Unable to load website!!

I recently installed Snow Leopard onto my laptop and ever since I have installed it, Facebook isn't loading. It says that "Safari cannot connect to the server". I had pinged it and it said "Permission Denied". The parental controls and firewall is off. Can anyone help me out? Thanks!!

Thanks for the suggestions,
I tried the wildcard *.domain for the site and this didn't help (tried it internet, trusted, local).
Local Admin didn't do the trick either..... the vendor is insisting that certificate is valid and installed correctly, they asked me to clear SSL state as well which I did and again still doesn't work.
I've tried using Fiddler to see where the web traffic is going, just in case it was looking for another domain that was in a lesser security zone but all traffic seems to be going to the domain I have already entered in trusted sites.
So my issue is still as follows, if anyone has any further suggestions.
Certificate is installed in the personal store for the user, the vendor says its valid. When we access the website, we are prompted to verify the certificate is correct (press ok to continue, cancel etc). If we hit ok, we get page not displayed. If we hit
cancel, it takes us to the alternate way of gaining access, via a username and password form. We don't have a username / password however as our method of access is certificate.
We can access this site perfectly in XP and I have copied (as far as I can see) the same security zone settings from our XP Trusted Sites GPO to Windows 7 Trusted Sites GPO, it just refuses to work in Windows 7 for some reason. I'm not sure if some other
lockdown setting outwith the security zone settings is causing something funny to happen?
Thanks in advance.

Similar Messages

Saying i am unable to load websites because certain websites are forbidden

i bought the comp of of someone and certain websites it says are forbidden,but the ones i would like to use are silly like you tube and radio stations and it will not allow me,and i dont know how to change the settings

You can check the connection settings and make sure that you do not use a proxy.
*Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]
You can also check the settings in security software to make sure that you aren't getting blocked there.

Unable to load some websites after an update to IOS6

I am unable to load some websites in both Safari and Google Chrome. This did not bother me until I found at that I cannot access some websites I can access before and frequent. I am unsure if this was caused by the update to ios6, but this incident only happened after the update. I am unsure as well if this is related to the problem of me unable to connect to itunes and app store after the update. I've fixed those by changing my DNS to 8.8.8.8 and changing the time trick. I've also noticed that twitter and some apps crashed a lot. I have no problem connecting to the wifi though. Thank you in advance.

Some additional details I have also noticed. Some images will not show or appears as a blue and white question mark in some websites. Even here in apple website.

I'm unable to load certain websites across all browsers on a MacBook Pro

Suddenly I'm unable to load certain websites (sundancechannel.fr, sundancechannel.tw, etc.) across all browsers—Safari, Firefox, Chrome—on my new MacBook Pro. Other computers on the same wifi can access those same sites fine.
I either get a won't connect to server message or a blank page.
Any idea what's going on?
I've thus far tried restarting the connection, clearing my cache, restarting the computer, deleting my history, and even getting in touch with the site owners.

Cambrey,
that HTML content shows that there’s no content at that Web site — it will only show the heading “301 Moved Permanently” and the single line “nginx/1.2.6”. I suspect that they might have wanted to include a redirection directive in that document, but for some reason, they didn’t. Your browsers are behaving as they ought to do with this Web site.
Have you considered trying www.sundancechannel.fr in your browsers instead of sundancechannel.fr?

Unable to load certain website (not really a safari problem)

As the subject says, this isn't a Safari problem but instead a general issue I have run into, so perhaps this is not the proper forum for it. But I have always received good help here before so I figured I would give it a shot.
I have recently (for about the past week and a half or so) been unable to load macosxhints.com which I previously had visited daily. I am able to access it from any other computer other than my own. I am behind a Linksys WRT54G router but other computers behind the router are able to access the site. After recalling that the site is now run by macworld I tried their site macworld.com and am unable to access that as well. I have manually configured my connection through the Airport so as to be able to consistently run port forwarding services such as remote desktop.
I am able to use the IP address 129.250.134.26 to partially load the front page, but most images are not loaded and it is painfully slow. I have tried an nslookup from my machine and it times out. I have absolutely no clue what to do beyond this point, but seeing as that website is part of my daily routine, it is quite annoying to be forced to go without it. Hopefully someone who knows a lot more than I do about how this stuff works can share some insight with me and solve this issue. Thank you.

What you actually want to be looking at is not the Static DNS but the DNS listings under the Status section. You should see it in a toolbar on the top of the website in the following order:
Setup Wireless Security Access Restrictions Applications & Gaming Administration Status
Click on that and you should see a bunch of things listed. At the bottom the list should be similar to this:
Login Type: Automatic Configuration - DHCP
IP Address:
Subnet Mask:
Default Gateway:
DNS 1:
DNS 2:
DNS 3:
MTU: 1500
As far as your router being connected differently than your computer, that is fine. What happens is your router is connecting to the outside world using PPPoE and your computer is connecting to your router using DHCP.

Firefox is unable to load any new websites

Every now and then after running normally for some time Firefox is unable to load any new websites. Instead I get the message "Verbinden..." (I use the German version of firefox). Internet Explorer works as usual when this happens. If I then close firefox I am unable to restart because the Firefox process is still running. Instead I have to stop Firefox running in Task Manager and then restart firefox. It usually works ok for while until it crashes again.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs

Firefox seems unable to load the halifax online banking website where as iexplore is able to do this is there and reason for this and can i do nething to make firefox do it?

Firefox seems unable to load the halifax online banking website where as iexplore is able to do this is there and reason for this and can i do nething to make firefox do it?

Firefox seems unable to load the halifax online banking website where as iexplore is able to do this is there and reason for this and can i do nething to make firefox do it?

Host: Unable to load application configuration + wrong install version on download

i am using 64 bit windows 7 ... when unable to playing video, it redirects me to the adobe download pages to get flash player ... the page says i am about to download flashplayer for win7 64 bit, of 9MB approximately, but the file i get has name "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) and this file just wont install it ends with error message: HOST: Unable to load application configuration ...
By google i found also file install_flashplayer11x64_mssd_aih.exe (NOTE THE NUMBER 64) ... this file runs the install, i get the final screen saying "installation completed" but after clicking the "finish" button i get an error message saying "an error occured while sending a command to the program" ...
I am just getting mad ... its 3 days i am trying to figure aout this problem ...
i also tryed files as "install_flash_player_11_plugin.exe" , "install_flash_player_11_plugin.msi" , "install_flash_player_11_active_x.exe" and "install_flash_player_11_active_x.msi" ... those files actually proceeds with the install, but at the end, the videos are still not displaying ...
When i am checking the plugins statuses in my firefox addons manager, it says Shockwave Flash is all right ...
The precedent version of flash player was working just fine, i do not understand why you must make such a mess every 2 months ...
How do i get work this?

yes, the pages is http://get.adobe.com/flashplayer/
the page says:
Adobe Flash Player 11.3.300.257 (9.36 MB)
Your system: Windows 64-bit , English, Firefox
but when i click the "Download now" button i get the file named "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) which wont start and after few seconds i get the message "HOST: Unable to load application configuration"
but finaly i solved the problem ... i just installed the file found by google on some private page "install_flashplayer11x64_mssd_aih.exe" (NOTE THE NUMBER 64)
(the page is here: http://www.ziddu.com/download/16693235/install_flashplayer11x64_mssd_aih.exe.html)
and after that i disabled the protected mode of flashplayer by adding a line in the cfg file
the howto is here: http://forums.adobe.com/thread/1018071
i must say its quite shameful one must get this torture to have movies playing on websites ... this cant happen at open source stuf, at least not for 3 days ...
and being already here and complaining, i must say also (i hope some adobe emploee will read this) i am quite disgusted (and i believe not only me) by adobes bad habit to provide other software than flashplayer, when they include mcafee antivir into the install ...
it is literally taking the user as a stupid one ...
if i will need an antivir, i will look for it ...
i just hate when some society tries to infiltrete in my comp some crap software counting on possibility that at the download i will not pay enough attention
its just ridiculous and shameful behavior

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flashplayer. With the Reader, I was able to find a different install

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XP

Use these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/

Unable to load Oracle.DataAccess

Hi ,
I have created a website project on .net framework 4.0 in Visual Studio 2010 . But I am unable to add reference the Oracle.DataAccess dll. It is continously throwing the error " unable to load assembly Oracle.DataAccess . The system cannot find the file specified. "
But when I tried adding the reference in a web application project , it gets added. But when run the project it is throwing the same error. On the web page the error thrown is this :
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess' could not be loaded.
=== Pre-bind state information ===
LOG: User =***********
LOG: DisplayName = Oracle.DataAccess
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: Oracle.DataAccess | Domain ID: 2
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
Any help on this , please.. I have been trying all sorts of things and nothing seems to workl.

BadImageFormatException occurs when you have a bit mismatch.
1) What is the TargetCPU set to when you compiled?
2) Are you running the app on 32 bit or 64 bit OS?
3) Confirm whether the app is running as 32 bit or 64 bit in the problem environment (open task manager, click the process tab, is there a *32 next to the name?)
4) Did you install 32 bit Oracle client or 64 bit Oracle client?
Cheers,
Greg

ITunes was unable to load dataclass information from Sync Services

Hi,
I have Iphone 3GS with the latest version 3.1.3 and iTunes 9.1. After i uograded my iPhone to the latest version i am not able to sync with the iTunes and receive the message "iTunes was unable to load dataclass information from Sync Services, Reconnect or Try later". I am using Windows XP with Symantec Endpoint protection.
I have tried following steps to troubleshoot the problem but all my attempts have failed,
1. Uninstall iTunes by Removing, iTunes, QuickTime, BonJour, iPhone congiguration Utility and Bonjour. Remove all the iTunes and related folder from the C:/ drive
2. Restart the computer and intall the latest version of iTunes and Quicktime
3. Restore the iPhone to the factory settings using iTunes
4. Restart the system as well as hard Boot the iPhone (Hold Start and Wake/Sleep Button)before connecting again
5. Repeat the Steps 1 and 2 after restoring the iPhone
I am still getting the same error and now I can't even open the first page for iPhone in iTunes when I connect it to my computer. All my content is still in iTunes but everything is lost on the iPhone.
I searched the Apple support and they talk about problem with the Symantec Endpoint. I have the latest version of Symantec endpoint way above what is mentioned on the Apple support page.
Can someone please help me, it seems restore worked for most of the people facing this issue, but for me even restore is not working.
With Regards,
Ankur

I got a present of an itouch. This is my first time back to apple after 5 years. I cant get my itouch to sync due to dataclass error on Windows XP pro. I have installed the latest version of itunes 9.2.1.
WHAT IS THE POINT IN OWNING A DEVICE FOR PLAYING MUSIC WHEN YOU CANT LOAD THE MUSIC !!!!!
Does anyone have a solution or alternatively (shock horror) Apple could actually get its AR*E in gear and fix the problem. I would also suggest that Apple would post a friggen solution on its website, but no that may be too much to ask.
very frustrated. any help gratefully received otherwise the touch gets thrown out.
thanks

Unable to load washington post, invalid url

unable to load Washington Post website. Get invalid URL message

This one? http://www.washingtonpost.com/
That's valid as can be seen from the image I've uploaded for you.

Unable to load youtube videos. Neither browsing nor the youtube app are working, this hapenned after I updated to iOS6

Unable to load youtube videos. Neither browsing nor the youtube app are working, the video start loading but nothing more happen. This issue is hapenning after I updated to iOS 6.

Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
And then try this.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
And ... Are you using the mobile YouTube website?
http://m.youtube.com/home

Impossibile caricare le informazioni del database (Unable to load datab...)

I built a report with a table of which I have only defined the structure of the fields in a file. Ttx.
from the website build and fill a dataset then step how ReportDocument's DataSource.
This works fine on development machine.
when I deploy on production server (win2008R2) where you installed the runtime CR13_0_2, I have always the error "Unable to load database information" and does not generate the report.

You can not use TTX based reports with CRVS2010. See the blog [How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/18897] for more details.
Reference KB: 1468232
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Office App Devlopment: Unable to load one or more of the requested types.

I'm receiving the following error with the default C# Office App for Word, Excel, Powerpoint, Project Task Pane
Error Code
Description
File
Line
Col
Project
1
Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\SharePointTools\Microsoft.VisualStudio.SharePoint.targets
438
5
AppName
I'm using
Microsoft Visual Studio Community 2013
Version 12.0.31101.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02129
Microsoft LightSwitch for Visual Studio 2013
Team Explorer for Visual Studio 2013   06177-004-0444002-02129
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02129
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02129
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02129
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02129
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02129
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
Windows Phone SDK 8.0 - ENU   06177-004-0444002-02129
Windows Phone SDK 8.0 - ENU
Application Insights Tools for Visual Studio Package   1.0
Application Insights Tools for Visual Studio
ASP.NET and Web Tools   12.4.51016.0
Microsoft Web Developer Tools contains the following components:
Support for creating and opening ASP.NET web projects
Browser Link: A communication channel between Visual Studio and browsers
Editor extensions for HTML, CSS, and JavaScript
Page Inspector: Inspection tool for ASP.NET web projects
Scaffolding: A framework for building and running code generators
Server Explorer extensions for Microsoft Azure Websites
Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Microsoft Azure
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.2.21010.0
For additional information, visit http://www.asp.net/
Common Azure Tools   1.3
Provides common services for use by Azure Mobile Services and Microsoft Azure Tools.
Microsoft Azure Mobile Services Tools   1.3
Microsoft Azure Mobile Services Tools
NuGet Package Manager   2.8.50926.663
NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
Office Developer Tools for Visual Studio 2013 ENU   12.0.31105
Microsoft Office Developer Tools for Visual Studio 2013 ENU
PowerShell Tools   1.3
Provides file classification services using PowerShell
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.41012.0
Microsoft SQL Server Data Tools
Windows Phone 8.1 SDK Integration   1.0
This package integrates the tools for the Windows Phone 8.1 SDK into the menus and controls of Visual Studio.
From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
Any help would be much appreciated and also let me know if I can give more info!

Hi mngfinney,
>> From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
I’m trying to reproduce your issue but failed.
Here is my steps:
#1 Install Microsoft Visual Studio Community 2013
#2 Install Microsoft Office Developer Tools for Visual Studio 2013
#3 Create a new Apps for Office project and rebuild
According your error message, the failed step is ValidatePackage, I suspect it is an environment issue, but I cannot identify the root cause basing on the information you post.
Have you tried to re-install the Visual Studio and Microsoft Office Developer Tools for Visual Studio 2013 or test it on another machine with Microsoft Visual Studio Community 2013?
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to load website!!

Similar Messages

Maybe you are looking for