Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 3 failed: [Deployer:149026]deploy application Nexaweb on oimCluster.
    Target state: deploy failed on Cluster oimCluster
    javax.servlet.ServletException: [HTTP:101249][ServletContext@59809215[app:Nexaweb module:/Nexaweb path:/Nexaweb spec-version:null]]: Servlet class com.nexaweb.loader.ClientLoaderServlet for servlet ClientClassServlet could not be loaded because the requested class was not found in the classpath .
    java.lang.ClassNotFoundException: com.nexaweb.loader.ClientLoaderServlet.
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:551)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
         at weblogic.Deployer.run(Deployer.java:72)
         at weblogic.Deployer.mainWithExceptions(Deployer.java:62)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy.java:419)
         at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.java:349)
         ... 28 more
    Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 3 failed: [Deployer:149026]deploy application Nexaweb on oimCluster.
    Target state: deploy failed on Cluster oimCluster
    javax.servlet.ServletException: [HTTP:101249][ServletContext@59809215[app:Nexaweb module:/Nexaweb path:/Nexaweb spec-version:null]]: Servlet class com.nexaweb.loader.ClientLoaderServlet for servlet ClientClassServlet could not be loaded because the requested class was not found in the classpath .
    java.lang.ClassNotFoundException: com.nexaweb.loader.ClientLoaderServlet.
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:551)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
         at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:542)
         at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
         at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
         at weblogic.utils.compiler.Tool.run(Tool.java:158)
         at weblogic.utils.compiler.Tool.run(Tool.java:115)
         at weblogic.Deployer.run(Deployer.java:70)
         ... 35 more
    As I can solve this problem, not to reinstall everything again
    thanks

    Not sure if I understand your issue correctly. Your deployment failed during the installation and you have started the servers and trying to login?
    When installing OIM in a clustered WLS domain, the docs specify various cluster configurations needed to be completed in the WLS Admin Console before running the OIM installer. These steps DO NOT include starting up of the first managed server. In fact, if you start up the managed server then you may very well run into deployment issues after the OIM application is built. Instead, when installing OIM, the installer detects that not all nodes are on-line and so will queue the deployment for later. Deployment then takes place in later steps when you are instructed to restart the app server and start managed nodes.
    Thus was your managed server running when you were doing the installation? That has caused the issue. I would suggest to dump this domain (save the .xldatabasekey) if you don't wanna to dump the database part and start the installation again BUT don't start the managed server while doing the installation.
    HTH,
    BB

  • Problem installing Oracle Identity Manager Server  9.1

    Hello,
    I try to install oracle identity Manager Server 9.1, but I'm having a problem.
    Oracle identity manager 9.03 is already installed with jboss-4.0.3SP1 and j2sdk1.4.2_15
    and oracle 10.2.0
    So I follow these steps to clean out the db:
    1. Drop tablespace: drop tablespace oimtbs including contents;
    2. Drop user: drop user oimuser cascade;
    and ran prepare_xl_db.bat as instructed. No errors in the log.
    I ran the DiagonasticDashboard : the db setup was fine.
    When I ran the installer "setup_server.exe", i haved this message :
    Folowing Error occured during schema creation
    Error encountered while loading database script
    E:\OIM_Install\OIM9100\installServer\Xellerate/db/oracle/xell.sql
    Please contact your DBA!
    maximum key length (1478) exceeded
    Does anybody have any idea what this error is about ?
    Thanks.

    Index IDX_LKV_LKV_ENCODED on Table LKV (Column :- LKV_ENCODED - VARCHAR2(3000)) is failing on 2k block size. Though all the Indexes are working fine with the 4k block size.
    But OIM Dev team recommends to create the 8k block size for the Index storage.
    Because the blocksize affects the number of keys within each index node, it follows that the blocksize will have an effect on the structure of the index tree. All else being equal, large blocksizes will have more keys, resulting in a flatter index than the same index created in a 2k tablespace. A large blocksize will also reduce the number of consistent gets during index access, improving performance for scattered reads access.
    HOW TO CREATE THE INDEXES IN LARGER BLOCKSIZE TABLESPACE
    In the existing database:-
    Create a tablespace with the 8k blocksize, For Example
    First,
    Set the system cache size for that particular db block size
    sql> alter system set db_8k_cache_size=100M;
    sql> CREATE TABLESPACE db_8k_tablespace DATAFILE 'C:/oracle/product/10.2.0/oradata/8k_file.dbf' SIZE 100M BLOCKSIZE 8192;
    Then
    Reorganize the Index using command:-
    sql> Alter Index <Index_Name> Rebuild tablespace <Tablespace_Name>
    Regards,
    Neeraj Goel

  • How do I install Oracle Configuration Manager in oracle Fusion - discoverer 11i

    Hello Gurus,
    I need some guidance to install Oracle Configuration Manager.
    I have just successfully installed Oracle Fusion - following "Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1.6.0) (Part Number E10421-07)" without OCM. I have EBS 12.1.3 and rdbms 11.2.0 on the same server.
    Thanks
    Mathias

    ikaros wrote:
    I have installed OracleAS 10g. What should I download now in order to install Oracle Portal 10g?Portal (actually Portal and wireless) is one of the three installation types of a full-fledged OAS 10g in release 1 and 2.
    You need to have an infrastructure as a pre-requisite for a portal type OAS installation.
    Please see this [link and the whole guide - click Content on the top-right|http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/mt.htm#sthref508] for details and then decide what have you installed that you are referring to as OAS 10g.
    thanks,
    AMN

  • Unable to install Oracle 9.0.1 on Linux RedHat

    Hi,
    I am unable to install Oracle 9.0.1 on Linux RedHat, tried many times. While installing i get following errors-
    "Error in invoking target install of makefile
    /usr/oracle/9.0.1/plsql/lib/ins-plsql.mk"
    "error in invoking target ioracle of makefile
    /usr/oracle/9.0.1/rdbms/lib/ins-rdbms.mk"
    "Error loading native library : libnjni.so"
    Installation halts while configuring Net Confugration Assistant....
    Any workaround ???
    Thanks in advance.

    There are many versions of RedHat. Your post indicates you are using one of them, but your post really does not give a hint as to which one. Funny thing is - different versions have different install requirements.
    I really don't understand why operating system version is such a big secret. Especially since it is logically so critical to installation issue. Even when installing on Windows, the first questions is 'which Windows'.
    You have, of course, followed the suggestions at http://www.puschitz.com and noted the errors and workarounds, have you not.
    Especially about things like packages and versions.

  • Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0

    Hi all,
    I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
    /usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
    /usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
    /usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
    Here's the actual (make failure) log entry:
    gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
    /usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
    /usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
    /usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
    collect2: ld returned 1 exit status
    make: *** [rwbuilder] Error 1
    The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
    Richard Foley
    ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
    *** End of Installation Page***
    The installation of Oracle Developer Suite 10g was successful.
    Edited by: orafoley on Oct 14, 2008 5:19 PM

    Hi Hub,
    Done that, nothing:
    $> env | grep -i LD
    $>
    On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
    Oracle 10.2.01
    Oracle Developer Suite 10i (ODS 10.12.02)
    SuSe 11.0
    Now when I runInstaller I get this, which is surprisingly similar:
    Start output from spawned process:
    rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
    rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
    rm -f rwsutil.o rwspid.o ; \
    /usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
    (LD_OPTIONS="-z muldefs"; \
    /usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
    -lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
    rm -f zrhitem.o zrhcursor.o; \
    /usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
    rm -f rwbuilder
    gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
    /usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
    /usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
    /usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
    collect2: ld returned 1 exit status
    make: *** [rwbuilder] Error 1
    End output from spawned process.
    Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
    Richard.

  • How to install Oracle Policy Manager?

    Hi,
    I'm trying to install Oracle Policy Manager on a server w/Oracle.
    I already have Oracle DB & Client 10gR2 installed and configured, and all is working fine.
    I've read that to install Policy Manager, I have to install it from the Client CD. When I did the initial install, I chose 'Administrator' install.
    I ran the installer again and chose 'Custom' but didn't see anything that related to Policy Manager.
    Where can I find this?
    Thanks,
    Nora

    Hi
    OPM, oracle policy manager, is installed with the old enterprise manager.
    OPM is to manage VPD, virtuell private database and label security.
    Label Security is an extra Option.
    Regards
    Roman

  • Install Oracle VM Manager 2.1 error

    When installing Oracle VM Manager I am getting the following error:
    Please enter the choice: [1|2]
    1. Install Oracle VM Manager
    2. Uninstall Oracle VM Manager
    1
    Starting Oracle VM Manager installation ...
    Checking the supported platforms ... Done
    Checking the prerequisite packages are installed ... Done
    Checking the available disk space ... Done
    Installing the oracle-xe-univ package (rpm) ... Failed.
    Please check log from /var/log/ovm-manager/xe.log
    Aborting installation. Please check the environment and rerun runInstaller.sh.
    2008-02-05-09-45
    warning: source/oracle-xe-univ-10.2.0.1-1.0.i386.rpm: Header V3 DSA signature: NOKEY, key ID b38a
    8516
    Preparing... ##################################################
    oracle-xe-univ warning: /etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
    ###########warning: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/postDBCrea
    tion.sql saved as /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/postDBCreati
    on.sql.rpmorig
    error: unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/co
    nfig/seeddb/xeseed.dfb;47a8768d: cpio: read failed - Inappropriate ioctl for device
    Any ideas on the cause of this error?

    I checked and those checksums match up. I burned the .zip file to a cd. I copied the .zip to the local file system and unzipped to get the iso. I then ran the mount command to /media/iso. From the iso directory I ran the installer and now I am getting:
    Buffer i/o error on device loop 2, logical block 133638
    source/oracle-xe-univ-10.2.0.1-1.0.i386.rpm: not an rpm package (or package manifest): input / output error.
    I tried to manually install the rpm packages just to test and it said "not an rpm package"
    If I burned the .iso file to a cd I get the cpio error.
    I guess my next thing to do is download the zip file from a linux box.

  • Installing Oracle Enterprise Manager 10G on Fedora 2

    During installation Oracle Enterprise Manager on Fedora 2 I receive message, that my computer has 0 Mb RAM , and installation stops. In fact my host has 1024 Mb Ram. It seems to me, that installer can't correctly determine the value of RAM.
    How can I switch off this check, or how to provide the installer the right data?

    generally im specfiying it in c:\documents and settings\Program, but im installing it from c:\documents and settings\my documents\software.
    I got another verson of Orcle, ive downladed the developer sute 10g, in this case the college where i go to use, it to connect. so i expect i will have to really uninstll that and the instll in Oracle Enterprise 10g.
    ive got screen shots of the process i am going through, in order to get a sucessfull installation.
    If anyone has msn please come online so i can send you the screen shots of what is happening when i try and install in Orcale enterprise 10g on my pc
    my email address is
    [email protected]
    or send me an email wid the subject: Help with installing Oracle enterprise manager 10g or a hello so i know its from a forum reply

  • How to install oracle connection manager on solaris 10

    I have installed oracle application server 10.1.2 on solaris 10. How do i install oracle connection manager utility.
    My end goal is to use applets/jdbc.
    Thanks

    Thank you Zettabyte!!
    Folks, network printers should NOT BE configured like this:
    lpadmin -p somequeue -s someprinter
    that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
    Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
    You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
    The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

  • How to install Oracle Change Management Pack for 11g database.

    Hi,
    I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
    Oracle Configuration Management Pack
    Oracle Data Masking Pack
    Oracle Diagnostic Pack
    Oracle Tuning Pack
    using following URL
    http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
    Regards
    DBA.

    As far as I could understand, this is a part of Oracle EM/Grid installation:
    The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software.

  • Error when installing Oracle Identity Manager

    Hello,
    I'm having a problem when trying to install Oracle Identity Manager. I am trying it now for consecutive two days and it is always the same problem.
    I read this thread:
    Problem installing Oracle Identity Manager Server (but still have no clue what to do).
    I'm installing it in a virtual lab environment (Windows Server 2008 on WMware).
    It is a fresh install.
    Installing scenario:_
    *1.* Oracle Database 10g (10.2.0.3)
    *2.* Toad DBA Suite for Oracle
    *3.* Oracle Weblogic Server 11g R1
    *4.* Oracle Identity Manager v9.1.0.1
    *5.*
    Then i create a new Oracle database instance for Oracle Identity Manager as described here:
    http://download-east.oracle.com/docs/cd/B32386_01/generic.902/b32140/database.htm
    *6.*
    Then i prepare the DB for Oracle Identity Manager by running:
    prepare_xl_db.bat XELL C:\Oracle\product\10.2.0\db_1 xelsysadm password123 xeltbs C:\Oracle\product\10.2.0\oradata xeltbs_01 TEMP password123
    as described here (Preparing the Database on Windows):
    http://download-east.oracle.com/docs/cd/B32386_01/generic.902/b32140/database.htm
    *7.*
    I get no errors after running the script has finished
    *8.*
    Then i run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
    *9.*
    I go throw the steps and after installing the following error pop ups:
    Following Error occurred during schema creation  connected*
    Error encountered while loading database script*
    +...\Oracle Identity Manager v9.1.0.1\OIM9101\installServer\Xellerate/db/oracle/xell.sql+
    Contact your DBAORA-06550: line 1, column 7: PLS-00905: object SYSTEM.PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: Statement ignored [10/7/09 12:18 PM]*
    *10.*
    Then i click next and this message pop ups:
    Oracle Identity Manager Installer has found that SetDBKey.bat failed.*
    *11.*
    Then the setup ends/aborts
    Does anybody have any idea what this error is about and how to work around?
    I would really appreciated it. I am getting desperate, because i don't know what i am doing wrong. Thank you very much in advance!

    daniel/maki,
    I'm trying to install Oracle Identity Manager. After giving the inputs for all screen, in the end it give me error "SetDBKey.bat error"
    My Products:
    1. Oracle Database 10g (10.2)
    2. Oracle Application Server 10g R3
    3. Oracle Identity Manager v9.1.0.1
    My Installation Steps:
    1. Installed Oracle Application server and upgraded to 10.3.3
    2. Installed Oracle Database 10g and created database idmda2
    3. Prepared Database for OIM
    prepare_xl_db.bat idmda2 C:\oracle\product\10.2.0\db_1 sysadm sysadm orctbs C:\Oracle\product\10.2.0\oradata orcltbs_01 TEMP test23
    I get no errors after running the script has finished
    4. Deployed the application XIMDD on OAS
    verified for prerequisities
    5. Then i run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
    At the "Provide databse connectivity information" screen I have used the "sysadm" which i used at the time of preparing the database for oim
    I am not using "system" account and still i am getting "Oracle Identity Manager Installer has found that SetDBKey.bat failed" error.
    What is that i am missing here?
    6. Then the setup ends/aborts
    Thank you very much in advance!

  • Error while installing oracle enterprise manager 11g

    Hello,
    I am trying to install Oracle enterprise manager 11g & keep on
    getting following error at install progress stage :
    Error in setting permission of file/directory
    /u01/labuser/Oracle/Middleware/oracle_common/oui/jlib/emocmul.jar
    with 3 options Retry,Ignore & cancel.
    Could anyone guide why i am getting this error & how to fix this problem ?
    Thank-You
    Rahul Shah.

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Enterprise Manager which you can get more quick response
    Regard
    Helios

Maybe you are looking for

  • EFS Encrypted Files over home workgroup network via WebDAV avoiding Active Directory fixing Access Denied errors

    This is for information to help others KEYWORDS:   - Sharing EFS encrypted files over a personal lan wlan wifi ap network   - Access denied on create new file / new fold on encrypted EFS network file share remote mapped folder   - transfer encryption

  • Email not getting through to my account

    For the last 24 hours or so I have been experiencing problems when users in Europe have unable to send me emails using my @me.com,@mac.com or @icloud.com accounts. Is anyone else getting this issue please? Thx John

  • NOKIA N70. IS THIS EVEN POSSIBLE???

    NOKIA N70 - DIALLING ITSELF Could you please advise me on this issue to clear it up with my mobile phone provider. For the last two years I have been using this phone with a prepaid card, without any problem. From 6th April 2010 I took a phone plan w

  • Why do my sync'd photos all look pink

    I just upgraded itunes to 10.5 and my iPad1 to iOS 5.  When I sync my photos, they all have a pink tint to them.  Previously, my photos were true to the pics that I have saved on my PC.  Is anyone else seeing this? 

  • Sort a table with two columns based on the first

    I have a powershell table with the columns 'Used Perc' and 'ID'. This was formed from the following  $a = @{Expression={[System.Math]::Round(($_.nUsed_Avg/$_.nSize)*100,1)};Label="Used Perc";width=25}, @{Expression={$_.nStatisticalDiskIdentificationI