Unable to load LabVIEW VI into TestStand using LV Run Time only
I'm unable to load some of my VIs into TestStand from LabVIEW. I am using:
TestStand 4.2.1
LabVIEW 2010
I have the appropriate patches installed for both TestStand and LabVIEW, and I still get the error.
Attached is a message that I get when I hover over the "!" to explain my error. The VI has the "Simple Error Handler.vi" as part of the build, and when I eliminate this VI from my VI, TestStand then loads correctly.
Thanks,
Eric
Solved!
Go to Solution.
Attachments:
TestStand_LoadError_Hover.png 16 KB
This fixed my issue as well. Thank you for posting this. I have repaired LabVIEW 2010 sp1, LabVIEW FPGA, LabVIEW RT, DAQmx, and VISA 5.0. These are not small programs to do repairs on. Even after doing all of these repairs I still had issues with just labview coming up.
Just by clicking on my lv shortcut to run the labview.exe I would get a loading screen for gws_int.vi This was before opening any projects or VI's. Labview was having many issues. Once the loading vi screen went away the standard labview 2010 startup page was present. But this page was dysfunctional. For example if you clicked tools and then options it would just totally crash LabVIEW, no error message or warning.
Many people are suggesting to mass compile to fix this, but that is not an option. If you went to tools>advance>mass compile the same loading vi screen would come up (pic A), but then the mass compile program would have a broken arrow (pic b) I included a image to show people this.
The error list will always pop up, but there are no errors.
I called NI tech support and they suggested that I repair all of my programs starting with the largest programs first. During the repairs I found this forum. I have over 30 different NI modules installed on this machine, I would have been at this for the next two days.
Thank you very much for this.
A good question is why didn't the repairs of these large programs find this, and would any repair of any module have fixed this?
Attachments:
b.png 116 KB
a.png 46 KB
Similar Messages
-
Unable to load the data into Cube Using DTP in the quality system
Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
SatyaprasadHi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad -
"unable to load labview project" in Deployment Machine
Hi all,
well the Deployment Target works fine on Development machine
But has problem Loading on the Deployment System "unable to load labview project"
has anyone had similar issues and ound a soln.
NI Support has not responded yet to the solution.
Attachments:
unabletoload.PNG 17 KBHi aparab,
I think I will need more information to solve this issue.
You told "NI Support has not responded yet to the solution." Do you already have a service request number of the NI support?
Can you post your project? Which RT-target do you use? Which hardware?
You can also post a MAX report of you windows computer and one of your target:
1. Start -> Programs -> NI MAX
2. File -> create protocol -> choose technical support and my system (development computer) -> next -> next -> choose path -> next -> finish.
3. File -> create protocol -> choose technical support and your RT-target (real-time system) -> next -> next -> choose path -> next -> finish.
Best regards
Suse
Certified LabVIEW Developer (CLD) -
Unable to load LabVIEW RT from drive
Trying to boot RT on PXI-8187 controller with original setup, what ever RT boot selection is used either hardware switch or BIOS RT boot option, the terminal will show the following:
Unable to load LabVIEW RT from drive!
Booting safe mode from ROM...
mount: Mounting /dev/Ma1 on /home/ftp/c failed: Invalid argument
Entering safe mode.
IP address is: 0.0.0.0
Of course after that you can't do any thing to configure the RT target from the MAX on the host computer.
Please Help.Hi,
I used the recovery CD to change the file system to NTFS, it took a while and it installed windows XP from scratch differently from FirstWare that ghosts it (I think). And it didn't install any NI stuff what so ever.
At the end I got the same result as with using the remote system format disk option.
i.e. The RT controller boots in safe mode displaying the previous message without the mount error but this time I can configure the IP address.
Still I can't install software to it, I get the list of features to install, I select them and press next, then I get a dialog saying:
Cannot process install because other dependencies are required:
LabVIEW RT 1.0.1
LabVIEW RT 6.0.1
LabVIEW RT 6.1.0
LabVIEW RT 7.0.0
LabVIEW RT 7.1
Is this a host or RT Controller issue now?
What's next? Thanks for the help -
Can we load and unload the files in the run time?
Can we load and unload the files in the run time?
For example there are four files named "test1.h & test1.c" and another set "test2.h & test2.c" (I attached them as attachment to this post).
test1.h contains code:
int variable; //variable declared as integer
test1.c contains code:
variable = 1; //variable assigned a value
test1.h contains code:
char *variable; //variable declared as string
test1.c contains code:
variable = "EXAMPLE"; //variable assigned a string
So here, in this case can I dynamically load / unload the first & second group of files so that the same variable name "variable" can be used both as integer and string? And if yes, how is that to be done?
Solved!
Go to Solution.
Attachments:
test.zip 1 KBWhat do you mean by "dynamically"?
If you want to have a variable that either is an int or a char in the same program run, I'm afraid your only option is to define it as a variant and assign from time to time the proper data type in the variant according to some condition. Next, every time you access the variable you must firstly check which data type is stored in it, next access it in the proper way.
If on the other hand your option or to have a run in which the variable is an int, next you stop the program and in a following run it is a char, you may have it by using some appropriade preprocessor clause:
#ifdef CHAR_TYPE
#include "test1.h"; // variable defined as a char
#else
#include "test2.h"; // variable defined as int
#endif
Next, every time you want to access the variable you must proceed in the same vay:
#ifdef CHAR_TYPE
variable = "string";
#else
variable = 1;
#endif
Does it worth the effort?
Additionally, keep in mind that this "dynamical" approach can work only in the IDE, where you can properly #define your CHAR_TYPE or not depending on your wishes: when you compile the program, it will have only one #include depending on the definition of the macro.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Unable to load data in to table using sqlloader
Hi,
Oracle Version :10.2.0.1
Operating system:windows Xp
I was unable to load the data in to table from csv file .Can any one please help me .
Here is the output of my log file
SQL*Loader: Release 10.2.0.1.0 - Production on Thu Jun 3 12:43:22 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: ach_staging.ctl
Data File: E:\SQL LOADER\ACH_STAGING.csv
Bad File: E:\SQL LOADER\load_bad.bad
Discard File: E:\SQl LOADER\emp.dsc
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table ACH_STAGING, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
ACH_CODE FIRST * , O(") CHARACTER
LOAN_CODE NEXT * , O(") CHARACTER
LOAN_TYPE NEXT * , O(") CHARACTER
TRAN_ID NEXT * , O(") CHARACTER
BO_CODE NEXT * , O(") CHARACTER
BO_NAME NEXT * , O(") CHARACTER
ST_CODE NEXT * , O(") CHARACTER
ACH_TYPE NEXT * , O(") CHARACTER
ACH_EFFECTIVE_DATE NEXT * , O(") CHARACTER
AMT NEXT * , O(") CHARACTER
CHECK_ACCNT_NO NEXT * , O(") CHARACTER
ABA_CODE NEXT * , O(") CHARACTER
ACH_STATUS NEXT * , O(") CHARACTER
TRAN_STATUS NEXT * , O(") CHARACTER
IS_HOLD NEXT * , O(") CHARACTER
IS_CANCELLED NEXT * , O(") CHARACTER
COMMENTS NEXT * , O(") CHARACTER
UPDATED_BY NEXT * , O(") CHARACTER
DATE_UPDATED NEXT * , O(") CHARACTER
CREATED_BY NEXT * , O(") CHARACTER
DATE_CREATED NEXT * , O(") CHARACTER
LOAN_TRAN_CODE NEXT * , O(") CHARACTER
ACH_AUTH NEXT * , O(") CHARACTER
REBATE_AMT NEXT * , O(") CHARACTER
PROMOTION_AMT NEXT * , O(") CHARACTER
TDC_ACH_NO NEXT * , O(") CHARACTER
INST_NUM NEXT * , O(") CHARACTER
DISABLE_ACH NEXT * , O(") CHARACTER
STMT_NO NEXT * , O(") CHARACTER
NEW_LOAN_TRAN_CODE NEXT * , O(") CHARACTER
REVOKED_BY NEXT * , O(") CHARACTER
REVOKED_DATE NEXT * , O(") CHARACTER
CHECK_STATUS NEXT * , O(") CHARACTER
value used for ROWS parameter changed from 64 to 30
Record 1: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 2: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 3: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 4: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 5: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 6: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 7: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 8: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 9: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 10: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 11: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 12: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 13: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 14: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 15: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 16: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 17: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 18: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 19: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 20: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 21: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 22: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 23: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 24: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 25: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 26: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 27: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 28: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 29: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 30: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 31: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 32: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 33: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 34: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 35: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 36: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 37: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 38: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 39: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 40: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 41: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 42: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 43: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 44: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 45: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 46: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 47: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 48: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 49: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 50: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
Record 51: Rejected - Error on table ACH_STAGING, column ACH_EFFECTIVE_DATE.
ORA-01830: date format picture ends before converting entire input string
MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
Table ACH_STAGING:
0 Rows successfully loaded.
51 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 255420 bytes(30 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 60
Total logical records rejected: 51
Total logical records discarded: 0
Run began on Thu Jun 03 12:43:22 2010
Run ended on Thu Jun 03 12:43:23 2010
Elapsed time was: 00:00:00.17
CPU time was: 00:00:00.10
{code}
and the data from the CSV file is
{code}
1767641 7537506 ILP ADV 506703 MICHELLE WHITE -40 CRE 07-NOV-08 01.36.04.000000000 PM 650 INP PRO N N 54564 06-NOV-08 06.06.28.000000000 PM 54562 06-NOV-08 01.36.04.000000000 PM 2060997 PPD 0 0 0 N 1 ACH
1767642 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 01-DEC-08 12.00.00.000000000 AM 76.5 INP PRO N N Updated During EOD PAY : ACH 1 28-NOV-08 09.00.17.000000000 PM 54562 06-NOV-08 01.36.04.000000000 PM 2061201 PPD 0 0 1 N 1 ACH
1767643 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 16-DEC-08 12.00.00.000000000 AM 76.5 INP PRO N N Updated During EOD PAY : ACH 1 15-DEC-08 09.00.16.000000000 PM 54562 06-NOV-08 01.36.04.000000000 PM 2061614 PPD 0 0 2 N 1 ACH
1767644 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 02-JAN-09 12.00.00.000000000 AM 76.5 INP PRO N N Updated During EOD PAY : ACH 1 31-DEC-08 09.00.55.000000000 PM 54562 06-NOV-08 01.36.04.000000000 PM 2063375 PPD 0 0 3 N 1 ACH
1767645 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 16-JAN-09 12.00.00.000000000 AM 76.5 INP PRO N N Updated During EOD PAY : ACH 1 15-JAN-09 09.01.10.000000000 PM 54562 06-NOV-08 01.36.04.000000000 PM 2064023 PPD 0 0 4 N 1 ACH
1767646 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 02-FEB-09 12.00.00.000000000 AM 76.5 INP PRO N N Updated During EOD PAY : ACH 1 30-JAN-09 09.00.22.000000000 PM 54562 06-NOV-08 01.36.04.000000000 PM 2064639 PPD 0 0 5 N 1 ACH
1767647 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 17-FEB-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 6 N 1 ACH
1767648 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 02-MAR-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 7 N 1 ACH
1767649 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 16-MAR-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 8 N 1 ACH
1767650 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 01-APR-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 9 N 1 ACH
1767651 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 16-APR-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 10 N 1 ACH
1767652 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 01-MAY-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 11 N 1 ACH
1767653 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 18-MAY-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 12 N 1 ACH
1767654 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 01-JUN-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 13 N 1 ACH
1767655 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 16-JUN-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 14 N 1 ACH
1767656 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 01-JUL-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 15 N 1 ACH
1767657 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 16-JUL-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 16 N 1 ACH
1767658 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 03-AUG-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 17 N 1 ACH
1767659 7537506 ILP PAY 506703 MICHELLE WHITE -40 DEB 17-AUG-09 12.00.00.000000000 AM 76.5 NOP NOP N Y Cancelled during Payment By -> BUY : ACH 54605 13-FEB-09 09.03.23.000000000 AM 54562 06-NOV-08 01.36.04.000000000 PM 1778544 PPD 0 0 18 N 1 ACH
{CODE}
Thanks & Regards,
Poorna Prasad.Hi,
At last i was able to insert the data into the table but here i am facing another problem i the csv file i am having some null values in the data because of that only few records was inserted and remaining data was not inserted.
Here is the syntax what i am using to insert even null values are present
ACH_EFFECTIVE_DATE "to_timestamp(:ACH_EFFECTIVE_DATE,'DD-MON-RR HH.MI.SSXFF AM')" NULLIF ACH_EFFECTIVE_DATE=BLANKSand the error what i am getting is
E:\SQL LOADER>sqlldr userid=rr/rr control=ach_staging.ctl log=ss1.log
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Jun 4 12:24:32 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-350: Syntax error at line 16.
Expecting "," or ")", found keyword nullif.
EFFECTIVE_DATE,'DD-MON-RR HH.MI.SSXFF AM')" NULLIF ACH_EFFECTIVE_DATE=
^
{code}
can any one please help me what is the correct syntax i need to user here .
Thanks & Regards,
Poorna Prasad. -
Unable to load TIF images into Photoshop.
CS4 (11.0.2) and Windows 7 Home Edition.
Have developed a problem trying to load some TIF images into Photoshop. I have a large number of images archived over a decade or more. At this point it may some of the older files that exhibit the problem. Now all these files were edited and stored using the Photoshop versions during the complete time period. The files are always saved with no compression. Have tried to load from Photoshop and clicking on the file in a file list. Photoshop just hangs and I get the message Program not responding. I can take these same files and load them into the ROXIO photo editor with no problem. Stranger yet is if I simply load the file into the ROXIO editor then "save as" back into the same folder (overwrite) the file can then be brought into Photoshop with no problem! Any ideas?Noel,
Will try to keep short.
I reinstalled Photoshop CS4 from the cd CS set. Did not uninstall first. Restarted PC and Photoshop. Still failed the same way with a 3001 image.
Did the following, changing one item in the Edit->Preference->GPU Setting. After each change, closed Photoshop, reopened, brought in 3001 image, restored original setting. 3001 failed each time.
* Unchecked Enable OpenGL Drawing
* Advanced setup: Unchecked Advanced Drawing.
* Advanced setup: Unchecked Color Matching
Next went to the Edit->Color Profile.
Scanned thru options and saw in the Convert Options: Engine. It was set to Adobe (ACE). ACE was the module name in the error detail!
Only other option for this is Microsoft ICM. Changed to that, close/open Photoshop and 3001 came in no problem. So did the Nikon 3000, srgb IEC 61922 2.1 and Untagged. However, when briging in an Adobe RGB(1998) image Photoshop notes Profile Mismatch. It allows me to decide what to do (use embedded profile instead of workspace; convert color to work space color; discard embedded profile. and I choose use the convert color and it loads ok. At least it loads the image! Will use this approach for now. I need to get educated on color profiles!!
Joe -
Unable to load the data into HFM
Hello,
We created new HFM app configured that with FDM, generated output file through FDM and loaded that file through HFM directly 5-6 times, there was no issue till here.
Then I loaded the file through FDM 4 times successfully, even for different months. But, after 4 loads I start getting Error. Attached is the error log .
Please help us earliest..
** Begin fdmFM11XG6A Runtime Error Log Entry [2013-10-30-13:44:26] **
Error:
Code............-2147217873
Description.....System.Runtime.InteropServices.COMException (0x80040E2F): Exception from HRESULT: 0x80040E2F
at HSVCDATALOADLib.HsvcDataLoadClass.Load(String bstrClientFilename, String bstrClientLogFileName)
at fdmFM11XG6A.clsFMAdapter.fDBLoad(String strLoadFile, String strErrFile, String& strDelimiter, Int16& intMethod, Boolean& blnAccumFile, Boolean& blnHasShare, Int16& intMode)
Procedure.......clsHPDataManipulation.fDBLoad
Component.......E:\Opt\Shared\Apps\Hyperion\Install\Oracle\Middleware\EPMSystem11R1\products\FinancialDataQuality\SharedComponents\FM11X-G6-A_1016\AdapterComponents\fdmFM11XG6A\fdmFM11XG6A.dll
Version.........1116
Identification:
User............fdmadmin
Computer Name...EMSHALGADHYFD02
FINANCIAL MANAGEMENT Connection:
App Name........
Cluster Name....
Domain............
Connect Status.... Connection Open
Thanks,'
RaamWe are working with the DB team but they have confirmed that they is no issue with the TB, the process we have followed
As a standard process – while loading the data from FDM or manually to HFM – we don’t write any SQL query. Using the web interface – data would be loaded to HFM application. This data can we viewed by different reporting tools (smart view(excel)/HFR Report/etc.)
There is no any official documents on oracle website which talk about Insert SQL query which is used to insert data to HFM tables. Even, Hyperion does not provide much details on its internal tables used. Hyperion does not provide much insight on internal structure of HFM system.
As per Hyperion blogs/forums on internet –HFM stores the base level data in so called DCE tables (for example EMHFMFinal _DCE_1_2013 where EMHFMFinal is application name, 1 identifies the Scenario and 2013 the Year). Each row in the DCE table contains data for all periods of a given combination of dimensions (also called an intersection).
We are trying to load same data file with a replace option( it should delete the existing data before loading the data file). -
CVI2013 unable to load LabView RunTime-Engine?
Hello,
CVI2013 cannot load the LabView Runtime_engine any more?
With CVI2012 no problems.
I have tried it with an external dll generated with LabView 2012 (see my last post)
http://forums.ni.com/t5/LabWindows-CVI/System-error-998-in-CVI2013-while-loading-LabView-RTE/td-p/25...
and with the same dll generated with LabView 2013.
Always the error message 998 occurs.
Any ideas?
GuntherHi Bernhard,
thanks for your reply.
I have created a small project with the LabView DLL.
With CVI 2013 the programm won't start and shows the system error 998.
With CVI 2012 it works.
Hope you can reproduce this behaviour.
Best regards
Gunther
Attachments:
CR.zip 404 KB -
Flex 4.6 IOS Mobile packager - can it load and play swf's dynamically at run time?
I have an app that shows the viewer slides in a SWFLoader object. I load the slides at runtime from a remote server. When I package the app for IOS using 4.6 the swf slides load and play fine in the IOS emulator on the PC. They don't load, however, when I deploy to a provisioned iPad.
My guess is that IOS can handle doesn't know what to do with dynamically loaded swf data. I'm not positive though because it plays in the emulator. Is that emulator truly emulating xcode or is it running flash?
Note: this same app plays an rtmp flash stream just fine even on the device itself. Just can't handle a dynamically loaded swf.The correct answer to this question appears to be that Apple's terms of service *do not* prohibit the loading of swf's on IOS from remote servers dynamically at runtime. They prohibit the loading of swf's that *contain executable ActionScript code*.
I loaded a PPT into Adobe Connect and then retrieved the resultant slide swf's from the Connect server. I took these swf's and loaded them into my iPad app, dynamically at runtime, from a remote server. The swf's loaded and animations played. I made no changes to my code. I'm just using a plain old SWFLoader object.
Loading swf's dynamically at runtime from remote servers into IOS works - if you make the swf's right. How to do that I'm not sure. -
Labview Executable with VISA functions in Run Time Engine
Hi Everybody
I designed a gui to communicate using VISA GPIB. I created an executable for the gui. I also installed LabView Run Time Engine on the desired machine. I recieved couple of errors, for which I copied the files visa32.dll, NIVISV32.dll and serpdrv to the folder with the executable.
I recieved the following error, ' Initialization of NIVISV32.dll failed. The process interminating abnormally.'
Are there any drivers I should install in addition to the Run Time Engine? If so, where can I find these drivers?
Thank you
JackieI installed NI-VISA with similar version as my development installation, and LV runtime engine. Labview still crashed.
I noticed certain library functions in full labview that is not present in the NI-VISA + LV run time directory, such as _visa.llb etc.
Do I need to copy these additional library functions too? Will Run Time Engine read these library functions? -
LabVIEW 2010 Window Size/Panel Size Run-Time VI properties - unexpected behavior
I have used the VI Properties Windows Run-Time Position - Panel Size and VI Properties - Window Size to set the desired display size for use on the application PC.
A strange thing happens, when I first open the application window, it is smaller than the specified Window Size and Panel Size (both set to 1064 x 728). However, if I click on a horizontal border the window's vertical size snaps instantly to the 728 pixel value and the horizontal size in unchanged, still smaller than the 1064 value specified. When I click on a vertical border, the horizontal size changes to the specified value.
I don't believe this is how these properties were intended to work. They should open the application in a window sized as specified.
Is this a known problem? Is there a workaround.I regret that I cannot post my employers' proprietary code. I have tried to duplicate the problem with a publicly distributed VI and been unable to do so.
I believe now that it is possible my VI was "straddling" two monitors when I made the initial changes.
Later compilations were made using different VI properties and do not show this problem.
I have attached a file showing the relevant VI property settings used in the aberrant VI compilation.
Attachments:
vi properties used.JPG 58 KB -
Is it possible to load a user defined mathscript function at run-time in an executable?
I am currently allowing a customer to define their own matlab script for post-processing their data file. This is all well and good in the development environment, beecause when I re-load this VI, it searches my MathScript search paths and re-loads the .m file if it has changed. However I am noticing that when doing a build to an exe the MathScript node seems to be compiled from the file as it is at build time.
Is there anyway to avoid this? Can I programatically call the MathScript function such that it does the search at run-time? Any ideas would be much appreciated.Hey,
How are you including the .m file? Do you think you could post a screen shot of your code?
Thanks
Britton C.
Applications Engineer
National Instruments -
Visa Control grayed out when executable used with Run-time Engine
When I run an executable on a machine with only the Run-time Engine the Visa Control for Com Ports is grayed out. I'm guessing that I am missing a library, but do not know which one.
You need to install the VISA run-time. If you are just using VISA for serial communication, then there is an option on the app builder (Installer Settings>Advanced) for Serial Port Support. This will add a much smaller version of the VISA run-time engine to the installer you create. If you are using GPIB, etc., you have to install the hardware driver (i.e. NI-GPIB) and the full VISA run-time engine.
-
Unable to load php file into native window..
Hi Guys,
Im using flash cs3 as my development environment. what i was trying to do is creating a small login application using Air. I must say im still a newbie to flash air. as far as my login system concern i have managed following tasks,
1. send username ans password using post and validate through php
2. get the result back to flash application and open up a new native air window if the login is success.
3. close the login window.
now what i want to do is load my PHP application inside that newly open native window. How can i do it. I tried using Loader() method but it only worked for images not for php or html files.
heres how I tried to use the loader method,
var url:String = "http://localhost/Flash/login/welcome.php";
var fileLoader:Loader = new Loader();
fileLoader.load(new URLRequest(url));
win.stage.addChild(fileLoader);
This failed.
Does anyone know how to load a PHP file into a Native window? Your help highly appreciate it.
Just in case for the people who wants to know who I did the above mentioned tasks heres the code,
Posting data to PHP server
function sendLoginData() {
if(txtUserName.text=='')
txtBox.text = 'Username is empty';
else if(txtPassword.text=='')
txtBox.text = 'Password is empty';
else
var variables:URLVariables = new URLVariables();
variables.UserName = txtUserName.text;
variables.Password = txtPassword.text;
var request:URLRequest = new URLRequest("http://localhost/Flash/login/login.php");
var loader:URLLoader = new URLLoader();
loader.dataFormat = URLLoaderDataFormat.TEXT;
request.data = variables;
request.method = URLRequestMethod.POST;
loader.addEventListener(Event.COMPLETE, handleComplete);
loader.addEventListener(IOErrorEvent.IO_ERROR, onIOError);
loader.load(request);
Handdle the returned data
function handleComplete(event:Event):void
var variables:URLVariables = new URLVariables(event.target.data);
if(variables.errorcode==0)
var url:String = "http://localhost/Flash/login/welcome.php";
try {
//Native window
var options:NativeWindowInitOptions = new NativeWindowInitOptions();
options.systemChrome = NativeWindowSystemChrome.STANDARD;
options.transparent = false;
options.maximizable=false;
var win:NativeWindow = new NativeWindow(options);
win.title = 'welcome page';
//win.width = 900;
//win.height = 900;
/*var fileLoader:Loader = new Loader();
fileLoader.load(new URLRequest(url));
win.stage.addChild(fileLoader);*/
win.maximize();
win.activate();
stage.nativeWindow.close();
} catch (e:Error) {
trace("Error occurred!");
else
txtBox.text = 'Invalid logins';
function onIOError(event:IOErrorEvent):void
trace("Error loading URL.");
PHP code
<?php
$username = addslashes($_POST['UserName']);
$password = addslashes($_POST['Password']);
//do your database checking here. this is an example
if($username=='niroshan' && $password=='123456')
echo "errorcode=0";
else
echo "errorcode=1";
?>
Call the function when pressing the submit
cmdButton.addEventListener(MouseEvent.CLICK,readySendLoginData);
function readySendLoginData(evt:MouseEvent){
sendLoginData();
Thanks,
best regards,
NiroshanThats right, HTMLLoader should solve the issue as Loader used for JPEG, PNG OR GIF files loading as per my knowledge
Maybe you are looking for
-
How to rollback RBS and what happens to existing data
Let's say I am using Remote Blog Storage (RBS) in one of my content database and I decide not to use anymore. 1. How can I roll back RBS? 2. What will happen to my data and how can I migrate it from RBS to how SharePoint/SQL Server stores it normally
-
I just bought an Extreme Base Station. I thought I hooked it up as the directions indicated and went through the setup assistant. I have a MacBook. I have a slow dialup modem account with an ISP. I hooked the phone line into the Base Station and went
-
How do i put duplicate albums together
i have 1 album but all the songs are not together how do i put them as 1?
-
UCCX 9.0.2 Error when opening Scripts
When I attempt to open my scripts using the Unified CCX Editor I receive the following error message: Failed to load script file; com.cisco.script.ScriptITOexception: Failed to load script <script location>; nested exception is: java.io.EOFException
-
Changing white backgrounds to remove glare
Dear List Members I have been working with an e-learning developer for several years now to advise her in my capacity as a statistician on the design of e-learning materials which rely on Flash animations and objects. I am not a trained user of Flash