Unable to load the project. latter is probably damaged or contain outdated elements

any one can help me with this probleme

Hi,
I am the one with the problem wich kaderdz exposed. Sorry for my English writing, my first language is French!
I still have the same problem and some of my projects won't open (months of work...).
The few projects that opens are kind of weird : only one chanel work in the audio, and the "title" window has also change. Here are some screen shots of what happens :
message 1:
message 2 - translation : impossible to charge the project. It is damage or contain obsolet elements :
message 3 :
title window :
I would be so grateful if you can solve the problem. It's a lot of work!!

Similar Messages

Transfer to new PC: The project could not be loaded, it may be damaged or contain outdated elements

The Problem
I have transferred a large and functioning Premiere Pro project to a more powerful PC but am unable to run it, stopped by the error message "The project could not be loaded, it may be damaged or contain outdated elements".
Facts
The new PC has a 6-core processor and a different hard drive configuration but the operating system on both is Windows 7 and both PCs host up-to-date Premiere Pro CS6 (as part of Adobe Production Premium). The PCs are networked and Premiere Pro on the old PC can successfully load and run the project file located on the new PC, proving that the transferred file is not damaged. Also, preceding versions of the same project generate the same error message when run on the new PC except, very oddly, for earlier versions saved on or before 28 June 2011, when the project was only a fifth of its current size; those versions load correctly. Contemporary notes show that the editing carried out that day was simple timeline editing, ie no After Effects etc (that came later), and the project has worked fine then and since.
So I don't have a damaged project file and don't know what "outdated elements" means.
Help
Any help solving this problem would be much appreciated.

Hi Vinay
As suggested I renamed the additional folder, created a new project, set 'Custom' editing mode, 'Microsoft AVI' as the preview format with 'Uncompressed' codec.
Unfortunately the results were similar to before: On importing the original project into the new project I was sequentially asked for the locations of various files, including After Effects .aep files. The final file location request, for an mp3 audio file, was followed by lots of conforming and indexing. During this process the 'Where is the file XXX.mp3? window stayed locked open. Eventually, with all conforming etc finished, this window was still open and locked. Clicking anywhere on the screen caused a 'ding' and another, smaller, box opened, listing three .aep files. This box asked no questions and gave no options for selecting a file location so, with the topmost file highlighted, I just clicked 'ok' and the box disappeared, leaving the 'Where is the file XXX.mp3?' box still open.
The importing process took about 30 minutes. I waited another 10 minutes, in case something was happening in the background, but with the Task Manager CPU usage value sitting on 0 or 1%, I used it to shut down the project.
For what it is worth, I created a simple new project on the old PC – just a few video clips and transitions in a single sequence (no After Effects etc). This project was then transferred to the new PC and it opened successfully.
Again I remain grateful to you for this and any more advice.
Best regards
Dave

Unable to load the EJB module. DeploymentContext does not contain any EJB.

I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
     at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
     at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
     at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
     at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
     at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
     at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
     at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
     at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
     at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
     at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
     at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
     at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
     at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
     at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
     at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
     at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
     at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
     at java.lang.Thread.run(Thread.java:722)

My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

THE PROJECT COULD NOT BE LOADED, IT MAY BE DAMAGE OR CONTAIN OUTDATED ELEMENTS

I am trying to open a .prprj worked yesterday but I get this msg: THE PROJECT COULD NOT BE LOADED, IT MAY BE DAMAGE OR CONTAIN OUTDATED ELEMENTS
I tried to import it in a new project, import it in AE, open an aotosaved project (there are so old, not usefull)
I know that it can be edited in XML, but I don't understand anythig of that...
HOW DO I REPAR IT???
Any help???

Hi,
thanks for for the comment! In fact I did try this and I also tried to import a sequence only. I haven´t changed anything but I guess the automatic update of windows 8.1. has.
And then I noticed that I´m not at all alone with my problem...
Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
So the final solution seems not to be in my hands ;~)
Cheers,
Petri

The project could not be loaded, it may be damaged or contain outdated elements.

Hi,
I need help, desperately!
I was working today with a small project. I was almost ready, just some titles missing...
Suddenly I could not load the project anymore. I got these messages (see below).
I´m using Premiere Pro CS 6 from my hard disk. Operating system is Windows 8.1.
Never had this kind of problems before. I can still load other, previous projects without a problem.
Is there a solution for this?
petrihan

Hi,
thanks for for the comment! In fact I did try this and I also tried to import a sequence only. I haven´t changed anything but I guess the automatic update of windows 8.1. has.
And then I noticed that I´m not at all alone with my problem...
Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
So the final solution seems not to be in my hands ;~)
Cheers,
Petri

"Project could not be loaded, it may be damaged or contain outdated elements" (CS5.5)

Hi!
Yes I'm obviously really kicking myself for not having backed up this project I've spent 100's of hours on (even though I'd been fastidious about backing up all the sequences within the project after changes were made and having multiple copies of all the actual media files)... somehow it just did not occur to me that the basic project file itself was vulnerable in this way. wow.......
I was actually on my last evening of editing, working on it since summer.
Anyway I've checked the auto-save files (corrupted) and tried everything else suggested in countless threads on this topic around the internet and come to the conclusion that the file IS damaged. I've downloaded XML Wrench to try to fix it (I don't have a Mac to do the Digital Rebellion thing) but not knowing anything of XML, it hasn't worked out so far. So is there anyone who might be able to point me in the right direction for getting the file repaired by a third party? I was not able to find a service who might offer such a thing but maybe somebody knows someone?
Thank you for any help!!!

Hi James,
Have you tried creating a new project and then importing items from your corrupted project?
JamesLassen wrote:
somehow it just did not occur to me that the basic project file itself was vulnerable in this way. wow.......
I always taught my students to back up project files to three places (on the HD, on removable media, in the cloud) on a daily basis. You may want to fall into this habit as it has always saved me from losing work. I'm sorry that you weren't aware that project files should be protected with back ups as they can can become corrupt, as you have seen.
Good luck,
Kevin

The project could not be loaded, it may be damaged or contain outdated elements - PLEASE HELP

Hi Dear Adobe Forum,
I need help, please
i cant open my project
I72600K
Gygabite Z77Ud5
Matrox Rtx2
16Gb ram
Adobe premiere cs5.0.3
Nvidia geeforce gtx460
u can download my file from here[code]http://speedy.sh/Ahkxh/Anahit1.prproj[/code]http://speedy.sh/Ahkxh/Anahit1.prproj

As a happy user of the Matrox RT.X2 for many years, and later an equally happy user of a Matrox MXO2, I can say from experience that it is highly unlikely that this problem has anything to do with the Matrox hardware!
Can you open a new blank project, and save it?
If you cannot import your faulty project into a new project, can you import the sequence from your faulty project?
Have you tried clearing the Media Cache, clearing your preferences, etc. - all among the techniques used to resurrect a Premiere Pro project that has gone bad???

Unable to load the 'C:\InetPub\robohelp\' project. The project is invalid.

We're having troubles opening/viewing our 'prepsmart' project
on our production server. (It works fine in our test environment).
I have tried re-installing RoboEngine 4.0, and successfully
re-generated and re-published the project to the server. However,
when I try to access the project using a url like:
http://<servername>:<port>/RoboAPI.asp?project=prepsmart&context=700,
it displays the message: "Contragulations The RoboEngine has been
successfully created. To get started using RoboEngine, you need to
publish a project. Please see the getting started guide or
deployment manual that corresponds to your authoring tool for more
information. "
I see the same screen if I click on "View Project" within the
RogoEngine Configuration Manager.
When I click the Troubleshoot icon in the Configuration
manager, it lists the following errors:
Unable to load the 'C:\InetPub\robohelp\' project. The
project is invalid.
Project prepsmart cannot be found.
Unable to locate the ' ' window.
Cannot find the list of projects.
If I specify a specific page (i.e.
http://denpiis01:8000/Robo/BIN/Robo.dll?tpc=/robo/projects/prepsmart/Getting_Started.htm),
it displays the help page. So, I
think the web site is configured and working OK.
Any ideas why I can successfully publish the project, but
RoboEngine can't find the project?
Thanks,
Greg

Hello Vipul Kumawat,
I saw a related thread from here:
http://stackoverflow.com/questions/15246449/visual-studio-xaml-designer-not-getting-loaded
Their solution is related to fix corrupt Visual Studio.
So may I clarify the following:
1. What's your Visual Studio version?
2. Have you ever tried to repair Visual Studio from control panel first?
3. Can you reproduce this issue when access any other new projects? For example, Store App, WPF App, or even new simple Windows Phone app? What's the result if you use them?
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[Solved] Problem with Xorg, unable to load the right keymap

Hi, people,
I recently installed arch on a desktop, but there is a problem installing X: for whatever reason, Xorg seems unable to load the correct keymap (fr-latin9) and instead, loads the default one.
I can see what seems to be the problem in the Xorg logs, but I actually absolutely don't know how to solve it. Here my /var/log/Xorg.0.log
root@kgentoo keikoz # cat /mnt/tmp/var/log/Xorg.0.log
[ 9.900]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.900] X Protocol Version 11, Revision 0
[ 9.900] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 9.900] Current Operating System: Linux kdesktop 3.4.9-1-ARCH #1 SMP PREEMPT Wed Aug 15 18:59:31 CEST 2012 x86_64
[ 9.901] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7d2d3ed4-6903-4845-b70d-9462f52f4329 ro quiet
[ 9.901] Build Date: 27 August 2012 08:04:39AM
[ 9.901]
[ 9.901] Current version of pixman: 0.26.2
[ 9.901] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.901] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 26 16:32:35 2012
[ 9.950] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.967] (==) No Layout section. Using the first Screen section.
[ 9.967] (==) No screen section available. Using defaults.
[ 9.967] (**) |-->Screen "Default Screen Section" (0)
[ 9.967] (**) | |-->Monitor "<default monitor>"
[ 9.969] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.969] (==) Automatically adding devices
[ 9.969] (==) Automatically enabling devices
[ 10.002] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10.002] Entry deleted from font path.
[ 10.006] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.007] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.007] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10.007] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.007] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.007] (II) Loader magic: 0x7c8b00
[ 10.007] (II) Module ABI versions:
[ 10.007] X.Org ANSI C Emulation: 0.4
[ 10.007] X.Org Video Driver: 12.1
[ 10.007] X.Org XInput driver : 16.0
[ 10.007] X.Org Server Extension : 6.0
[ 10.008] (--) PCI:*(0:3:0:0) 10de:0141:107d:200d rev 162, Mem @ 0xcc000000/67108864, 0xd0000000/268435456, 0xcb000000/16777216, BIOS @ 0x????????/131072
[ 10.008] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.008] (II) LoadModule: "extmod"
[ 10.018] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 10.033] (II) Module extmod: vendor="X.Org Foundation"
[ 10.033] compiled for 1.12.4, module version = 1.0.0
[ 10.033] Module class: X.Org Server Extension
[ 10.033] ABI class: X.Org Server Extension, version 6.0
[ 10.033] (II) Loading extension MIT-SCREEN-SAVER
[ 10.033] (II) Loading extension XFree86-VidModeExtension
[ 10.033] (II) Loading extension XFree86-DGA
[ 10.033] (II) Loading extension DPMS
[ 10.033] (II) Loading extension XVideo
[ 10.033] (II) Loading extension XVideo-MotionCompensation
[ 10.033] (II) Loading extension X-Resource
[ 10.033] (II) LoadModule: "dbe"
[ 10.033] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 10.034] (II) Module dbe: vendor="X.Org Foundation"
[ 10.034] compiled for 1.12.4, module version = 1.0.0
[ 10.034] Module class: X.Org Server Extension
[ 10.034] ABI class: X.Org Server Extension, version 6.0
[ 10.034] (II) Loading extension DOUBLE-BUFFER
[ 10.034] (II) LoadModule: "glx"
[ 10.034] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.016] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.016] compiled for 4.0.2, module version = 1.0.0
[ 11.016] Module class: X.Org Server Extension
[ 11.016] (II) NVIDIA GLX Module 304.37 Wed Aug 8 20:16:03 PDT 2012
[ 11.016] (II) Loading extension GLX
[ 11.016] (II) LoadModule: "record"
[ 11.016] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.026] (II) Module record: vendor="X.Org Foundation"
[ 11.026] compiled for 1.12.4, module version = 1.13.0
[ 11.026] Module class: X.Org Server Extension
[ 11.026] ABI class: X.Org Server Extension, version 6.0
[ 11.026] (II) Loading extension RECORD
[ 11.026] (II) LoadModule: "dri"
[ 11.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.049] (II) Module dri: vendor="X.Org Foundation"
[ 11.049] compiled for 1.12.4, module version = 1.0.0
[ 11.049] ABI class: X.Org Server Extension, version 6.0
[ 11.049] (II) Loading extension XFree86-DRI
[ 11.049] (II) LoadModule: "dri2"
[ 11.050] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.050] (II) Module dri2: vendor="X.Org Foundation"
[ 11.050] compiled for 1.12.4, module version = 1.2.0
[ 11.050] ABI class: X.Org Server Extension, version 6.0
[ 11.050] (II) Loading extension DRI2
[ 11.051] (==) Matched nouveau as autoconfigured driver 0
[ 11.051] (==) Matched nvidia as autoconfigured driver 1
[ 11.051] (==) Matched nv as autoconfigured driver 2
[ 11.051] (==) Matched vesa as autoconfigured driver 3
[ 11.051] (==) Matched fbdev as autoconfigured driver 4
[ 11.051] (==) Assigned the driver to the xf86ConfigLayout
[ 11.051] (II) LoadModule: "nouveau"
[ 11.059] (WW) Warning, couldn't open module nouveau
[ 11.059] (II) UnloadModule: "nouveau"
[ 11.059] (II) Unloading nouveau
[ 11.059] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 11.059] (II) LoadModule: "nvidia"
[ 11.060] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.274] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.274] compiled for 4.0.2, module version = 1.0.0
[ 11.274] Module class: X.Org Video Driver
[ 11.300] (II) LoadModule: "nv"
[ 11.301] (WW) Warning, couldn't open module nv
[ 11.301] (II) UnloadModule: "nv"
[ 11.301] (II) Unloading nv
[ 11.301] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.301] (II) LoadModule: "vesa"
[ 11.301] (WW) Warning, couldn't open module vesa
[ 11.301] (II) UnloadModule: "vesa"
[ 11.301] (II) Unloading vesa
[ 11.301] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 11.301] (II) LoadModule: "fbdev"
[ 11.302] (WW) Warning, couldn't open module fbdev
[ 11.302] (II) UnloadModule: "fbdev"
[ 11.302] (II) Unloading fbdev
[ 11.302] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11.302] (II) NVIDIA dlloader X Driver 304.37 Wed Aug 8 19:54:47 PDT 2012
[ 11.302] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.303] (++) using VT number 7
[ 11.317] (II) Loading sub module "fb"
[ 11.317] (II) LoadModule: "fb"
[ 11.317] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.330] (II) Module fb: vendor="X.Org Foundation"
[ 11.330] compiled for 1.12.4, module version = 1.0.0
[ 11.330] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.330] (II) Loading sub module "wfb"
[ 11.330] (II) LoadModule: "wfb"
[ 11.331] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.347] (II) Module wfb: vendor="X.Org Foundation"
[ 11.347] compiled for 1.12.4, module version = 1.0.0
[ 11.347] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.347] (II) Loading sub module "ramdac"
[ 11.347] (II) LoadModule: "ramdac"
[ 11.347] (II) Module "ramdac" already built-in
[ 11.366] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.366] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11.366] (==) NVIDIA(0): RGB weight 888
[ 11.366] (==) NVIDIA(0): Default visual is TrueColor
[ 11.366] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.367] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.308] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 13.308] (II) NVIDIA(GPU-0): Vision stereo.
[ 13.311] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 (NV43) at PCI:3:0:0 (GPU-0)
[ 13.312] (--) NVIDIA(0): Memory: 262144 kBytes
[ 13.312] (--) NVIDIA(0): VideoBIOS: 05.43.02.64.68
[ 13.312] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 13.312] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 13.312] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 at PCI:3:0:0
[ 13.312] (--) NVIDIA(0): CRT-0
[ 13.312] (--) NVIDIA(0): CRT-1
[ 13.312] (--) NVIDIA(0): TV-0
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0) (connected)
[ 13.312] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV encoder: (null)
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): 155.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): Internal Single Link TMDS
[ 13.312] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13.312] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 13.312] (**) NVIDIA(0): been enabled on all display devices.)
[ 13.312] (==) NVIDIA(0):
[ 13.312] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 13.312] (==) NVIDIA(0): will be used as the requested mode.
[ 13.312] (==) NVIDIA(0):
[ 13.312] (II) NVIDIA(0): Validated MetaModes:
[ 13.313] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 13.313] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 13.314] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +152
[ 13.328] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 13.328] (--) NVIDIA(0): option
[ 13.328] (--) Depth 24 pixmap format is 32 bpp
[ 13.338] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 13.338] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 13.338] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 13.338] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 13.338] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 13.338] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 13.338] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 13.338] (II) NVIDIA(0): Config Options in the README.
[ 13.338] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 13.486] (II) Loading extension NV-GLX
[ 13.541] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 13.541] (==) NVIDIA(0): Backing store disabled
[ 13.541] (==) NVIDIA(0): Silken mouse enabled
[ 13.541] (==) NVIDIA(0): DPMS enabled
[ 13.542] (II) Loading extension NV-CONTROL
[ 13.542] (II) Loading extension XINERAMA
[ 13.542] (II) Loading sub module "dri2"
[ 13.542] (II) LoadModule: "dri2"
[ 13.542] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.542] (II) Module dri2: vendor="X.Org Foundation"
[ 13.542] compiled for 1.12.4, module version = 1.2.0
[ 13.542] ABI class: X.Org Server Extension, version 6.0
[ 13.542] (II) NVIDIA(0): [DRI2] Setup complete
[ 13.542] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 13.543] (--) RandR disabled
[ 13.543] (II) Initializing built-in extension Generic Event Extension
[ 13.543] (II) Initializing built-in extension SHAPE
[ 13.543] (II) Initializing built-in extension MIT-SHM
[ 13.543] (II) Initializing built-in extension XInputExtension
[ 13.543] (II) Initializing built-in extension XTEST
[ 13.543] (II) Initializing built-in extension BIG-REQUESTS
[ 13.543] (II) Initializing built-in extension SYNC
[ 13.543] (II) Initializing built-in extension XKEYBOARD
[ 13.543] (II) Initializing built-in extension XC-MISC
[ 13.543] (II) Initializing built-in extension SECURITY
[ 13.543] (II) Initializing built-in extension XINERAMA
[ 13.543] (II) Initializing built-in extension XFIXES
[ 13.543] (II) Initializing built-in extension RENDER
[ 13.543] (II) Initializing built-in extension RANDR
[ 13.543] (II) Initializing built-in extension COMPOSITE
[ 13.543] (II) Initializing built-in extension DAMAGE
[ 13.547] (II) Initializing extension GLX
[ 14.003] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.003] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.003] (II) LoadModule: "evdev"
[ 14.004] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.022] (II) Module evdev: vendor="X.Org Foundation"
[ 14.022] compiled for 1.12.3.901, module version = 2.7.3
[ 14.022] Module class: X.Org XInput Driver
[ 14.022] ABI class: X.Org XInput driver, version 16.0
[ 14.023] (II) Using input driver 'evdev' for 'Power Button'
[ 14.023] (**) Power Button: always reports core events
[ 14.023] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 14.023] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.023] (--) evdev: Power Button: Found keys
[ 14.023] (II) evdev: Power Button: Configuring as keyboard
[ 14.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.023] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.023] (**) Option "xkb_rules" "evdev"
[ 14.023] (**) Option "xkb_model" "evdev"
[ 14.023] (**) Option "xkb_layout" "fr"
[ 14.023] (**) Option "xkb_variant" "latin-9"
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 14.121] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.121] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.121] (II) Using input driver 'evdev' for 'Power Button'
[ 14.121] (**) Power Button: always reports core events
[ 14.121] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.121] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.121] (--) evdev: Power Button: Found keys
[ 14.121] (II) evdev: Power Button: Configuring as keyboard
[ 14.121] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 14.121] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.121] (**) Option "xkb_rules" "evdev"
[ 14.121] (**) Option "xkb_model" "evdev"
[ 14.121] (**) Option "xkb_layout" "fr"
[ 14.121] (**) Option "xkb_variant" "latin-9"
[ 14.122] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event0)
[ 14.122] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.122] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.122] (**) Genius Multimedia Keyboard: always reports core events
[ 14.122] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event0"
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.122] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0/event0"
[ 14.122] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 8)
[ 14.122] (**) Option "xkb_rules" "evdev"
[ 14.122] (**) Option "xkb_model" "evdev"
[ 14.122] (**) Option "xkb_layout" "fr"
[ 14.122] (**) Option "xkb_variant" "latin-9"
[ 14.123] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event1)
[ 14.123] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.123] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.123] (**) Genius Multimedia Keyboard: always reports core events
[ 14.123] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event1"
[ 14.123] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.124] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.124] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1/event1"
[ 14.124] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 9)
[ 14.124] (**) Option "xkb_rules" "evdev"
[ 14.124] (**) Option "xkb_model" "evdev"
[ 14.124] (**) Option "xkb_layout" "fr"
[ 14.124] (**) Option "xkb_variant" "latin-9"
[ 14.125] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event5)
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 14.125] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse'
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event5"
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.125] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 14.125] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 10)
[ 14.137] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4
[ 14.138] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.138] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.305] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 14.306] (II) NVIDIA(GPU-0): Vision stereo.
[ 14.306] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.306] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 14.306] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.774] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 19.774] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.774] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.774] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 19.774] (**) NVIDIA(0): been enabled on all display devices.)
[ 41.273] (II) evdev: Power Button: Close
[ 41.273] (II) UnloadModule: "evdev"
[ 41.290] (II) evdev: Power Button: Close
[ 41.290] (II) UnloadModule: "evdev"
[ 41.293] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.293] (II) UnloadModule: "evdev"
[ 41.300] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.300] (II) UnloadModule: "evdev"
[ 41.303] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Close
[ 41.303] (II) UnloadModule: "evdev"
[ 41.793] Server terminated successfully (0). Closing log file.
The error appear to be where it says
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
This file (server-0.xkm) actually does not exist on the system, BUT: it also does not exist on my others Arch installations and it works fine, without errors.
By the way: here is the keyboard-entry in the /etc/X11/xorg.conf.d/10-evdev.conf
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin-9"
EndSection
Et voilà. Can somebody help ?
Last edited by kero (2012-09-27 17:39:38)

Probably because "latin-9" doesn't exist?
# nano /usr/share/X11/xkb/symbols/fr
xkb_symbols "latin9" {
include "latin"
include "nbsp(level3)"
name[Group1]="French (legacy, alternative)";
key <TLDE> { [ oe, OE, leftdoublequotemark, rightdoublequotemark ] };
key <AE01> { [ ampersand, 1, dead_acute, periodcentered ] };
key <AE02> { [ eacute, 2, asciitilde, Eacute ] };
Try it without the dash (without the "-").
And don't forget to mark it as solved (by editing the first post).

"unable to load labview project" in Deployment Machine

Hi all,
well the Deployment Target works fine on Development machine
But has problem Loading on the Deployment System "unable to load labview project"
has anyone had similar issues and ound a soln.
NI Support has not responded yet to the solution.
Attachments:
unabletoload.PNG ‏17 KB

Hi aparab,
I think I will need more information to solve this issue.
You told "NI Support has not responded yet to the solution." Do you already have a service request number of the NI support?
Can you post your project? Which RT-target do you use? Which hardware?
You can also post a MAX report of you windows computer and one of your target:
1. Start -> Programs -> NI MAX
2. File -> create protocol -> choose technical support and my system (development computer) -> next -> next -> choose path -> next -> finish.
3. File -> create protocol -> choose technical support and your RT-target (real-time system) -> next -> next -> choose path -> next -> finish.
Best regards
Suse
Certified LabVIEW Developer (CLD)

Grouped shots messed next time I load the project

I'm working on a tight schedule on this one, and for the first time I thought I'd go with grouping shots. JPO, you can harass me and give me a spank for not doing that earlier, at a later time.
So, I've grouped a bunch of shots before I started grading, and due to some personal issues that came up, I had to make it a wrap for that day being. Next day I loaded the project, all fine, except some shots are grouped in some REALLY strange manner. Shots that aren't anything like the others are in the same group, and I gotta group them all over again. Not a big deal as I've selected the shots, moved them away from each other and pressed 'G' - but the fact that I gotta regroup every single group (there's about 40-50 of them) is a bit... demotivating. I accidentally managed to do a new grade and drag it on a group, with a set of shots that should've been graded in a different style.
Frustrating ? A bit. A little inch, maybe. But I'll survive.
It all boils down to: Am I doing something wrong, or is it just Color's way of doing things, and I gotta ungroup them when I'm done grading a group?

Ahaa.. I guess I was wrong about you then. My apologies. I'm not usually a groupie myself, but I've read (or was it a video showcase at Apples website?) about someone using groups and saying something like "It's SO fast to make adjustments to an entire set of shots". And it is... just so annoying to see all those noodles being hooked up with the wrong group.
Also, you're using a fancy Tangent panel? That's probably speeding up everything quite well I guess. If I only could afford one... *mumbling and shuffling away with head down and hands in the pockets*

Unable to load the data into Cube Using DTP in the quality system

Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
Satyaprasad

Hi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad

Unable to load the kernel module 'nvidia.ko' [SOLVED]

After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
cat /var/log/nvidia-installer.log
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
from the one used to build the target kernel, or if a driver such as
rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
installed in this system is not supported by this NVIDIA Linux graphics
driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: rivatv was loaded and obtained ownership of the NVIDIA
NVRM: device(s).
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Last edited by wsims (2010-06-22 15:06:04)

if you used the packages from repos, the blacklist is done automatically in nvidia,
$ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
/etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
$ cat /etc/modprobe.d/nouveau_blacklist.conf
blacklist nouveau
but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
Last edited by wonder (2010-06-22 14:10:01)

Unable to load the vertipaq engine because there was a COM exception . Return argument has an invalid type.

Hi All,
I have been using powerpivot for months (2010 PowerPivot on Excel 2010, with Sql 2008). I tried to open powerpivot today and get the following below. I have already tried uninstalling powerpivot and reinstalling it to no avail.
Any suggestions would be appreciated. Thanks, Ivan
Unable to load the vertipaq engine because there was a COM exception while loading....
============================
Error Message:
============================
Return argument has an invalid type.
============================
Call Stack:
============================
   at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
   at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Office.Interop.Excel.WorkbookConnection.get_OLEDBConnection()
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================

Hi All,
For anyone who this happens to, what ended up fixing it was uninstalling and reinstalling excel. I was using excel 2010, so I did this
Go to add/remove programs
Highlight Microsoft Office Professional 2010
Click Change
ensure Add remove features is selected and click continue
click on the little arrow beside excel and click on Not Available, click continue
After it is done, excel will be uninstalled.
When this is done, you can do the same process again, but this time chose the other appropriate selection
instead of not available. I chose Run All from My Computer.

Unable to load the Vertipaq engine because there was a COM exception while loading

I saw a similar thread on the forum but it's a dead end.
PowerPivot for Excel 2010 gives me this error whenever I click the PowerPivot window icon:
Unable to load the VertiPaq engine because there was a COM exception. This might happen if you load a workbook on a corrupt installation. To fix the problem, uninstall and then reinstall PowerPivot. Click Details for more error information.
============================
Error Message:
============================
Could not load file or assembly 'msmgdsrv, Version=9.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
The type initializer for 'Microsoft.AnalysisServices.BackEnd.DAXServices' threw an exception.
============================
Call Stack:
============================
   at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
   at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================
I've tried everything that was suggested so far: uninstall and reinstall PowerPivot, Microsoft Office 2010, and all of the prerequisites for PowerPivot (NET Framework 4.0, Visual Studio) and it still gives the same error message.
Thing is, I don't think it is a PowerPivot issue because many people in the office use PowerPivot and they all receive the same error message.
We are all running on Windows 7 Pro 64-bit.
Any help and/or assistance would be greatly appreciated.
Thanks,
Seong Lee

I saw a similar thread on the forum but it's a dead end.
PowerPivot for Excel 2010 gives me this error whenever I click the PowerPivot window icon:
Unable to load the VertiPaq engine because there was a COM exception. This might happen if you load a workbook on a corrupt installation. To fix the problem, uninstall and then reinstall PowerPivot. Click Details for more error information.
============================
Error Message:
============================
Could not load file or assembly 'msmgdsrv, Version=9.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
The type initializer for 'Microsoft.AnalysisServices.BackEnd.DAXServices' threw an exception.
============================
Call Stack:
============================
   at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
   at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================
I've tried everything that was suggested so far: uninstall and reinstall PowerPivot, Microsoft Office 2010, and all of the prerequisites for PowerPivot (NET Framework 4.0, Visual Studio) and it still gives the same error message.
Thing is, I don't think it is a PowerPivot issue because many people in the office use PowerPivot and they all receive the same error message.
We are all running on Windows 7 Pro 64-bit.
Any help and/or assistance would be greatly appreciated.
Thanks,
Seong Lee

Unable to load the project. latter is probably damaged or contain outdated elements

Similar Messages

Maybe you are looking for