Unable to load multiple files to Essbase using MaxL and wildcards

I have multiple data files to load:
Files:
Filename.txt
Filename_1.txt
Filename_2.txt
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
However, when I try to run the following I receive the following error:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename*.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Error:
ERROR - 1003027 - Unable to open file [DB01/oracleEPM/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/MyApp/DB/../../Filename*.txt].
ERROR - 1241101 - Unexpected Essbase error 1003027.
I can run the following fine without any problem, but this only deals with the first of several files, and I’d rather not hard-code multiple files since the number might vary in the future:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Any ideas? And how about ASO databases?

JamesD wrote:
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
That is the tech ref for 11.1.2.2, are you on 11.1.2.2?
Import Data
11.1.2.2 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_imp_data.html
11.1.2.1 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref_1112100/frameset.htm?maxl_imp_data.html
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Load multiple files using the same data load location

    has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
    is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
    any pointers to possible solutions will be helpful

    was able to resolve this. the implementation method is as follows
    take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

  • I am  unable to load GRAPHIC files using the transaction SFP.

    I am  unable to load GRAPHIC files using the transaction SFP.
    The error message says that there is no connection to the below given url.
       http://<hostname:8000>/sap/bc/fp/
    is it something like i have to activate this service in transaction sicf ?

    Try http://<hostname:8000>/sap/bc/fp/!
    ! at the end ..
    Regards
    Juan

  • Unable to load prn file in LedgerLink

    I am working with HE641 and having to use LedgerLink to load files since there is some account translation. For some reason I am unable to load the file. This is through Citrix. During the load process, the files appears to load because the status bar appears to increment upward but when I look at Data Entry in the app, I can not see any results. Cany anyone help me with this?

    I had to get security to the translation file through Citrix.

  • Loading multiple files with SQL Loader

    Hello.
    I will appreciate your recommendation about the way to load multiple files (to multiple tables) using SQL Loader with only one Control file.
    file1 to load to Table1, file2 to load to Table2 etc.
    How the Control file should look like?
    I was looking on Web, but didn't find exactly what I need.
    Thanks!

    Ctl File : myctl.ctl
    ---------- Start ---------
    LOAD DATA
    INFILE 'F:\sqlldr\abc1.dat'
    INFILE 'F:\sqlldr\abc2.dat'
    INTO TABLE hdfc1
    (TRANS_DATE CHAR,
    NARRATION CHAR,
    VALUE_DATE CHAR,
    DEBIT_AMOUNT INTEGER,
    CREDIT_AMOUNT INTEGER,
    CHQ_REF_NUMBER CHAR,
    CLOSING_BALANCE CHAR)
    INTO TABLE hdfc2
    (TRANS_DATE CHAR,
    NARRATION CHAR,
    VALUE_DATE CHAR,
    DEBIT_AMOUNT INTEGER,
    CREDIT_AMOUNT INTEGER,
    CHQ_REF_NUMBER CHAR,
    CLOSING_BALANCE CHAR)
    -----------End-----------
    Sqlldr Command
    sqlldr scott/tiger@dbtalk control=F:\sqlldr\myctl.ctl log=F:\sqlldr\ddl_file1.txt
    Regards,
    Abu

  • Unable to read multiple files in BODS

    hi all,
    i am unable to read multiple files [with same format of fields] using wild card characters in file name.
    scenario:
    i have 2 files: test1.xlsx & test2.xlsx
    in the excel file format, for the file name column, i have given test*.xlsx.
    and done the direct mapping to target column.
    but when i run the job i am getting below error.
    at com.acta.adapter.msexceladapter.MSExcelAdapterReadTable.ReadAllRows(MSExcelAdapterReadTable.java:1242)
    at com.acta.adapter.msexceladapter.MSExcelAdapterReadTable.readNext(MSExcelAdapterReadTable.java:1285)
    at com.acta.adapter.sdk.StreamListener.handleBrokerMessage(StreamListener.java:151)
    at com.acta.brokerclient.BrokerClient.handleMessage(BrokerClient.java:448)
    at com.acta.brokerclient.BrokerClient.access$100(BrokerClient.java:53)
    at com.acta.brokerclient.BrokerClient$MessageHandler.run(BrokerClient.java:1600)
    at com.acta.brokerclient.ThreadPool$PoolThread.run(ThreadPool.java:100)
    please let me know if there is any solution to this.
    regards,
    Swetha

    Hi,
    i just copied a xlsx file with 3 different names (Test_Data.xlsx, Test_1.xlsx, Test_2.xlsx) and tried with below options and it worked for me.
    Note: I tried on the same OS and DS 4.1 SP2(14.1.2.378)versions. In Linux File names are case sensitive.

  • Crystal Xcelsius is unable to load this file...  no upgrade 4.5 to 2008 :(

    Post Author: jezbraker
    CA Forum: Xcelsius and Live Office
    Anyone else having problems getting 4.5 files to open in 2008? I create a nice simple new xlf with a simple xls behind it and a just a grid component in 4.5, then try open the file in 2008 and i get... Crystal Xcelsius is unable to load this file. This file may be corrupt or have features that cannot be supported by this version of Crystal Xcelsius.im on the following versions...Version 4.5Application Version 4.2.4.3File Version 1.1.0.2Version 2008Application Version 5.0.0.99Build Number 12,0,0,121 I'm hoping that this is just a version issue with what was on ESD... the help file seem to suggest upgrade is simple so would but good to here of folks having sucess - and if so what versions your on thanks!jez.

    Post Author: jezbraker
    CA Forum: Xcelsius and Live Office
    well i hope thats the case... but its a bit strange that neither the beta versions i tested or this ESD version (its not very clear as to if its pre-release - nothing on the splashscreen/about to indicate its not the full thing) can open 4.5 files...  suggests that the beta did not cover backward compatability which is a bit concerning :(hopefully im just missing something simple!from the help file in the '08 version i have here...Xcelsius supports the ability to import a visualization created
    with Xcelsius 4.5. This import ability lets Xcelsius 4.5 customers upgrade their
    existing visualizations to take advantage of the new features of Xcelsius 2008.
    Backup your current XLF, JPEG, and external SWF files before upgrading your
    visualization.
    Note: Xcelsius 3.0, 3.5, and 4.0 files cannot be
    imported into Xcelsius 2008. To use these files in Xcelsius 2008 you must first
    import them into Xcelsius 4.5, then import the files into Xcelsius 2008.

  • SQL Loader - Load multiple files in UNIX

    HI all, I'm looking for a bit of help with using SQL LOADER to load multiple files into one table. I've had a look on the forums but still struggling with this one.
    What I want to do is basically upload everything thats in /home/ib. I know you can use INFILE for several files in the control file but I have several hundred files to upload so this isn't practical. Can I pass the directory name as an INFILE parameter?
    Any help would be appreciated.

    On Unix you shouldn't worry about that. See this example :
    [ora102 work db102]$ cat test11.dat
    aaaaa,bbbbb
    ccccc,ddddd
    eeeee,fffff
    [ora102 work db102]$ cat test12.dat
    ggggg,hhhhh
    jjjjj,kkkkk
    lllll,mmmmm
    [ora102 work db102]$ cat test13.dat
    nnnnn,ooooo
    ppppp,qqqqq
    rrrrr,sssss
    [ora102 work db102]$ cat load.sh
    CTL=load.ctl
    echo "load data" > $CTL
    for DAT in test1*.dat
    do
            echo "INFILE "$DAT >> $CTL
    done
    echo "replace"                  >> $CTL
    echo "INTO TABLE test1"         >> $CTL
    echo "fields terminated by ','" >> $CTL
    echo "trailing nullcols"        >> $CTL
    echo "( a, b )"                 >> $CTL
    sqlldr test/test control=load.ctl
    [ora102 work db102]$ ./load.sh
    SQL*Loader: Release 10.2.0.1.0 - Production on Mon Oct 2 11:45:44 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Commit point reached - logical record count 3
    Commit point reached - logical record count 6
    Commit point reached - logical record count 9
    [ora102 work db102]$ sqlplus test/test
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 2 11:45:49 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    TEST@db102 SQL> select * from test1 order by a,b;
    A                    B
    aaaaa                bbbbb
    ccccc                ddddd
    eeeee                fffff
    ggggg                hhhhh
    jjjjj                kkkkk
    lllll                mmmmm
    nnnnn                ooooo
    ppppp                qqqqq
    rrrrr                sssss
    9 rows selected.
    TEST@db102 SQL>                                                                              

  • Mail Unable to load nib file: MailViewer

    Mail decided not to work. looking at the console I get:
    Mail Unable to load nib file: MailViewer, exiting
    I read somewhere that it might have gotten corrupted, and that therefore I need to reinstall. Is there an easy way to install just Mail in its latest version and not go through (likely outdated) pkg installers? Even better, any other way of solving this problem?
    Many thanks in advance.
    Ivan

    I would say you have a serious issue with your hard drive. Consider doing a format with zero all data options enabled, and see if it pass. You might also consider buying some advanced disk repair utility to test (and repair ?) the drive (TechTool, DiskWarrior or Drive 10).
    Is there an (windows burnable) image "updated rescue disk"?
    No, the restore disk comes with each machine and is to keep in safe place.
    Use it to reinstall your system and apply the Mac OS Update via Software Update or using the same combo update.
    Why reward points ?

  • Xcelsius is unable to load this file.It may be corrupt or have features

    Hi All,
               While i am opening XLF file i got bellow message:
    "Xcelsius is unable to load this file.It may be corrupt or have features that are supported by this version of Xcelsius"
    i m unable to open that file .I lost whole thing.so can any one help me how to resolve this problem.
    Regards,
    Ramana

    Hi,
    Which version of xcelsius you are using now !
    The file which you are trying to  open may be created in higher version of xcelsius
    So upgrade to latest version and try.
    Before opening xcelsius check if EXcel.exe is running from taskmanager -->processes
    if that is runnning end the process.
    @sri

  • Unable to upload multiple files

    In MOSS, I am unable to upload multiple files from the Site Actions | Manage Content and Structure | New | Item menu. I have tried adding Word documents and image files (JPEG, GIFS) to no avail into the \images or \document folders. Even if I try just one file, three or five, the menu never initiates or progresses. It just sits. If I cancel, the menu returns immediately. I have tried to change security settings with no success. Trying to upload multiple files on different MOSS installations also fails. If this is related to a Web Dev settings, can you tell me exactly where the setting is? Thanks for your insight. cm

    Believe it or not, I have found a solution after about 4hrs of fiddling around. This appears to be a bug in Sharepoint 2007. There is a work around that I have discovered! Follow the steps below and let me know if this works for you. It has worked for me and other people so far.
    The steps are as follows:
    1) Browse to your website at http://<servername>/_layouts/settings.aspx; you will need to login by providing a service account name & password or your site collection administrator account & password.
    2) Once you login, click on 'Site Actions' menu.
    3) Then, click on 'Manage Site Content and Structure'.
    4) Click on any document library you want to upload or add files into. If you do not see the 'Upload' menu from the dropdown main menu between the 'New' and 'Actions' menu then you have this bug as well showing up on your server. Don't give up yet, there is a solution. Keep going through these steps!
    5) Click on 'New' and select 'Item'.
    6) You should now see the Upload Document page; under the input browse field there should be a link for 'Upload Multiple Files...', if you do not see this you will need to install either Office 2003 or Office 2007. If you do see it, click on it.
    7) Now, you should see the multiple upload page that allows you to select multiple files. If you try to select one or several and click on the OK button, nothing will happen. No need to worry! There is a work around. Just keep reading to the next step.
    8) On the hierarchy navigation you will have links something like this:
    WebSiteName > Folder1 > Folder2
    9) Click on the "Document Library" folder name; in our case it was Folder1. Basically its the folder you ended up in in step #4.
    10) Now, did you notice anyting in your menu change? Now you should be able to see the Upload menu option between the 'New' and 'Actions' menu that you could not see in step #4.
    11) Click on the 'Upload' menu and select 'Upload Multiple Documents'
    12) Now, you will be back at the Upload document page where you were in step #7
    13) Select one file or many and then click OK. Now it works!!! You should get an IE popup asking you that your about to upload files to your site, Click OK.
    VOILA!!!
    Don't ask me why, I do not know why this happens but it works.

  • How To Split File In to Multiple Files With out using B.P.M

    Hi Guys,
    How To Split File In to Multiple Files With out using B.P.M.
    Thanks in advance
    Regards's
    KIran.B

    Hello
    below r the links were u will find message spilitting by graphicaaly i.e without using BPM.
    /people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
    Sender File Adapter with file conversion  Multimapping --file content conversion with split messg mapping
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2748---- [original link is broken] [original link is broken] [original link is broken]
    multimappig
    /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
    hope this resolve your problem
    thank's
    Chetan

  • QuickTime fails to launch: "Unable to load nib file"

    QuickTime has decided today that it will no longer launch. When I look at the message generated in Console it says:
    "QuickTime Player[300] Unable to load nib file: MainMenu, exiting"
    This has been happening since I updated my copy of Fetch. I have tried reinstalling QuickTime but it hasn't helped.
    I am running QuickTime Pro 7.1.6 with DivX and Flip4Mac, both of which were installed some time ago and everything has been running fine until this morning.
    Any ideas what I should do next?
    Thanks.
    iBook G3   Mac OS X (10.3.9)   QuickTime Pro 7.1.6 with DivX and Flip4Mac 2.1.1.70

    Did you repair permissions & restart after the
    update?
    I tried repairing the permissions and QuickTime still failed to launch; however, I didn't think to restart the machine. But then I fired up TechTool and it found problems with the volume structure, repaired it, and all is good now. So I'm not sure if TechTool fixed the problem or if it was eventually restarting after repairing the permissions.

  • Loading Vrml files in Swing using java3d loader

    I've got problems loading Vrml files in Swing using java3d vrmlLoader. It seems to be only able to load vrml files that contains simple geometry like squares, cones etc. But when it comes to complicated shapes like IndexedFaceSet, its a blank. Does anyone know why?
    What are the points to note when loading vrml files? Doesn't the code:
    vrmlLoader = new VRML97Loader(VRML97Loader.LOAD_ALL);
    and
    scene = vrmlLoader.load(loadUrl);
    load the entire vrml file? Is there any comprehensive tutorial or example that I can refer to? The fly through in Java 3d demo is too complicated. I'm still pretty new to this field. Thanks.

    Did you download the example VRML file I had listed?
    First make sure you test it with that one...it that works
    then maybe the VRML file you are using is not version
    #VRML V2.0 utf8
    ...Actually, I think you'd get some parsing error if you
    used a VRML v1.0, so that probably is not the issue.
    Do you have the vrml97.jar file in you path, maybe?
    Check you path in Windows by typing "path" in command window. If you have the vrml97.jar file then
    that's cool...if not then you must add it to your path.
    OR you can temporarily compile by invoking
    the -classpath <path> command....I think you'll have to
    do the same when running the code....so do:
    javac -classpath PUTPATHHERE TestVrml.java
    java -classpath PUTPATHHERE TestVrml
    If that doesn't work, do you have Java 3D installed?
    just checking...
    I'm kind of lost as to what to do beyond that....by the way, I double checked my files and and recompiled and
    reran them and they work fine. I've also checked them
    on a different computer at work and they work their too.
    So, long story short, it's something wrong on your end either with the java install or the vrml97.jar file not being in the path...I don't know much more.
    Let me know if anything worked.
    Mariusz Zaczek ([email protected])

  • *** Question How to load a file into BI-Integrated Planning and use WAD 7.0

    Hi, I created an manual DTP upload to my planning infocube and it works fine.  The transformation rules convert 0CALMONTH into the relevant Calendar and Fiscal characteristics.   So all of my Time Characteristics are fine, both Calendar and Fiscal.
    However, When using the "How to load a file into BI-Integrated Planning and use WAD 7.0" solution, only the Calendar Characteristics are populated and not the Fiscal.   The upload application somehow knows to populate the 0CALMONTH2, 0CALQUART1, 0CALQUARTER, and 0CALYEAR.  
    How can I get the upload to populate my Fiscal Period Characteristics?
    Would it be best to modify the "Upload Application, or can I write a planning function to update the fiscal characteristics, or some other way?
    Thanks!

    My planning data is being uploaded via the SDN Planning File Upload Solution. What I did was end up modifiying the upload class ZCL_RSPLF_FILE_UPLOAD Method EXECUTE.
    I added the following code if anyone is interested.
    *{ INSERT BWDK902323 1
    THIS SECTION OF CODE POPULATES THE FISCAL PERIOD CHARACTERISTICS
    USING THE FISCAL YEAR VARIANT 'NK' AND THE CALENDAR MONTH/YEAR
    FIELD-SYMBOLS <0FISCVARNT> TYPE /BI0/OIFISCVARNT. " Fiscal Year Variant
    FIELD-SYMBOLS <0FISCYEAR> TYPE /BI0/OIFISCYEAR. " Fiscal Year
    FIELD-SYMBOLS <0FISCPER> TYPE /BI0/OIFISCPER. " Fiscal Year/Period
    FIELD-SYMBOLS <0FISCPER3> TYPE /BI0/OIFISCPER3. " Posting Period
    FIELD-SYMBOLS <0CALMONTH> TYPE /BI0/OICALMONTH. " Calendar Month/Year
    ASSIGN COMPONENT '0CALMONTH' OF STRUCTURE <L_S_DATA> TO <0CALMONTH>.
    ASSIGN COMPONENT '0FISCPER' OF STRUCTURE <L_S_DATA> TO <0FISCPER>.
    ASSIGN COMPONENT '0FISCVARNT' OF STRUCTURE <L_S_DATA> TO <0FISCVARNT>.
    ASSIGN COMPONENT '0FISCPER3' OF STRUCTURE <L_S_DATA> TO <0FISCPER3>.
    ASSIGN COMPONENT '0FISCYEAR' OF STRUCTURE <L_S_DATA> TO <0FISCYEAR>.
    <0FISCVARNT> = 'NK'.
    CALL FUNCTION 'FISCPER_FROM_CALMONTH_CALC'
    EXPORTING
    IV_CALMONTH = <0CALMONTH>
    IV_PERIV = <0FISCVARNT>
    IMPORTING
    EV_FISCPER3 = <0FISCPER3>
    EV_FISCPER = <0FISCPER>
    EV_FISCYEAR = <0FISCYEAR>.
    *} INSERT

Maybe you are looking for