Unable to open documents after Update to OSX 10.9

I have updated my iMac to OSX 10.9 (Mavericks)
This has resulted in a large number being unavailable for access.
I cannot open a number of from Pages, Numbers, Keynotes etc
Is there a quick shortcut, and a central place to adjust these
Beano

Do note that the updater saved the iWork '09 apps in a separate folder. Also, note that the new ones are crippled to match up with their iOS counterparts; i.e., dumbed down. See these for details:
http://www.betalogue.com/2013/10/24/pages-5-disaster/
https://discussions.apple.com/thread/5468056?start=0&tstart=0
http://9to5mac.com/2013/10/25/new-iwork-ilife-apps-go-for-simplicity-upset-power -users-all-over-again/#comments

Similar Messages

Unable to open itunes after update

unable to open itunes after update

I had a user with the same issue after updates and I was able to resolve.
I copied QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
I did so after uninstalling and re-installin, but I don't beleive that was necesssary. Thanks to user thurdy. This fix was from apple support for the error "iTunes stopped working". Figured I'd give a shot and it ended up working.
For reference the user was receiving the following errors exactly:
"the procedure entry point ?fastfree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll"
and
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error127)"

Unable to open documents after scanning

I am unable to open my documents after scanning. I keep getting the message Adobe reader could not open because it is either not a supported file type or because the file is damaged, then it redirects me to a buya subcription Adobe reader XI. These documents are just regular standard 3 to 11 gray scale scans, nothing special. I just need my regulay Adobe reader to open A PDF file. Please help.

just to clarify, you're scanning a document and then you are saving that as a pdf file, correct?
in particular, you are not trying to add the scanned document to an already existing file (pdf or otherwise), correct?
if yes and yes and your reader and can that pdf ok, you have a scanner problem. try updating your scanner's drivers.

Unable to open Store after updating KB2919355

Hi
I updated the my Windows 8.1 Pro with KB2919355 (798MB)
on 25-Apr-2014 and after that I am unable to open Windows Store.
I tried to use the following methods
1.   (a) Register $Env:SystemRoot\WinStore\AppxManifest.XML
      (b) start "" "ms-windows-store:"
2. wsreset through Windows+R and also through Command Prompt (Admin)
3. Windows App Trouble-shooter
Each of the methods followed by restart.
Finally,
1. I am unable to open the Windows store
2.  Running the store hangs-up the system
Also tried the Microsoft's Live chat but could not get any solution.
Please suggest if there is any solution.

Hi,
Here is a related KB article below I suggest you refer to:
The Store app crashes after you upgrade to Windows 8.1
http://support.microsoft.com/kb/2892082/en-us
If this KB couldn't help you solve the issue, I suggest you troubleshoot this issue in Clean Boot mode.
More information for you:
Store not opening after upgrade from windows 8 pro to 8.1 pro.
http://social.technet.microsoft.com/Forums/windows/en-US/40091b49-4658-4432-ae5e-d01ce519eae4/store-not-opening-after-upgrade-from-windows-8-pro-to-81-pro?forum=w8itprogeneral
Windows 8 Store Won't Open
http://social.technet.microsoft.com/Forums/windows/en-US/68a680e7-3e3e-4af3-be97-147e5571812c/windows-8-store-wont-open?forum=w8itprogeneral
Best Regards,
Amy

[Solved] Unable to open JPEGs after update

I ran an system update today, and I am now unable to open JPEGs. For example, nitrogen can set PNGs as the current wallpaper, but not JPEGs. In the terminal, the error:
(nitrogen:5408): glibmm-CRITICAL **:
unhandled exception (type Glib::Error) in signal handler:
domain: gdk-pixbuf-error-quark
code : 3
what : Couldn't recognize the image file format for file '/dc/media/wallpaper/background.jpg'
is given whenever I try to set a JPEG as wallpaper. Furthermore, mirage doesn't recognize JPEGs as existing.
During the update, libjpeg-turbo was installed, and I am wondering if this might have something to do with this.
Anyone have suggestions?
Last edited by hbweb500 (2011-03-06 06:59:03)

Could you please rebuild one of those programs which doesn't work anymore against libjpeg-turbo? In case that solves the problem, it would be very helpful for Allan to know. But in my opinion this is definitely something for the bugtracker!

Can't open documents after update to 3.1

I'm currently using a Macbook Pro. After I've updated to Numbers 3.1, my previous documents cannot be opened in either this version or the earlier (2.3). The programme will just hang and then shut down by itself.
Anyone has similar issues or know of a solution? I've urgent work pending and it's incredibly frustrating.

Might try uninstalling and then reinstalling from the App Store.
This might help:
http://www.macobserver.com/tmo/answers/how-to-uninstall-remove-mac-os-x-programs -and-applications
Among other things, buried in there, it tells you to delete this: ~/Library/Container/com.apple.iWork.Numbers
Make sure to restart the computer afterwards.

TS3103 I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

Please see
https://discussions.apple.com/thread/4311280?tstart=0

Unable to open document. Please check to see if you have read permission for the above file.

System:
Adobe Acrobat X Pro, 10.1.2
Windows 7 Enterprise, 32-bit
Quad Core badass CPU
4GB RAM
MS Word 2010 (Office 2010)
I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
"Unable to open document:"
"[document location]"
"Please check to see if you have read permission for the above file."
This happens after the little notice pops up "Starting the application which created the document...."
If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
"I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
I have updated to the latest version 10.1.2 and still have this problem.
This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
If anyone has found the solution, please post it here.
Thanks!
B

I think I found a solution. It seems to be relatet to normal.dotm.
In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
(By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

Pages won't let me open a document, says "unable to open document"

Pages for my iPad 2 is preventing me from opening one specific file. I reaaally need that file back but I can't open it or transfer it anyway. Every time I click on it it says "unable to open document." Pleaaaase help!

Hey mate, do you already have iCloud enabled? If not, then do as RickHanson-Sacto mentioned about and see how you go,
If iCloud was already enabled, then you've possibly run into the same issue I just had. I opened up Pages & Numbers on my iPad, and all the icons were black. Clicking on any of them gave me the 'Document can't be opened' message. If I signed into iCloud.com, I wasn't able to download the documents either.
After a lot of messing around, it seems like it was something to do with file conflicts, and maybe they caused problems when I updated to iOS 5.1 or the new Pages/Numbers App updates? I don't know, but somewhere along the line, the file conflicts were blocking all documents from being accessed.
The way I fixed it was to fire up Pages & Numbers on my iPhone. It showed me my documents, but when I clicked on them, they told me there were conflicts in the files, and presented me with two options, one a black icon, the other a normal document icon. I clicked on the normal one, and the document seemed to open and load. Additionally, with Numbers at least, the files all updated on the iPad too, and all the documents could now be downloaded via iCloud.com. I had an issue with Pages on the iPad, in that it wasn't updating the documents as I was fixing them on the iPhone, so I simply uninstalled Pages on the iPad, and then re-installed. Once iCloud was enabled, all the documents loaded up properly.
I really can't say if this is the same issue you are experiencing, but I figured I'd mention it.. just in case!!
And another tip.. until iCloud gets fixed-up good 'n proper, for your own piece of mind, whenever you edit a document in Pages/Numbers/Keynote, just before you finish-up, hit the 'wrench' icon, choose the 'Share and Print' option, and then click 'Save to iTunes'. Choose the first file type, and it'll save a copy in a different location on your iPad. That way, if a file gets corrupted by Pages or deleted/corrupted by iCloud, you can simply click the + button on the Documents page, and select 'Copy from iTunes'. This will show you all the documents you saved. They also show up in iTunes should you want to pull them off the iPad quickly.
Sorry if this is no use to you, I hope you manage to get something back!

I am unable to open the latest update (10.4) iTunes not properly configured

when I attempt to open it says iTunes was not properly configured and then close - I can't reinstall 10.2 since 10.4 in installed; it won't repair because mid-way thorugh it pops up "itunesresources is not an accessible file... make sure you have access to this file" and stops the repair.
any thoughts?
I HAVE used 10.4 since upgrading - I shut down my computer; when I rebooted a few days later, this is what happened...

Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Unable to open documents in InDesign CC

Have been using CC for over a year. Suddenly I am unable to open documents I created InDesign CC (as recently as last week).
I updated O/S to Mavericks at the weekend.
This is a HUGE problem! Any ideas how to fix?

Please let me know if I can provide any more information.
Help > System Info
What have you done for general trouble-shooting so far?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Unable to open Pages after new hard drive

I am unable to open pages after recently having to get my hard drive replaced. I have a time machine that I could get the application/files off of, but when I try to open it it comes up with the message:
"Check with the developer to make sure Pages works with this version of Mac OS X. You may need to re install the application. Be sure to install updates for the application and MAC OS X"
I have done all the software updates possible for both MAC OS and iworks compatibility, and nothing has worked. I do not have the original CD with me, so I cannot reinstall. Is there any other way to get the working version of the application off of my time machine?

(1)
Enter mac App Store and check if it state that Pages is installed on your machine.
If it does, you may download Pages 4.0.5 thru this channel for free.
(2)
Assuming that you aren't far from your original DVD for a long time, you may remove every files related to iWork '09 with my uninstall script
then
download and install the trial version,
don't run it
Trigger Software Update to download and install the required updater.
I apologize but I don't remember if the updater 9.0.5 apply the entire required changes.
After that you will have an up to date package which you will be able to use during 30 days.
When you will be back home, re-apply my uninstaller
install the package from your DVD
don't run the apps
Trigger Software Update to download and install the required updater.
After that you will have an up to date full time package.
To get my uninstaller,
go to my iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 22:42:02
Please :
Search for questions similar to your own before submitting them to the community

Display is wrong on the shadow side after updating to OSX 10.9.2

After updating to OSX 10.9.2, Aperture 3.5.1 begins to display wierd shadows. Even if the value of the black point is set to 0, the black appear to be blotching although there is no clipping appearing in the histogram. Lightroom and other 3rd party programs appear normal.

I shoot raw and I use a Canon 5D Mark II. Here is a grab from one of the pics. Note the muddy color of the green in the shadow and the black and the surrounding. This is not so when opened in lightroom or any other raw processing software.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

Unable to open documents because of missing plug ins

I am unable to open documents in CS3 (version 5.04)
I am getting a message:"Missing Plug Ins: Conditional Text.InDesignPlugIn, WorldReady.InDesignPlugin.
The document "xxxxx.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?"
If I click on OK I get another window, stating "Cannot Open File", a list of all kind of missing Plugins and the message "Cannot open "xxxxx.indd". Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign.
I don't want to switch to CS4 and as far as I know version 5.04 of CS3 is the latest.
Any ideas of what I could do to get the latest PlugINs or anything else that would help?
Thank you!
Anne

Probably, but it's 100% not necessary when going from CS4 to CS3. It might be a case of 'half read, then half-understood'.
As this is a really frequent question and there are still no sticky posts: anyone up for a "feature request" that makes InDesign check the version number before opening? (Of course that wouldn't work backwards to CS3. Still, it'd avoid these kind of posts when CS6 comes out. Note: not CS5, because that would have no problems opening CS4, but CS4 would have problems with Cs5! Oh, for planning ahead ... )

Unable to open documents after Update to OSX 10.9

Similar Messages

Maybe you are looking for