Unable to load gpib-32.dll when running the visual basic 2008 program
I installed NI-488.2 into my PC, window 7 64 bit OS.
In the program >> project> add reference>.NET, I successfully add the NI.4882 into my visual basic program.
By the way, this program worked well in another window 7 32 bit PC.
But when I run the program at ildev(BDINDEX,.........), error comes up as "unable load DLL gpib-32.dll".
So when I looked at c:\windows\system32, I can not fine gpib-32.dll.
Doesn't NI-488.2 driver install gpib-32.dll?
How can I install gpib-32.dll?
SeongCho wrote:
Nyc, thank you for your reply.
By the way, I think I did all the link explained.
So I have no problem in adding NI488.2 to my program's reference using "add reference".
The problem is GPIB statement like ildev() looks for "gpib-32.dll".
But there was no gpib-32.dll installed in "c:\windows\system32" so error comes up with "unable to load gpib-32.dll".
I did the same procedure in my another PC(window 7 32 bit OS,my current PC is window 7 64 bit OS), and in that PC I can see the gpib-32.dll in that directory and program run without problem.
I do not know how gpib-32.dll was installed in my previous PC.
Thanks
Seong
Have you looked at the example programs for .NET that install with NI-488.2?
You need to start thinking in terms of .NET
Similar Messages
-
When I try to run NI's Sample VB programs I get the following error, Unable to find gpib-32.dll.
Tried to reference gpib-32.dll but VB says unable to reference gpib-32.dll. Software: Win95, NI488.2 (ver 2.6) Hardware: GPIB-PCIIA
NI-488.2 version 2.6 is written for DOS/WIN 16 operating systems. You may want to remove that driver and install NI-488.2 version 1.6 or 1.7 instead. Here is a link to the download site: http://digital.ni.com/softlib.nsf/websearch/E10418C4F6CFDCC186256BA600644D77?opendocument&node=132060_US
Heather S.
Applications Engineer
National Instruments -
"I replaced the GPIB-32.dll file dated 1/26/98 with one dated 7/29/99 in order to fix the "cannot load gpib-32.dll" error. Now I can register it, but I get the error "c:\windows\gpib-32.dll was loaded but the DLLRegisterServer entry point was not found. DLLRegisterServer may not be exported, or a corrupt version of c:\windows\gpib-32.dll may be in memory. Consider using Pview to detect and remove it. When I attempt to run my application windows crashes, but returns after hitting enter."
Chris,
For information concerning language interfaces and GPIB go to the following path:
ni.com>>resource library>>gpib>>programming>>language interfaces
Best Regards,
Chris D -
Unable to load null status:404 when replying in Verizon webmail
Unable to load null status:404 when replying in Verizon webmail. Error appears in its own window. It seems to be related to MIME-encoded incoming messages. I can open a new message window and copy/paste the reply-message into the new message and then send it without the error. Trying to save-as-draft also gives the same error message. This is recent after update to V.31 of Firefox on Win7(Sp1).
Hey guys,
It looks like that the issue has been resolved on the site, can you please try to send and email and confirm this change. There was a bug filed and fixed this week in version 32?
You make have to clear the cache for the site to see the changes. Thank you! -
Error in the Informatica when running the DAC load( Prebuilt Analytics)
Hi All,
Please help me with the below issue with the informatica i am getting when running the DAC load:
Below are the details:
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST(F0006.MCRP10 AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST(F0006.MCRP14 AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST(F0006.MCRP01 AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST(F0006.MCRP15 AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST(F06.MCRP16 AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,---------------------------Table name should be F0006
CAST(F0006.MCRP12 AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST(F0006.MCRP27 AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST(F0006.MCRP03 AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST(F0006.MCRP23 AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST(F0006.MCRP24 AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST(F0006.MCRP12 AS CHAR(10)) AS STATE_REGION,
CAST(F0006.MCRP04 AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
As mentioned in the SQL the table name should be F0006 instead F06, I have checked the Source Qualifier transformation and below is the SQL issued
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST($$FLEX_ATTRIB_1_CHAR AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST($$FLEX_ATTRIB_2_CHAR AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST($$FLEX_ATTRIB_3_CHAR AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST($$FLEX_ATTRIB_4_CHAR AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST($$FLEX_ATTRIB_5_CHAR AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST($$FLEX_ATTRIB_6_CHAR AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST($$FLEX_ATTRIB_7_CHAR AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST($$FLEX_ATTRIB_8_CHAR AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST($$FLEX_ATTRIB_9_CHAR AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST($$FLEX_ATTRIB_10_CHAR AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,
CAST($$FLEX_ATTRIB_11_CHAR AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST($$FLEX_ATTRIB_12_CHAR AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST($$FLEX_ATTRIB_13_CHAR AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST($$FLEX_ATTRIB_14_CHAR AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST($$FLEX_ATTRIB_15_CHAR AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST($$FLEX_ATTRIB_16_CHAR AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST($$FLEX_ATTRIB_17_CHAR AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST($$FLEX_ATTRIB_18_CHAR AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST($$FLEX_ATTRIB_19_CHAR AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST($$FLEX_ATTRIB_20_CHAR AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST($$STATE_REGION AS CHAR(10)) AS STATE_REGION,
CAST($$COUNTRY_REGION AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
The error code and error message in the workflow monitor says:
Message Code: VAR_27028
Message: Use override value [F06.MCRP16] for mapping parameter:[mplt_BC_SDE_JDE_InternalOrganization_BusinessUnits.$$FLEX_ATTRIB_10_CHAR].
Some how it is overridng all the values so please let me know what i can do.
Thanks in AdvanceOracle Support
-
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
Is a copy of the CFNetwork file available for download if mine is corrupted?
Thanksget an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error message when running the FSPCCURR - PS/Fin MultiCurrency Process
error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks. -
Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.
This is a problem that suddenly appeared.Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?
I'd ask that on the iPad forum.
-
How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0
Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan -
My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
Core dump when running the Proc Application
I have client that has decided to upgrade from Oracle 10g to Oracle11g version. Presently the client code is compiled with Oracle version 11.1.0.7. We have tuxedo version as 9.0 patch02. When running the ProC application, I am getting the core dump. The stack trace for dump is as follows :-
core 'core' of 7784: bp_Customer -C dom=KenanFX -g 5 -i 225 -u dsesun10 -U /users/denver/pc
ffffffff6e8d9bbc kill (2, ffffffff7ffe002c, 1, ffffffff7de3b9a0, ffffffff7ffe0028, ffffffff7e10b5a0) + 8
ffffffff7d27b1f4 skgesigCrash (ffffffff7ffe09a8, ffffffff7e10a070, 1a0c00, ffffffff7dfdbc40, d60a7c, 1) + 34
ffffffff7d27b81c skgesig_sigactionHandler (ffffffff7d6fb9a0, ffffffff7ffe1800, ffffffff7ffe0990, ffffffff7e10b578, ffffffff7ffe0998, ffffffff7ffe09a8) + dc
ffffffff6e8d62e0 __sighndlr (b, ffffffff7ffe1800, ffffffff7ffe1520, ffffffff7d27b740, 0, a) + c
ffffffff6e8c9e44 call_user_handler (ffffffff75f00200, ffffffff75f00200, ffffffff7ffe1520, 8, 0, 0) + 3e0
ffffffff6e8ca03c sigacthandler (0, ffffffff7ffe1800, ffffffff7ffe1520, ffffffff75f00200, 0, ffffffff6ea3c000) + 54
--- called from signal handler with signal 0 (SIGEXIT) ---
ffffffff7c24bb24 sqlrlc (ffffffff7e0f9fc0, 0, 60, c0, 4, 8) + 4
ffffffff7c253594 sqlbrl (ffffffff7e0f9fc0, 1004bc630, 1004bc658, 1004bc5d0, ffffffff7ffe1b30, 2) + 114
ffffffff7c2745ec sqlhvdsc (1004bc5c0, ffffffff7e0f9fc0, 8, ffffffff7fff27a0, 0, 1d676b0) + ac
ffffffff7c274e68 sqlshv (c, 0, e, 0, f, 1c) + 128
ffffffff7c25bd8c sqlsel (ffffffff7fff27a0, 1002d0850, 1002d0d80, 1, ffffffff7e0f9fc0, ffffffff7dd09d70) + 38c
ffffffff7c24ed18 sqlcmex (1, ffffffff7ffe1e80, 0, c, 1002d0850, 0) + 278
ffffffff7c24f724 sqlcxt (0, ffffffff74fd3800, ffffffff7fff27a0, ffffffff74e5d3e4, 16400, 0) + 44
ffffffff74c65aec selectCMF_XIDDB (788, 16450, 2, ffffffff74fbb978, ffffffff7fff4344, ffffffff7971de60) + f14
ffffffff79f5743c bp_AccountFind (0, 0, 1002b6118, 1002b6118, 1002b6118, 1002b6118) + 137c
000000010001748c commonServiceWrapper (30, 0, 558, 1, 100140428, ffffffff6fa08560) + cac
000000010001d1a4 I_AccountFind (100188220, 12336c, 2e60, 100186b80, ffffffff7fffa440, ffffffff6fa08560) + ec
ffffffff7f25ea34 _tmsvcdsp (100186b80, 0, 1001f7b60, 800, 100186b80, 1400) + 11ac
ffffffff7f28241c _tmrunserver (2bb4, 0, 100186b80, 10017c480, 10017d5a0, 0) + 11ac
ffffffff7f25d47c _tmstartserver (1, 2c00, 100144c90, 800, 10017ebe0, 1001444e0) + 1ac
0000000100014e4c main (1b, ffffffff7fffab18, ffffffff7fffabf8, ffffffff6e84b8e0, ffffffff75b05200, ffffffff75f00200) + 14
0000000100014d9c _start (0, 0, 0, 0, 0, 0) + 17c
Can you please help what is causing problem in the applications. Thanks in advanced.
This forum is about C programming in general, and about using Oracle Studio C in particular.
Your question seems to be about a database application that now crashes when run on an updated version of Oracle database.
You mention "Proc" and ProC". If you are referring to the Pro*C compiler, that would also be a database question, since the Pro*C compiler is not related to Oracle Studio or Oracle Studio C.
You are more likely to find a helpful answer in a database programming forum. Start here:
https://forums.oracle.com/forums/category.jspa?categoryID=18
When was the last time a program was run?
Experts, is there a way to know when was the last time a program was run (particularly, Z Program). We are trying to identify obsolete programs and avoid working on those programs that weren't touched for more than 3 years during our next upgrade. How can I find this? Any suggestion would be highly appreciated.
Thank you.
Hi,
One way is to check TRDIR table(se11/se16) and display it. In the next screen once you will get 'Data Browser Table TRDIR' selection screen. There either you put the individual 'Z' program name in the 'Name' field & execute it or for all multiple entries execute it.
Once you execute it with the particular Z prog. name then you will get the required details like CDAT(Created on),UNAM(Last changed by),UDAT(Changed On),SDATE(Standard selection screen generation: Date),IDATE(Selection screen generation: Date) etc.
Hope this can help you.
RE: my input fields does not display when running the page
my input fields does not display when running the page
why is that so?
Hi,
Can you send the HTML code for us?
Afonso
Maybe you are looking for
-
Question related to FILE SENDER handling of recordsets
Hi We have a File->RFC SAP scenario We are reading files using FTP File adapter. Splitting messages 100 messages per recordset. QOS is EXACTLY ONCE! If we have a huge file - lets say 100.000 records. The adapter starts reading and gets to 50.000th re
-
Macbook Pro water damaged, have I lost my purchased apps?
A drink got spilt onto my Macbook Pro the other night, for enough time to soak into the keyboard and I'm guessing damaging the internal harddrive. Unfortunately nothing was backed up but the good news is I have accidental damage insurance. Is there a
-
I have read many of the past messages on stacks and the inability to apply changes/ratings to all images within a stack at the same time. Let me explain what I'm doing and why this is frustrating. In many of my shoots I'm bracketing every shot. I tak
-
Dear, For complexType element in the complexType, can not generate the UI field automatically, just wrote a simple type can be generated in BPM. Thank's Regrads Hito
-
Llevo un tiempo en que se agota la batería en poco tiempo. He visto que el uso y reposo tiene los mismos tiempos. He quitado los pusch y el segundo plano, pero sigue igual. También he restaurado el teléfono , pero nada. Alguien me puede orientar. Gra