Unable to join two fact tables via one common dimension in RPD(Repository)

I have created two fact tables F1 & F2 and one dimension D.
F1 is joined to D and F2 is also joined to D in Physical layer as well as in BMM layer.
I created one report in OBI Answers using these three tables.It Showed me the following error.
**Error Details**
**Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P**
**State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table dfghdfh) does not contain mapping for [Dashboard_Fact.Period_Sgt_Key]. (HY000)**
**SQL Issued: SELECT dfghdfh.Period_Sgt_Key saw_0, "Period Dim".Period_Sgt_Key saw_1, Dashboard_Fact.Period_Sgt_Key saw_2 FROM service_delivery ORDER BY saw_0, saw_1, saw_2**
How to cope up with the issue or can anyone tell me the alternate workaround for this?

That is what i have tried.
I have made a logical table TEST and dragged two fact tables f1 & f2 in source.
Now when i drag different columns from different fact tables(that are in TEST logical table) in report, it gives an error and not making any joins that you are mentioning.
ERROR MESSAGE:--
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Test) does not contain mapping for [Test.SurveyName_Id, Test.SurveyHead_Id, Test.Respondent_Id, Test.SDBusiness_Area_Id, Test.Period_Sgt_Key, Test.OBS_Id, Test.VOCBusiness_Area_Id, Test.Question_Sgt_Key]. (HY000)
The columns mentioned in the error message are all from test logical table..some are from F1 & some from F2.

Similar Messages

Problem: two fact tables and one conformed dimension

Hi everyone!
I need to solve this situation:
I have two fact tables, let's say F1 and F2, that are both linked to D1, my conformed dimension
I just need to select fields from D1 but I know that, when querying, OBIEE links it to a fact table anyway..how does it choose the fact table? That is, if I only want fields from D1, does the system queries also from F1 or F2? Is it a random choice?
Is there a way to "force" this choice, telling the system for example to choose only from F1?
Is there a workaround to solve this situation? Remember, I only need fields from D1.
Thanks!!

The solution of your problem is "Implict Fact Column"
Go to presentation layer and double click on your subject area. then you will see Implict fact column option. click on set. give corresponding fact column there( in your case give F1 fact column)
references: http://oracle-bi.siebelunleashed.com/articles/implicit-fact-column/
Thanks
GSR
Edited by: GSR on Mar 20, 2012 3:22 PM

Joining two fact tables with different dimensions into single logical table

Hi Gurus,
I try to accomplish in Oracle Business Intelligence 11.1.1.3.0:
F1 (D1, D2 and D3)
F2 (D1 and D2 and D4)
And we want to build a report F1 F2 D1 D2 D3 D4 to have data for:
F1 that match only for D1-D2-D3
and data for
F2 that match only D1-D2-D4
all that in one row, so D3 and D4 are not common dimensions.
I can only do:
F3 (D1, D2)
F4 (D1, D2 and D4)
And report
F3 F4 D1,D2,D4 (all that in one row, and only D4 is not a common dimension)
Here is the very good example how to accomplish the scenario 1
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
But looks like it does not work in 11.1.1.3.0
I get
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 14025] No fact table exists at the requested level of detail: [,,Clients,,Day,ROI,,,,EW_Names,,,,,,,,,,,,,,,,,]. (HY000)
I am sure I set up everything correctly as advised in the blog but it works with only one not a common dimension
Is it a bug in 11.1.1.3.0 or something?
Thanks,
Kate

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

Something about two fact table in one subject

Hi all,
when I using two fact table in one subject, it can't make sense as expected.
The problem is describled as follows:
1.about the RPD:
In the presentation layer of Admin Tool, there is a mesure names "A", which is equal to B*C, come from table t1 and table t2 in logical layer respectively.
2. In biee Answeers, I created an answeer which includes some dimesions and the mesure A, another mesuare m1.
but in the the result pane, i saw there is no data in the the colume of mesure A, all other performs well.
3. so, I went for the NQquery for the phisical SQL, and found that,
in Where clause, table t2 is lost.
why? and how can I make it?

This sounds interesting. What would I join there? The dimension keys of the two fact tables?
Unfortunately this Logical Table Source stuff looks quite different in Admintool 11g. What would I need to create there?
Thanks,
Knut

Best way to connect two fact tables when no conformed dimension exists

Can anyone please elaborate how would I connect two fact table without any conformed dimension. Let say FACTA, FACTB. FACTB is related to a dimension "StatusDim". I want to select the count of all FACTA item which are related to FACTB items with
a particular status. I have found the following article but just wondering whether it is the best practise to connect two fact tables directly.
http://bifuture.blogspot.com/2011/11/ssas-selecting-facts-with-reference.html
Thank you

Hi Ahsan,
After read the blog you posted, I think it's a pretty good solution to create a view in the relational database or a named query in the Data Source View containing as the the columns in FACTA and FACTB. Then build a dimension from it, setting the "Null processing"
property (you have to click the "plus" two times for the "Key Columns" property of the attribute in BIDS to access this property) to "UnknownMember". And then use this dimension for the many-to-many relationship. Dimensions from FactA can benefit of the reference
relationship between FactA and FactB and therefore a powerful solution it is.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Join two fact tables

Hi,
I have two fact tables F1 and F2 joined with few dimensions D1.....D9. D1,D2 and D3 are conformed dimensions.
In Physical:
F1>--D1,D2,D3,D4,D5,D6
F2>--D1,D2,D3,D7,D8,D9
In Logical:
F1>--D1,D2,D3,D4,D5,D6
F2>--D1,D2,D3,D7,D8,D9
there are some ports already using above star schemas. now I got new requirements and I need to use measures from both the fact tables and conformed and unconformed dimensions.
I did the following in logical
F1 LTS GENERAL TAB ADDED F2,D1,D2,D3,D7,D8,D9 and in content tab set logical level to unconformed dimensions at total level and for conformed dimensios at details level.
F2 LTS GENERAL TAB ADDED F1,D1,D2,D3,D7,D8,D9 and in content tab set logical level to unconformed dimensions at total level and for conformed dimensios at details level.
but I'm still getting
[nQSError: 14026] Unable to navigate requested expression:
Please fix the metadata consistency warnings. (HY000)
I cheked metadata global consistency and no errors found.
Appreciate your help
Thanks
Jay.
Edited by: Jay on Sep 27, 2011 10:14 AM
Edited by: Jay on Sep 27, 2011 10:15 AM

Let me explain my issue again
In Physical:
F1>--D1,D2,D3,D4,D5,D6
F2>--D1,D7
In Logical: Single logical fact Fact_FY_Ratio has two logical sources
LTS1: F1>--D1,D2,D3,D4,D5,D6
LTS2: F2>--D1,D7
Set the content level for each LTS in Fact_FY_Ratio:
F1 to Detail for D1,D2,D3,D4,D5,D6 and to Total for D7
F2 to Detail for D1,D7 and to Total for D2,D3,D4,D5,D6
In LTS 1 general tab added inner joins with all dimensions F1,D1,D2,D3,D4,D5,D6,D7and F2
In LTS 2 general tab added inner joins with all dimensions F2,D1,D7,D2,D3,D4,D5,D6 and F1
And I also did logical complex join for Fact_FY_Ratio with all logical dimensions D1,D2,D3,D4,D5,D6,D7
I'm able to run query using D1,D2,D3,D4,D5,D7,F1,F2 but when I include D6(time dimension) it is causing problem with F2(witth F1 it is working fine).
query success with:
F1,D1,D2,D3,D4,D5,D6
F2,D1,D7
D1,D2,D3,D4,D5,D7,F1,F2
Query failed with:
F2>--D1,D7 and D6
Please let me know anything wrong with above configuration.
Thanks
Jay...
Edited by: Jay on Oct 3, 2011 7:11 AM

Joining two fact tables for subject area

When I tried to use two simple fact tables joined by a dimension, I am getting the “ No fact table exists at the requested level of detail” error in the answer when I try to pull the columns from Fact 1 and Fact 2 tables. I have set the content in both the fact table to lowest granularity of dimension with CUST_ID, RAT_ID, ACT_ID keys. We have one to many relationships between dimension and both the fact tables. Any feedback is highly cherished.
Fact1: keys are: CUST_ID, RAT_ID, ACT_ID, YEAR
Fields are CUST_ID, RAT_ID, ACT_ID, YEAR , Rev1, Transaction Date
Fact2: keys are: CUST_ID, RAT_ID, ACT_ID, YEAR
Fields are CUST_ID, RAT_ID, ACT_ID, YEAR , Rev2, CreationDate
Dimension keys are CUST_ID, RAT_ID, ACT_ID
Thanks,
uday

Hi LC,
We have to add two fact tables F1 AND F2 to an existing bmm. These fact tables have history tables F11 AND F22 and we have to use partition logic for this.How you did partition ? you should be using Fragmentation logic for that any how you will add the F11/F22 tables to F1 and F2 LTS , so when you join F1 & F2 to the common dimension then it should work for the calucluated measures but dont forgot to create hierarchies and specify the content levels for the fact tables
Thanks,
Saichand

Two fact tables in one business area

Hi,
Would there be problem if two fact tables, one flat, one with hierarchy, in one business area. Both fact tables are joined to same set of dimension tables except one: region_1 to fact_1, region_2 to fact_2. The consistency check is fine. But I get error in Answers. I don't have the exact error with me, but it is complains about fact_1 is not linked region_2.
Any suggestions ?
Thanks.

Thank you, Stijn, Ced for your kind reply.
I did not explain it clearly.
The fact_1 (flat) table has data in all levels (detailed and aggregated). For example, it has % sales to planned from city, state to national (we were not provided with numberator and demoninator to aggregate the detailed data). The fact_2 table has only city level data and have a dimension region_2 with city, state and national hierarchy. For data in Fact_1 table, we simply want to show them in reports. For data in Fact_2 table, reports can drill-down.
In Answers, the error is "Incorrectly defined logical table source ( for fact table Fact_1) does not contain mapping for region_2.state_id".

Joining two fact tables

Hi:
We have to add two fact tables F1 AND F2 to an existing bmm. These fact tables have history tables F11 AND F22 and we have to use partition logic for this.
We have multiple dimensions D1,D2,D3, D4,D5, D6, D7, D8.
We have common dimension table D1.
F1, F2 are joined to D1 on the item Id.
F1 should be joined to F2 on the Invoice Id.
We have calculated columns in F1 based on the columns in F2.
Please let me know the best way to build a bmm in this scenario.
Thanks,
LC

Hi LC,
We have to add two fact tables F1 AND F2 to an existing bmm. These fact tables have history tables F11 AND F22 and we have to use partition logic for this.How you did partition ? you should be using Fragmentation logic for that any how you will add the F11/F22 tables to F1 and F2 LTS , so when you join F1 & F2 to the common dimension then it should work for the calucluated measures but dont forgot to create hierarchies and specify the content levels for the fact tables
Thanks,
Saichand

Querying against two fact tables with non conformed dimension

I have two fact tables and I have this set up in RPD :
Fact1 joined to DimA and DimB
Fact2 joined to DimA
On Front end I build two analysis:
Analysis 1:
DimA.A, Fact1.1, Fact2.2
Analysis 2 :
DimA.A, DimB.B, Fact1.1, Fact2.2
In the results of Analysis 1 , I am seeing correct values for Fact2.2
In the results of Analysis 2, I am seeing Fact2.2 as empty column. I think the reason is that Fact2 is not joined to DIMB.
Is it possible that I should be able to report against both dimension tables (DIMA and DIMB) columns for FACT1 and FACT2 measures.... Even though I don't have join between DIMB and FACT2.
Any response would be helpful!!!
Regards,
Annu

Hi,
Go to the LTS-- Content Level of the fact which does not have join with Dimension and put Total level for that Dimension and total level on Column(Measure also)(Double click --Levels)(Assume Dim Hierarchy is already set up)
Pull everything(D1,D2,F1,F2) You will see results.
Update Me
Thanks
NK
Edited by: DNK on Mar 20, 2013 1:35 PM

Unable to join 3 fact tables in obiee data model.

Hi,
I am unable to join the 3 fact tables in obiee rpd. If I join with 2 fact tables I got the data in repors, Once I add the one more fact table and join with related dimensions, I am getting nodata error. I am following all joins keys as per datamodel, I am able to see the data in database. anyone pls give me the solution. Thanks in advance.
Edited by: 1007582 on May 23, 2013 2:17 AM

Can you please give some more detail as in what you have model in RPD;
For example, if There are 3 Fact table F1, F2, F3 and two Dimesion Confirmed_D1, Non_Conf_D2. Confirmed_D1 is joined to all three fact tables and Non_Conf_D2 is joined to F2.
Now to implement this model we have to set the logical content level in BMM layer for Non_Conf_D2 in F1 & F2 to Total*. After this only we can report on Confirmed_D1, Non_Conf_D2, F1, F2, F3 whithout any error.
Sometime join with multiple table can also result in No Data, since the join conditions filters out the result data.
Please mark helpful or correct.
Regards,
Kashinath

Re Joining two fact tables.

Hi Experts,
We have a requirement for a report to display columns from two different fact table.
We have a Order Table W_ORDER_D dimension table,a Order item table W_ORDERITEM_F fact table & a INVOICE table W_INVOICE_F fact table.
The requirent is that Order attribute information such as Order Id & order number is coming from the W_ORDER_D dimension table,The Quantity requested is coming from the W_ORDERITEM_F fact table & the Quantity Invoiced is coming from the W_INVOICE_F fact table.
When we display such a report the report is displaying the OrderID,ORDERNUM,Quantity Invoiced,but the Quantity requested is coming as blank.
and the following query is getting fired at the back end.
select distinct T536200.QTY as c1,
T31759.INTEGRATION_ID as c2,
T31759.ORDER_NUM as c3
from
W_ORDER_D T31759 / Dim_W_ORDER_D */ ,*
W_INVOICE_F T536200 / Fact_W_INVOICE_F */*
where ( T31759.ROW_WID = T536200.ORDER_WID and (T31759.ORDER_NUM in ('1-10016611', '1-10017512', '1-10019361')) ) )
if you go through the query it is not picking the W_ORDERITEM_F fact table,but there are joins dified in the RPD between the W_ORDER_D & W_ORDERITEM_F table & the W_ORDER_D & W_INVOICE_F TABLE.
Kindly suggest on the same.
Thanks & Regards,

Hi Goran,
Thanks for your response I've already set the Order Logical Level to Order Detail.
Actually we have imported a new table in the repository W_INVOICE_F & defined the relationships between Various dimensions.One of the Dim is Order.
My Question is that if Order is the common dimension between both the fact table W_ORDERITEM_F & W_INVOICE_F,then the Answers Result should display columns from both the Fact table based on the Concept of confirmed dimension..right??
Please let me know if any other setting is required to define a dimension as confirmed dimension??
We are using the Core business model
Thanks & Regards,

Joining two output tables in ONE table

Hi All,
I have 1 read query and 1 bapi... I need to show the output of these two into a table.
EXAMPLE:
Query returns 2 columns FIRST NAME and ID NUMBER.
Bapi returns   2 columns LAST NAME and ID NUMBER.
now table should show 3 columns like FIRST NAME.....LAST NAME...... ID NUMBER.
FIRST NAME is from Query....LAST NAME is from bapi.... where ID NUMBER is same.
Fname 1(from Query)           Lname 1 (from Bapi)               id 1(matching in both Query and Bapi)
Fname 2(from Query)           Lname 2 (from Bapi)               id 2(matching in both Query and Bapi)
In other words.... when ID NUMBER is same in query and bapi those record should come in single line.
Thanks,
PradeeP
Note: Right now I am using UNION operator which is showing both the results line by line....
USING UNION OPERATOR, RESULT IS.....
Fname1                                           id 1
Fname 2                                          id 2
                       Lname1                    id 1
                       Lanem2                     id 2
DESIRED RESULT...
Fname 1           Lname 1                id 1
Fname2            Lname 2               id 2
same question raised in forum union info from two datasources but no correct answers. its not possible in VC 7.1?????
I am thinking it is not possible after reading below threads.... please share your thoughts.....
Merging Two Tables from BAPI into single VC Table
union info from two datasources

Hi,
VC doesn't have a join operator, so it can't be done just with VC.
Instead, you should create a service that receives the 2 tables and performs the join, and consume the service in VC.
Best regards,
Tal.

Two FACT Tables, Some Common and Non-Common Dimensions

Hello all, a question i am sure you have faced in the past but still wanted to get your feedback.
I have a few FACT tables and some dimensions that are shared (common dimensions). Rest of the dimensions are related to one or the other FACT tables.
What is the best way to present a view where users can pull information from both the FACT tables?
I am successful in pulling the shared (common) dimensions across BOTH FACT tables having the same grain but this view breaks down when i pull information from one Dimension that has not much to do with the other FACT.
What is the best way to present this? Should this be broken in three subject areas?
Subject Area 1 --> Some Dims --> FACT Table A
Subject Area 2 --> Some Dims --> FACT Table B
AND
Subject Area 3 --> ***Only Common Dims*** --> FACT Table A & FACT Table B?
Your feedback is always appreciated.
Regards,
Edited by: user10679130 on Oct 12, 2009 3:27 PM

Please check the forum first for similar threads/questions.
Joining two fact tables with different dimensions into single logical table
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
This solution keeps both fact tables in the same subject area in the single logical fact table, with common and not-common dimensions.
Regards
Goran
http://108obiee.blogspot.com

How to link two fact table in OBIEE

i experts
1. I have one fact table EXCHANGE_FACT(Contains the exchange rate for each curruncy on each day) .
2. I Have anothe fact Table ACCOUNT_FACT(Contains Amount for each currency on each day).
Now i have to link these two table on bace of currency_key and time_key in OBIEE. so i have can i achieve it in OBIEE.
Regards
Frnds

Hi Frnds,
You should create two common dimensions (currency en time) and join each fact table seperately to these dimension. Create a demnsion (hierarchy) for each dimension.
Good Luck,
Daan Bakboord
Scamander Solutions

Unable to join two fact tables via one common dimension in RPD(Repository)

Similar Messages

Maybe you are looking for