Unable To Load Specific Project

Dear all,
I seriously need help here. I've been working on a project for a few weeks and just a day ago while i was halfway working on it, iMovie'09 exited unexpectedly. When i relaunch, i've been having problem loading this specific project. It kept having the spinning icon on the preview window and stays that way forever.
I have no problem loading other projects. What could've happened?? I can't afford to redo the entire project as it is a real pain to do so! I could remember the last thing i did before iMovie'09 exited was copying & pasting some text from the web to that project i was working on. And suddenly this happened.
I've tried reinstalling iMovie, deleting project folder, disabling fonts, etc but to no success.
Any help would be much appreciated!
Thank you.

Has anyone had any luck repairing, rebuilding or recovering a damaged project? I think I'm suffering the same thing. In my case, the project loads into the project window so I can see the clips, transitions and such, but it will not play. So close, and yet so far.
I've been searching this forum for answers. There are a lot of reports of projects that suddenly "die" but it seems that every thread ends with a question mark and no solution.
If there's no way to fix a broken project, this is a very serious flaw that everyone should consider before devoting days of effort to an iMovie project. Of course backups will save some effort but let's face it, most programs don't routinely produce damaged files. This needs to be fixed or users need to warned up front of the possibility of losing hours of work.

Similar Messages

  • "unable to load labview project" in Deployment Machine

    Hi all,
    well the Deployment Target works fine on Development machine
    But has problem Loading on the Deployment System     "unable to load labview project"
    has anyone had similar issues  and  ound a soln.
    NI Support  has not responded yet to the solution.
    Attachments:
    unabletoload.PNG ‏17 KB

    Hi aparab,
    I think I will need more information to solve this issue.
    You told "NI Support  has not responded yet to the solution." Do you already have a service request number of the NI support?
    Can you post your project? Which RT-target do you use? Which hardware?
    You can also post a MAX report of you windows computer and one of your target:
    1. Start -> Programs -> NI MAX
    2. File -> create protocol -> choose technical support and my system (development computer) -> next -> next -> choose path -> next -> finish.
    3. File -> create protocol -> choose technical support and your RT-target (real-time system) -> next -> next -> choose path -> next -> finish.
    Best regards
    Suse
    Certified LabVIEW Developer (CLD)

  • Unable to load the project. latter is probably damaged or contain outdated elements

    any one can help me with this probleme

    Hi,
    I am the one with the problem wich kaderdz exposed. Sorry for my English writing, my first language is French!
    I still have the same problem and some of my projects won't open (months of work...).
    The few projects that opens are kind of weird : only one chanel work in the audio, and the "title" window has also change. Here are some screen shots of what happens :
    message 1:
    message 2 - translation : impossible to charge the project. It is damage or contain obsolet elements :
    message 3 :
    title window :
    I would be so grateful if you can solve the problem. It's a lot of work!!

  • Project Server 2013 - This webpart was unable to load

    Hi all,
    I am getting the following error in project server 2013 project sites:
    This webpart was unable to load. For more information, please contact your server administrator.
    <Guid>
    I only get this error message on 'Project Summary Web Part'.
    Any idea what it could be?
    Thank you,
    SJ

    Hi there!
    I got similar problem in a PDP that was working perfectly even after migration to 2013. On this case, my PDP was showing the webpart that let you to choose what fields and custom fields want to show on a specific PDP.
    I created a copy of the crashed PDP and got the same error. So I bet for remove all the custom fields and add one by one to see what happens. The surprise came up when it started to work when my PDP had just pair of custom fields. With this procedure,
    I found that the problem was on some specific custom fields created that had null values to all the projects created before. Once I forced value on those fields it worked properly!!
    Sometimes EPM2013 has a very strange behavioural and in some cases just clicking on EDIT and SAVE  without any change have solved some of my problems too.
    I hope it helps this to you and feel free to contact me if I can somehow help you :)
    Diego

  • Unable to load the 'C:\InetPub\robohelp\' project.  The project is invalid.

    We're having troubles opening/viewing our 'prepsmart' project
    on our production server. (It works fine in our test environment).
    I have tried re-installing RoboEngine 4.0, and successfully
    re-generated and re-published the project to the server. However,
    when I try to access the project using a url like:
    http://<servername>:<port>/RoboAPI.asp?project=prepsmart&context=700,
    it displays the message: "Contragulations The RoboEngine has been
    successfully created. To get started using RoboEngine, you need to
    publish a project. Please see the getting started guide or
    deployment manual that corresponds to your authoring tool for more
    information. "
    I see the same screen if I click on "View Project" within the
    RogoEngine Configuration Manager.
    When I click the Troubleshoot icon in the Configuration
    manager, it lists the following errors:
    Unable to load the 'C:\InetPub\robohelp\' project. The
    project is invalid.
    Project prepsmart cannot be found.
    Unable to locate the ' ' window.
    Cannot find the list of projects.
    If I specify a specific page (i.e.
    http://denpiis01:8000/Robo/BIN/Robo.dll?tpc=/robo/projects/prepsmart/Getting_Started.htm),
    it displays the help page. So, I
    think the web site is configured and working OK.
    Any ideas why I can successfully publish the project, but
    RoboEngine can't find the project?
    Thanks,
    Greg

    Hello Vipul Kumawat,
    I saw a related thread from here:
    http://stackoverflow.com/questions/15246449/visual-studio-xaml-designer-not-getting-loaded
    Their solution is related to fix corrupt Visual Studio.
    So may I clarify the following:
    1. What's your Visual Studio version?
    2. Have you ever tried to repair Visual Studio from control panel first?
    3. Can you reproduce this issue when access any other new projects? For example, Store App, WPF App, or even new simple Windows Phone app? What's the result if you use them?
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to load project (prel file)  into Premier Elements 7.0

    just installed 7.0 ..when attempting to load a project (slide show for play back on a DVD) created in Elements 3.0 .. get error that "The project could not be loaded, it may be damaged or contain outdated elements" .. I have no problem loading the same project in Elements 3.0. Also seems specific to this file, an other project create under 3.0 appears to load with out error. I  should point out that  the project that will not load was created in Elements 5.0 and exported over to Premier Element 3.0 to create a playable DVD .. the file that will load was created in Premier Elements 3.0 (not sure if that is significant but more information is better then less) .. any thoughts / suggestions would be appreciated ..thanks

    "The project could not be loaded, it may be damaged or contain outdated elements"
    Unfortunately, the last part of that error says it all. Something is used, that no longer is in PE7, or has been changed significantly. Could be an Effect, a Transition (though those usually just disappear, and the file still Imports - PrPro gives a warning, and tells you which Transition is missing, and the TimeCode of where it was used), or something else.
    If you have PE3, you can do two things:
    1.) finish the edit there and Export to your delivery format
    2.) Export a DV-AVI file and bring THAT into PE7
    Neither is quite as good as being able to Import the .PREL and work on it in PE7, but those are about the only choices that I see. Now, if you have any clue as to what the Effect (whatever) is, that's causing the problem, you *might* be able to open a COPY of the .PREL in WordPad, search for that Effect, eliminate reference to it, and then Save as a .PREL. That might be a lot of work, and might well destroy that COPY of the file - that's why you work on a COPY.
    Good luck,
    Hunt

  • Unable to load project after delete some path with files but not used at all

    Im using the demo of Premiere Pro CC last demo download today.
    All the fuc**ng day editing some videos, and saved, then I deleted som efolder containing some video files (almost not used) then when I try to open premiere the project I were working, premiere opens, load and freezes and nothing happens, it keeps on the main area withouht any windows, and I cant get my 10 hours of work What happening with thei premiere ? And Im unable to open the project in Premiere CC 7.0 from another computer as saif it was done using new version.
    I NEED A SOLUTION !
    Or never never more use premiere

    I NEED A SOLUTION !
    Don't do this mid stream in EDIT
    ... I deleted som efolder containing some video files (almost not used)...
    TRY  - Go to you Back Up project file or an Auto save and hope that recovers some of your work afterrestoring what you deleted.

  • Open project was canceled or RoboHelp was unable to load database

    I have Robohelp 2002r2 and am creating Robohelp HTML help.
    The project was ok yesterday but today when I try to open it I get
    the error message "Open project was canceled or RoboHelp was unable
    to load database". I tried the solutions in the knowledgebase
    (rb_3245) but still no luck. I can't even create a new project
    either or I get the same message. Anybody know what to
    do????

    Welcome to the forum.
    The message is usually easily dealt with. I haven't checked
    the article as you didn't include a link but I'm guessing it
    involved deleting a couple of files and then using the HHP file to
    open the project.
    What is more worrying is that you cannot create a new
    project.
    Have you tried opening one of the supplied sample files?
    Are your projects stored locally and not on a network?
    Have IT given you a new profile to log on with?
    Has anything else changed in your environment?

  • Project Error: Open project was canceled or RoboHelp was unable to load database

    Hi,
    I checked an HTMLHelp project out of SourceOff Site (SOS),
    then attempted to open it locally with RoboHelp 5 when I got the
    error message: "Open project was cancelled or RoboHelp was unable
    to load database."
    I found the TechNote for this error message (rb_3245) which
    said to delete the .xpj and .cpd files, then right-click the HHP
    file and click Edit to open the project. This worked fine for
    opening the project, however the Primary Layout Source defaulted to
    WebHelp. I reset the Primary Layout Source to HTMLHelp which caused
    all of the graphics in the project to not display. I fixed this
    issue, compiled the Help, and all appeared to be fixed. I checked
    the project back into SOS to back it up. This morning, I checked it
    out of SOS and tried to open the project locally again, only to get
    the same error. I closed the project, undid the check-out, and
    asked another writer to check-out the project then open it locally
    to see if he got the same error. He did not get the error.
    I am not sure what could be wrong on my computer that is
    causing this error. I had no problems opening and using this
    project until yesterday and I made no file name or path changes to
    the project. Any ideas on what may be wrong?

    Welcome to the forum.
    The message is usually easily dealt with. I haven't checked
    the article as you didn't include a link but I'm guessing it
    involved deleting a couple of files and then using the HHP file to
    open the project.
    What is more worrying is that you cannot create a new
    project.
    Have you tried opening one of the supplied sample files?
    Are your projects stored locally and not on a network?
    Have IT given you a new profile to log on with?
    Has anything else changed in your environment?

  • "open project was cancelled or the application was unable to load database for..."

    I'm doing a project for my Professional Writing course and I
    have to use RoboHelp to create an online help document. The
    professor provided templates for us to use but when I go to open
    the project file I get the following error: "open project was
    cancelled or the application was unable to load database
    for....(then the directory)"
    I know the project file isn't corrupted because the members
    of my class are using the same one without issue. I tried
    re-downloading the file, I also re-installed the program itself,
    still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
    The only other suggestions I have seen are that I don't have
    edit perms for the system, but it's my personal laptop and I have
    full admin privs. I thought at first that the folder was read-only,
    but when I opened it up all it displays is the little green box in
    the checkbox (which doesn't mean the folder is read-only, it's just
    some stupid windows default, it's only read-only if the box is
    actually checked). I tried making the entire directory read-only
    and then turn it off but still get the same error.
    Any suggestions?

    There's a topic on my site about Opening Projects that
    includes the method of deleting the CPD and XPJ files but I didn't
    cover that as the project is good for everyone else. Anything is
    worth a try at the moment though.
    Another thing to try is to rename the course folder, then
    create a new folder with the same name plus all sub folders. Then
    move the files across. That will ensure the folder properties are
    good and not read only. Yes I know what you said but again anything
    is worth a try.
    Also, in the last post you are saying the directory is not
    read-only. I assume the files are all good?
    Ref my previous post, is it the case that now you are getting
    an error before the original error would have popped up?

  • Open project was cancelled or application was unable to load database for pathname

    My pc is installed with Robohelp 3x. Recently I shifted the
    pc from one room to anther. Now when I attempt to open my existing
    workable solution, it give me the following message: "Open project
    was canceled or application was unable to load database for
    <pathname>". Do I need to call for Robohelp technical
    support? If yes, can someone provide me the toll free number?
    Can someone pls advise?

    Thanks Peter, managed to get in through the link you've
    given. I seriously doubt it has anything gotta do with a corrupted
    project. I have 2 working projects last week but they can no longer
    be opened this week.
    I tried even to created an empty project from scratch. It was
    created successfully but when I reopen the project, it shows the
    same error message.
    Could there have been other possibilities or ways which I can
    troubleshoot?
    *puzzled*

  • Project Details Web Part Unable To Load

    We have recently migrated a customer's Project Server 2007 instance to Project Server 2013. While opening some of the projects in PWA to edit the project custom fields, we encountered an error "This Web Part was unable to load.". Further investigation
    found that it was due to some non-mandatory custom fields having lookup tables and graphical indicators, but were entered as blank. We did not have any problems in Project Server 2007. Is there any solution for this?
    The ULS log shows the following error: 
    [bucketHash:E8DACC42] Webpart ProjectFieldPart failed in PageLoadComplete. Unique ID: 06385c9c-53dd-20d6-7f2f-37a33f0b405c System.InvalidCastException: Cannot cast DBNull.Value to type 'System.Guid'. Please use a nullable type.     at System.Data.DataRowExtensions.UnboxT`1.ValueField(Object
    value)     at Microsoft.Office.Project.PWA.CustomFieldUtil.<BuildCFInputRow>b__0(DataRow row)     at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()     at System.Collections.Generic.List`1..ctor(IEnumerable`1
    collection)     at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)     at Microsoft.Office.Project.PWA.CustomFieldUtil.BuildCFInputRow(Control ctlParent, CustomFieldsRow cf, String cfID, Hashtable htValues,
    ArrayList clientIdAl, ArrayList divBtnPairs, Boolean useSecondaryUid, Boolean fieldReadOnly, Boolean isBulkEdit, String currency, Boolean loadDefaultForLU, Boolean forceSingleValue, LookupTableDataSet ltds, Nullable`1 serverSeparator, Page page)    
    at Microsoft.Office.Project.PWA.WebParts.ProjectFieldPartBase.RenderReadWriteProjectField(Guid customFieldGuid, ProjectFieldDisplayModel customFieldInfo, Literal lblName, Literal lblDescription, PlaceHolder pchCFControl, String[] containingElements)    
    at Microsoft.Office.Project.PWA.WebParts.ProjectFieldPartBase.ProcessCustomFieldControl(Guid customFieldGuid, Literal lblName, Literal requiredControl, Literal lblDescription, PlaceHolder pchCFControl, String[] containingElements)     at
    Microsoft.Office.Project.PWA.WebParts.ProjectFieldPartBase.ReplacePlaceHoldersWithCustomFieldControls()     at Microsoft.Office.Project.PWA.WebParts.PWAResiliencyPart.PageLoadComplete_ResiliencyCallback(Object sender, EventArgs e) StackTrace: 
    at Microsoft.Office.Project.Server.Native.dll: (sig=85ae470f-554c-4a8c-992e-92aeb657c829|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)

    Hi,
    Try to update web from following after migration you need to perform below for web part
    $Web = get-SPWeb $Web.AllProperties | Format-Table
    $Web.AllProperties[“PWAURL”]=””
    $Web.Update()
    $Web = get-SPWeb 
    $Web.AllProperties | Format-Table
    $Web.AllProperties[“PWAURL”]=””
    $Web.Update()
    also from you last reply i understood that after removing custom field which are having graphical indicator and look up PDP is working as expected. It means look up and graphical indicator is creating issues.
    For Custom field which are having look up field if no value will be selected then it may give error its a expected behavior. It means you need to fill values in those custom field else you will face issue.
    For Graphical Indicator issue: Go through below links 
    http://social.microsoft.com/Forums/en-US/6cdfc2bf-1df7-4b26-a60f-220364093bda/pdp-webpart-and-graphical-indicators?forum=project2010custprog
    http://social.technet.microsoft.com/Forums/projectserver/en-US/75b8f6af-0060-4870-a50d-45d44b58cf5f/indicators-on-pwa-not-displaying-project-server-2010-dec-cu
    Hope it will help. Please let me know the out come. 
    kirtesh

  • I can play my video clips as events but unable to load them into project this just started

    I can play my video clips as events but unable to load them when I drag them to project.

    I am using a macbook pro not a mini

  • Unable to Load Database/Unable to create database.

    RoboHelp 6.0 on my PC is suddenly unable to open existing
    projects or create new ones. The problem is not in the projects, as
    other people can unzip the same set of files and open them with
    RoboHelp on their PCs.
    The Details:
    When attempting to open an existing project (any project
    whether in version control or not), I get the message " Open
    project was cancelled or the application was unable to load
    database for..."
    I found the article that says to delete the CPD and XPJ files
    and then to use the Edit option to open the HHP file so that
    RoboHelp will recreate the two files. When I try that, I get the
    message "Unable to create database. Check that the directory is not
    read-only." It's
    not read-only.
    When I attempt to create a new project, the application acts
    like it is going to create one, but it just creates a project
    folder without the new first topic and then repeats the New Project
    Wizard window that prompts for title, etc. It will keep creating
    folders and returning to this window in a loop without ever really
    creating a project.
    RoboSource Control is functioning normally, by the way.
    I have uninstalled and reinstalled RH 6 several times, and
    have even uninstalled RH 6 and installed to RH 5 just to see if it
    could open projects, which it does with no problems. After that
    test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
    the same problem all over again.
    This started happening after I uninstalled other unrelated
    software and received a message that some Service Pack 2 files had
    been changed and prompting me to insert the Service Pack 2 CD,
    which I don't have. This is because our IT department pre-builds
    our systems from an image and then distributes job-specific
    applications over the network. IT tried repairing Service Pack 2,
    but that didn't work. I'd like to uninstall and reinstall Service
    Pack 2, but the IT person says it's too risky on a system that was
    built from an image.
    We would like to find out
    which files RoboHelp is looking for when it launches a
    project so we can replace those files manually. Does anyone
    know what they are or have another suggestion that might fix the
    problem?
    Otherwise, I am stuck having to allow IT to rebuild my
    system. That means reinstalling and reconfiguring everything on it,
    just as if I were upgrading to a new PC. This can take a whole work
    week. However, I have already spent close to a work week on this
    problem, so maybe rebuilding would save time in the long
    run.

    Problem Resolution = HHA.dll
    For anyone who might be interested in the resolution to this
    issue, we did rebuild my PC and reinstall all of my software. The
    RoboHelp installation "complained" that I did not have HTML Help
    Workshop on my system and told me to download version 1.4 from
    Microsoft. I did have HTML Help Workshop..it's in my programs list.
    (It's not listed in programs on my co-workers' PCs, and they were
    not having problems, by the way.) But to make RH happy, I
    uninstalled the workshop and tried to install the version from
    Microsoft. But a message informed me that I already had a newer
    version of the workshop on my system, and I was back where I
    started. I could open projects, but there were weird problems.
    Selecting Topic Properties was met with an error message, and when
    the properties window opened, I could only see whatever template
    was assigned (or none if the topic had lost its template), and
    there was an extra section for Oracle help.
    So I started dinking around in the registry to see if I could
    get rid of any traces of the workshop so I could install the
    version RH wanted or to find any other clues to my problem. Under
    HTMLHelpAuthor, there was a reference to an HHA.dll file located in
    C:\WINDOWS\system32...only the file did not exist on my system.
    (Remember that my original problem was that some Service Pack 2
    files were either modified or missing.) So I did a Google search on
    that file name and found out that HTML Help Workshop is included in
    newer Windows operating systems, but that people used to have to
    get HTML Help Workshop from Microsoft, and that some people had
    made the mistake of just putting the HHA.dll file into the
    C:WINDOWS\system32 folder without also installing HTML Help
    Workshop. At this point it was obvious that I needed the HHA.dll,
    so I got it from a co-worker's PC. (Looking at the registry
    entries, I can also see that my system was built with a slightly
    different version of the operating system than my co-workers have.)
    Adding the HHA file to my system solved the problem. All
    projects but one were fine; one was still exhibiting the strange
    behavior. I fixed it by going back to the RoboHelp 5 version of the
    project and re-converting it to RoboHelp 6.
    I suspect that if I had known about the HHA.dll file before
    we rebuilt the PC, I could have solved the problem without going
    through that painful process. That is why I thought I should post
    the solution even though it was after the rebuild.

  • Eclipse Plugin Creation - "Plug-in name was unable to load class " error

    Hi everybody and happy new year to you all,
    i got a little problem again. I have written the first lines of code of my plugin and wanted to test it (run as Eclipse Application). I got the following error-msg, when clickin either on the menu item or toolbar button:
    "Could not create action delegate for id: org.eclipse.tui.inpulse.actions.InpulseStart
    Reason:
    Plug-in org.eclipse.tui.inpulse was unable to load class org.eclipse.tui.inpulse.InpulseStart."
    My project has the following properties (of which i read they are important):
    Source folder: org.eclipse.tui.inpulse/src
    Output folder: org.eclipse.tui.inpulse/bin
    Dependencies: org.eclipse.ui, org.eclipse.core.runtime
    Extensions: org.eclipse.ui.actionSets
    ExtensionsPoints: none
    The following is my plugin xml:
    <plugin>
       <requires>
              <import plugin="org.eclipse.core.resources"/>
            <import plugin="org.eclipse.ui"/>
        </requires>
        <runtime>
              <library name="Inpulse.jar"/>
        </runtime>
        <extension
              id="org.eclipse.tui.inpulse.InpulseActionSet"
              name="org.eclipse.tui.inpulse.InpulseActionSet"
              point="org.eclipse.ui.actionSets">
            <actionSet
                id="org.eclipse.tui.inpulse.InpulseActionSet"
                label="Inpulse"
                  visible="true"
             description="The action set for the Eclipse Hello World example">
             <menu id="org.eclipse.tui.inpulse.InpulseMenu" label="Inpulse">
                   <separator name="samples"/>
             </menu>
             <action id="org.eclipse.tui.inpulse.actions.InpulseStart"
                   menubarPath="org.eclipse.tui.inpulse.InpulseMenu/samples"
                   toolbarPath="Normal"               
                   label="Inpulse"
                   tooltip="Start pattern search."
                   class="org.eclipse.tui.inpulse.InpulseStart"/>
            </actionSet>
       </extension>
    </plugin>The javafile "InpulseStart.java" is in the "org.eclipse.tui.inpulse" package and has the first line "package org.eclipse.tui.inpulse;". The class "InpulseStart" implements "IWorkbenchWindowActionDelegate".
    So the following members are implemented:
    public void run(IAction proxyAction){...};
    public void selectionChanged(IAction proxyAction, ISelection selection){...};
    public void dispose(){...};
    //and some additional ones ;-)I really dont know what i do wrong. If you have an idea, what i just miss out or do wrong, id be glad if you helped me out!
    Cya

    Aye, you are right, i should/could have posted this somewhere else. I just hoped, that i can get a good answer here, cause ppl helped me out very nice before.
    Im sorry if i offended users of this forum...
    The "advice" is recognized and i will post somewhere else in case i have a eclipse specific problem.

Maybe you are looking for

  • Errors when using sql loader direct path with a nvl functin on a date field

    I thought I read in 10g that all sql functions now work in direct path mode. the following function works without direct path mode. When we turn direct path mode on the load fails. When we take the function out in direct path mode it works. mydate DA

  • Location in Maps not working

    Updated to new software the day after the announcement and most everything works fine. I like the new apps and the customizable home screen. Maps works fine except that it can't seem to find my location. Pressing the button results in a message, "You

  • Problem with Seek and RTMPPosteFrameElement

    I am having difficulties seeking a serial element, and I believe it's because we removed the Temporal trait inside the RTMPPosterFrameElement.  When I comment out that code, the posterframe does not pause but the serial element seeks fine. Otherwise,

  • How to make sure the thread is completed?

    Hi there, Say I have a thread (A) and it's running. is there anyway I can hold all other tasks/threads until the thread (A) is competed? My GUI hasa button and once clicked some events happens. I would like to restrict the user from clicking the butt

  • Reading a WPS files with Pages

    I was sent an email file attachment in a .WPS format. Is there a utility or simple trick to open and read these types of files with Pages?