Unable to open bable fish hd on IPAD2
Unable to open bable fish hd on IPAD2, help.
Hello davidlcronin,
The following article can help resolve most issues you may encounter with apps from our App Store, such as apps that won't open.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Cheers,
Allen
Similar Messages
-
Help: Unable to open documens in Pages on iPad2
Hi, everyone. About 10 minutes ago I've been unable to open any of the documents I have in Pages, Numbers, and Keynotes on my iPad 2. Is anyone experiencing the same problem and has any solution to this? Thank you for your cooperation - ysoerjoatmodjo
An immediate remedy would be to download Libre Office, then you can work while investigating Pages issues.
-
ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me
Having the same issue, can someone please enlighten us?
-
Unable to open app store and iTunes in Ipad2
i have tried following things yet unable to open appstore. it keeps on forever loading. same story with itunes too on the Ipad
1. Rebooted the device
2.Resetted my Ipad and started a fresh with new apple id
3. Resetted internet settings
Point to be noted is that i am able to browse hassle free
Any solution to this..???Try this:
1. Go to Settings>General>Date and Time>Set Automatically>Off
2. Set the date ahead by a few months
3. You should then be able to connect to the store -
Unable to open Numbers file in iCloud using Numbers 2.3 (iWorks 09)
Using my iMac (OS 10.8.5) and Numbers (2.3), I am unable to open a Numbers file built on my iPad2 (7.1.1) and stored on iCloud. I get an error message indicating that I need to upgrade Numbers on the iMac. The version available to download on the App Store is 3.2.2 and seems to require Maverick to run. i don't really want to spend the money on either, but will if I have to obviously. (DISLIKE). Are there other options? And will the upgrade also force me into iOS 8?
Thanks in advance.Hi Reefkeeper,
You will need Mavericks to use Numbers 3. I don't use iCloud right now but it seems some users are experiencing difficulties at the moment with the iOS 8 upgrade. To Use Numbers in iCloud you will need iCloud Drive which requires iOS 8 and Yosemite on the Mac. Yosemite is not out yet.
I sync my Numbers files between my iPod and Mac using iTunes and file sharing. It is a little clunky but gets the job done. You can also email files.
It has been said on these forums that Numbers 3 is a free upgrade- I can't remember. I don't do a lot of printing or find and replace and Numbrs 3 has suited me very well. It is said to be more applescript friendly and of course that whole cloud thing. '09 will still be on your computer.
quinn -
Hello,
I installed a theme on OS X Lion that was actually made for snow leapor, because on a youtube video someone said it works with Lion too,
After installing it I got problems seeing close and minize icons.
And After reinstalling my Macbook pro, I am unable to open finder, Safari, Terminal etc.
I have tried to get help from several help forums, and tried changing files as described here
https://discussions.apple.com/thread/3256533?start=0&tstart=0
Theme was downloaded from here
http://www.fif7y.com/themes/sog/Okay, it's both for your first question: When I import the songs to the library, the songs are not in the correct order as they were on the CD. And, in the process of my importing the songs, the library scrambles the songs in different sections of the library (I explain further below)
I don't know what you mean by "little triangle" pointing up or down. What's that got to do with the price of fish in China? lol
When I get the music in the library the songs come out sorted this way: 2 songs from CD 1 appear one section of the library, then 1 song from CD 2 appears in the next column, along with the album work. Then, I go down farther, and there's a few more of the songs from CD 1 in the next section. I go down again, and maybe 2 or 3 songs are in that column. Along with the artwork for that CD. Then I scroll down again in the library, and there's maybe 3 or 4 songs from CD 1 there. Get the picture? It keeps sorting the songs in that order. And yes, the CDs I was importing were compliation dance CDs, along with some from the same artist, like Barry Manilow.
I hope I answered the questions better so that you can help me Thanks in advance, Glenn -
Unable to open my Nemo's reef for last 4days. Has anyone else had this problem
Unable to open my Nemo's reef for last 4days. Has anyone else had this problem. It seemed to occur after the last content download
I too have been unable to open Nemo's Reef properly since January 31 2014. I have used it without problems since August 2013. I recall it self updated around midday and then ever since it's failed to get beyond the opening page of what's in the reef. If I tap the back button it goes back to the iPad screen of apps. If I tap to buy a suggested plant it also disappears from the screen. However I have managed to collect my pearl gifts/sand dollars daily on that initial screen.
I just cannot buy a plant or get out of this screen without the crash. Just going nowhere.
Rather frustrating at level 37 and about £80 overall spent in pearls to build the reef and get beautiful fish whilst recovering from surgery past six months. I have found the game very calming. I've really enjoyed this game which past level 8 is surely intended for adults and more strategic play.
This morning I switched on and there was instead a full screen advert. I hit the x button and it just crashed again. Now it shows my own reef on loading, but instantly crashes even faster.
Is this an iPad problem or an apple problem. From an Apple point of view FWIW I have noticed my screen gets very hot when playing games such as Bejewelled Blitz too.
It would be good to know if others have this nemo or/ and overheating iPad problem too. What is the solution? -
I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?
The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC -
Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio RamosReinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
I am unable to open Icloud on my PC with Windows 7 but have it installed
I am unable to open Icloud on my PC with Windows 7 but have it on my Iphone & Ipad working OK
Please helpThe menu selection only shows the other options if you already have a selection active; a selection made with one of the available tools like lasso or quick selection. First select with the tools, then use the menu 'Select'.
-
I installed iOS7 on my iPhone5 and now I am unable to open iTunes - the screen just stays blank.
I have checked date and time and wifi settings.
Not sure what else to do.
I do have iMatch active on my device and its working fine on my other iPohne with iOS7 installed.
Any help please!Have you tried logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then logging back in ? If it's still the same after that then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
-
Unable to open Apple application
Last week, I did the most current software updates. Ever since then, I have been unable to open certain Apple programs such as iChat, Skype, Preview, Pages, Photo Booth, etc. I have tried to download AIM, but the computer says it isn't supported. Also, now when I try to open Photo Booth, it says my graphics card doesn't support it, but I have never changed the card from the one the computer came with. The programs will open up, and then immediately quit, and I am left with "The application _____ quit unexpectedly" message. No matter how many times I relaunch and reset, ignore, or report, I can't get them to open. I'm in college and really have no way to get to a Genius Bar for a few more weeks, and I don't have the Leopard disk with me. Is there any way I can fix this on my own? Thanks!
I think it was the repair disk permission that actually worked for me. I tried it once and got no result, and then tried to download the updater. For whatever reason, I couldn't even download that. So I went back and did the disk permission repair again. It still didn't seem to work, so I just turned the computer off out of frustration. When I turned it back on, it was all fixed. So I'm not entirely sure what it was that fixed it...all I know is it works now!
-
Error unable to open script file
I have been using DW8 since it came out. I am running Windows 7. Everything was working fine until I had hard drive failure. Replaced hard drive reinstalled Windows and DW8. Now when I try to insert an image I get the message "unable to open java script file c:\program files\Macromedia\Dreamweaver 8\configuration\objects\common\AccessibleImage.js (error 2)".
I have done the usual--rename config file--reinstall DW8--clean register and reinstall--run as admin.--run in compatibility with XP SP2, etc. but nothing works.
Help would be invaluable to me.Your version isn't listed here but something on this page may help you...
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
Maybe you are looking for
-
How Can I add/change text/description in accounting view of Vendor master ?
/nxk02 --> (give vendor, company code ) then check the check box of 'Accounting info' under Company code data block --> then hit 'Enter' --> it goes to next screen. Then in this screen, click menu 'Extras' --> then press "Texts" under that menu.
-
I am frustrated having paid for "Clean My Mac" which I run regularly and using tips like cleaning the cache in Terminal view. It is still getting slower. Can I clean off the disk and reinstall from my Time Machine, or will it re load the problem to
-
Storing 6 millions values in SQL server columns
Hi, How many values (size) I can store in single SQL server column. My Scenario, Column1 Column2 Column3 1 ABC 1,2,3,........(6 millions values) 2 CDE 1,2,3,.......(6 millions values) and problem is that I can'
-
I have a requirement where I need to insert some text into a JTextPane within its DocumentListener. I read somewhere that this is not a good practice. What would be the right way of doing this? Basically, I'm listening to what user is typing and help
-
Please help with Graphs in Reports 9i
I am utilizing Reports 9i ( 9.0.2.0.1) to add simple graphs (i.e. bar graphs) to existing reports being produced in a PDF format. I am having problems resizing graphs and editing them. I have tried to resize them in the layout model, but the graph ge