Unable to install rollup4 for Exchange 2010 SP3

Hi,
I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
I know that this process will take some time to complete but I have waited 10 hours.
I've tried to reboot the server and restart the setup.
Exchange is functioning perfectly otherwise.
Any help would be greatly appreciated :)
/Søren Emig

Hi,
I recommend you check if the anti-virus has been disabled before you start the upgrade process.
If you didn't ,the update could fail or take an extended amount of time.
Also, disable all other third-party apps/plugins that might be installed (like backup agents).
In addition,the following articles for your reference:
Install the Latest Update Rollup for Exchange 2010
When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
The installation takes a long time to complete.
You receive the following message during the installation: Creating native images for .Net assemblies
When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
To work around this issue and to reduce installation times, turn off the
Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the Advanced tab, and then locate the Security section.
Clear the Check for publisher’s certificate revocation check box, and then click
OK.
After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
Generating NGEN images takes longer than expected
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Support Forefront Protection 2010 for Exchange 2010 SP3

Hi
I have a simple question: Is there a full support of FPE 2010 (Version 11.0.727.0) for Exchange 2010 SP3 (and Rollup Updates)?
Thomas

Hi,
It seems that FPE 2010 for exchange 2010 SP3 is supported and you need to install the Rollup 4. For more detailed information, please refer to the link below:
Hotfix Rollup 4 for Microsoft Forefront Protection for Exchange
Updates for Microsoft Forefront and Related Technologies
Hope this helps!
Susie

Latest Update Rollup for Exchange 2010 SP3

Hi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMS

Hi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMS
Personally, if you are going to update the servers, you should apply the latest RU regardless. So I would go with RU7.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Rollup 6 for Exchange 2010 SP3

Does anyone know when Microsoft is going to release either Rollup 6 or a patch for Exchange 2010 SP3? Rollup 3 for SP3 introduced the following issues:
“Some users (not all of them) report that they don't see new emails in their Outlook 2010 box on Shared folders, even though they got the new email message envelope. When they change folder and back to the Inbox the new mail is suddenly visible. Same sort
of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.”
We have installed Rollup 5 but it did not address the issue.
Thanks
Dave

Hi,
Currently, there is no official document about the release of RU6 for Exchange 2010 SP3. If the RU6 for Exchange 2010 SP3 will be coming, you can find this information in the Exchange Team Blog.
http://blogs.technet.com/b/exchange/
Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How do I know which update rollup is installed on my exchange 2010 sp3 server ?

how do I know which update rollup version is installed on my exchange 2010 sp3 server ?
Anand_N

And take a peek here:
http://blogs.technet.com/b/rmilne/archive/2013/10/29/how-to-check-exchange-2010-ru-version.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?

Quick question.
What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?
Hasan

Hi
Your question is a big vague. Extracting the rollup will use some space but you can delete the files afterwards.
Are you concerned about space while installing? If you have adequate space it shouldnt be a problem.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I am asking space after installation, it will definitely install some files so how much space extra space it needed in exchange directory drive.
Hasan

Trying to install SP1 for Exchange 2010 on Win Server 2008 R2. A pre-req is KB982867. It is no where to be found. How to find it?

The SP1 wizard says "Install Hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867
However, that link no longer exists.
How to get this hotfix?
Another post said that the Win 7 hotfix would work. Windows6.1-KB982867-v2-x64 But I can't locate that either.
How to fix?
john11

Hi John,
Exchange 2010 Service Pack 3 is the latest service pack. It is recommended to install it. Service Packs are cumulative, Exchange 2010 SP3 includes all fixes included in previous RUs and service packs. Here is a blog for your reference:
Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working

Below is my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
also select mailboxes in their Outlook that were NOT auto mapped.
With that said, here is how I fixed them all.
Remove the permissions using the Exchange Console. Don't forget Send As
Wait about 15 minutes. The mailbox should disappear from the users Outlook
Open an Exchange PowerShell window and run the following command:
.\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
Have the user add the mailbox to their Outlook using the manual process.
All is well....
If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
specify automap $false.
The idea here is to grant the user access without auto mapping.

OWA errors after install RU4 on Exchange 2010 SP3

hi,
i have a problem with OWA.
when i installed the RU4 on my server, the program files\microsoft\exchange server\v14\clientaccess\owa\14.3.174.1 folder is empty, this folder size (the subfolders created) is 1,3 MB and the 14.3.123.3 size is 19,3 MB. when i loging from OWA i
see this error message:
Outlook Web App didn't initialize. If the problem continues,
please contact your helpdesk.
Couldn't find a base theme (folder name=base)
and this event in my server eventlogs:
Outlook Web App couldn't initialize.
A base theme couldn't be found. The base theme must be in a folder with name = "base".
thx,
Frenki

hi,
i found this log on my server: UpdateCas.log
[03:09:46] ***********************************************
[03:09:46] * UpdateCas.ps1: 2013.12.13. 3:09:46
[03:09:46] Error updating OWA/ECP: The term 'Get-ExchangeServer' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
this registry entries missing (E2010 and the Support):
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Exchange.Management.PowerShell.E2010]
"CustomPSSnapInType"="Microsoft.Exchange.Management.PowerShell.AdminPSSnapIn"
"ApplicationBase"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin"
"AssemblyName"="Microsoft.Exchange.PowerShell.Configuration, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
"Description"="Admin Tasks for the Exchange Server"
"ModuleName"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin\\Microsoft.Exchange.PowerShell.Configuration.dll"
"PowerShellVersion"="1.0"
"Vendor"="Microsoft Corporation"
"Version"="14.0.0.0"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Exchange.Management.PowerShell.Setup]
"CustomPSSnapInType"="Microsoft.Exchange.Management.PowerShell.SetupPSSnapIn"
"ApplicationBase"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin"
"AssemblyName"="Microsoft.Exchange.PowerShell.Configuration, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
"Description"="Setup Tasks for the Exchange Server"
"ModuleName"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin\\Microsoft.Exchange.PowerShell.configuration.dll"
"PowerShellVersion"="1.0"
"Vendor"="Microsoft"
"Version"="14.0.0.0"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Exchange.Management.Powershell.Support]
"CustomPSSnapInType"="Microsoft.Exchange.Management.Powershell.Support.SupportPSSnapIn"
"ApplicationBase"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin"
"AssemblyName"="Microsoft.Exchange.Management.Powershell.Support, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
"Description"="Support Tasks for the Exchange Server"
"ModuleName"="C:\\Program Files\\Microsoft\\Exchange Server\\V14\\bin\\Microsoft.Exchange.Management.Powershell.Support.dll"
"PowerShellVersion"="1.0"
"Vendor"="Microsoft Corporation"
"Version"="14.0.0.0"
i ran next the UpdateCas.ps1 according to your second link.
and the OWA is working :D
thank you very much,
Frenki

Event ID 9877, Exchange 2010 SP3 RU4

On 2/19 I installed RU4 for Exchange 2010 SP3 on a server at a client's site. This is a single server with all the roles on it, with about 40-45 mailboxes. Ever since then, during the busiest hours of the day (around 7AM to 5:30PM or so), I get the
following event log error on this server:
Log Name:      Application
Source:        MSExchangeIS Mailbox Store
Date:          2/20/2014 6:58:49 AM
Event ID:      9877
Task Category: Content Indexing
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      server.domain.com
Description:
Content Indexing function 'CISearch::EcGetRowsetAndAccessor' received an unusual and unexpected error code from MSSearch.
Mailbox Database: Mailbox Database 0784353824
Error Code: 0x80043629
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchangeIS Mailbox Store" />
    <EventID Qualifiers="49198">9877</EventID>
    <Level>2</Level>
    <Task>46</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-20T11:58:49.000000000Z" />
    <EventRecordID>423922</EventRecordID>
    <Channel>Application</Channel>
    <Computer>server.domain.com</Computer>
    <Security />
</System>
<EventData>
    <Data>CISearch::EcGetRowsetAndAccessor</Data>
    <Data>Mailbox Database 0784353824</Data>
    <Data>0x80043629</Data>
    <Binary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inary>
</EventData>
</Event>
The frequency of these errors varies and it definitely seems to be related to the amount of traffic. Over the weekend it only occured about 5-10 times a day. For the past couple of days, it's been pretty constant about every 15 minutes or
so all day.
I've looked this up, but I've only found a few posts mentioning similar errors, all relating to earlier versions of Exchange 2010. Supposedly this problem was fixed in one of the rollups to SP1 or SP2, I think. I never saw these errors, though,
until the SP3 RU4 rollup. I haven't heard any complaints from users, but I'm concerned that this might escalate and start causing noticeable searching issues.
Any ideas would be appreciated.
Deb

Hi Deb,
We're getting the same error as you on Exchange 2010. We have exchange 2010 and exchange 2013 running in a coexisting environment. Since we applied Service Pack 1 for Exchange 2013, we've had nothing but issues!
I've tried the rebuild of the index catalogues by following these instructions:
http://ghousewin.blogspot.in/2012/08/not-able-to-search-in-owa-event-id-9877.html
This failed to resolve the issues too. We've rebooted the server, restarted all the search services and still nothing! We're pulling our hair out here!
The only thing I haven't tried is the prepareAD commands in this post:
http://social.technet.microsoft.com/Forums/exchange/en-US/7a4a7400-a582-4f95-9360-6d84e66e87ad/ex2010-2node-dag-search-in-owa-not-working-caused-by-eventid-9877-content-indexing-function
I'm unable to try this during the day as we have no testing
environment and would hate to mess the production environment up if this went wrong.
If you're able to try this during the day, would you let us know how it goes?
Many thanks,
Stephen

Exchange 2010 SP3 Update 7 breaks OWA for some IE11 users

I had issues earlier with OWA on some clients running Internet Explorer 11 (as
documented in this thread), and managed to resolve it by disabling compatiblity mode in IE11.
After SP3 Update Rollup 7 the issue came back, and no tinkering with the compatibility mode will solve it.
Have anyone encountered this issue before? The issue only appears on certain machines in their own AD OU as well as own subnets.

Hi,
I haven't heard that Exchange 2010 SP3 Update Rollup 7 has this issue so far. In your case, I would like to verify if you remove all interim updates for Exchange 2010 SP3 before installing Rollup 7. If no, remove it and check the result.
Here is a kb for your reference.
Update Rollup 7 for Exchange Server 2010 Service Pack 3
http://support.microsoft.com/kb/2961522
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Out Of Office error ++ Exchange 2010 SP3 just installed sbs2011

Hello
Just recent tried to install sp1 for Exchange 2010, this failed, and ended up in installing SP3, and this went ok.
Ok, by meaning, the installation itself went OK, but the former SP1 isntallation broke a couple of things, and some was adopted to the SP3 isntalaltion.
The main issue now, is that OOF does not work.
Application log:
Event code: 3008
Event message: A configuration error has occurred.
Event time: 20.09.2014 01:20:01
Event time (UTC): 19.09.2014 23:20:01
Event ID: 93ea814206eb4f118aa76ae313723983
Event sequence: 2
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT-1-130556424012983549
Trust level: Full
Application Virtual Path: /
Application Path: C:\inetpub\wwwroot\
Machine name: SERVER
Process information:
Process ID: 640
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: ConfigurationErrorsException
Exception message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. (C:\Program
Files\Microsoft\Exchange Server\V14\ClientAccess\owa\web.config line 37)
at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
at System.Web.Configuration.RuntimeConfig.get_Identity()
at System.Web.HttpContext.SetImpersonationEnabled()
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
Request information:
Request URL: https://localhost:443/Exchange
Request path: /Exchange
User host address: ::1
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 9
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
at System.Web.Configuration.RuntimeConfig.get_Identity()
at System.Web.HttpContext.SetImpersonationEnabled()
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
Custom event details:
And if i browse to https://localhost/Exchange on the SBS2011 server i get:
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current
web application. This <customErrors> tag should then have its "mode" attribute set to "RemoteOnly". To enable the details to be viewable on remote machines, please set "mode" to "Off".

<configuration>
<system.web>
<customErrors mode="RemoteOnly"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="On" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
Tried a couple of things in IIS, amongst Set Application Pool .NET to 2 from 4
But i am not a IIS guy, so i am out of luck here, and hope some one may help.
Best regards.

Found something, regardig OOF error.
My Autodiscover is configured:
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory |fl identity,internalurl,externalurl
Identity : SERVER\EWS (Default Web Site)
InternalUrl : https://remote.domain.no/EWS/Exchange.asmx
ExternalUrl : https://remote.domain.no/EWS/Exchange.asmx
And when i test via the Outlook Test E-mail AutoConfiguration it fails:
Autosearch to https://remote.domain.com/Autodiscover/Autodiscover.xml Fails (0x800C8203)

Exchange 2010 SP3 upgrade - Event ID 4999 - Address Book Crash

0
I just upgraded an Exchange 2010 SP1 CAS server to SP3 - since then anytime an outlook client connects to the CAS server, the Address Book service crash's and event 4999 is logged in App log. I can reproduce the issue by attempting to create a new
outlook profile and checking the name against the CAS server. This crash's the service and the client recieves an error message. The contents of event ID 4999 is below. I've tried re-installing the CAS role, re-applying the schema extension
for SP3. I've installed all windows updates, enabled logging but I'm not getting anywhere. If anyone can help with this issue, I would greatly appreicate it.
Watson report about to be sent for process id: 10168, with parameters: E12, c-RTL-AMD64, 14.03.0123.004, M.E.AddressBook.Service, M.Exchange.Rpc, M.E.R.R.RfriRpcOperationBase.Complete, System.ArgumentException, a3e, 14.03.0123.002.
ErrorReportingEnabled: True
That error is followed by a message that the Address Book service has sucessfully started

Hello,
For exchange 2010 sp3, there is no article to explain the issue.
I suggest you run EXBPA aganist your exchange server health check.
Cara Chen
TechNet Community Support

Exchange 2010 SP3 Update Rollups

Hi All,
I have a question about installing Update Rollups for Exchange 2010 SP3. After some organizational changes I have to take care of windows updates and our WSUS server. During the last check I found out that there are:
Update Rollup 5,6,7 listed in WSUS for our Exchange which is (CAS, HUB, MB). I've checked also some information about installing Update Rollup but it's not very clear for me. i saw also a problems after installing Update Rollup 6 and also some info from
blogs.technet.com
The release contains fixes for customer reported issues and previously released security bulletins. Update Rollup 7 is
not considered a security release as it contains no new previously unreleased security bulletins. Customers running
any Service Pack 3 Update Rollup for Exchange Server 2010 can move to Update Rollup 7 directly.
So, what is the best way to do it?
- Decline old Update Rollups, Install all other security and critical updates from WSUS, reboot the server, install Update Rollup 7, reboot the server?
Thanks in advance

Hi kondio
Thank you for your question.
Service packs and update rollups are part of the servicing strategy for Exchange 2010. They provide an effective and easy-to-use method to distribute Exchange 2010 fixes and modifications. We recommend that you install the latest service pack and update
rollup to keep the product up-to-date.
I suggest you update manually instead of WSUS.
You can refer to the following link to read about RU:
http://technet.microsoft.com/en-us/library/ff637981(v=exchg.141).aspx
If there are any questions, please let me know.
Best Regard,
Jim

How to test if Spam protection with Forefront for Exchange 2010 works

Hi there.
Installed forefront for exchange 2010 on Exchange Edge server.
We have tested virus protection with creating EICAR, but the question is, is there a way to check if SPAM Works fine, and how to?
with best regards
bostjanc

Hi bostjanc,
Since this is an issue on the Forefront side, I suggest ask Forefront Forum for help so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FOPE
However, based on my knowledge, use the EICAR antivirus test file is the only built-in method to check whether the Anti-Spam configured correctly.
You can try to send some test spams to your Exchange server for testing, even if this is a stupid method : )
Thanks
Mavis Huang
TechNet Community Support

Unable to install rollup4 for Exchange 2010 SP3

Similar Messages

Maybe you are looking for