Unable to load Database Error for one of the BSO Application.

Hello Everyone,
We have one Production Issue like suddenly the an Application Fiji while should be running was stopped. When i tried to restart it its showing Error.
gvw3086-v.atlanta.hp.com:1423.Fiji    Start  application    August 28, 2013 8:32:24 PM SGT    Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038]
gvw3086-v.atlanta.hp.com:1423.Fiji.Consol    Start database    August 28, 2013 8:33:30 PM SGT    Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038].
I checked the Log but not sure it correct or not i see this Error message.
[Wed Aug 28 11:33:48 2013]Local/Fiji///7944/Info(1002089)
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
But i also saw this error before but the application use to start automatically but this time it did not.
can anyone help me on this.
Regards,
Naveen

Hi,
As i mentioned above its only for one Application Fiji. For a temporary Solution we tried to restart the Hyperion Services. But this did not work. One of the the Hyperion Service HyPService(not sure of the exact name). did not restart. So we have done a a fail over to other node and now the Fiji apps is running. But i don't think so what we have done is the correct fix for the solution. Have any one faced this problem.
Hi John,
Which Doc ID you mean to refer me is that the doc which comes with the Essbase Software.
Regards,
Naveen

Similar Messages

  • Open project was cancelled or the application was unable to load database error

    Good morning,
    I am currently on RoboHelp, version 8.0.2.208 and last week my laptop (XP OS) crashed. My IT department ran a repair disk program and since that time I receive the error message in the subject line when I attempt to open any XPJ file. We use RoboSource Control 3.1. I can access/see all of our projects when I go through RoboSource Control 3.1 Explorer. I have already uninstalled/reinstalled the Adobe Tech Communication Suite twice. I think my next move is to have our IT staff wipe my disk clean if I can't solve this problem in the next day or so. Appreciate any advice/feedback anyone has. Kind regards.

    This morning a coworker got the same error message. He had been working on his RH8 project yesterday with no problems. He was unaware of any changes to his PC, but our IT dept may have pushed some kind of update. To reproduce the error on my PC, I made a copy of an RH8 project and renamed the .cpd file. When I tried to open the .xpj, I received the same error. When I restored the .cpd file name, I continued getting the error--not only on that project, but also on ALL OTHER PROJECTS! (Unfortunately, I didn't try to open the project before renaming the file--and hadn't used RH at all today--so there may have been a problem for me even before I started to break things, and that might indicate an overnight PC update.)
    I tried several solutions (including deleting the .cpd and .xpj files, then trying to open the .hhp in RH8, as suggested on other sites). No luck. Then I attempted to create a new project (File>New>Project>Blank Project), but RH8 created only a handful of files in the new project folder, then stopped, without creating an .xpj and most other critical files.
    Since I also have RH5 installed on my PC, I created a new project in RH5, then converted it by opening the RH5 .xpj file in RH8. After RH8 converted the new project to the RH8 format, I was able to open the "corrupt" project in RH8, as well as all the other projects!
    The manifestation of the problem in all of my projects seems to indicate that there was a corruption in the RH8 application, not in the .cpd file. The app just needed to be "unstuck," then everything was OK. Nothing in the project had been lost at all.
    Since my coworker does not have RH5 installed, he was able to fix his situation by simply creating a new project in RH8.

  • 1002097 Unable to load database [Plan1]

    Hi all,
    I am not able to start the database from essbase. When i start the databse from app, I am getting below message from the panel.
    server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:27 PM CAT     Failed
    Error: 1002097 Unable to load database [Plan1]
    Error: 1042015 Network error: Cannot Locate Connect Information For []
    server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:36 PM CAT     Failed
    Error: 1053001 Cannot open object file: C:\Hyperion\products\Essbase\EssbaseServer\app\XXXXAPP\Plan1\Plan1.esm
    server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:36 PM CAT     Failed
    Error: 1053001 Cannot open object file: C:\Hyperion\products\Essbase\EssbaseServer\app\XXXXAPP\Plan1\Plan1.esm
    server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:40 PM CAT     Failed
    Error: 1002097 Unable to load database [Plan1]
    I tried deleting the app from essbase and create it from planning (through refreh/create) that is also giving me a olap planning exception "Unable to load database"
    I can not open forms as well. it is giving me "Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator"
    Any Help..?
    Thanks !
    Edited by: user8819264 on Apr 5, 2011 7:52 AM
    Edited by: user8819264 on Apr 5, 2011 8:27 AM

    Hi John,
    Sry for the delayed reply. The issue was the same as you suggested. There were few esssvr processes running. I couldnt see that from the taskmanager i as was looking on the process that were running with the user i logged in. I could see all once i selected checkbox from "All users". Killed those services and now it is fine.
    Thanks.

  • "Error 1002097 Unable to Load database" while starting an Essbase App.

    Hello Essbase Experts,
    I am getting below error while starting an Essbase Application:
    "Error 1002097 Unable to Load database"
    Below is an extract from the Essbase Application Log:
    [2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
    [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
    delay.
    [2012-04-04T14:14:04.821-19:14] [RPA] [ESM-5] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
    [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure other processes do not
    access Essbase files while Essbase server is running.
    [2012-04-04T14:14:04.821-19:14] [RPA] [MBR-89] [WARNING] [1][] [ecid:1333566842161,0] [tid:2058170128] Unable to open
    [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for database
    [RPA][2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
    [ecid:1333566842161,0] [tid:2058170128] Unable to load database [RPA]
    [2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
    [ecid:1333566842161,0] [tid:2058170128] Unable to load database []
    [2012-04-04T14:14:04.835-19:14] [RPA] [SVR-97] [ERROR] [32][]
    [ecid:1333566842161,0] [tid:2058170128] Unable to load database []
    Please sugest pointers to start the application.
    Thanks,
    KK

    *[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file*
    Solution would be easy ...like if the Essbase Agent is stopped using the services.msc (services panal)on Windows while a process is currently running, or if there has been an abnormal termination of the Essbase Agent, orphaned ESSSVR processes can be left. Shuting down the Essbase server using ESSCMD or MaxL then Check Task Manager confirm the ESSBASE.exe process later by this ESSSVR.exe processes should end if still NO then Do an "End Process" on any ESSSVR.exe process that is still running. Start the Essbase service and start the application.
    ESSSVR.exe is process which keep application Alive (bad thing is if u have many applications running similarlly u have same numbe of ESSSVr .exe will be running in task master ..but u cant find out which one belongs to which application :( )
    Reasons
    looking at your error i can say , First of all you need to know what is Lock in EAS ? and what locks exist
    (right-click on Essbase Servername, EDIT->LOCK and EDIT->LOCKED OBJECTS, and if your database/outline appears in there, unlock it.)
    Check any antivirus- and backup software that may be scanning / running on your Essbase folders as that can lock the files and any ESSSVR process stays when the Essbase Agent is stopped
    More over another chance of getting error is when you have you page and index files in different location and rest otl, rep.csc script in another drive .. usually while taking back up in OTL,csc drive u do get created index file and page file even u have page and index file in diffrent drive so doe to this u get this error unable to load database
    Hope this give u some idea

  • Error: Unable to Load Database

    Anyone seen this error: "Unable to Load Database"? How to recover? A link or a page for me to read would work too. thx! James

    The usual cause for this is that the database has become corrupted - or one or more key files was somehow deleted. Take a look at the application log and see if there is a more detailed message. Unfortunately, if the data has been corrupted, you will have to recover from backup, or rebuild your cube.To get the database started, you can go into the database directory and delete the *.ind, *.pag, *.tct, *.ind and *.esm files. This will allow the app to start, but the data will be GONE - you will HAVE to reload and calc it, or restore from backup.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • Essbase Error Error: 1002097 Unable to load database

    Hi,
    I am using essbase 7.1. I am having a problem when I am trying to run any calc start application or database or doing anything Essbase give me an Error: 1002097 Unable to load database. I restart essbase services but nothing happen. Any help would be great.
    Thank you,

    I am currently getting the same error, it happens randomly on different models each day at around the same time. I have found this error on the log for one model.
    Unable To Find Or Open [e:\Program_Files\Hyperion\Essbase\bin\APP\LAdPBurn\LAdPBurn\ess00011.pag]
    I think the data files are locked by something, I am checking with our server team to see when the backups run as there are no other processes running at this time in Essbase. Incidentally the model has 15 .pag files.

  • Project Error: Open project was canceled or RoboHelp was unable to load database

    Hi,
    I checked an HTMLHelp project out of SourceOff Site (SOS),
    then attempted to open it locally with RoboHelp 5 when I got the
    error message: "Open project was cancelled or RoboHelp was unable
    to load database."
    I found the TechNote for this error message (rb_3245) which
    said to delete the .xpj and .cpd files, then right-click the HHP
    file and click Edit to open the project. This worked fine for
    opening the project, however the Primary Layout Source defaulted to
    WebHelp. I reset the Primary Layout Source to HTMLHelp which caused
    all of the graphics in the project to not display. I fixed this
    issue, compiled the Help, and all appeared to be fixed. I checked
    the project back into SOS to back it up. This morning, I checked it
    out of SOS and tried to open the project locally again, only to get
    the same error. I closed the project, undid the check-out, and
    asked another writer to check-out the project then open it locally
    to see if he got the same error. He did not get the error.
    I am not sure what could be wrong on my computer that is
    causing this error. I had no problems opening and using this
    project until yesterday and I made no file name or path changes to
    the project. Any ideas on what may be wrong?

    Welcome to the forum.
    The message is usually easily dealt with. I haven't checked
    the article as you didn't include a link but I'm guessing it
    involved deleting a couple of files and then using the HHP file to
    open the project.
    What is more worrying is that you cannot create a new
    project.
    Have you tried opening one of the supplied sample files?
    Are your projects stored locally and not on a network?
    Have IT given you a new profile to log on with?
    Has anything else changed in your environment?

  • "open project was cancelled or the application was unable to load database for..."

    I'm doing a project for my Professional Writing course and I
    have to use RoboHelp to create an online help document. The
    professor provided templates for us to use but when I go to open
    the project file I get the following error: "open project was
    cancelled or the application was unable to load database
    for....(then the directory)"
    I know the project file isn't corrupted because the members
    of my class are using the same one without issue. I tried
    re-downloading the file, I also re-installed the program itself,
    still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
    The only other suggestions I have seen are that I don't have
    edit perms for the system, but it's my personal laptop and I have
    full admin privs. I thought at first that the folder was read-only,
    but when I opened it up all it displays is the little green box in
    the checkbox (which doesn't mean the folder is read-only, it's just
    some stupid windows default, it's only read-only if the box is
    actually checked). I tried making the entire directory read-only
    and then turn it off but still get the same error.
    Any suggestions?

    There's a topic on my site about Opening Projects that
    includes the method of deleting the CPD and XPJ files but I didn't
    cover that as the project is good for everyone else. Anything is
    worth a try at the moment though.
    Another thing to try is to rename the course folder, then
    create a new folder with the same name plus all sub folders. Then
    move the files across. That will ensure the folder properties are
    good and not read only. Yes I know what you said but again anything
    is worth a try.
    Also, in the last post you are saying the directory is not
    read-only. I assume the files are all good?
    Ref my previous post, is it the case that now you are getting
    an error before the original error would have popped up?

  • Open project was cancelled or application was unable to load database for pathname

    My pc is installed with Robohelp 3x. Recently I shifted the
    pc from one room to anther. Now when I attempt to open my existing
    workable solution, it give me the following message: "Open project
    was canceled or application was unable to load database for
    <pathname>". Do I need to call for Robohelp technical
    support? If yes, can someone provide me the toll free number?
    Can someone pls advise?

    Thanks Peter, managed to get in through the link you've
    given. I seriously doubt it has anything gotta do with a corrupted
    project. I have 2 working projects last week but they can no longer
    be opened this week.
    I tried even to created an empty project from scratch. It was
    created successfully but when I reopen the project, it shows the
    same error message.
    Could there have been other possibilities or ways which I can
    troubleshoot?
    *puzzled*

  • Error: 1002097 Unable to load database in Essbase 11.1.2.2

    Hi All,
    I am getting error like Error: 1002097 Unable to load database when I tried to load an application using MAxl. We have installed 11.1.2.2 version newly and till yester all the process was working fine. I was able to run some automation batch scripts on the essbase application. Sudden Application stops responding. I am able to load the sample application which are come with the essbase. But, only my test application is not working fine.
    I have tried Essbase server restart. But, no luck. Could any one suggest what might be the reason and how to debug.
    Thanks
    Sri

    Hi Sri,
    Please look into the below forum.. Hope it might help you...
    Ref: https://kr.forums.oracle.com/forums/thread.jspa?threadID=874484
    Sol 2:
    Ref: http://www.network54.com/Forum/58296/thread/1185858760/Unable+to+Load+Database
    The best solution I have found so far is to stop the application and delete or rename all .ind, .pag, .esm and .tct files for the troubled database and restart the application.
    It will create these files from scratch and you can load your data.
    Note: Please take the necessary backup before trying..
    Thanks

  • Hyperion Essbase Error: 1002097 Unable to load database [PlanType1]

    Hello,
    I am running Hyperion Essbase 9.2.0.3 version. This has happened 3 times now since last 2 weeks. I had to restore the APP folder from previous backup.
    The message that i see is Error: 1002097 Unable to load database [PlanType1]
    I have searched google and no luck. Anyone knows how to fix this or why we get this message. I don't want to restore from backup everytime.
    Thanks
    Azmat Bhatti

    I think you have currepted backup.
    Try run essmsh script to recover broken block's.
    Backups - Files still locked after beginarchive

  • Error --1002097 Unable to load database

    Hi,
    Essbase version 7.
    I am having a problem when I am trying to start database or running Essbase give me an Error: 1002097 Unable to load database.(error 1002097 is related to the db corrupt.) this is on PRD server.
    we have 2 more server ,(.BS & Dev).
    1.I copied the Db from the BS to PRD --- but the application and DB in the PRD system failed to start giving the same error 1002097 .
    2.next i did was to migrated the same application from BS to Dev system which went fine and i can see the outline . Application is getting started in the DEV system .
    3. Since it was okay in DEV. i migrated the application from BS TO PRD .it got migrated but it is not starting giving me the same error 1002097.
    any help will be great.
    thanks
    ram
    Thank you,

    Re: How can we Restore a corrupted cube.

  • Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

    I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
    The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
    The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

    Hi,
    For your issue, check your current language settings and ensure that search supports the current language.
    On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter). 
    Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
    Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
    Updated the registry entry with NATURA~1.dll to NATURA~2.dll
    Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
    Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
    For more detailed information, refer to the following blogs:
    http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
    http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Error: ORA-16778: redo transport error for one or more databases

    Hi all
    I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
    Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
    but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
    Please help me how can i resolve this issue .Thanks in advance.
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect sys
    Password:
    Connected.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database
    show database
    ^
    Syntax error before or at "end-of-line"
    DGMGRL> remove configuration
    Warning: ORA-16620: one or more databases could not be contacted for a delete operation
    Removed configuration
    DGMGRL> exit
    [oracle@PRIM ~]$ connect sys/sys@prim as sysdba
    bash: connect: command not found
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 08-OCT-2006 19:52:48
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PRIM_DGMGRLL" has 1 instance(s).
    Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect /
    Connected.
    DGMGRL> create configuration test as
    primary database is PRIM
    connect identifier is PRIM
    ;Configuration "test" created with primary database "prim"
    DGMGRL> add database STAN as
    connect identifier is STAN
    maintained as physical;Database "stan" added
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: NO
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    DISABLED
    DGMGRL> enable configuration
    Enabled.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database verbose prim
    Database
    Name: prim
    Role: PRIMARY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    PRIM
    Properties:
    InitialConnectIdentifier = 'prim'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'PRIM'
    SidName = 'PRIM'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "prim":
    Error: ORA-16778: redo transport error for one or more databases
    DGMGRL> show database verbose stan
    Database
    Name: stan
    Role: PHYSICAL STANDBY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    STAN
    Properties:
    InitialConnectIdentifier = 'stan'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'STAND'
    SidName = 'STAN'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    DGMGRL>

    This:
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    says that your network setup is not correct. You need to resolve that first.
    As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
    It's 3 DGMGRL commands so I am not sure what 'steps' you need?
    Larry

  • Error: ORA-16778: redo transport error for one or more databases.   please help.

    Hello everyone :
    I can't switchover to primary. following is error and information.
    RHEL 6.3 x86-64
    Oracle database 11.2.0.3.0 Enterprise edition
    Primary database = orclprmy
    Standby database = orclstby1
    ##### /etc/hosts on orclstby1
    [root@orclstby1 admin]# cat /etc/hosts
    127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
    ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
    192.168.50.211    ttprmy
    192.168.50.212    orclstby1
    ### DG broker error
    DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
    Copyright (c) 2000, 2009, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    Connected.
    DGMGRL> show configuration;
    Configuration - TTDGConfig1
      Protection Mode: MaxPerformance
      Databases:
        orclstby1 - Primary database
          Error: ORA-16778: redo transport error for one or more databases
        orclprmy  - Physical standby database
    Fast-Start Failover: DISABLED
    Configuration Status:
    ERROR
    DGMGRL>
    ########### listener.ora on orclstby1
    [root@orclstby1 admin]# cat listener.ora
    # listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME=orcl)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1_DGMGRL)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    ADR_BASE_LISTENER = /u2/oracle
    ############## tnsnames.ora on orclstby1
    ORCL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
    orclprmy =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
    orclprmy_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
    orclstby1 =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
    orclstby1_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
    ##### alert log on orclstby1.
    Fatal NI connect error 12504, connecting to:
    (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
      VERSION INFORMATION:
            TNS for Linux: Version 11.2.0.3.0 - Production
            TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
      Time: 06-SEP-2013 13:19:55
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12564
    TNS-12564: TNS:connection refused
        ns secondary err code: 0
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    There is problem  in alert log.
    In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
    Is any idea?
    Thanks for help.
    消息编辑者为：user4914135

    #### on primary database
    SQL>  select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
    LOG_ARCHIVE_DEST_2   VALID     REMOTE  LGWR       PENDING  ALL_LOGFILES    PRIMARY_ROLE orclstby1
    LOG_ARCHIVE_DEST_3   INACTIVE  LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
    #### on standby database
    SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
    LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING  ONLINE_LOGFILE  PRIMARY_ROLE orclprmy
    ORA-12504: TNS:listener was not given the SERVICE_NAME in
    CONNECT_DATA
    LOG_ARCHIVE_DEST_3   INACTIVE  PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE 
    ####  log_archive_dest on primary database  
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclprmy
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                     NOAFFIRM delay=0 optional comp
                                                     ression=disable max_failure=0
                                                     max_connections=1 reopen=300 d
                                                     b_unique_name="orclstby1" net_ti
                                                     meout=30, valid_for=(all_logfi
                                                     les,primary_role)
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    ####  log_archive_dest on standby database
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclstby1
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                     =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                      db_unique_name=orclprmy
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    log_archive_dest_23                  string
    log_archive_dest_24                  string
    log_archive_dest_25                  string
    #### spfile on standby database
    </u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
    orcl.__db_cache_size=1040187392
    orclstby1.__db_cache_size=1090519040
    orcl.__java_pool_size=16777216
    orclstby1.__java_pool_size=16777216
    orcl.__large_pool_size=16777216
    orclstby1.__large_pool_size=16777216
    orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orcl.__pga_aggregate_target=536870912
    orclstby1.__pga_aggregate_target=536870912
    orcl.__sga_target=1610612736
    orclstby1.__sga_target=161061273
    orcl.__shared_io_pool_size=0
    orclstby1.__shared_io_pool_size=0
    orcl.__shared_pool_size=503316480
    orclstby1.__shared_pool_size=469762048
    orcl.__streams_pool_size=16777216
    orclstby1.__streams_pool_size=0
    *.archive_lag_target=0
    *.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_nam
    e_convert='orcl','orclstby1'
    *.db_name='orcl'
    *.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
    *.db_recovery_file_dest_size=5218762752
    *.db_unique_name='orclstby1'
    *.deferred_segment_creation=FALSE
    *.dg_broker_start=TRUE
    *.diagnostic_dest='/u2/oracle'
    *.fal_client='orclstby1'
    *.fal_server='orclprmy'
    *.log_archive_config='dg_config=(orclprmy,orclstby1)'
    *.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
    *.log_archive_dest_2='ser
    vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
    *.log_archive_dest_state_2='ENABLE'
    orcl.log_archive_format='orcl_%t_%s_%r.arc'
    *.log_archive_format='orclstby1_%t_%s_%r.arc'
    orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
    *.log_archive_max_processes=4
    *.log_archive_min_succeed_dest=1
    orcl.log_archive_trace=0
    orclstby1.log_archive_trace=0
    *.log_file_name_convert='orcl','orclstby1'
    *.open_cursors=300
    *.pga_aggregate_target=536870912
    *.processes=
    1500
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sessions=1655
    *.sga_target=1610612736
    *.standby_file_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    </u2/oracle/product/11.2.0/dbhome_1/dbs>
    Thank you for your help.

Maybe you are looking for

  • Partial data loading from dso to cube

    Dear All, I am loading the data from dso to the cube through DTP. The problem is that some records are getting added  through data packet 1 to the cube around 50 crore records while through data packet2 records are not getting added. It is full load

  • How to remove Print pdf link below the reports?

    How to remove print pdf(only pdf. i need html) report which is available below the reports? I am not asking to remove it from the print icon at the left bottom of the page. I need it to be deleted from the link in the middle of the page below the rep

  • Not able to use scratch disc

    I am using a pc laptop with window 7 and an IMAC with Lion. I saved the project on a seagate portable drive. I can see the timeline and raw footage. When I open the sequence, I get the above information. I can go back and link the video and all is go

  • Hard drive suddenly not showing up

    Hi. I have a 1.5ghz 17" PB with 1GB of RAM. I got it in June '04. Today, I attempted to wake it from sleep after having used it all morning. I typed in my password, and then the box went grey and didn't respond for long time. I force-restarted, and w

  • Web Service Task in SSIS 2012

    Hello, I have a web service task that worked fine prior to upgrading from SQL Server 2005, but in 2012 fails with an error saying the "wsdl file is invalid".  I am using the same wsdl file as I was using in 2005.  Connectivity tests for the web servi