Unable to load Site Control File

Hello,
The background :
I am in the process of learning how to create a Management Pack for a distributed application in SCOM 2012 R2.</p><p>For this, I picked our SCCM Site server to use as an example. So, in short, am writing a management pack for SCCM 2007 Discovery.
I know a management pack might already exist. I am trying to learn by using an architecture I'm familiar with so I need to create this from scratch.
In order to discover SCCM Site installed on a server, I decided to use the SMS WMI namespace. By reading the
SMS_ProviderLocation Instance, I am able to detect if the server has SCCM Site installed on it.
My next step was to find out where the SMS database is hosted. I found
ROOT\SMS\site_ABC\ namespace contains an instance of SMS_SCI_SiteDefinition where I can find the database name and server name which I can use to discover the other components of a distributed application.
The problem :
When I run the query Select * from SMS_SCI_SiteDefinition I get a generic error 0x80041001.
More Information reveals the following:
error description : " Unable to load site control file "
error code : " 2160198400 (0x80c20300) "
file name : " c:\qfe\nts_sms_fre\sms\siteserver\sdk_provider\smsprov\sspsitecontrolextractor.cpp "
Now, I cannot find the QFE folder anywhere. The SCCM Site is working fine and the site_control_manager component has no errors. I can launch the SCCM console on that server without any errors and the site status messages do not contain any errors.
Can someone please help me out with "detecting" an installed instance of SCCM site server using WMI? Is the above error cause for worry for the SCCM part of my brain?
Thanks in advance for your guidance!

Thanks for your response Don!
The SMS_Site instance does not provide information of the database server and database name.
The funny thing is when I browse use wbemtest to connect to root\SMS\site_XXX and enumerate classes, i do not find
the SMS_SCI_SiteDefinition.
I find it when i enumerate recursively and can browse into the values. I'm not sure how could build a query against this now.
Can anybody with a test instance of SCCM 2007 check this and let me know please?
Everything you are looking for exist within WMI. You can use the documentation script as an example to get what you are looking for.
http://www.enhansoft.com/pages/downloads.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

LMS 4.1 error unable to load the MIB file

when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI
I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my
Thank

The following thread has RFC-1212.my in it. You can downlaod from there :
https://supportforums.cisco.com/thread/174886
Mostly all the Cisco MIB will be available @ :
ftp://ftp.cisco.com/pub/mibs/v1/ OR ftp://ftp.cisco.com/pub/mibs/v2/
The above you requested are non-cisco mib, which can be extracted either from RFC or they canbe found in some univerisites FTP or some free sites like oidview :
http://www.oidview.com/mibs/detail.html
-Thanks
Vinod

Unable to Load Portable Collection File

Hello, I created a Portable Collector and am trying to load this file into my Zenworks 7.5 (R12) but I keep getting the following error message when I use the wizard to import it:
"There were problems loading 1 workstation inventory files. For details, refer to the Manager event log or the error log file from which you loaded data."
I'm not sure where the Manager event log is nor the error log file that they're referring to. I checked the application and system event logs in MS event viewer but that showed nothing. I resorted to checking the install path event logs and found this in TSCMgrEvent20080617.log:
<EVENT AT="6/17/2008 8:53:55 PM" SEVERITY="Info">
Application Object Info at 6/17/2008 8:53:55 PM on KCAMOM09 by KCAMOM09
Object Deleted
[2.4.100] The object was deleted by another user or process.
Class:"Collection Server"
Name:"KCAMOM09"
Database Persistence Layer Info in CDBPersister::Retrieve at 6/17/2008 8:53:55 PM
Object Deleted
[2.5.9] was deleted by another user.
</EVENT>
<EVENT AT="6/17/2008 8:53:55 PM" SEVERITY="Warning">
ZENworks Asset Management Manager Warning at 6/17/2008 8:53:55 PM on KCAMOM09 by KCAMOM09
Load Portable Collection Failure
[2.8.100] Unable to load workstation inventory file: c:\91DA8A7A-FA60-47D4-9D9D-C8B5CB322DB1.wif.
</EVENT>
I check the inventory from the web console and the computer isn't even listed there. Can anyone shed any light? I've searched the forums and the KB and found nothing at all. I need to get this portable collector up by this weekend...any help would be greatly appreciated!
- Tommy

A couple of things... first, you MUST load a Portable Collection using the same Collection Server as created the Portable Collector. Second, it sounds very much like somehow your Portable.Ini has gotten dinged. That's not a file you can simply edit and save; if you try, ZAM will stop working. It needs to be updated in the File Store before it'll be accepted. That's a security measure to prevent outside influences from altering that file (as others) for nefarious purposes.
Please contact Novell Technical Support and tell them that your Portable.Ini needs to be replaced. They'll send you a good copy of Portable.Ini and set you up with UpdateFS, which will register the good copy in your FileStore.
Another possibility... are you running Oracle instead of MSSQL? It's possible that one or more filenames in the File Store are out of sync with their names in the DB. Oracle being case-sensitive, that's very very easy to do. Again, Novell Technical Support can help you through fixing it if it's true. It's not something that can be simply remedied by oneself.
-- Tim --
Originally Posted by tommytu
I've tried creating a portable collector from the same machine and it seems to not work after installing IR12.
I get the same message if I try to use a portable collector creating from another server (but changing the collectionserverOID in CPS.ini). Will this work? is there something else I have to change?
I've noticed that when I create the portable collector, I only get the following files:
checkpath.exe
collect.bat
coptset.kb
cps.ini
disk1.tsz (4.4 megs)
end.bat
fec.kb
findst.exe
ignore.dat
lastprog.dsk
logappnd.exe
pextract.exe
setcwd.tem
spacew32.exe
udf.kb
zamstr.bat
When I run this collector, I get a "COLLECT2.BAT is not recognized as an internal or external command."
The collector that works has a bunch of other files including collect2.bat
Any ideas?

The master site control file does not contain a component item for SMS_STATUS_MANAGER.

New to the System Center world. We are using a fresh install of Server 2012 R2 and System Center R2 with everything working until Server 2012 R2 Update 1 was installed. Now we are getting the following:
Site type: Primary Site or CAS SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
Resolved the "Status Manager" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Resolved the "Site Control Manager (Master Site Control File)" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Parsed the master site control file, serial number 1551209029.
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
This site is the central site. SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
ERROR: The master site control file does not contain a component item for SMS_STATUS_MANAGER.
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Sleeping for 60 seconds... SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
Any thoughts on how to fix this? Seen a few references to a "site reset" for SCCM 2007 but wanted to make sure there wasn't anything else to try before heading down that road with 2012R2.

A site reset can also be done in CM12 so it's worth a try.
Torsten Meringer | http://www.mssccmfaq.de

SQL Loader and control file changes for different users

In the front end of my application I can select a data file and a control file, and load data to the table mentioned in .ctl file. Every user who logs in uses the same .ctl file and so loads onto the same table. Now I want the user to load data onto the table in his own schema. I can get the username of the user currently logged in and i want to insert it into that username.table. So can i copy the contents of the .ctl file into a variable, modify it into username.table in that string and pass that variable as a parameter to the sqlldr command instead of the .ctl file.
Or is there a better way how I can modify the same control file everytime to change tablename to username.tablename in .ctl file and pass to sqlldr to load data to table in local user schema table.
Thanks and Regards

Thanks for the reply .. user do have their user credentials but only for the application ... but all users use a common loader and control file once they log into the application. So irrespective of which user is logged in he selects the same control file and loads to the same table mentioned in the control file .. i instead want user to be able to load to the table in control file but into his schema like username.tablename instead of just the tablename mentioned in .ctl file.

O2cb_ctl : unable to load cluster configuration file while RAC setup.

OCFS2: unable to load cluster configuration file
Hi,
I installed OCFS2 successfully.
I successfully install 3 RPMs.
I am getting error while running ocfs2console to do cluster configuration.
I tried to run this manully using "o2cb_ctl -C -n NODENAME -t node -a number=NODENUM -a ip_address=IPADDR -a ip_port=IPPORT -a cluster=CLUSTERNAME "
this commnd. but getting error as
"o2cb_ctl: Unable to access cluster service while creating node Could not add node "
Then I edited this file manually and copied to another nodes using SCP. Then tried to use o2cg_ctl utility as
# /etc/init.d/o2cb offline ocfs2
# /etc/init.d/o2cb unload
# /etc/init.d/o2cb configure
Configuring the O2CB driver.
Next, I configure /etc/ocfs2/cluster.conf:
cluster:
node_count = 2
name = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 1
name = ocvmrh2053
cluster = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 2
name = ocvmrh2051
cluster = oracle
Next, I try to load ocfs2 modules by command: o2cb load - everything messages is OK
And I try switch ocfs2 cluster to online (by o2cb online oracle), write this error message:
Starting cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
Stopping cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
I think both errors i get are due to same issue. Please kindly reply if anyone having idea.
Thanks.
Please anyone can help me to resolve this.
Message was edited by:
user596035

provide output of this command from all OCFS2 nodes:
ls -l /etc/ocfs2/cluster.conf
Regards,
Martin

301 unable to load plugin"controls" url'flowplayer.controls-32.13.swf What is this and how to reapair this?

301 unable to load plugin"controls" url'flowplayer.controls-32.13.swf What is this and how to reapair this?
I have no idea what to do.

Probably because "latin-9" doesn't exist?
# nano /usr/share/X11/xkb/symbols/fr
xkb_symbols "latin9" {
include "latin"
include "nbsp(level3)"
name[Group1]="French (legacy, alternative)";
key <TLDE> { [ oe, OE, leftdoublequotemark, rightdoublequotemark ] };
key <AE01> { [ ampersand, 1, dead_acute, periodcentered ] };
key <AE02> { [ eacute, 2, asciitilde, Eacute ] };
Try it without the dash (without the "-").
And don't forget to mark it as solved (by editing the first post).

Secondary Site install - Site Control File is invalid

I have installed 9 secondary sites successfully and without issue. My tenth however is not going as well.
The bootstrap.pkg made it there and the install shows as completed however reviewing sitecomp.log on the secondary site shows the following:
Publish Servers in Active Directory. SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Processing forest mydomain.com. SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
No publishing account defined for this forest, will use the machine account instead. SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
   DS Root:DC=mydomain,DC=com SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
   Searching for the System Management Container. SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
   LDAP://CN=System Management,CN=System,DC=mydomain,DC=com container exists. SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
No Fallback Status Point installed on the Site SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Size of Signing Certificate: 0 SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Signing Certificate: SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Failed to get top level site code SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Not able to get [MIF Collection] settings. SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Failed to get top level site code SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Current copy of the Site Control File is invalid. Not able to read SMS_SITE_COMPONENT_MANAGER section of sitecontrol file of top level site. SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
Waiting for changes to the "D:\SCCM\inboxes\sitectrl.box" or "D:\SCCM\inboxes\sitecomp.box" directories, servers will be polled in 1 hour... SMS_SITE_COMPONENT_MANAGER 3/15/2013 1:09:59 PM 2252 (0x08CC)
I have tried restarting the services and rebooting the server altogether and still hangs here. Any ideas before I wipe it and start over?
Thanks!

So the site just changed from Pending to Active in the admin console. Might be my OCD not waiting long enough. :-| I will continue to monitor and see if it completes the process. If all goes through, taking significantly longer that the
other 9 site installs..

Unable to load MTS (AVCHD) file

I just installed Adobe Premiere Elements 12.
When I try to imort ( load) a AVCD (.MTS) file from my HD , I receive an error message :
'unable to open the file , missing Codec '.
Can someone help me how I can import these kind of files ?? ( saved on my harddisk) .
Thanks

Hello ,
The JVC model is possible only available in Europe ??
I do recording in AVCHD compression ( wich is the standard fort his camera ) always with a filename .MTS
The recorded frame saize is 1920 x 1080 at 50fps ( european standard ).
I have transferred one file (.MTS) into my C-drive - same result !! the programm says that i have a missing codec .
Apple quicktime version 7.7 ( latest) is running …
On the thubnail in the folder panel within premiere elements , I see a green screen with some flickering on top of the thubnail.
Can You help me ??
Thanks a lot,
Rgds,
Mike.
Van: A.T. Romano [email protected]
Verzonden: donderdag 7 november 2013 15:41
Aan: mike devos
Onderwerp: Unable to load MTS (AVCHD) file
Re: Unable to load MTS (AVCHD) file
created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <http://forums.adobe.com/message/5822968#5822968

Unable to load/play sound files using SoundEngine_LoadEffect

Hi All,
I am able to load/play sound files using SoundEngine_LoadBackgroundMusicTrack but unable to load/play sound files using SoundEngine_LoadEffect on iPhone Simulator. I am using the SoundEngine.h/cpp from Crash Landing. Oddly enough sound effects load and play succesffully when i start the app with 'Start with Performance Tool'. Does anyone know what is actually going on.
Also i would like to know what is the difference between playing sound files using these two methods. What are the restrictions on individual sound file types for each method.
Thanks

I was able to load/run the sound effects after using Simulator - iPhoneOS 2.1 in the Active Target/Build drop down on Xcode toolbar. Both Active SDK, and Active Executable should be 2.1 in order to play the sound effects.

SQL Loader and control file

I know I've done this before but, I don't use SQL Loader often and I'm having issues getting a file to load.
The table has 6 columns in it - one of which is a timestamp.
I was having issues loading it initially with date format issues. I ruled out any issues with the timestamp format by simply loading a dummy table with some timestamp based data and had no issue.
So - I think the issue is around the fact that the table I'm loading's first column being a value I'm attempting to default with a sequence when loading and - that I'm screwing up something there.
Table is as such:
CREATE TABLE ACS_IPS
    (seq_ips NUMBER,
    col2   VARCHAR2(100),
    col3 VARCHAR2(100),
    col4    VARCHAR2(100),
    col5 TIMESTAMP,
    col6    VARCHAR2(100),
    col7    VARCHAR2(100),
    col8 DATE DEFAULT SYSDATE NOT NULL,
    col9 VARCHAR2(30) DEFAULT USER);The control file is:
load data
truncate
into table acs_ips
fields terminated by ","
trailing nullcols
    seq_ips "seq_ips.nextval",
    col2,
    col3,
    col4,
    col5 TIMESTAMP "YYYY-MM-DD HH24:MI:SS.FF9",
    col6,
    col7
    )The sequence column isn't in the file being loaded... and - there are additional columns that are defaulted on the table that aren't in the control file.
Any help is appreciated... The error I'm getting is:
Rejected - Error on table CAMS.ACS_IPS, column ACTION_START.
ORA-01841: (full) year must be between -4713 and +9999, and not be 0

Yeah - not sure that clears it up...
The sequence in my table is the first column - and - I think that's the problem... the sequence is being loaded as the first column in the control file but - it's not in the file being loaded so - it's skewing (again - I think??) the data being read in - which is why I'm getting the timestamp issues on the one column (it's actually reading the next column in the file vs. the actual timestamp one).
If that's the issue - I'm not sure how to avoid it without restructuring the table to stick the sequence physically at the end. I'm certain that's not necessary and - I'm overlooking something that's otherwise simple but evading me.

SQL Loader and control files with WHEN clauses

Hi All :)
Want to load data into 3 tables that are defined like so:
SQL> desc PARENT
Name NULL? Type
PKey.........NOT NULL....Number
Blah_One.................VARHCAR2(50)
Blah_Two.................VARHCAR2(50)
SQL> desc CHILD_ONE
Name NULL? Type
PKey.........NOT NULL....Number
FKey.....................Number -- this is used as a Foriegn key to PARNET
Bleep_One................VARHCAR2(50)
SQL> desc CHILD_TWO
Name NULL? Type
PKey.........NOT NULL....Number
FKey.....................Number -- this is used as a Foriegn key to PARNET
Bleep_Two................VARHCAR2(50)
I have a flat file that looks like this
PARENT|BLAHBLAH|Blahba|
ONE|BLEEP-IT|
ONE|BLEEP-BLOP|
TWO|TWOBLEEP|
TWO|OR NOT TO|
TWO|BLEEP
PARENT|AbbaDabaDooo|whaaaaa|
TWO|waka=waka|
.... so I worte a control file that looks like this ....
LOAD DATA
APPEND
INTO PARENT
WHEN (tableName='PARENT')
FIELDS TERMINATED BY '|' TRAILING NULLCOLS
tableName FILLER,
BLAH_ONE,
BLAH_TWO,
PKey "PARENT_SEQ.nextval"
INTO CHILD_ONE
WHEN (tableName='ONE')
FIELDS TERMINATED BY '|' TRAILING NULLCOLS
tableName FILLER,
BLEEP_ONE,
PKey "CHILD_ONE_SEQ.nextval",
FKey "PARENT_SEQ.currval"
INTO CHILD_TWO
WHEN (tableName='TWO')
FIELDS TERMINATED BY '|' TRAILING NULLCOLS
tableName FILLER,
BLEEP_TWO,
PKey "CHILD_TWO_SEQ.nextval",
FKey "PARENT_SEQ.currval"
where PARENT_SEQ, CHILD_ONE, and CHILD_TWO
are SEQUENCES.
The probelm I am having is that the Fkeys and PKeys
don't match up????
Am I mis-using SEQUENCES?
Should I be using a trigger?
I am very confused!
Thanks

http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6020061915147
answers this question perfectly

Problem import csv file with SQL*loader and control file

I have a *csv file looking like this:
E0100070;EKKJ 1X10/10 1 KV;1;2003-06-16;01C;75
E0100075;EKKJ 1X10/10 1 KV;500;2003-06-16;01C;67
E0100440;EKKJ 2X2,5/2,5 1 KV;1;2003-06-16;01C;37,2
E0100445;EKKJ 2X2,5/2,5 1 KV;500;2003-06-16;01C;33,2
E0100450;EKKJ 2X4/4 1 KV;1;2003-06-16;01C;53
E0100455;EKKJ 2X4/4 1 KV;500;2003-06-16;01C;47,1
I want to import this csv file to this table:
create table artikel (artnr varchar2(10), namn varchar2(25), fp_storlek number, datum date, mtrlid varchar2(5), pris number);
My controlfile looks like this:
LOAD DATA
INFILE 'e:\test.csv'
INSERT
INTO TABLE ARTIKEL
FIELDS TERMINATED BY ';'
TRAILING NULLCOLS
(ARTNR, NAMN, FP_STORLEK char "to_number(:fp_storlek,'99999')", DATUM date 'yyyy-mm-dd', MTRLID, pris char "to_number(:pris,'999999D99')")
I cant get sql*loader to import the last column(pris) as I want. It ignore my decimal point which in this case is "," and not "." maybe this is the problem. If the decimal point is the problem how can I get oracle to recognize "," as a decimal point??
the result from the import now, is that a decimal number (37,2) becomes 372 in the table

Set NLS_NUMERIC_CHARACTERS environment variable at OS level, before running SqlLoader :
$ cat test.csv
E0100070;EKKJ 1X10/10 1 KV;1;2003-06-16;01C;75
E0100075;EKKJ 1X10/10 1 KV;500;2003-06-16;01C;67
E0100440;EKKJ 2X2,5/2,5 1 KV;1;2003-06-16;01C;37,2
E0100445;EKKJ 2X2,5/2,5 1 KV;500;2003-06-16;01C;33,2
E0100450;EKKJ 2X4/4 1 KV;1;2003-06-16;01C;53
E0100455;EKKJ 2X4/4 1 KV;500;2003-06-16;01C;47,1
$ cat artikel.ctl
LOAD DATA
INFILE 'test.csv'
replace
INTO TABLE ARTIKEL
FIELDS TERMINATED BY ';'
TRAILING NULLCOLS
(ARTNR, NAMN, FP_STORLEK char "to_number(:fp_storlek,'99999')", DATUM date 'yyyy-mm-dd', MTRLID, pris char "to_number(:pris,'999999D99')")
$ sqlldr scott/tiger control=artikel
SQL*Loader: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:01 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Commit point reached - logical record count 6
$ sqlplus scott/tiger
SQL*Plus: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:11 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from artikel;
ARTNR      NAMN                      FP_STORLEK DATUM      MTRLI       PRIS
E0100070   EKKJ 1X10/10 1 KV                  1 16/06/2003 01C           75
E0100075   EKKJ 1X10/10 1 KV                500 16/06/2003 01C           67
E0100440   EKKJ 2X2,5/2,5 1 KV                1 16/06/2003 01C          372
E0100445   EKKJ 2X2,5/2,5 1 KV              500 16/06/2003 01C          332
E0100450   EKKJ 2X4/4 1 KV                    1 16/06/2003 01C           53
E0100455   EKKJ 2X4/4 1 KV                  500 16/06/2003 01C          471
6 rows selected.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
$ export NLS_NUMERIC_CHARACTERS=',.'
$ sqlldr scott/tiger control=artikel
SQL*Loader: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:41 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Commit point reached - logical record count 6
$ sqlplus scott/tiger
SQL*Plus: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:45 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from artikel;
ARTNR      NAMN                      FP_STORLEK DATUM      MTRLI       PRIS
E0100070   EKKJ 1X10/10 1 KV                  1 16/06/2003 01C           75
E0100075   EKKJ 1X10/10 1 KV                500 16/06/2003 01C           67
E0100440   EKKJ 2X2,5/2,5 1 KV                1 16/06/2003 01C         37,2
E0100445   EKKJ 2X2,5/2,5 1 KV              500 16/06/2003 01C         33,2
E0100450   EKKJ 2X4/4 1 KV                    1 16/06/2003 01C           53
E0100455   EKKJ 2X4/4 1 KV                  500 16/06/2003 01C         47,1
6 rows selected.
SQL>                                                                            Control file is exactly as yours, I just put replace instead of insert.

Unable to crate new control file

Dear All,
I am going to refresh SANDBOX i want to create new control file but am am not able to create controlfile following is the mssage:
SP2-0310: unable to open file "control.sql"
Pls. guide me,
Regards,
Madhus

Hi,
Make sure that user ora<sid> is authorizate to read that file, so provide authorzation.
Command you run should looks like this one
./ora_br_copy.sh -generateFiles -forceLogSwitches -targetSid TRG -password secretb -listenerPort 1527
this is only example you should change TRG, secretb and port for listener.
Best regards,
Peter Nechala

FDMEE - unable to load an erronous file

Hello,
I created an HFM and FDMEE application.
I was able to load a flat file, whose dimensions' values were identical to the metadata.
I tried loading a file with values that are not in metadata, to see a validation report, but I keep getting this:
BLANK............. Line is blank or empty.
NN................ Non-Numeric, Amount field contains non numeric characters.
TC................ Type Conversion, Amount field could not be converted to a number.
ZP................ Zero Suppress, Amount field contains a 0 value and zero suppress is ON.
SKIP FIELD.............. SKIP field value was found
NULL ACCOUNT VALUE.............. Account Field is null
SKIP FROM SCRIPT.............. Skipped through Script
[TC] - [Amount=NN] L 0 1 0 8 1 4 0 1 4 0 , 1 1 1 0 1 0 0 0 , [ I C P N o n e ] , [ N o n e ] , [ N o n e ] , [ N o n e ] , B a s e , 2 0 0 0 0 0 0
[BLANK]
[TC] - [Amount=NN] L 0 1 0 8 1 4 0 1 4 0 , 4 2 0 0 1 1 0 1 , [ I C P N o n e ] , [ N o n e ] , l i l , [ N o n e ] , B a s e , - 2 0 0 0 0 0 0
Rows Loaded: 0
Rows Rejected: 3
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- ARCHIVE MODE: null
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- Start archiving file:
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- Archive file name: 6720141231.txt
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- Deleting the source file: Testload4.txt
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- File not deleted: \\Hfmap01\fdm\FRUTDEV\Testload4.txt
2015-03-11 13:03:35,945 INFO [AIF]: ERPI-105011:EPMERPI- ImportTextData - End
2015-03-11 13:03:35,945 INFO [AIF]: ERPI-105011:EPMERPI- Total time taken for the import in ms = 31
2015-03-11 13:03:36,085 INFO [AIF]:
Import Data from Source for Period 'Dec 2014'
2015-03-11 13:03:36,101 INFO [AIF]: Generic Data Rows Imported from Source: 0
2015-03-11 13:03:36,101 INFO [AIF]: Total Data Rows Imported from Source: 0
2015-03-11 13:03:36,990 INFO [AIF]:
Map Data for Period 'Dec 2014'
2015-03-11 13:03:37,006 ERROR [AIF]: Error: No records exist for Period 'Dec 2014'
2015-03-11 13:03:37,037 FATAL [AIF]: Error in CommMap.updateTDATASEG_T_TDATASEGW
Traceback (most recent call last):
File "<string>", line 1775, in updateTDATASEG_T_TDATASEGW
RuntimeError: Error: No records exist for Period 'Dec 2014'
2015-03-11 13:03:37,037 FATAL [AIF]: Error in CommMap.updateTDATASEG_T_TDATASEGW
Traceback (most recent call last):
File "<string>", line 1982, in updateTDATASEG_T_TDATASEGW
RuntimeError: [u"Error: No records exist for Period 'Dec 2014'"]
2015-03-11 13:03:37,115 FATAL [AIF]: Error in COMM Map Data
2015-03-11 13:03:37,115 INFO [AIF]: FDMEE Process End, Process ID: 67
Not sure what it means and how I can test the mapping.
Please advise..
Thanks
Laila

Thanks for the quick response.
The flat file I load contained 2 rows (it was a test load).
The correct file, that I was able to import, validate and export to HFM included these 2 rows:
L0108140140,11101000,[ICP None],[None],[None],[None],Base,2000000
L0108140140,42001101,[ICP None],[None],[None],[None],Base,-2000000
The erroneous file that I wasn't even able to import included these 2 rows:
L0108140140,11101000,[ICP None],[None],[None],[None],Base,2000000
L0108140140,42001101,[ICP None],[None],lil,[None],Base,-2000000
The only difference is in one of the dimensions lil instead of [None].
I wanted the system to show me that the value wasn't mapped so it cannot proceed in the export to HFM.
Any ideas?
Thanks.

Unable to load Site Control File

Similar Messages

Maybe you are looking for