Unable to install windows 7(windows cannot create a new partiton or locate an exiting one )

I AM UNABLE TO INSTALL WINDOWS 7 HOME PREMIUM ON MY LAPTOP
MY LAPTOP SPECIFICATIONS ARE=
1 GB RAM
INTEL GMA 900 MOBILE SERIES
INTEL ATOM
160 GB HDD
CURRENTLY RUNNING LINUX MINT 15
THE ERROR=
SETUP WAS UNABLE TO CREATE A NEW PARTITION OR LOCATE AN EXISTING ONE CHECK SETUP LOG FOR MORE INFORMATION
PLEASE REPLY FAST

i tried out this method it doesn't work. Actually i have a nOTEBOOK which came with windows xp i planned to upgrade it because microsoft has stopped supplying updates.
my NOTEBOOK is of Medion company.
modal=akoya e1210 
msn no.30008507
LINK FOR NOTEBOOK OFFICIAL PAGE AND SPECS
http://www.pcpro.co.uk/reviews/laptops/247451/medion-akoya-mini-e1210
by the thanks for replying an method

Similar Messages

  • Windows 8 installation error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."

    I recently tried testing Server 2012 for installation and I had a major issue.  Windows 8 also uses the same method for installation so this should also apply to Windows 8.  I thought this might be helpful for other people who have the same
    problem.  My setup is a 1U server with no DVD drive, no hard drives, and only USB.  I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive.  I kept receiving the following error when
    I tried to format the hard drive and proceed with the installation:
    "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
    After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it.  Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc). 
    In my case, it was the installation drive itself was a thumb drive.  I ended up digging up an external DVD drive and placed the installation onto a DVD.  Worked flawlessly.  Now I am up and running.
    I tried
    the steps here to no avail.
    Hope this helps anyone else with the same problems.

    Hi,
    Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
    Leo Huang
    TechNet Community Support

  • "We couldn't create a new partition or locate an existing one. Form more information, see setup log files"

    Ok so back in August 2014 I succuesfully used bootcamp to install Windows 10 Tech preview. It worked great until March of this year when Windows issued an update (Which I had no control over).  After this update the R9 4GB graphics card driver stopped working.  I contacted Apple/AMD/Microsoft but was unable to fix this problem.
    So,  I uninstalled Windows 10 through bootcamp and restored the drive to a single partition. I purchased windows 8.1 and downloaded Windows Enterprise edition (as this comes as an ISO file) and started the process again with Bootcamp. Everything works great until I get to the installation of windows.
    I did the same as last time (formatted the Bootcamp partition) and tried to continue the installation. I now get the following message:
    I have tried a complete reinstall of the system twice (back to factory settings) but still the same issue.  I have also tried using Windows 10 Tech preview but still the same issue. (I only have my remote drive with the ISO file connected to the mac and have tried with a USB stick)
    Any ideas would be much appreciated! Thanks

    Thank you for your prompt response.  Please see below:
    Last login: Thu Apr 30 09:15:48 on console
    Jeremys-iMac:~ jeremygaster$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *121.3 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         121.0 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:          Apple_CoreStorage                         999.3 GB   disk1s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *1.1 TB     disk2
                                     Logical Volume on disk0s2, disk1s2
                                     E693210D-5893-4CC0-B3FF-18B5A92179CB
                                     Unencrypted Fusion Drive
    Jeremys-iMac:~ jeremygaster$ diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group 5BEBA89D-FBF8-45AF-99CF-DFB82BC6B9E8
        =========================================================
        Name:         Internal Drive
        Status:       Online
        Size:         1120333979648 B (1.1 TB)
        Free Space:   114688 B (114.7 KB)
        |
        +-< Physical Volume 2EF54FBF-26BB-4D56-A84E-947205800865
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     120988852224 B (121.0 GB)
        |
        +-< Physical Volume B66237C5-F9ED-454C-9AFB-90553B0D0E0A
        |   ----------------------------------------------------
        |   Index:    1
        |   Disk:     disk1s2
        |   Status:   Online
        |   Size:     999345127424 B (999.3 GB)
        |
        +-> Logical Volume Family A91C5378-D285-434D-B33B-5F1E0CC64C62
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
            |
            +-> Logical Volume E693210D-5893-4CC0-B3FF-18B5A92179CB
                Disk:                  disk2
                Status:                Online
                Size (Total):          1114478608384 B (1.1 TB)
                Conversion Progress:   -none-
                Revertible:            No
                LV Name:               Macintosh HD
                Volume Name:           Macintosh HD
                Content Hint:          Apple_HFS
    Jeremys-iMac:~ jeremygaster$ sudo gpt -vv -r show /dev/disk0
    WARNING: Improper use of the sudo command could lead to data loss
    or the deletion of important system files. Please double-check your
    typing when using sudo. Type "man sudo" for more information.
    To proceed, enter your password, or type Ctrl-C to abort.
    Password:
    Sorry, try again.
    Password:
    gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
    gpt show: /dev/disk0: PMBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 236978175
          start       size  index  contents
              0          1         PMBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  236306352      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      236715992     262144      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      236978136          7        
      236978143         32         Sec GPT table
      236978175          1         Sec GPT header
    Jeremys-iMac:~ jeremygaster$ sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 14751/255/63 [236978176 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -  236978175] <Unknown ID>
    2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    Jeremys-iMac:~ jeremygaster$

  • Unable to install Itunes in Windows XP

    I am unable to Install Itunes oin Windows xp professional SP2, it gives below error: Let me know how to get it installed

    OK, there is still not much to go there.
    I assume you are using 32 bit XP Pro, iTunes will not install on 64 bit XP but you should get a different error.
    Lets try installing the components of iTunes separately.
    Download the iTunes installer and save it in your downloads folder.
    The files will be either itunessetup.exe or itunes64setup.exe for a 64 bit system.
    Open notepad and copy the following 3 lines into it.
    md temp
    itunes64setup /extract temp
    pause
    Remove 64 for 32 bit itunes.
    Save the file as extract.bat into the same folder that contains the itunes installer.
    Open the downloads folder and you should find the extract file that you saved. Double click on it and a black window will open telling you what it is doing. When its finished, press any key to continue.
    You should find that a folder called temp has been created containing all the itunes msi files.
    Install by double clicking on them  in this order:
    Apple Application Support
    Bonjour
    Apple Mobile Device Support
    Apple Software Update
    iTunes
    Make a note of any error messages and which component it relates to.
    Also use the Windows Event viewer to see if there are error messages at the time you attempted the installs.
    The following article gives information about using the Event Viewer:
    http://support.microsoft.com/kb/308427

  • Unable to install itunes in windows 7 64 bit - hanging

    Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
    Also i am unable to uninstall Apple update software. Are these both related.
    Now how do i get the software installed( itunes installed in windows 7)

    Hey gigipramod,
    Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195",public key token 1fc8b 3b 9a 1e 18e 3b",processorArchitecture="x86".Ple

    I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD

    I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
    I also found this in another post
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

    I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

    I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
    I also found this in another post
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • I am unable to install itunes for windows 7

    I am unable to install itunes for windows 7.I want to import audio material to my iphon4s from my lap top

    rashin wrote:
    I am unable to install itunes for windows 7
    Why not?  Should we guess at the issue or do you plan to provide details so that others can offer suggestions/solutions?

  • Unable to install ituns on windows 7 64 missing .dll file

    Unable to install ituns on windows 7 64. Installer states missing .dll file.

    Here is a solution that worked for a user who also had a problem with iTunes Software Support. This thread was for a win32 version, but Maybe this is the problem for both of you?:
    IT appears that AppleApplicationSupport.msi, is not opening and installing properly.
    Download and SAVE iTunesSetup.exe, where you can find it.
    Then:
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.
    Here is a link to that fairly lengthy thread.. http://discussions.info.apple.com/thread.jspa?threadID=2151777&tstart=-1

  • Unable to install Itunes on Windows 8

    Unable to install Itunes on Windows 8.
    It states Errors occured during installation. Your system has not been modified, and does not fully down load.
    I have tried :-
    Uninstall Itunes and then reinstall
    Uninstalled Itunes then connect Iphone to computer and tried to source relevant Itunes package.
    ininstalled Itunes then tried to install a later version
    Even tried an Itunes 64 bit installer then tried to download Itunes.
    All the above have been unsucessful. I have a 64 bit operationg system, x64 based processer laptop computer.
    I have spoken to the staff at apple store who were all really nice but could not offer any help unless I had an apple computer.
    Please help as I have two Iphones and an Ipad which are limited without Itunes.

    See Troubleshooting issues with iTunes for Windows updates.
    If you still have problems installing iTunes download and install 7-Zip (free) and a fresh copy of the current installer from https://www.apple.com/itunes/download/ or use these direct links (which will go out of date at some point):
    iTunes 11.1.5 for Windows (32-bit) - iTunesSetup.exe (2014-02-25)
    iTunes 11.1.5 for Windows (64-bit) - iTunes64Setup.exe (2014-02-25)
    Then unpack the installer into its components using 7-Zip and install them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). If any of the components still fail to install you may get more useful error messages as to why not.
    tt2

  • Unable to Install OBIEE on Windows 2008 Server R2

    I am Unable to Install OBIEE on Windows 2008 Server R2. It is giving the error
    Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
    But is there any patch to install the OBIEE on Windows 2008 Server R2

    Hi Sk
    I think it might be due to compatible issue.So check the properties of the install.exe file and change the compatability to windowsxp or windows 2003 ,then try to install .I think its going to work.Because i installed OBIEE10.1.3.4 on windows server 2008.
    Regards
    Sandy

  • After installing Mavericks my email isn't allowing me to draft a new message. I can see my messages, but cannot create a new message or reply to any messages. When I try nothing happens, then Mail freezes all together.

    I can see my messages, but cannot create a new message or reply to any messages.
    When I try nothing happens, then Mail freezes all together and usually crashes.
    I was able to get into my Mail settings and everything looks ok as far as I can tell.
    Has anyone else seen this? My software is completely up to date now (unfortunately).
    Thanks in advance for any help or advice.

    Do a backup.
    Quit Mail.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail.  Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Restart, re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis. Thanks to leonie for some information contained in this.
    https://discussions.apple.com/message/23609117#23609117

  • Windows 7 hangs when creating a new folder and hangs again when renaming it.

    Ok, so I have a problem where Windows 7 hangs when creating a new folder and hangs again when renaming it.
    I have documented this problem on my blog here:
    Windows 7 hangs when creating a new folder and hangs again when renaming it Rhyous's 127.0.0.1 or ::1
    This has my hardware details, etc...
    I consider myself an expert at troubleshooting (being in support for over 10 years including time as a Lead Technician doing Windows 2000 support focussing on performance), and have checked quite a few things to try to pinpoint this issue, but I just can't find the cause.
    I am asking others if they have seen this issue. I need to know if it is only on my workstation, or if others are seeing it as well.
    Have you ever right-clicked, chose new folder and then had to wait 45 seconds for a new folder to appear.
    Then the same thing when you try to rename the new folder, a hang of about 45 seconds before the new name take affect.
    Anyway, let me know if you have experienced ths.

    Hi,
    I suggest you temporarily uninstall the antivirus program to check the issue. You need to make sure that you have the installation file to reinstall it later.
    If it does not work, I suggest you also test the issue in Safe Mode and Clean Boot to determine if this is a hardware or a software issue.
    Good luck!
    Arthur Li - MSFT

  • Getting Error Msg  "usdsop cannot create a new process" in Log File

    Hi All,
    I have installed r12 in my personal LapTop.
    Every thing looks fine..
    For testing purpose, I have created a Shell Script and registered concurrent program.
    While i am running this program, program is getting error out with below message.
    D:\oracle\VIS\apps\apps_st\appl\po\12.0.0\bin\TEST_CONVERT.exe
    usdsop cannot create a new process
    Cause: usdsop encountered an error creating a new process. [Reason].
    Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
    Executing request completion options...
    Please help me in resolving this issue.
    Thanks
    Sandeep

    What is your OS?
    Did you complete the steps in these docs?
    How to Register a Host Concurrent Program in Applications [ID 156636.1]
    How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
    How Do You Run A Unix Host Script From Concurrent Managers On MS Windows Platform? [ID 412392.1]
    How To Setup A Custom Concurrent Host Program [ID 147455.1]
    Thanks,
    Hussein

  • Auto patch error usdsop cannot create a new process

    Hi i am applying hrms family pack k in one vision db in testnode but i am getting following error.Any idea
    appsversion 11.5.10 and windows 2003 advanced server
    Generating product JAR files in JAVA_TOP -
    j:\oracle\viscomn\java with command:
    adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @j:\oracle\visappl\admin\VIS\out\genjars.cmd
    Error:
    usdsop cannot create a new process
    Cause: usdsop encountered an error creating a new process. [Reason].
    Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
    Failed to generate product JAR files in JAVA_TOP -
    j:\oracle\viscomn\java.
    adogjf() Unable to generate jar files under JAVA_TOP
    AutoPatch error:
    Failed to generate the product JAR files
    rgds
    rajesh

    This is the primary reason I dislike doing Oracle Apps on Windows.
    If something bad happens while patching, and you find yourself without critical ad executables because relink failed, you need to run relinkenv.cmd to (re)create the APPS.SH unix-style environment (forward slashes) for relink.sh.
    Source or double click on envshell.cmd
    sh adrelink.sh force=y "ad adjava.exe"
    Backup Mode is "file"
    Removing Application products' bin directories from PATH ...
    Done removing Application products' bin directories from PATH
    Removing $FND_TOP/$APPLBIN from PATH ...
    sed: number in \[0-9] invalid
    Done removing $FND_TOP/$APPLBIN from PATH
    awk: adrelink.sh 4107: not found
    grep: adrelink.sh 4107: not found
    grep: adrelink.sh 4107: not found
    echo: adrelink.sh 4107: writing: The pipe is being closed.
    awk: adrelink.sh 4107: not found
    ORACLE RDBMS Version 8.0.6.0.0
    Oracle Reports Version 6.0
    Oracle Applications Release
    Unable to determine the release number.
    To resolve:
    type relinkenv.cmd
    This creates APPS.SH.
    Source or double click on envshell.cmd to create a new session.
    Now type sh
    At the command prompt, type . ./APPS.Sh
    now adrelink.sh force=y "ad adjava.exe"
    You are running adrelink, version 115.85
    Start of adrelink session
    Date/time is Fri Jul 20 20:22:35 PDT 2007
    Log file is d:/oracle/visappl/admin/log/adrelink.log
    Command line arguments are
    "force=y" "ad adjava.exe"
    Done with link of ad executable 'adjava.exe' on Fri Jul 20 20:27:07 PDT 2007
    Done relinking module adjava.exe in product ad
    Done with link of product 'ad' on Fri Jul 20 20:27:07 PDT 2007
    adrelink is exiting with status 0
    End of adrelink session

Maybe you are looking for