Unable to lauch application after OS update

I have compiled and application somewhere, put a copy of the bundle into /Applications and everything worked well 3 months ago.
Made recent upgrades through software upgrade menu.
Now impossible to launch the applications by clicking on it in the /Applications directory.
But still possible to launch it from a shell window.
So destroyed then copied again the bundle, just to check it was the same files.
Same result, impossible to launch it from the finder.
What has happen with the last upgrade??

Hello,
Unfortunately, the very thing you state that you do not wish to do is actually the recommended course of action, given what you have described.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Unable to Log In After Software Update

Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warren

baltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren

TS3103 I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

Please see
https://discussions.apple.com/thread/4311280?tstart=0

Unable to download Application after iOS4 upgrade

I tried to download / update apps directly to iphone after upgrading to iOS4, but was prompted the message "Unable to Download Application.... will be available for download when you log in to the iTunes Store on your computer"
Anyone can help??

Most of the users with the updated iOS4 were suffering with the similar problem.
Only download via Wifi is OK, for 3G network, it prompts the same msg as u said.

I unable logon to application after upgrade to 11.1.1.2

Hi,
I have problem to logon to HFM application after upgrade from 9.3.1 version to 11.1.1.2.
The application is "Classic Application".
I upgraded SharedServices(HSS), Planning, AnaliticServices, Workspace and HFM. Everything is OK. I can logon to all components excluding HFM. Each component was configured and registred in HSS.
When I try logon to HFM application via workspace I recive this error:
An error has occured. Please contact your administrator.
Error Code: -2147217900
Details:
Trace: Error Reference Number: {A82694E0-72E7-4199-8EA4-B1BD52AD559C} Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:41:53;Svr: PGFDEMO;File: CHsxServerImpl.cpp;Line: 1877;Ver: 11.1.1.2.0.2207; Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:42:02;Svr: PGFDEMO;File: CHsxServerImpl.cpp;Line: 2168;Ver: 11.1.1.2.0.2207; Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:42:02;Svr: PGFDEMO;File: CHsxServerImpl.cpp;Line: 3886;Ver: 11.1.1.2.0.2207; Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:42:02;Svr: PGFDEMO;File: CHsxServer.cpp;Line: 1451;Ver: 11.1.1.2.0.2207; Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:42:02;Svr: PGFDEMO;File: CHsxClient.cpp;Line: 2355;Ver: 11.1.1.2.0.2207; Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:42:05;Svr: PGFDEMO;File: CHFMwManageApplications.cpp;Line: 206;Ver: 11.1.1.2.0.2207;
When I try logon via ClientConsole I recive this error:
Unable to open the selected application.
Details:
Error Reference Number: {19299643-9192-4E69-AC34-D1489457ED4A}
Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:45:03;Svr: PGFDEMO;File: CHsxServerImpl.cpp;Line: 1877;Ver: 11.1.1.2.0.2207;
Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:45:06;Svr: PGFDEMO;File: CHsxServerImpl.cpp;Line: 2168;Ver: 11.1.1.2.0.2207;
Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:45:06;Svr: PGFDEMO;File: CHsxServerImpl.cpp;Line: 3886;Ver: 11.1.1.2.0.2207;
Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:45:07;Svr: PGFDEMO;File: CHsxServer.cpp;Line: 1451;Ver: 11.1.1.2.0.2207;
Num: 0x80040e14;Type: 0;DTime: 2009-09-09 12:45:08;Svr: PGFDEMO;File: CHsxClient.cpp;Line: 2355;Ver: 11.1.1.2.0.2207;
In system Evet Viewr/Application I have next error:
Event Type: Error
Event Source: Hyperion Financial Management
Event Category: None
Event ID: 11
Date: 2009-09-09
Time: 12:45:01
User: PGFDEMO\Administrator
Computer: PGFDEMO
Description:
Error 11; Administrator; 09/09/2009 12:45:01; CHsvSQLFile.cpp; Line 836; <?xml version="1.0"?>
<EStr><Ref>{B3E02DEC-686C-4370-9E10-B63DE76601E9}</Ref><AppName>EMEA</AppName><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147217900</Num><Type>1</Type><DTime>2009-09-09 12:45:01</DTime><Svr>PGFDEMO</Svr><File>CHsvSQLFile.cpp</File><Line>836</Line><Ver>11.1.1.2.0.2207</Ver><DStr>SELECT LABEL,TIMESTAMP,BINARYFILE,TYPE FROM EMEA_BINARYFILES WHERE LABEL = N'SharedAppData' order by ENTRYIDX</DStr><PSec><Param>ORA-00904: "TYPE": niepoprawny identyfikator</Param></PSec></ESec></EStr>
But when I create new ClassicApplication then I can logon.
Has anyone any idea how to resolve my problem?
Thanks for help.

Hi there,
interested to know if this was resolved and how? I am also receiving a similar message after running an upgrade/schema migration.
Appreciated any assistance you can provide

I am unable to save screenshot after black update

Hello Admin,
I am unable to take screenshot after updating black release.
Last night I have updated my Lumia 720 with Black release afterwards I'm unable to take the screenshot.
I am getting the error like "couldn't take screenshot".
Please help me out with this problem.
I am following the conventional way to take screenshot like "lock key + start key".
Thanking you in advance.
Phone Model: Nokia Lumia 720
Updated with Black Release
Solved!
Go to Solution.

Yeah!! Its related to problem with folders on MMC. It happens when you share MMC or unplug phone un-safely from PC.
You can solve problem on memory card by formatting it. Do remember to take backup. Then insert MMC in phone. Let phone create folders, then copy back data.
You can try short cut, by deleting folder called pictures. But at times it doesn't work.
Cheers!

Creative Cloud not showing applications after recent update

Creative Cloud is no longer showing any applications after the recent update. I have rebooted and still nothing.
I am using Windows 7 x64.

Hi m3w_pokemon,
When you launch CC desktop are the panels blank. If yes then navigate to C/users/User name/Appdata/Local/Adobe/OOBE/opm.db and trash it.
Sign in with your Adobe id and the apps shoud be visible.
Regards,
Romit Sinha

Unable to download apps after iOS7 update

Hi,
After updating my iPad 3 to iOS 7, I can't download any apps from the app store. I've tried signing out and in from the app store but it did not work. Could this be a bug after the update?
Thanks

Apple's servers have been swamped since yesterday's release of iOS 7. Even the iTunes Store is/was showing signs of oddness with your apps needing updates not showing at all or when finally downloading the update, would stall and just sit there. All you can do is keep trying. Hopefully things will ease off today and into tomorrow.

Unable to run Office applications after auto update

My PC has just had a Windows update which took several hours to complete and I am now unable to run any MS Office applications - help anyone!

Hi, Both Windows and Office are products from Microsoft. Please try: http://support.hp.com/au-en/document/c03933792 or https://support.microsoft.com/en-us/gp/windows-update-issues/en-us Good luck.

Unable to connect VPN after OS update

hi, I recently updated my MacBook Pro to OS 10.9.2 and since then have been unable to stay logged into VPN for more than 5 mins. after about 5 mins, it freezes and I have to log out and restart the machine

Hello,
Unfortunately, the very thing you state that you do not wish to do is actually the recommended course of action, given what you have described.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Spotlight doesn't find application after AppStore update

This started happening with Type2Phone, an app from Houdah Software. Every time after I would update the app via the AppStore, Spotlight would no longer find the app (I use Spotlight for app launching). I contacted the developer, and following a series of steps, we found that what is happening is that somehow the updated app is having this attribute added to it:
kMDItemSupportFileType = ( MDSystemFile )
[This is the output of the mdls command]
This explains why Spotlight is no longer finding the app.
Now logically, he informed me that this command should remove the attribute:
sudo xattr -d com.apple.metadata:kMDItemSupportFileType /Applications/Type2Phone.app
But although the command executes, it doesn't remove the attribute! I.e.
mdls /Applications/Type2Phone.app/ | grep MDSystemFile
Still has " MDSystemFile" as output.
I've run Disk Utility to check for directory damage, rebuilt permissions, etc. to no avail. The only solution is to rebuild the Spotlight index completely -- but the problem will recur with a new update.
Although it inexplicably only happened every time I updated Type2Phone, now it's happening when I update Tweetbot.
Any insights into this problem which is driving me batty?

Try contacting apple on the chat now option

Unable to open application after system hang-up and power down

Help!! System hung up while working on CS2 photoshop file, I had to power off. Upon restart my dock had changed and deleted some icons..not a problem. When I tried to open Photoshop again, initial screen came up, tool palette blinked and it went right back off. All other programs are fine. After several tries I finally trashed Photoshop and reloaded it. Same problem! Adobe support had me create new user account and try to open...that worked fine. They said something is wrong in user account and to call Apple. Is this something that can be fixed or is the solution to create a new admin account and delete the old one?
Thanks for any help in advance.
Rlsewalt
G4 Mac OS X (10.3.9)

Try turning off Xsecurity using:
# ./tarantella config edit --security-xsecurity 0
and let us know if this resolves your issue or not.
Suraj Jadhav wrote:
Hello,
I have Tarantella installed on Fedora Core 2.
I am accessing the WebTop from Windows XP machine. After logging in with
Administrator account when I click on kedit nothing happens so I clicked
on show details and I found below log. I really dont know what this
means...could some one help me in resolving this issue.
Thanks & Regards
Suraj Jadhav
Starting the application...
Connecting to Protocol Engine...
Initialising ...
Logging in to the application server...
root@weboffice's password:
Last login: Sun Oct 30 15:45:33 2005 from weboffice
]0;root@weboffice:~[root@weboffice root]# exec /bin/sh
sh-2.05b# [ -f /bin/ksh ] && exec /bin/ksh
Configuring your environment...
# set o emacs ; set o gmacs ; set +o vi
# LD_LIBRARY_PATH=/usr/lib; export LD_LIBRARY_PATH
# ALTDISPLAY=weboffice:11; export ALTDISPLAY
# TTA_UID="`LANG=C LC_ALL=C id | sed 's/.*uid=\([0-9][0-9]*\).*/\1/'`";
export TTA_UID
# TTA_USERNAME='.../_ens/o=Tarantella System Objects/cn=Administrator';
export TTA_USERNAME
# TTA_PRIMARY_DNSNAME='weboffice'; export TTA_PRIMARY_DNSNAME
# TTA_PE_ID=''; export TTA_PE_ID
# TTA_CLIENT_IPADDR='172.17.2.81'; export TTA_CLIENT_IPADDR
# TERM=''; export TERM
# TTA_PEERDNSNAME='weboffice'; export TTA_PEERDNSNAME
# TTA_EXTDNSNAME='weboffice'; export TTA_EXTDNSNAME
# if [ -f /etc/ttaprinter.conf ]; then . /etc/ttaprinter.conf; export
LPDEST; fi
Starting the application...
# if [ -x /usr/bin/konsole ]; then echo "Found"; else echo "Not
available"; fi
Found
Xlib: connection to "localhost:10.0" refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key
konsole: cannot connect to X server localhost:10.0
Connection to weboffice closed.

Unable to change preferences after Security Update 2006-007 10.3.9 ppc

Problem: System Preferences are locked and cannot be unlocked. And Software Update, and Disk Utility would launch but not work following installation of the S.U. 2006-007 .
Solution Steps: 1) Turn off airport card, 2) Connect using ethernet, 3) restart, 4) download S.U. 2006-007 and reinstall. 4) restart 5) disconnect ethernet and turn airport card on.
I believe these steps will work. I did alot of other stuff before trying this and it seems to be working. If you really want to know all of what I tried then read on. Otherwise I would just try the above.
The key seems to be that the airport card is turned off and you are connected to the internet via ethernet so you can download and install the file.
THE LONG STORY:
After using software update to install S.U. 2006-007
I was restarting and it to me to a black BSD login screen. I was not sure of the user name and password it was asking for so I ended up restarting by holding in the power button.
I reset the PRam and was able to get it to load but it listed the user at the top of the screen as UNKNOWN and would not let me see my alternate logins. I restarted again an this time it came up with my name.
Fearing problems I went to the disk utilities to check the permissions. It opened the disk utilities and as it was gathering information it suddenly quit disk utilities without any warnings.
I restarted in single user mode and used /sbin/fsck -fy twice and it found no problems and I restarted. It would still not let me do the disk utilities with the same results as above.
I went into my system preferences and my user settings were marked as locked and would not unlock even though I was logged in as the admin user.
I restarted and reset the power managment. Again I could not change the acounts preferences because it would not let me unlock them. My time was also messed up now and it would not let me unlock them.
I tried changing the passwords using the install disk and that did not work.
I also tried using disk utilities from the install disk. It checked the disk fine and found no problems but gave an error while trying to check the permissions.
I restarted and tried to software update the latest itunes and it would not let me install.
I am not sure why but I tried turning off my airport card and restarting. I was now able to change my preferences and do a disk utilities permissions repair {no problems found}.
I turned my airport card back on and once again my preferences were locked and so I turned the card off and the preferences stayed locked. I restarted several times playing with this and it appears that every time the airport card is turned on it locks the preferences and must be restarted with it off to allow access.
I tried logging in as a new user and had the same results.
I finally turned off the card and connected via ethernet and it had no problems unless the airport card was turned on. I redownloaded the S.U. 2006-007 and reinstalled it and it appears to work fine.
I was never connected wih the airport card and ethernet at the same time.
Ibook G4-800 Mac OS X (10.3.9)

In the "never fails" category . . . went back onto the machine and signed on under a different account. Immediately got the the familiar Keychain dialog asking for permission for AirPort, responded yes, and the base station was suddenly visible to this account. Logged off, back in under the original account, got the same Keychain request (which had NEVER appeared before in 5 or 6 different logins) and was off and running again.

Conflicting Application after Software Update

Hey guys, I have downloaded picasa on my nokia 303 through Nokia store and while i was checking this app , suddenly a window pop up asking to update the software. When i update it ; my nokia browser is showing 'conflicting app'.when i click on it ,it shows nokia xpress. I have restore setting and hard restore , but nothing happens. Help me . . . ! !
Moderator's Note: The subject was amended.

hi mate,
answered your question here: http://discussions.nokia.com/t5/Phone-Applications/Conflicting-apps/td-p/1806400
Moderator's Note: The subject was amended.

Unable to boot up after driver update on X200 - please help!!

When I boot up now my screen goes to "Windows XP," then hangs on a blank blue screen (not BSD) - won't go any further. Scoured other forums and have not found a solution - tried:
1. Disabling VT-d in BIOS
2. Loading defaults in BIOS
3, boot into diagnostics from BIOS
4. Removed primary battery *have not yet tried removing backup battery)
How do I boot windows XP in safe mode using this computer?
Also tried F11 *disk doctor" - it would not launch.
This all happened as I was configuring my system today for the first time (relatively new system) and performed many driver updates - did this one by one and things were going fine. Then, I discovered the ThinkPad System Update package - installed this and then it scanned automatically for driver updates - I did three at once (I think one was finger print reader drive, one AMT 4.2, and the other some Microsoft hotfix) - after this, no starting up. I know there's a BIOS update to do (3.11 - I have 3.10) and I have created the boot CD for this though don;t have my base station/CD with me so I have to wait to try this until tomorrow.
Any ideas? Please help - this is insane, and I am kicking myself as I knew I should have kept doing these one by one and I also need a good imaging program to create images after each successful update so I could just roll back on an unsuccessful one - is there a "SuperDuper!" imaging program for Windows ("SuperDuper! Is the one I use for Mac)?
Thank you.

Nvidia's official site. I don't know if I am allowed to send links on this site so I am not going to do that.
Anyway, I tried to contacted the apple on 16'th and just got a response a few minutes ago.Unfortunately then I had to reinstall my mountain lion all over again by recovery. Well, I lost many stuff but 'Hey! Mountain Lion got much faster for some reason so, I'm not complaining.
Thank you for your reply.

Unable to lauch application after OS update

Similar Messages

Maybe you are looking for