Unable to load/play sound files using SoundEngine_LoadEffect

Hi All,
I am able to load/play sound files using SoundEngine_LoadBackgroundMusicTrack but unable to load/play sound files using SoundEngine_LoadEffect on iPhone Simulator. I am using the SoundEngine.h/cpp from Crash Landing. Oddly enough sound effects load and play succesffully when i start the app with 'Start with Performance Tool'. Does anyone know what is actually going on.
Also i would like to know what is the difference between playing sound files using these two methods. What are the restrictions on individual sound file types for each method.
Thanks

I was able to load/run the sound effects after using Simulator - iPhoneOS 2.1 in the Active Target/Build drop down on Xcode toolbar. Both Active SDK, and Active Executable should be 2.1 in order to play the sound effects.

Similar Messages

  • JMStudio locks up playing sound file - using java 1.5.0_02 - HELP!

    I'm using the jmf 2.1.1e cross platform version on Windows XP SP2. I have java 1.5.0_02 installed.
    When I open the sound file using JMStudio it locks up. It plays videos that don't have sound fine, so it's not the video. It's the sound that is killing it.
    Does anyone have any suggestions?

    Hi,
    yeah it's possible to play sound on Windows but you have to use the Windows Performance Pack instead of the crossplatform-version of JMF.
    This has to do with the JavaSound Architecture of Java 5.0. They made changes and now the JavaSound Renderer didn't work under Windows but the DircetSound Renderer works fine.
    So be sure that your application uses the DirectSound Renderer!
    This is one of the main problems of JMF but now Sun gets interested in JMF and they would build a new version of JMF. If this is true they have to fix this problem!
    Best regards, thomas

  • What's the best solution for audio out of sound files from a MacBook Air to both an amplifier and to a subwoofer amplifier? I'm using the MBA to play sound files for worship services at our church.

    I have a MacBook Air (13", 1.7GHz, 8GB RAM, 500GB SSD) that I'll be using to play sound files (primarily organ and piano) for worship services at my church. We'll be using a QSC RMX2450 650 Watts/Channel amplifier with Community CPL-27 speakers and also a JBL SUB 250P powered subwoofer with its own amplifier. What's the best option for getting sound out from the Mac to both of these amplifiers? 

    if you work with own recorded sounds you might wanna have a music program where you want to work with samples, steinberg has got very good ones (so they say)... but their really really ( ²) expensive(that's why almost no one haves them), magix haves good ones too bu their more for 'unprofessional' use, ableton haves really good ones too and they're not to difficult to use (if you know a bit of those programs you learn very quickly) and if you don't get them, there is a sort of manual built in it which explains and lets you do things to start (basics)
    i hope this helped, btw stereo speakers are always better if you buy good ones (no pc speakers), but if you don't think you need them, don't buy them...
    so again, i hope you have some ideas now

  • Unable to Load Portable Collection File

    Hello, I created a Portable Collector and am trying to load this file into my Zenworks 7.5 (R12) but I keep getting the following error message when I use the wizard to import it:
    "There were problems loading 1 workstation inventory files. For details, refer to the Manager event log or the error log file from which you loaded data."
    I'm not sure where the Manager event log is nor the error log file that they're referring to. I checked the application and system event logs in MS event viewer but that showed nothing. I resorted to checking the install path event logs and found this in TSCMgrEvent20080617.log:
    <EVENT AT="6/17/2008 8:53:55 PM" SEVERITY="Info">
    Application Object Info at 6/17/2008 8:53:55 PM on KCAMOM09 by KCAMOM09
    Object Deleted
    [2.4.100] The object was deleted by another user or process.
    Class:"Collection Server"
    Name:"KCAMOM09"
    Database Persistence Layer Info in CDBPersister::Retrieve at 6/17/2008 8:53:55 PM
    Object Deleted
    [2.5.9] was deleted by another user.
    </EVENT>
    <EVENT AT="6/17/2008 8:53:55 PM" SEVERITY="Warning">
    ZENworks Asset Management Manager Warning at 6/17/2008 8:53:55 PM on KCAMOM09 by KCAMOM09
    Load Portable Collection Failure
    [2.8.100] Unable to load workstation inventory file: c:\91DA8A7A-FA60-47D4-9D9D-C8B5CB322DB1.wif.
    </EVENT>
    I check the inventory from the web console and the computer isn't even listed there. Can anyone shed any light? I've searched the forums and the KB and found nothing at all. I need to get this portable collector up by this weekend...any help would be greatly appreciated!
    - Tommy

    A couple of things... first, you MUST load a Portable Collection using the same Collection Server as created the Portable Collector. Second, it sounds very much like somehow your Portable.Ini has gotten dinged. That's not a file you can simply edit and save; if you try, ZAM will stop working. It needs to be updated in the File Store before it'll be accepted. That's a security measure to prevent outside influences from altering that file (as others) for nefarious purposes.
    Please contact Novell Technical Support and tell them that your Portable.Ini needs to be replaced. They'll send you a good copy of Portable.Ini and set you up with UpdateFS, which will register the good copy in your FileStore.
    Another possibility... are you running Oracle instead of MSSQL? It's possible that one or more filenames in the File Store are out of sync with their names in the DB. Oracle being case-sensitive, that's very very easy to do. Again, Novell Technical Support can help you through fixing it if it's true. It's not something that can be simply remedied by oneself.
    -- Tim --
    Originally Posted by tommytu
    I've tried creating a portable collector from the same machine and it seems to not work after installing IR12.
    I get the same message if I try to use a portable collector creating from another server (but changing the collectionserverOID in CPS.ini). Will this work? is there something else I have to change?
    I've noticed that when I create the portable collector, I only get the following files:
    checkpath.exe
    collect.bat
    coptset.kb
    cps.ini
    disk1.tsz (4.4 megs)
    end.bat
    fec.kb
    findst.exe
    ignore.dat
    lastprog.dsk
    logappnd.exe
    pextract.exe
    setcwd.tem
    spacew32.exe
    udf.kb
    zamstr.bat
    When I run this collector, I get a "COLLECT2.BAT is not recognized as an internal or external command."
    The collector that works has a bunch of other files including collect2.bat
    Any ideas?

  • Problem with loading a sound file

    Hello, I am trying to play a sound file (located in same dir as the class files) from a swing app using this line.
    AudioClip clip = Applet.newAudioClip(new URL("sound.au"));When I run the program, I always get a MalformedURL Exception.
    Could someone please tell me the correct way to load a sound file in swing.
    Thanks

    "sound.au" is no valid URL, hence the exception.
    How about "file:///c/myfiles/sound.au" or something?

  • Unable to load Site Control File

    Hello,
    The background :
    I am in the process of learning how to create a Management Pack for a distributed application in SCOM 2012 R2.</p><p>For this, I picked our SCCM Site server to use as an example. So, in short, am writing a management pack for SCCM 2007 Discovery.
    I know a management pack might already exist. I am trying to learn by using an architecture I'm familiar with so I need to create this from scratch.
    In order to discover SCCM Site installed on a server, I decided to use the SMS WMI namespace. By reading the
    SMS_ProviderLocation Instance, I am able to detect if the server has SCCM Site installed on it.
    My next step was to find out where the SMS database is hosted. I found
    ROOT\SMS\site_ABC\ namespace contains an instance of SMS_SCI_SiteDefinition where I can find the database name and server name which I can use to discover the other components of a distributed application.
    The problem :
    When I run the query Select * from SMS_SCI_SiteDefinition I get a generic error 0x80041001.
    More Information reveals the following:
    error description : " Unable to load site control file "
    error code : " 2160198400 (0x80c20300) "
    file name : " c:\qfe\nts_sms_fre\sms\siteserver\sdk_provider\smsprov\sspsitecontrolextractor.cpp "
    Now, I cannot find the QFE folder anywhere. The SCCM Site is working fine and the site_control_manager component has no errors. I can launch the SCCM console on that server without any errors and the site status messages do not contain any errors.
    Can someone please help me out with "detecting" an installed instance of SCCM site server using WMI? Is the above error cause for worry for the SCCM part of my brain?
    Thanks in advance for your guidance!

    Thanks for your response Don!
    The SMS_Site instance does not provide information of the database server and database name.
    The funny thing is when I browse use wbemtest to connect to root\SMS\site_XXX and enumerate classes, i do not find
    the SMS_SCI_SiteDefinition. 
    I find it when i enumerate recursively and can browse into the values. I'm not sure how could build a query against this now.
    Can anybody with a test instance of SCCM 2007 check this and let me know please?
    Everything you are looking for exist within WMI. You can use the documentation script as an example to get what you are looking for.
    http://www.enhansoft.com/pages/downloads.aspx
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Error while playing sound file in Applet

    Hi!!
    I am trying to play sound file in the applet which produces sound continuously, when it goes above certain set value. When i run the sound file individually it runs perfectly fine but when i try to call that class in diff. program its giving me some security error..i am trying to solve this problem from last so many days..i dont know whether i have to make some change in Security file policy or java policy..the error is like..
    java.security.AccessControlException: access denied (java.util.PropertyPermissio
    n user.dir read)
    at java.security.AccessControlContext.checkPermission(AccessControlConte
    xt.java:269)
    at java.security.AccessController.checkPermission(AccessController.java:
    401)
    at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
    at java.lang.SecurityManager.checkPropertyAccess(SecurityManager.java:12
    76)
    at java.lang.System.getProperty(System.java:573)
    at SoundApplication.startLoadingSounds(SoundApplication.java:52)
    at SoundApplication.<init>(SoundApplication.java:42)
    at TempSet.actionPerformed(TempSet.java:103)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:17
    86)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstra
    ctButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
    .java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonL
    istener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Please suggest some solution for this..its kinda urgent..
    Thanks in advance.
    Regards,
    Amish

    Are you loading your Applet from a webserver? You could make the sound file available through the same webserver.
    Alternatively, you could package the sound with the code in a JAR. It does mean a bigger download for your Applet users though, but the Applet would be able to access the file quickly.
    If you put your file in the JAR, say in /sound/myfile.ext , then you can get access to it from your code like this:
    URL soundURL = getClass().getResource( " /sound/myfile.ext" );

  • How do you open/play a .wav file (music file) without play sound file .vi

    I am having big problems to create a music background for my project. I am newbie using labview and maybe my questions is not so dificult to solve (I hope so)
    I was using play sound file vi but the problem is that I dont want the music file start automatically. I wanna control the start time using a button. I tried include a sound output stop but when the app start and I add more wav files in my vi, the sound file start, then stop abruptally because the stop vi and the everything is normal. I would like to eliminate that error.
    Someone have any idea, maybe using open file or another way. 
    Thanks in advance
    I add a screenshot of my vi and also the vi in this post
    Attachments:
    test sound.vi ‏11 KB

    I leave an example that can provide, use it in your program
    Atom
    Certified LabVIEW Associate Developer
    Attachments:
    playsound.zip ‏58 KB

  • Unable to load performance pack. Using Java I/O instead. Please ensure...

    Hi there.
    I am running WL 1033 development version using 64-bit 1.6.1 jdk (jdk-6u21-windows-x64) and the performance is terrible. I have upped my mem settings to this:
    set MEM_ARGS=-Xms1024m -Xmx1408m -XX:PermSize=1024m -XX:MaxPermSize=1024m
    and after a couple of deploys, I still get out of memory errors.
    I notice this message on startup: <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that wlntio.dll is in:
    Could this be part of my performace issues? If so, how do I fix it?
    I followed the install directions in the README.txt file from this zip file: wls1033_dev.zip
    Mike

    Hi Mike,
    If you are using 64 bit of Windows Operating System then Make sure that you add the following directory in the *"java.library.path"*....
    Directory: E:\bea1033\wlserver_10.3\server\native\win\64
    Example: In your servers start Script please add the following MEM_ARGS or in JAVA_OPTIONS:
    <b><font color=maroon>
    set MEM_ARGS= -Xms1024m -Xmx1408m -XX:PermSize=1024m -XX:MaxPermSize=1024m -Djava.library.path=E:\bea1033\wlserver_10.3\server\native\win\64</font></b>
    Thanks
    Jay SenSharma
    http://middlewaremagic.com/weblogic (Middleware Magic Is Here)

  • O2cb_ctl : unable to load cluster configuration file while  RAC setup.

    OCFS2: unable to load cluster configuration file
    Hi,
    I installed OCFS2 successfully.
    I successfully install 3 RPMs.
    I am getting error while running ocfs2console to do cluster configuration.
    I tried to run this manully using "o2cb_ctl -C -n NODENAME -t node -a number=NODENUM -a ip_address=IPADDR -a ip_port=IPPORT -a cluster=CLUSTERNAME "
    this commnd. but getting error as
    "o2cb_ctl: Unable to access cluster service while creating node Could not add node "
    Then I edited this file manually and copied to another nodes using SCP. Then tried to use o2cg_ctl utility as
    # /etc/init.d/o2cb offline ocfs2
    # /etc/init.d/o2cb unload
    # /etc/init.d/o2cb configure
    Configuring the O2CB driver.
    Next, I configure /etc/ocfs2/cluster.conf:
    cluster:
    node_count = 2
    name = oracle
    node:
    ip_port = 7777
    ip_address = 140.187.222.222
    number = 1
    name = ocvmrh2053
    cluster = oracle
    node:
    ip_port = 7777
    ip_address = 140.187.222.222
    number = 2
    name = ocvmrh2051
    cluster = oracle
    Next, I try to load ocfs2 modules by command: o2cb load - everything messages is OK
    And I try switch ocfs2 cluster to online (by o2cb online oracle), write this error message:
    Starting cluster oracle: Failed
    o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
    Stopping cluster oracle: Failed
    o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
    I think both errors i get are due to same issue. Please kindly reply if anyone having idea.
    Thanks.
    Please anyone can help me to resolve this.
    Message was edited by:
    user596035

    provide output of this command from all OCFS2 nodes:
    ls -l /etc/ocfs2/cluster.conf
    Regards,
    Martin

  • Interactive play sound file.vi crashs labview

    While playing with a *.wav file to perform an FFT on the data, I tried running this VI. Labview then crashes. No error.

    Which version of LabVIEW are you using?  I'm using LabVIEW 2011 SP1, and I ran the "Interactive Play Sound File.vi" from the example finder and the VI worked for me.  
    Are you just trying to play a sound file in your own VI?  If so, the DLL library call from the example could be causing the crash.  It could also be that your program isn't crashing, but just terminating before your sound file has a chance to play.
    There is an easier way to play a sound file, just use the "Play Sound File.vi".  You may also need to use the "Sound Output Wait.vi" to prevent your LabVIEW program from terminating before the sound has a chance to play.  I've attached a picture of the setup I'm refering to.
    Product Support Engineer
    National Instruments
    Attachments:
    sound_snippet.png ‏14 KB

  • How to import and play sound file from mxl link?

    I need to load different sound files dependent on which link you previously clicked in my app, but cannot figure out how to call the link to the sound file from my mxl file:
    <carRace>http://www.unisux.org/zik-car/lamborghini-diablo-gtr_standing-start.mp3</carRace>
    Can someone tell me what I am doing wrong in this code?
    <fx:Script>
       <![CDATA[
                                            private var req:URLRequest;
                                            private var context:SoundLoaderContext = new SoundLoaderContext(1000);
                                            private var bCall:Sound;
                                            private var bSong:Sound;
      private function playSong():void
                                                      var urlSong:String = "{carRace}";
                                                      var request:URLRequest = new URLRequest(urlSong);
                                                      bSong = new Sound(request, context);
                                                      bSong.play();
      ]]>
    </fx:Script>
    because this code does work:
    <fx:Script>
       <![CDATA[
      private var req:URLRequest;
      private var context:SoundLoaderContext = new SoundLoaderContext(1000);
      private var bCall:Sound;
      private var bSong:Sound;
      private function playSong():void
      var urlSong:String = "http://www.unisux.org/zik-car/lamborghini-diablo-gtr_standing-start.mp3";
                                                      var request:URLRequest = new URLRequest(urlSong);
                                                      bSong = new Sound(request, context);
                                                      bSong.play();
      ]]>
    </fx:Script>

    Visit: http://www.tools.de/solaris/
    you will love sound/audio programming.... source available.

  • Error BEA-000438 - Unable to load performance pack. Using Java I/O instead.

    On a Solaris 9 machime, 64 bits architecture, j2sdk1.4.2_08, Weblogic Server 8.1 SP2
              when I try to deploy the application, launching java wiht "-d64" option I get :
              <Jun 22, 2005 12:12:41 PM CEST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead.
              Please ensure that libmuxer library is in
              :'/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9/server:/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9:/export/home/Aplics/Apl1/WEB-INF/lib::/usr/local/bea/weblogic81/server/lib/solaris:/usr/local/bea/weblogic81/server/lib/solaris/oci920_8:/usr/lib'
              libmuxer exist on /usr/local/bea/weblogic81/server/lib/solaris
              Any idea?
              Thanks

              Can you post more details ?
              Sergi
              Jiffy <[email protected]> wrote:
              >error:
              > <2004-3-12 %u4E0B%u534815%u65F648%u520654%u79D2 CST> <Error> <Socket>
              ><BEA-000438> <Unable to load performance pack. Using Java I/O instead.
              >Please ensure that wlntio.dll is in: 'D:D:/bea/weblogic81/server/bin'
              >>
              

  • Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

    Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

    Hi,
    Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
    Thanks,
    Shakti K

  • Issue while loading a csv file using sql*loader...

    Hi,
    I am loading a csv file using sql*loader.
    On the number columns where there is data populated in them, decimal number/integers, the row errors out on the error -
    ORA-01722: invalid number
    I tried checking the value picking from the excel,
    and found the chr(13),chr(32),chr(10) values characters on the value.
    ex: select length('0.21') from dual is giving a value of 7.
    When i checked each character as
    select ascii(substr('0.21',5,1) from dual is returning a value 9...etc.
    I tried the following command....
    "to_number(trim(replace(replace(replace(replace(:std_cost_price_scala,chr(9),''),chr(32),''),chr(13),''),chr(10),'')))",
    to remove all the non-number special characters. But still facing the error.
    Please let me know, any solution for this error.
    Thanks in advance.
    Kiran

    control file:
    OPTIONS (ROWS=1, ERRORS=10000)
    LOAD DATA
    CHARACTERSET WE8ISO8859P1
    INFILE '$Xx_TOP/bin/ITEMS.csv'
    APPEND INTO TABLE XXINF.ITEMS_STAGE
    FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
    ItemNum                    "trim(replace(replace(:ItemNum,chr(9),''),chr(13),''))",
    cross_ref_old_item_num               "trim(replace(replace(:cross_ref_old_item_num,chr(9),''),chr(13),''))",
    Mas_description               "trim(replace(replace(:Mas_description,chr(9),''),chr(13),''))",
    Mas_long_description               "trim(replace(replace(:Mas_long_description,chr(9),''),chr(13),''))",
    Org_description               "trim(replace(replace(:Org_description,chr(9),''),chr(13),''))",
    Org_long_description               "trim(replace(replace(:Org_long_description,chr(9),''),chr(13),''))",
    user_item_type                    "trim(replace(replace(:user_item_type,chr(9),''),chr(13),''))",
    organization_code               "trim(replace(replace(:organization_code,chr(9),''),chr(13),''))",
    primary_uom_code               "trim(replace(replace(:primary_uom_code,chr(9),''),chr(13),''))",
    inv_default_item_status          "trim(replace(replace(:inv_default_item_status,chr(9),''),chr(13),''))",
    inventory_item_flag               "trim(replace(replace(:inventory_item_flag,chr(9),''),chr(13),''))",
    stock_enabled_flag               "trim(replace(replace(:stock_enabled_flag,chr(9),''),chr(13),''))",
    mtl_transactions_enabled_flag          "trim(replace(replace(:mtl_transactions_enabled_flag,chr(9),''),chr(13),''))",
    revision_qty_control_code          "trim(replace(replace(:revision_qty_control_code,chr(9),''),chr(13),''))",
    reservable_type               "trim(replace(replace(:reservable_type,chr(9),''),chr(13),''))",
    check_shortages_flag               "trim(replace(replace(:check_shortages_flag,chr(9),''),chr(13),''))",
    shelf_life_code               "trim(replace(replace(replace(replace(:shelf_life_code,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    shelf_life_days               "trim(replace(replace(replace(replace(:shelf_life_days,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    lot_control_code               "trim(replace(replace(:lot_control_code,chr(9),''),chr(13),''))",
    auto_lot_alpha_prefix               "trim(replace(replace(:auto_lot_alpha_prefix,chr(9),''),chr(13),''))",
    start_auto_lot_number               "trim(replace(replace(:start_auto_lot_number,chr(9),''),chr(13),''))",
    negative_measurement_error          "trim(replace(replace(replace(replace(:negative_measurement_error,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    positive_measurement_error          "trim(replace(replace(replace(replace(:positive_measurement_error,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    serial_number_control_code          "trim(replace(replace(:serial_number_control_code,chr(9),''),chr(13),''))",
    auto_serial_alpha_prefix          "trim(replace(replace(:auto_serial_alpha_prefix,chr(9),''),chr(13),''))",
    start_auto_serial_number          "trim(replace(replace(:start_auto_serial_number,chr(9),''),chr(13),''))",
    location_control_code               "trim(replace(replace(:location_control_code,chr(9),''),chr(13),''))",
    restrict_subinventories_code          "trim(replace(replace(:restrict_subinventories_code,chr(9),''),chr(13),''))",
    restrict_locators_code               "trim(replace(replace(:restrict_locators_code,chr(9),''),chr(13),''))",
    bom_enabled_flag               "trim(replace(replace(:bom_enabled_flag,chr(9),''),chr(13),''))",
    costing_enabled_flag               "trim(replace(replace(:costing_enabled_flag,chr(9),''),chr(13),''))",
    inventory_asset_flag               "trim(replace(replace(:inventory_asset_flag,chr(9),''),chr(13),''))",
    default_include_in_rollup_flag          "trim(replace(replace(:default_include_in_rollup_flag,chr(9),''),chr(13),''))",
    cost_of_goods_sold_account          "trim(replace(replace(:cost_of_goods_sold_account,chr(9),''),chr(13),''))",
    std_lot_size                    "trim(replace(replace(replace(replace(:std_lot_size,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    sales_account                    "trim(replace(replace(:sales_account,chr(9),''),chr(13),''))",
    purchasing_item_flag               "trim(replace(replace(:purchasing_item_flag,chr(9),''),chr(13),''))",
    purchasing_enabled_flag          "trim(replace(replace(:purchasing_enabled_flag,chr(9),''),chr(13),''))",
    must_use_approved_vendor_flag          "trim(replace(replace(:must_use_approved_vendor_flag,chr(9),''),chr(13),''))",
    allow_item_desc_update_flag          "trim(replace(replace(:allow_item_desc_update_flag,chr(9),''),chr(13),''))",
    rfq_required_flag               "trim(replace(replace(:rfq_required_flag,chr(9),''),chr(13),''))",
    buyer_name                    "trim(replace(replace(:buyer_name,chr(9),''),chr(13),''))",
    list_price_per_unit               "trim(replace(replace(replace(replace(:list_price_per_unit,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    taxable_flag                    "trim(replace(replace(:taxable_flag,chr(9),''),chr(13),''))",
    purchasing_tax_code               "trim(replace(replace(:purchasing_tax_code,chr(9),''),chr(13),''))",
    receipt_required_flag               "trim(replace(replace(:receipt_required_flag,chr(9),''),chr(13),''))",
    inspection_required_flag          "trim(replace(replace(:inspection_required_flag,chr(9),''),chr(13),''))",
    price_tolerance_percent          "trim(replace(replace(replace(replace(:price_tolerance_percent,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    expense_account               "trim(replace(replace(:expense_account,chr(9),''),chr(13),''))",
    allow_substitute_receipts_flag          "trim(replace(replace(:allow_substitute_receipts_flag,chr(9),''),chr(13),''))",
    allow_unordered_receipts_flag          "trim(replace(replace(:allow_unordered_receipts_flag,chr(9),''),chr(13),''))",
    receiving_routing_code               "trim(replace(replace(:receiving_routing_code,chr(9),''),chr(13),''))",
    inventory_planning_code          "trim(replace(replace(:inventory_planning_code,chr(9),''),chr(13),''))",
    min_minmax_quantity               "trim(replace(replace(replace(replace(:min_minmax_quantity,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    max_minmax_quantity               "trim(replace(replace(replace(replace(:max_minmax_quantity,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    planning_make_buy_code               "trim(replace(replace(:planning_make_buy_code,chr(9),''),chr(13),''))",
    source_type                    "trim(replace(replace(:source_type,chr(9),''),chr(13),''))",
    mrp_safety_stock_code               "trim(replace(replace(:mrp_safety_stock_code,chr(9),''),chr(13),''))",
    material_cost                    "trim(replace(replace(:material_cost,chr(9),''),chr(13),''))",
    mrp_planning_code               "trim(replace(replace(:mrp_planning_code,chr(9),''),chr(13),''))",
    customer_order_enabled_flag          "trim(replace(replace(:customer_order_enabled_flag,chr(9),''),chr(13),''))",
    customer_order_flag               "trim(replace(replace(:customer_order_flag,chr(9),''),chr(13),''))",
    shippable_item_flag               "trim(replace(replace(:shippable_item_flag,chr(9),''),chr(13),''))",
    internal_order_flag               "trim(replace(replace(:internal_order_flag,chr(9),''),chr(13),''))",
    internal_order_enabled_flag          "trim(replace(replace(:internal_order_enabled_flag,chr(9),''),chr(13),''))",
    invoice_enabled_flag               "trim(replace(replace(:invoice_enabled_flag,chr(9),''),chr(13),''))",
    invoiceable_item_flag               "trim(replace(replace(:invoiceable_item_flag,chr(9),''),chr(13),''))",
    cross_ref_ean_code               "trim(replace(replace(:cross_ref_ean_code,chr(9),''),chr(13),''))",
    category_set_intrastat               "trim(replace(replace(:category_set_intrastat,chr(9),''),chr(13),''))",
    CustomCode                    "trim(replace(replace(:CustomCode,chr(9),''),chr(13),''))",
    net_weight                    "trim(replace(replace(replace(replace(:net_weight,chr(9),''),chr(13),''),chr(32),''),chr(10),''))",
    production_speed               "trim(replace(replace(:production_speed,chr(9),''),chr(13),''))",
    LABEL                         "trim(replace(replace(:LABEL,chr(9),''),chr(13),''))",
    comment1_org_level               "trim(replace(replace(:comment1_org_level,chr(9),''),chr(13),''))",
    comment2_org_level               "trim(replace(replace(:comment2_org_level,chr(9),''),chr(13),''))",
    std_cost_price_scala               "to_number(trim(replace(replace(replace(replace(:std_cost_price_scala,chr(9),''),chr(32),''),chr(13),''),chr(10),'')))",
    supply_type                    "trim(replace(replace(:supply_type,chr(9),''),chr(13),''))",
    subinventory_code               "trim(replace(replace(:subinventory_code,chr(9),''),chr(13),''))",
    preprocessing_lead_time          "trim(replace(replace(replace(replace(:preprocessing_lead_time,chr(9),''),chr(32),''),chr(13),''),chr(10),''))",
    processing_lead_time                "trim(replace(replace(replace(replace(:processing_lead_time,chr(9),''),chr(32),''),chr(13),''),chr(10),''))",
    wip_supply_locator               "trim(replace(replace(:wip_supply_locator,chr(9),''),chr(13),''))"
    Sample data from csv file.
    "9901-0001-35","390000","JMKL16 Pipe bend 16 mm","","JMKL16 Putkikaari 16 mm","","AI","FJE","Ea","","","","","","","","","","","","","","","","","","","","","","","","","21-21100-22200-00000-00000-00-00000-00000","0","21-11100-22110-00000-00000-00-00000-00000","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","0.1","Pull","AFTER PROD","","","Locator for Production"
    The load errors out on especially two columns :
    1) std_cost_price_scala
    2) list_price_per_unit
    both are number columns.
    And when there is data being provided on them. It errors out. But, if they are holding null values, the records go through fine.
    Message was edited by:
    KK28

Maybe you are looking for