Unable to load OS X.3 on iMac G3

I bought a used iMac G3, 450 mHz, 1 Gig hard drive. It came with 9.2 (which is now gone). I installed X.3 on a tower G3 earlier in the day with 9.2 on it... it went fine. Went to the iMac... put the CD in, go through all the beginning stuff, starts loading... after about 10 or 15 minitues, a black box comes up on the screen and says I need to restart my computer. I don't even get to the 2nd of the 3 disks to install. Any ideas? I've tried partitioning the HD, that didn't work. The computer doesn't give me any messages regarding partitioning or updating the firmware. It's driving me CRAZY!!! HELP!!
Thanks!

Hello Again!
If you can get it to boot from the install cd reformat the drive in disk utility and use the zero option and then try a reinstallation. Ram could be a problem as OSX is very picky and you may have to remove some ram that may not be up to spec. Sorry but that's usually a trial and error thing until you figure out which stick is causing the problem. I'd try zeroing the disk first. Tom

Similar Messages

Quicktime: Unable to load nib file: MainMenu, exiting.

Recently updated OS X to 10.6.8
Ever since the upgrade, my system quicktime player is completely dead.   Will not launch, displays generic icon in the application folder.
iMac:QuickTime Player.app ryan$ pwd
/Applications/QuickTime Player.app
iMac:QuickTime Player.app ryan$ ls
Contents
iMac:QuickTime Player.app ryan$ cd C*
iMac:Contents ryan$ ls
Info.plist    MacOS        Resources    _CodeSignature    version.plist
iMac:Contents ryan$ cd M*
iMac:MacOS ryan$ ls
QuickTime Player
iMac:MacOS ryan$ ./Q*
2011-12-16 13:40:05.201 QuickTime Player[30859:903] Unable to load nib file: MainMenu, exiting
iMac:MacOS ryan$
I've run the repair permissions utility, within the disk utility several times on the volume.
I've run the verify disk utility on the volume - no problems reported.
No other application issues that I've noticed; only quicktime is broken.
Not sure what to do next.   If it gave me a clue about which "nib" file it was after I could go check it.
iMac:English.lproj ryan$ pwd
/Applications/QuickTime Player.app/Contents/Resources/English.lproj
iMac:English.lproj ryan$ ls -lrt
total 0
-rw-r--r-- 1 root wheel 5143 Aug 8 06:39 ExportRefMovieForWebTemplate.html
-rw-r--r-- 1 root wheel   350 Aug 8 06:39 SaveForWebiFrameTemplate.html
drwxr-xr-x 2 root wheel   102 Aug 8 06:41 MGRemoteHUDView.nib
iMac:English.lproj ryan$ cd *nib
iMac:MGRemoteHUDView.nib ryan$ ls -lrt
total 0
-rw-r--r-- 1 root wheel 4208 Aug 8 06:39 keyedobjects.nib
Am I missing files in that directory structure??

Did you repair permissions & restart after the
update?
I tried repairing the permissions and QuickTime still failed to launch; however, I didn't think to restart the machine. But then I fired up TechTool and it found problems with the volume structure, repaired it, and all is good now. So I'm not sure if TechTool fixed the problem or if it was eventually restarting after repairing the permissions.

Unable to load CS5.5 on my 10.9.5 iMac

Unable to load CS5.5 on my 10.9.5 iMac window pops when I try to open 'Could not initialize Photoshop because the disk is not available'. This is a Student and Teacher copy. Can someone help me with this?

It is not clear if you understand what that message is indicating. It is telling you that you need to identify the older version of whatever CS5.5 upgrade you are installing to prove that you qualify for the upgrade. This could be CS5, CS4, etc.
Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

Unable to load Flash 9 on my Intel MacBook Pro

Unable to load Flash 9 on my Intel MacBook Pro but can on my
Intel iMac. I spoke with a Tech from the Mac Store service area and
was told that there in a thread on this issue but I can't find it.
The basic issue is that I am able to load Adobe Flash Player
9 on my Intel iMac but not on my Intel MacBook Pro and I'm unable
to determain why. I tryed uninstalling and reinstalling three times
and found no difference.
If someone could help me I'd be thankful.
Dave

I bought the $29 version of Snow Leopard (not the kosher way of doing things, i know.
If you read the license agreement, there's actually no difference between what's allowed with the $29 copy and the $169 boxed set. The only difference is that the boxed set also includes iLife and iWork. There is also, despite what some will have you believe, nothing in the license agreement that requires Leopard to be pre-installed except in the case of the $10 disk purchased as part of the Up-to-Date program (for folks who bought a machine shortly before SL was released). So, you're not being bitten by some technical requirement for Leopard to be present.
I get a flashing folder with a question mark. My disk drive makes some crazy noises as well, and it seems to start running fast, then slowing down. I think it may have caused a minor scratch on the disk as well.
Sounds like it's possible the drive could be failing, though that's impossible to say for sure remotely. One man's crazy noises are another man's normal state of operations. Do other DVDs work in your drive?
I'll also need to do an "Archive & Install" since there are tons of important files on this machine.
*DO NOT* attempt to install a system update on this machine unless you have good backups! If something goes wrong, you're screwed if you didn't have a backup. Hopefully, you have not reached that point already... I'm unclear on whether your machine is no longer able to boot, or if it's only having trouble when you try to boot from the SL disk.
If your machine is still functional, your first priority before doing *+anything else+* should be to make at least two backups. See my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups> for assistance with this.
If your machine can't boot anymore, let us know and we'll offer some troubleshooting tips. And don't try to do anything else with it until you've consulted with some expert, whether here or at an Apple Store or somewhere else.

Problem with FLASH 9 - unable to load plug-in

At a website request to update to Flash 9 to allow my ibook to visualize soime content, I downloaded the installer from ADOBE and tried to update. Now every time a website has a Flash component I get the following message:
UNABLE TO LOAD PLUG IN
"The page “XYZ" attempted to load an Internet plug-in named “Shockwave Flash”, but the plug-in failed to load successfully."
I downloaded the Flash uninstaller, run it, installed again version 9 but I still get the same error message.
Then I thought some Safari files could have been damaged, but when I download the installer for Safari 1.3.2 and tried to reinstall it, I get a message saying that "this software can't be installed on this system".
Questions: any suggestions? is Flash 9 compatible with MAC OS 10.3.9? Is it a Safari problem (my current version: 1.3.2) Thanks a lot.
Calvin183

You know what you're writing about!
My wife would have a very different opinion.
You're welcome Calvin. Glad I could help.
Thanks for the and Aloha from Big Island.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.8) LaCie 160gb d2 HD Canon i960 printer, Airport Express (2 units)

Unable to load Flash player

On my IMac, OSX 10.5.8, Lightroom running 64 bit I am not able to see any Flash galleries in the Web window - "Unable to load Flash player". Changing to 32 bit solves the problem, but was not the idea of creating a 64 bit version i suppose.
Tried uninstalling Flash Player and then reinstalling it - did not change anything.Tried creating a new account - same result.
I am also running a beta version of Lightroom 3 on my MacBook Pro in 64 bit, same OSX, and it does NOT have the same problem. Flash galleries showes up just fine.
Any ideas what to do other than wait for Flash Player 64 bit?

Flash Player is integrated into IE for Windows 8 & 8.1 by Microsoft. Since it's a "plug-in" and NOT a program, you'll NEVER find it listed as a program. It's located in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash.
The problem with IE11 is that Microsoft not only screwed up the code, but they refuse to admit it doesn't work. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Lightroom 3 - Web module - Unable to load Flash Player

Running to most uptodate version of Lightroom 3 - on OS X 10.6.4 also fully up to date. Have downloaded and installed the latest Flash Player from the site. This problem seems only to be on my 2.8ghz iMac with 2 gig of RAM. Lightroom 3 and flash galleries work great on my 2ghz Macbook with 2 gig of RAM.
When accessing the web module and trying to use one of the flash templates I either get a blank black screen or a white one with the error message of Unable to Load Flash Player. From there I hit the Preview in Browser button and a flash gallery did come up in Safari, just not in Lightroom.
Does anyone else have this problem, and more importantly how did they solve it.........

Replying to myself.... I solved the problem by creating a new User Account in my OS. Solved the Lightroom problem and also a problem with Mini Bridge in Photoshop CS5, where it wouldn't open Bridge.

10.5.6: "Unable to load Info.plist exceptions (can't get exceptions URL)"

Hi, all. I just upgraded my iMac G5 to 10.5.6 using the software updater. Now when I'm working with a terminal window open, I get messages like this:
Computer:~ mine$
Broadcast Message from [email protected]
(no tty) at 22:34 EDT...
Mar 30 22:34:29 Computer /System/Library/Frameworks/PubSub.framework/Versions/A/Resources/PubSubAgent.ap p/Contents/MacOS/PubSubAgent[1563]: Unable to load Info.plist exceptions (can't get exceptions URL)
Broadcast Message from [email protected]
(no tty) at 22:34 EDT...
Mar 30 22:34:31 Computer /Applications/iPhoto.app/Contents/MacOS/iPhoto[1562]: Unable to load Info.plist exceptions (can't get exceptions URL)
I am completely at sea. Can anyone please help? Thanks.

Hello, I have the same problem!
The same broadcast messages: Unable to load Info.plist exceptions (can't get exceptions URL)
also I can't install nor 10.5.7 update, nor combo update. I receive the same Install Failed error message. I tried archive and install from original system DVD. Allways the same error message:
Install Failed
The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement.
Did you find any solution?
Zoli

Open Directory: "Unable to load replica list"

I'm currently running Mavericks Server 3.1 on my Mac Mini at the home network. I had some issues with the client logins and went for local accounts on the clients instead. Today I finally wanted to fix the problem and go all Open Directory. But the Open Directory service was shut off when I opened the server software. I tried to turn it on but got a message saying "Unable to load replica list". I updated the software to the latest 3.1 but are still having the same issue. I never had any replica list, I only had a standard one from the start, but it seems I can't do anyhing there now.
LDAP log:
Mar 21 22:48:38 xxYY.com slapd[172]: @(#) $OpenLDAP: slapd 2.4.28 (Nov 12 2013 12:02:47) $
[email protected]:/private/var/tmp/OpenLDAP/OpenLDAP-491.1~1/servers/slapd
Mar 21 22:48:38 xxYY.com.com slapd[172]: daemon: SLAP_SOCK_INIT: dtblsize=8192
Mar 21 22:48:39 xxYY.com.com slapd[172]: TLS: found identity in keychain using identity preference.
Mar 21 22:48:42 xxYY.com.com slapd[172]: slap_add_listener: opened additional listener 'ldaps:///'
Mar 21 22:48:42 xxYY.com.com slapd[172]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Mar 21 22:48:44 xxYY.com.com slapd[172]: slapd starting
Mar 21 22:48:44 xxYY.com.com slapd[172]: daemon: posting com.apple.slapd.startup notification
Mar 21 22:48:54 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_del id failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:48:54 xxYY.com.com slapd[172]: conn=1022 op=3: attribute "entryCSN" index delete failure
Mar 21 22:50:02 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:50:02 xxYY.com.com slapd[172]: conn=1042 op=3: attribute "entryCSN" index delete failure
I don't understand any of this other than the obvious failure words. Can anyone understand this and help me here?

This procedure is a diagnostic test. It makes no changes to your data. If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Please triple-click anywhere in the line below on this page to select it:
sudo /usr/libexec/slapd -Tt | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

SWPM - System Copy - Assertion Failed Unable to load database

Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
 CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> An error occurred while processing option SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.). You can now: <ul>
<li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.

Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O

Hyperion Essbase Error: 1002097 Unable to load database [PlanType1]

Hello,
I am running Hyperion Essbase 9.2.0.3 version. This has happened 3 times now since last 2 weeks. I had to restore the APP folder from previous backup.
The message that i see is Error: 1002097 Unable to load database [PlanType1]
I have searched google and no luck. Anyone knows how to fix this or why we get this message. I don't want to restore from backup everytime.
Thanks
Azmat Bhatti

I think you have currepted backup.
Try run essmsh script to recover broken block's.
Backups - Files still locked after beginarchive

Torrentflux 2.4 (ADONewConnection: Unable to load database driver)

I'm trying to setup Torrentflux 2.4 on my server.
I used the torrentflux PKGBUILD vom AUR: http://aur.archlinux.org/packages.php?ID=1664
I set up Apache/MySQL/PHP following the guide. PHP test script is working fine:
<?php phpinfo(); ?>
I setup a symbolic link from /srv/http to my /opt/torrentflux
ls /srv/http/
insgesamt 4
-r--r--r-- 1 root root 20 6. Mär 21:23 test.php
lrwxrwxrwx 1 root root 17 6. Mär 21:07 torrentflux -> /opt/torrentflux/
When I try to open /torrentflux/login.php in my webbrowser it says
ADONewConnection: Unable to load database driver ''
I left the default in torrentflux' config.php:
$cfg["db_type"] = "mysql"; // mysql, postgres7, postgres8 view adodb/drivers/
ls /opt/torrentflux/adodb/drivers/
insgesamt 532
-r--r--r-- 1 root daemon 20476 6. Mär 20:44 adodb-mysql.inc.php
-r--r--r-- 1 root daemon 25340 6. Mär 20:44 adodb-mysqli.inc.php
-r--r--r-- 1 root daemon 3220 6. Mär 20:44 adodb-mysqlt.inc.php
I'm pretty new to the whole LAMP stuff, so can please any1 tell me what's going wrong?

Ok, some questions:
1. Did you enable mysql in php.ini?
http://wiki.archlinux.org/index.php/LAMP#MySQL
2. Did you read / follow the torrentflux installation guide included with the installation?
(if not, check here: http://www.torrentflux.com/)
3. I have not worked with the package from AUR, the package form the official site (again, http://www.torrentflux.com/) works well for me. Did you try this?

"Error 1002097 Unable to Load database" while starting an Essbase App.

Hello Essbase Experts,
I am getting below error while starting an Essbase Application:
"Error 1002097 Unable to Load database"
Below is an extract from the Essbase Application Log:
[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
delay.
[2012-04-04T14:14:04.821-19:14] [RPA] [ESM-5] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure other processes do not
access Essbase files while Essbase server is running.
[2012-04-04T14:14:04.821-19:14] [RPA] [MBR-89] [WARNING] [1][] [ecid:1333566842161,0] [tid:2058170128] Unable to open
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for database
[RPA][2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database [RPA]
[2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
[2012-04-04T14:14:04.835-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
Please sugest pointers to start the application.
Thanks,
KK

*[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file*
Solution would be easy ...like if the Essbase Agent is stopped using the services.msc (services panal)on Windows while a process is currently running, or if there has been an abnormal termination of the Essbase Agent, orphaned ESSSVR processes can be left. Shuting down the Essbase server using ESSCMD or MaxL then Check Task Manager confirm the ESSBASE.exe process later by this ESSSVR.exe processes should end if still NO then Do an "End Process" on any ESSSVR.exe process that is still running. Start the Essbase service and start the application.
ESSSVR.exe is process which keep application Alive (bad thing is if u have many applications running similarlly u have same numbe of ESSSVr .exe will be running in task master ..but u cant find out which one belongs to which application :( )
Reasons
looking at your error i can say , First of all you need to know what is Lock in EAS ? and what locks exist
(right-click on Essbase Servername, EDIT->LOCK and EDIT->LOCKED OBJECTS, and if your database/outline appears in there, unlock it.)
Check any antivirus- and backup software that may be scanning / running on your Essbase folders as that can lock the files and any ESSSVR process stays when the Essbase Agent is stopped
More over another chance of getting error is when you have you page and index files in different location and rest otl, rep.csc script in another drive .. usually while taking back up in OTL,csc drive u do get created index file and page file even u have page and index file in diffrent drive so doe to this u get this error unable to load database
Hope this give u some idea

Unable to load OS X.3 on iMac G3

Similar Messages

Maybe you are looking for